Indian Institute Of Science Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Indian Institute Of Science - IISC Tender
Furnitures and Fixtures
Eprocure
Opening Date12 Jun 2024
Closing Date3 Jul 2024
Tender Amount₹ 4,00,00,000
Costs
EMD
₹ 8,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Supply Installation Testing And Commissioning Of Laboratory Furniture
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_IISC_811337_1Bid Award Id
ViewTender No
IISc/Tender-IDS-BE-11/2023-24Tender Authority
Indian Institute Of Science ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2. Control Valve for Potable Water - 1no.
3
-
-
3. Control Valve for Spare - 1no
3
-
-
4. Control Valve for Vacuum - 1no
3
-
-
Non-flame proof light fixture along with LED with 3 color setting control switch. Fumehood DB and Internal wiring within the hood, Fumehood internal electrical system: Design, Providing, supply, Installation, testing and commissioning of fume hood internal electrical supply system, consisting of - 6/16A sockets 3+3 nos for Raw power & 1+1 nos for UPS power, with 16A Tiny Trip MCB for each power socket;
24
-
-
Single Phase 20A DP RCBO Isolator for incomer
3
-
-
Emergency Stop Switch - 1 no's
3
-
-
Auto Sash having motion sensor to stop if object placed at sash movement. A combination sash to be provided. The sash shall have horizontal sliding glass panels in a vertical rising steel frame. The sash shall be counterbalanced with a single weight to prevent tilting and binding during operation. The glass panels shall be 6mm laminated safety toughened glass mounted on metal rollers in an powder coated aluminium track.
3
-
-
FRLS wiring with 4 sqmm wires for power sockets; with Two rapid start, approved LED light fixtures on Fume Hood internal ceiling. Illumination at work surface should be at least 50 Lux. Light switches on Fume hood Fasica, 32 amp DP MCB for Raw power main incomer & 20 amps DP MCB for UPS incomer, wiring should be done by using proper raceway/conduit. Socket should be provided with proper earthing with 4 sqmm FRLS wire. Rate is inclusive of cost of all materials, mode of measurement shall be each fume hood. ( Note the control box of fume hood should be placed in the front panel of fume hood for easy maintenance. Proto type sample to be got approved from the University before mass production).
3
-
-
Internal piping SS 304 for all the Services layed above 150mm Fume Hood Top Level.
18
-
-
PP cup sink with anti siphon bottle trap along with waste pipe -1 set
3
-
-
Fume Hood HDPE drain pipe shall be connected to nearest floor trap. Fumehood top including making connections with control valves etc complete internal piping work.
Note: HDPE Popup is provided behind the sinks & Fumehoods by piping vendor. Fumehood vendor shall connect & seal the drain piping to the nearest points.
3
-
-
Service Port, Fh Round 80mm Wire Manager - 2 no's
6
-
-
Ceiling enclosure front & side panel above Hood Height with Access Door up to 3.0m Height
3
-
-
Base Unit (750 W X 550 D X 900 H) with Vent Holes. Providing and supply of 2 door Double Skin Solvent storage cabinets of 90 minutes fire rating, UL labelled and specifically designed for the storage of flammable and combustible liquids. Construction shall be based upon the requirements listed by UL, UFC, OSHA, and NFPA No. 30 – 1993. The cabinet shall be labelled: “FLAMMABLE – KEEP FIRE AWAY”. One number adjustable shelf and two numbers of PP tray, for both bottom and intermediate shelf.
3
-
-
Base Unit with (750 W X 550 D X 900 W) with Vent Holes. Providing and supply of 2 Door Fume hood Acid Storage Cabinet, having a one-piece liner insert made of linear low-density polyethylene. The liner insert shall form a 25mm high pan at the bottom to retain spillage. Each door will have a set of louvers at the top and bottom. The door shall be lined with a polyethylene sheet. Each cabinet shall be vented into the fume hood with a 38mm dia. Vent pipe providing a positive airflow directly into the fume hood exhaust system. One number adjustable shelf and two numbers of PP tray, for both bottom and intermediate shelf.
