Indian Institute Of Science Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Indian Institute Of Science - IISC Tender
Electrical Goods and Equipments
Electrical and Electronics
Eprocure
Opening Date6 Nov 2023
Closing Date28 Nov 2023
Tender AmountRefer Documents
Costs
EMD
₹ 1,53,793Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Supply,installation,testing And Commissioning Of 1x320 Kva Dg Set And Associated Electrical Works At Iap Building At Iisc
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_IISC_779779_1Bid Award Id
ViewTender No
IISc/IAP/01/2023Tender Authority
Indian Institute Of Science ViewPurchaser Address
-Website
http://https://iisc.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
c) Supply and Installation of thermal cladding materials 50mm thick glass wool and cladding of 24 gauge Aluminium sheet for the above pipe .
12
-
-
d) Materials 50 MM thick glass wool and cladding of 24 gauge Aluminium sheet
1
-
-
e) Erection of Silencer
1
-
-
Exhaust Pipe support : MS structural supports for Pipes,Silencers and bends with one coat of Red oxide primer and double coat of enamel paint .
2000
-
-
Earthing with GI earth plate 600mmx600mmx6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7metre long etc. with charcoal/ coke and salt as required.
4
-
-
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
150
-
-
Control Cabling (Copper Multistrand Armoured Cable) 650/1100V ,Grade conforming to IS-7098(part-1)1988. a) 4C x 2.5 sq mm (For Bus supply ,Master first start & LTA pump).
15
-
-
b) End termination kit suitable for the above cable with copper lugs and single compression gland.
2
-
-
Supplying and providing safety equipements such as 1.1 KV class rubber mat 1800 X 900 X 6.15mm thick for AMF panel, L.T.panel. Fire exstiguisher, 5Kg capacity, dry chemical powder type suitable for electric fire, suitably fixed on wall with necessary stand / brackets. Fire buckets filled with sand and necessary MS angle iron fabricated stand, restillation chart, standard first aid box, enamelled danger boards, etc.Completely as per statutory requiements of local electrical inspectorate or concerned approving authorities, accordingly.
1
-
-
Supplying, erecting, testing and commissioning of sheet steel fabricated (1.6 mm thickness) DG Change Over Panel, outdoor type with hinged front door with locking arrangements. The board shall be free standing type, dust and vermin proof, having provision for extension on both sides. The boards shall be supplied with the following equipments necessary bus bars, etc., including inter connections as required. The board shall be provided with detachable plate at top and bottom of cable alley, having adequate knockouts for facilitating conduit/cable entries. The board shall be fixed firmly on a 150mm high concrete pedestal with bolt and nuts, finished neatly with plastering etc., complete. The board shall be applied with one coat of primer after cleaning and degreasing the metallic surfaces and finished neatly with powder coated paint of approved colour.
Incoming Feeders
a) 630A, 4 pole, motorised moulded case circuit breaker, 50 KA, TM based with additional 2 nos and 2 NC auxillary contacts. (EB & DG incomer) (2 Nos.)
b) RYB phase indicator lamps set with switches and fuses.(Vaishnav or equivalent)(2 Sets)
c) ON/ OFF/ Trip indicating lamps set with switches and fuses. (2 Sets)
d) Multi data meter (A,U,KW & PF) and frequency. (2 Nos.)
e) Electrical / Mechanical interlocking system. (1 Set)
f) 800 Amps, Aluminium bus bars. ( RYB & N)(1 Set)
g)(1 Set) - Earth bus 25x6 mm copper (2 runs)
Outgoing Feeders
a) 125A, 4 pole, moulded case circuit breaker with RHOM, 25KA, TM based with additional 2 nos and 2 NC auxillary contacts.(1 No.) b) 100A, 4 pole, moulded case circuit breaker with RHOM, 25KA, TM based with additional 2 nos and 2 NC auxillary contacts. (Spare feeder) (1 No.)
c) 63A, TPN 10 KA, Miniature Circuit Breaker. (13 Nos.)
d) 40A, TPN 10 KA, Miniature Circuit Breaker. (Spare feeder) (2 No.)
e) 25A, TPN 10 KA, Miniature Circuit Breaker.(6 Nos.)
f) Digital direct KWH meter. (Elmeasure / Secure or equivalent) (15 Nos.)
1
-
-
Supplying, erecting, testing and commissioning of sheet steel fabricated (1.6 mm thickness) Sub DG Panel, outdoor type with hinged front door with locking arrangements. The board shall be free standing type, dust and vermin proof, having provision for extension on both sides. The boards shall be supplied with the following equipments necessary bus bars, etc., including inter connections as required. The board shall be provided with detachable plate at top and bottom of cable alley, having adequate knockouts for facilitating conduit/cable entries. The board shall be fixed firmly on a 150mm high concrete pedestal with bolt and nuts, finished neatly with plastering etc., complete. The board shall be applied with one coat of primer after cleaning and degreasing the metallic surfaces and finished neatly with powder coated paint of approved colour.
Incoming and Outgoing Feeders
a) 125A, 4 pole, moulded case circuit breaker, 25KA, TM based, RHOM with additional 2 nos and 2 NC auxillary contacts. (DG incomer) (1 No.)
b) 63A, TPN 10 KA, Miniature Circuit Breaker. (5 Nos.)
c) 40A, TPN 10 KA, Miniature Circuit Breaker.(1 No.)
d) Digital direct KWH meter (Elmeasure / Secure or equivalent) (6 Nos.)
1
-
-
Supply, loading, transportation and unloading of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (Make: Polycab/KEI/RR)
a) 240 Sqmm, 3.5 Core, (30 GI Strips - 4 x 0.8 mm)
150
-
-
b) 185 Sqmm, 3.5 Core, (28 GI Strips - 4 x 0.8 mm)
450
-
-
c) 35 Sqmm, 3.5 Core, (14 GI Strips - 4 x 0.8 mm)
100
-
-
d) 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)
1100
-
-
e) 10 Sqmm, 4 Core, (10 GI Strips - 4 x 0.8 mm)
800
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3.5c x 240 sqmm (62mm)
10
-
-
b) 3.5c x 185 sqmm (57mm)
4
-
-
c) 3.5c x 35 sqmm (32mm)
2
-
-
d) 4c x 16 sqmm (28mm)
20
-
-
e) 4c x 10 sqmm (25mm)
14
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size on cable tray as required. Upto 35Sq mm (Clampped with 1mm thick saddle)
2000
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size in the existing RCC/HUME/METAL pipe as required. Above 185Sq mm and upto 400Sq mm
600
-
-
Supplying and installing following size of perforated hot dipped galvanised iron cable tray (Galvanisation thickness not less than 50microns) with perforation not more than 17.5%, in convinient sections, joined with connectors, suspended from the ceiling with GI suspendors including GI bolts & nuts as required.
a) 300mm width x 50 mm depth x 1.6 mm thickness
50
-
-
b) 150mm width x 50 mm depth x 1.6 mm thickness
250
-
-
Load testing of DG set with consumables and approvals etc,., at supplier work shop for 4 hours & site for 1 Hour on Load.
1
-
-
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading,caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m
34.1
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
7.16
-
-
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates
2.71
-
-
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.
24.78
-
-
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.
13.76
-
-
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
25.8
-
-
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)
900
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements