Indian Institute Of Science Tender

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments. 1.5 Sq mm (Make:KEI/Havells/Gems Cab/Polycab)

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Sheath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) (Make:KEI/Havells/Gems Cab/Polycab)

Supply of Warm White , UV Protection LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly carbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 3000K to 3500K, IP66 optical and electrical compartment & impact resistanceof complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection - Min 5KV along with Over voltage /Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40 mm to 50mm. Universal Voltage driver to operate wide voltage range from100V to 270V 50 / 60Hz application. Compliance to IS 10322 / IEC60598, LM79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency > 130 Lm/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL /CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier word mark /name shall be Engraved /Embossing on the diecast housing/ Body part. Warranty of 2Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer &Cree / Nichia/ Lumileds /Osram make LED Source. LED Streetlight 25/30 W (Make:Havells / Philips / Jaquar / Bajaj)