3
-
-
Providing Fume Hood Digital Air Flow Monitor
3
-
-
2KG ABC Ceiling Mounted Fire Extinguisher Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure Gauge, Discharge Time less than 8 Secs, Auto discharge mechanism on temperature rise, applicable on Class A,B,C and electrically Fire. MOC-MS with powder coating - 02 Nos per hood
6
-
-
12" dia PVC Coated Collapsible Hose with Steel Helix & 14" Clips for Fume Hoods 0.5 mtrs
3
-
-
Static Earthing
3
-
-
Temperature contoller - 2 no's
6
-
-
Fume Hood-Buzzer
3
-
-
Fume Hood-Power ON/OFF Switch
3
-
-
[LAB FURNITURE
Providing, Design & Supply, Testing, Commissioning of best quality factory made ready built modular CRCA epoxy powder coated to 60 to 80 microns thickness laboratory furniture with working height 750 mm to 900mm high as per enclosed drawings, all surfaces zinc phosphated/degreased and epoxy powder coated to 60 to 80 microns thickness to pass the required ASTM/ IS Codes, complete as per technical specifications given in the tender document. Rate shall be inclusive of cost of all materials and operations described in the item, drilling holes, necessary welding, required nuts and bolts for joining with the supporting members, rivets, pins including all part items complete as per approved shop drawings and directions of Client in charge. Laboratory furniture in general shall consists of Pedestal mounted and under bench , sink units, Laboratory bench designed for carrying a loading of 300 Kg/sqm, reagent shelves, wall rails, storage cabinents etc. consisting of the following: ] ISLAND BENCH - i28, i29, i30
GRANITE WORK TOP Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (Sqmtr)
30
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk]. Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
24
-
-
Base Molding (rmtr)
50
-
-
Filler Panel (sqmtrs)
22
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
12
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
12
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
18
-
-
ELECTRICAL & NETWORKING FIXTURES
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (rmtrs)
28
-
-
ELECTRICAL & NETWORKING FIXTURES
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB. The assembly shall be housed in existing raceway
36
-
-
ELECTRICAL & NETWORKING FIXTURES
Cutout provisions for Data & Networking with polycarbonate faceplate
6
-
-
Service enclosure for island bench(250x125x2800)mm
6
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
18
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
6
-
-
ISLAND BENCH - i31
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment.(sqmtr)
10
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk.] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
6
-
-
Base Molding rmtr
16
-
-
Filler Panel (sqmtrs)
7
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
4
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
250x55mm size Metal Race way with cable divider for power line & data line seperation for Island Table (rmtrs)
8
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
10
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
SINK
[Providing and supply of black colour, acid and corrosion resistant PP sink with integral 50mm pipe threaded drain outlet as a one piece unit. Sink shall be injection moulded from pure polyolefins/ co-polymer material with inside corners coved, undercounter mounted. Sink shall be provided with the following accessories in PP- 3 way wall/ deck mounted water tap with swivelling gooseneck spout ( as per detailed drawing and specifications), anti siphon bottle trap, reducing coupler as per the outlet dia, PP pipe lengths as required to connect to drain pipe at floor. Work includes making connections in CPVC, checking connections at pressure of 4kg for 24 hours and making water tight joints. Water inlet shall be minimum 25mm dia and drain shall be minimum 50mm dia. Price to include providing and supply of Pegboard ( drying rack) of size 300 x 300, made from I mm thick SS 304 sheet with 33 nos. projected polypropylene pins, adjustable with minimum spacing of 10mm between pegs, suitable to hold different sizes of glassware. A drip channel with drain tube shall be provided at the bottom for draining out water with a flexible pipe conncetion to the nearest drain point. Pegboards shall be fixed on wall or furniture at accessible height.] PP sink, Internal size: 550Lx450Dx400Hmm
1
-
-
SS 304 Brust steel finish 750 x 750 mm peg board with 33 pegs & SS drain tray
1
-
-
Three way Goose neck Facuet
1
-
-
Anti siphon bottle trap.
1
-
-
Deck mounted double head eye wash/drench
1
-
-
Reducing coupler in PP 51 X 31MM + PP Pipe lengths - one feet length - DIA. 38MM
1
-
-
Base unit sink 2 door of size (1800Lx700Dx900Ht)
1
-
-
Base Unit Waste Storage With Chute & Bin Inside Pull Drawer -900hx550dx450l.,Full Overlay And Square Edge Steel,Lable Holder
1
-
-
PP cup sink with anti siphon bottle trap along with waste pipe
1
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
5
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
ISLAND BENCH - i24
GRANITE WORK TOP Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (sqmtr)
10
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
8
-
-
Base Molding rmtr
15
-
-
Filler Panel (sqmtrs)
7
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
6
-
-
ELECTRICAL & NETWORKING FIXTURES
250x55mm size Metal Race way with cable divider for power line & data line seperation for Island Table (rmtrs)
9
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
12
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
6
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
ISLAND BENCH - i25
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. sqmtrs
11
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk.] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
8
-
-
Base Molding rmtr
15
-
-
Filler Panel (sqmtrs)
7
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
6
-
-
ELECTRICAL & NETWORKING FIXTURES
250x55mm size Metal Race way with cable divider for power line & data line seperation for Island Table
9
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
12
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
SINK
[Providing and supply of black colour, acid and corrosion resistant PP sink with integral 50mm pipe threaded drain outlet as a one piece unit. Sink shall be injection moulded from pure polyolefins/ co-polymer material with inside corners coved, undercounter mounted. Sink shall be provided with the following accessories in PP- 3 way wall/ deck mounted water tap with swivelling gooseneck spout ( as per detailed drawing and specifications), anti siphon bottle trap, reducing coupler as per the outlet dia, PP pipe lengths as required to connect to drain pipe at floor. Work includes making connections in CPVC, checking connections at pressure of 4kg for 24 hours and making water tight joints. Water inlet shall be minimum 25mm dia and drain shall be minimum 50mm dia. Price to include providing and supply of Pegboard ( drying rack) of size 300 x 300, made from I mm thick SS 304 sheet with 33 nos. projected polypropylene pins, adjustable with minimum spacing of 10mm between pegs, suitable to hold different sizes of glassware. A drip channel with drain tube shall be provided at the bottom for draining out water with a flexible pipe conncetion to the nearest drain point. Pegboards shall be fixed on wall or furniture at accessible height]. PP sink, Internal size: 550Lx450Dx400Hmm
1
-
-
SS 304 Brust steel finish 750 x 750 mm peg board with 33 pegs & SS drain tray
1
-
-
Three way Goose neck Facuet
1
-
-
Anti siphon bottle trap.
1
-
-
Deck mounted double head eye wash/drench
1
-
-
Reducing coupler in PP 51 X 31MM + PP Pipe lengths - one feet length - DIA. 38MM
1
-
-
Base unit sink 2 door of size (1800Lx700Dx900Ht)
1
-
-
Base Unit Waste Storage With Chute & Bin Inside Pull Drawer -900hx550dx450l.,Full Overlay And Square Edge Steel,Lable Holder
1
-
-
PP cup sink with anti siphon bottle trap along with waste pipe
1
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
6
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
ELECTRICAL & NETWORKING FIXTURES
250x55mm size Metal Race way with cable divider for power line & data line seperation for Island Table
9
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
12
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
SINK
[Providing and supply of black colour, acid and corrosion resistant PP sink with integral 50mm pipe threaded drain outlet as a one piece unit. Sink shall be injection moulded from pure polyolefins/ co-polymer material with inside corners coved, undercounter mounted. Sink shall be provided with the following accessories in PP- 3 way wall/ deck mounted water tap with swivelling gooseneck spout ( as per detailed drawing and specifications), anti siphon bottle trap, reducing coupler as per the outlet dia, PP pipe lengths as required to connect to drain pipe at floor. Work includes making connections in CPVC, checking connections at pressure of 4kg for 24 hours and making water tight joints. Water inlet shall be minimum 25mm dia and drain shall be minimum 50mm dia. Price to include providing and supply of Pegboard ( drying rack) of size 300 x 300, made from I mm thick SS 304 sheet with 33 nos. projected polypropylene pins, adjustable with minimum spacing of 10mm between pegs, suitable to hold different sizes of glassware. A drip channel with drain tube shall be provided at the bottom for draining out water with a flexible pipe conncetion to the nearest drain point. Pegboards shall be fixed on wall or furniture at accessible height.] PP sink, Internal size: 550Lx450Dx400Hmm
1
-
-
SS 304 Brust steel finish 750 x 750 mm peg board with 33 pegs & SS drain tray
1
-
-
Three way Goose neck Facuet
1
-
-
Anti siphon bottle trap.
1
-
-
Deck mounted double head eye wash/drench
1
-
-
Reducing coupler in PP 51 X 31MM + PP Pipe lengths - one feet length - DIA. 38MM
1
-
-
Base unit sink 2 door of size (1800Lx700Dx900Ht)
1
-
-
Base Unit Waste Storage With Chute & Bin Inside Pull Drawer -900hx550dx450l.,Full Overlay And Square Edge Steel,Lable Holder
1
-
-
PP cup sink with anti siphon bottle trap along with waste pipe
1
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
6
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
ISLAND BENCH - i26
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (Sqmtr)
11
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
10
-
-
Base Molding (rmtr)
16
-
-
Filler Panel (sqmtrs)
7
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
6
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
Ceiling Bracket for Spot Extractor 100 x 100 x 2300mm
1
-
-
Ceiling Mounted Spot Extractor with 300mm dia Hood & 10" dia PVC Coated Collapsible Hose with Steel Helix.
1
-
-
ELECTRICAL & NETWORKING FIXTURES
250x55mm size Metal Race way with cable divider for power line & data line seperation for Island Table (rmtrs)
10
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
12
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
5
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
ISLAND BENCH - i27
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (sqmtr)
11
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
10
-
-
Base Molding (rmtr)
16
-
-
Filler Panel (sqmtrs)
7
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
6
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
250x55mm size Metal Race way with cable divider for power line & data line seperation for Island Table (rmtrs)
10
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
12
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
5
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
ISLAND BENCH - i20
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (Sqmtr)
16
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
10
-
-
Base Molding rmtr
23
-
-
Filler Panel (sqmtrs)
12
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
6
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
6
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
10
-
-
ELECTRICAL & NETWORKING FIXTURES
250x55mm size Metal Race way with cable divider for power line & data line seperation for Island Table (rmtrs)
15
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
14
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
10
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
ISLAND BENCH - i21
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (Sqmtr)
15
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
14
-
-
Base Molding rmtr
25
-
-
Filler Panel (sqmtrs)
10
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
6
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
6
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
10
-
-
Ceiling Bracket for Spot Extractor 100 x 100 x 2300mm
1
-
-
Ceiling Mounted Spot Extractor with 300mm dia Hood & 10" dia PVC Coated Collapsible Hose with Steel Helix.
1
-
-
ELECTRICAL & NETWORKING FIXTURES
250x55mm size Metal Race way with cable divider for power line & data line seperation for Island Table (rmtrs)
15
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
14
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
10
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
ISLAND BENCH - i22
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (Sqmtr)
16
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
12
-
-
Base Molding rmtr
25
-
-
Filler Panel (sqmtrs)
12
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
6
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
6
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
10
-
-
ELECTRICAL & NETWORKING FIXTURES
250x55mm size Metal Race way with cable divider for power line & data line seperation for Island Table (rmtrs)
15
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
14
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
10
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
ISLAND BENCH - i23
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (Sqmtr)
16
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
12
-
-
Base Molding rmtr
22
-
-
Filler Panel (sqmtrs)
11
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
6
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
6
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
8
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
250x55mm size Metal Race way with cable divider for power line & data line seperation for Island Table (rmtrs)
14
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
14
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
SINK
[Providing and supply of black colour, acid and corrosion resistant PP sink with integral 50mm pipe threaded drain outlet as a one piece unit. Sink shall be injection moulded from pure polyolefins/ co-polymer material with inside corners coved, undercounter mounted. Sink shall be provided with the following accessories in PP- 3 way wall/ deck mounted water tap with swivelling gooseneck spout ( as per detailed drawing and specifications), anti siphon bottle trap, reducing coupler as per the outlet dia, PP pipe lengths as required to connect to drain pipe at floor. Work includes making connections in CPVC, checking connections at pressure of 4kg for 24 hours and making water tight joints. Water inlet shall be minimum 25mm dia and drain shall be minimum 50mm dia. Price to include providing and supply of Pegboard ( drying rack) of size 300 x 300, made from I mm thick SS 304 sheet with 33 nos. projected polypropylene pins, adjustable with minimum spacing of 10mm between pegs, suitable to hold different sizes of glassware. A drip channel with drain tube shall be provided at the bottom for draining out water with a flexible pipe conncetion to the nearest drain point. Pegboards shall be fixed on wall or furniture at accessible height.] PP sink, Internal size: 550Lx450Dx400Hmm
1
-
-
SS 304 Brust steel finish 750 x 750 mm peg board with 33 pegs & SS drain tray
1
-
-
Three way Goose neck Facuet
1
-
-
Anti siphon bottle trap.
1
-
-
Deck mounted double head eye wash/drench
1
-
-
Reducing coupler in PP 51 X 31MM + PP Pipe lengths - one feet length - DIA. 38MM
1
-
-
Base unit sink 2 door of size (1800Lx700Dx900Ht)
1
-
-
Base Unit Waste Storage With Chute & Bin Inside Pull Drawer -900hx550dx450l.,Full Overlay And Square Edge Steel,Lable Holder
1
-
-
PP cup sink with anti siphon bottle trap along with waste pipe
1
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
9
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
ISLAND BENCH - i16, I18
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment.
22
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
18
-
-
Base Molding rmtr
32
-
-
Filler Panel (sqmtrs)
16
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
8
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
8
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
12
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
4
-
-
ELECTRICAL & NETWORKING FIXTURES
250x55mm size Metal Race way with cable divider for power line & data line seperation for Island Table (rmtrs)
20
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
22
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
4
-
-
Service enclosure for island bench(250x125x2800)mm
4
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
14
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
4
-
-
ISLAND BENCH - i17
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (sqmtr)
11
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
8
-
-
Base Molding rmtr
15
-
-
Filler Panel (sqmtrs)
7
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
6
-
-
ELECTRICAL & NETWORKING FIXTURES
250x55mm size Metal Race way with cable divider for power line & data line seperation for Island Table (rmtrs)
20
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
12
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
4
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
16
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
4
-
-
WALL BENCH - W21, W16
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (sqmtr)
6
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. (rmtr)
18
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 1 door 1 drawer of size (600WX550DX900H) with Lock & Key
2
-
-
Base Molding rmtr
5
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
3
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
2
-
-
SINK
[Providing and supply of black colour, acid and corrosion resistant PP sink with integral 50mm pipe threaded drain outlet as a one piece unit. Sink shall be injection moulded from pure polyolefins/ co-polymer material with inside corners coved, undercounter mounted. Sink shall be provided with the following accessories in PP- 3 way wall/ deck mounted water tap with swivelling gooseneck spout ( as per detailed drawing and specifications), anti siphon bottle trap, reducing coupler as per the outlet dia, PP pipe lengths as required to connect to drain pipe at floor. Work includes making connections in CPVC, checking connections at pressure of 4kg for 24 hours and making water tight joints. Water inlet shall be minimum 25mm dia and drain shall be minimum 50mm dia. Price to include providing and supply of Pegboard ( drying rack) of size 300 x 300, made from I mm thick SS 304 sheet with 33 nos. projected polypropylene pins, adjustable with minimum spacing of 10mm between pegs, suitable to hold different sizes of glassware. A drip channel with drain tube shall be provided at the bottom for draining out water with a flexible pipe conncetion to the nearest drain point. Pegboards shall be fixed on wall or furniture at accessible height.] PP sink, Internal size: 550Lx450Dx400Hmm
2
-
-
SS 304 Brust steel finish 750 x 750 mm peg board with 33 pegs & SS drain tray
2
-
-
Three way Goose neck Facuet
2
-
-
Anti siphon bottle trap.
2
-
-
Deck mounted double head eye wash/drench
2
-
-
Reducing coupler in PP 51 X 31MM + PP Pipe lengths - one feet length - DIA. 38MM
2
-
-
Base unit sink 2 door of size (750Lx550Dx900Ht)
2
-
-
Base Unit Waste Storage With Chute & Bin Inside Pull Drawer -900hx550dx450l.,Full Overlay And Square Edge Steel,Lable Holder
2
-
-
PP cup sink with anti siphon bottle trap along with waste pipe
2
-
-
Service enclosure for wall bench(250x125x2800)mm
2
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
4
-
-
WALL BENCH - W20, W17
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (sqmtr)
8
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. (rmtr)
22
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Filler Panel (sqmtrs)
16
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
6
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
10
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
4
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
7
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
5
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
1
-
-
Service enclosure for wall bench(250x125x2800)mm
2
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
4
-
-
WALL BENCH - W18
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (sqmtr)
8
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. (rmtr)
20
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
4
-
-
Base Molding rmtr
8
-
-
Filler Panel (sqmtrs)
4
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
2
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
2
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
6
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
5
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
6
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
1
-
-
Service enclosure for wall bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
WALL BENCH - W19
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (sqmtr)
7
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. (rmtr)
18
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
4
-
-
Base Molding rmtr
8
-
-
Filler Panel (sqmtrs)
3
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
2
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
2
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
3
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
5
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
6
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
1
-
-
Service enclosure for wall bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
AVT
Metal Anti Vibration Table with Granite Work Top at Center (900Lx750Dx900Ht)
5
-
-
SAFETY SHOWER
Providing and fixing of Floor mounted emergency safety showers with integrated eyewash including ABS plastic shower head, operated by a rigid pull rod and easy grip handle
2
-
-
SOLVENT STORAGE CABINETS
FM Approved storage cabinets: FM approved Self Close storages cabinets of 90 minutes Fire Rating Solvent FM Approved Self Close storages cabinets of corrosive chemicals and should be provided with a ventilation system to enable exhaust of localized fumes emanating from the chemicals stored or flammable liquids. Because of the corrosive environment the material used is 1.2 mm thick CRCA / GI sheet high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating, having scratch hardness of 3kg and passing 1000 hour salt spray test. It is fitted with a float glass to enable visibility inside the cabinet and has a tray placed at the bottom for collecting the spillage. The rate is inclusive of the cost of all the materials and involved as per drawing and detailed specifications. Dimnensions: 900mm(W) x 600 mm (D) x 2100 mm (H). 90 minutes Fire Rated FM approved Solvent Storage Cabinets with 4nos PP Tray Shelf, Tray Shelves with load capacity of 75 kgs & 1 nos Bottom PP Collection sump.
5
-
-
CHEMICAL CABINETS
Cabinet with outer skin material and inner material coated with chemical resistant material and epoxy or MS powder coated rack and self-closing doors, with five shelves of 500 mm depth. Dimensions: 1200mm (W) x 600 mm (D) x 2100 mm (H). The individual shelves should have holding capacity of 20 kgs.
15
-
-
OVERHEAD CABINETS
Over head cabinets - 750 mm x 400 mm, should hold weight of capacity 30 kg.
32
-
-
BSSE HISTOLOGY Bench Top Variable Air Volume Fume Hood with Base Cabinets. Design, Fabrication, Supply & Installation of EN 14175 / ASHRAE 110 2016 Certified, 1200L X 1200D X 2400 H *bench top Fume Hood, Auto Sash with sensors where the Sash of the Fume Hood Should be Horizontal & Vertical Up Side Down with 6mm thick Tempered Safety Glass, restricted by pass, inner wall lined with 6 mm Solid grade laminate made of composite wooden fibres with “Electron Beam Cured” surface which is free of melamine resins with resistance to bacteria and various chemical spillage as well as fumes. Fire rating certified by 3rd party for Fume hood application with minimum 60 minutes of fire rating, 30mm thick Granite Work Top of approved colour with 5 mm Raised edges, with following accessories. Double wall construction; outer wall of 1.2mm thk Epoxy powder coated CRCA. A free-standing rigid frame structure of steel angle to be provided to support exterior panels and interior liner and baffle panels. To allow for maintenance and replacements, the interior liner panels shall be removable without disassembly of the frame structure and outer steel panels. Likewise, the exterior steel panels shall be removable without disassembly of the frame structure and inner liner panels. A stable, baffle with three fixed horizontal slots shall be provided to aid in distributing the flow of air into and through the hood. The baffle shall be spaced out minimum 50mm from the back liner. The baffle shall be removable for cleaning. 300 mm diameter polyethylene bell-mouthed duct collar shall be located in the top of the hood plenum chamber. PP moulded exhaust blower with blower motor to be provided. 300 mm Single leaf butterfly manual damper with both side flanges and PP molded.
1
-
-
Solid Epoxy lattice assembly -1 no's
1
-
-
Media Panel of 200 mm ht along the width of Fume Hoods positioned on Bottom of Bench Top Fume Hoods. Following are the accessories are Housed in Media Panel. 1. Control Valve for N2 - 1no
1
-
-
2. Control Valve for Potable Water - 1no.
1
-
-
3. Control Valve for Spare - 1no
1
-
-
4. Control Valve for Vacuum - 1no
1
-
-
Non-flame proof light fixture along with LED with 3 color setting control switch. Fumehood DB and Internal wiring within the hood, Fumehood internal electrical system: Design, Providing, supply, Installation, testing and commissioning of fume hood internal electrical supply system, consisting of - 6/16A sockets 3+3 nos for Raw power & 1+1 nos for UPS power, with 16A Tiny Trip MCB for each power socket;
6
-
-
Single Phase 20A DP RCBO Isolator for incomer
1
-
-
Emergency Stop Switch - 1 no's
1
-
-
Auto Sash having motion sensor to stop if object placed at sash movement. A combination sash to be provided. The sash shall have horizontal sliding glass panels in a vertical rising steel frame. The sash shall be counterbalanced with a single weight to prevent tilting and binding during operation. The glass panels shall be 6mm laminated safety toughened glass mounted on metal rollers in an powder coated aluminium track.
1
-
-
FRLS wiring with 4 sqmm wires for power sockets; with Two rapid start, approved LED light fixtures on Fume Hood internal ceiling. Illumination at work surface should be at least 50 Lux. Light switches on Fume hood Fasica, 32 amp DP MCB for Raw power main incomer & 20 amps DP MCB for UPS incomer, wiring should be done by using proper raceway/conduit. Socket should be provided with proper earthing with 4 sqmm FRLS wire. Rate is inclusive of cost of all materials, mode of measurement shall be each fume hood. ( Note the control box of fume hood should be placed in the front panel of fume hood for easy maintenance. Proto type sample to be got approved from the University before mass production).
1
-
-
Internal piping SS 304 for all the Services layed above 150mm Fume Hood Top Level.
6
-
-
PP cup sink with anti siphon bottle trap along with waste pipe -1 set
1
-
-
Fume Hood HDPE drain pipe shall be connected to nearest floor trap. Fumehood top including making connections with control valves etc complete internal piping work.
Note: HDPE Popup is provided behind the sinks & Fumehoods by piping vendor. Fumehood vendor shall connect & seal the drain piping to the nearest points.
1
-
-
Service Port, Fh Round 80mm Wire Manager - 2 no's
2
-
-
Ceiling enclosure front & side panel above Hood Height with Access Door up to 3.0m Height
1
-
-
Base Unit with 1 Door (900 W X 550 D X 900 H) with Vent Holes. Providing and supply of 2 door Double Skin Solvent storage cabinets, UL labelled and specifically designed for the storage of flammable and combustible liquids. Construction shall be based upon the requirements listed by UL, UFC, OSHA, and NFPA No. 30 – 1993. The cabinet shall be labelled: “FLAMMABLE – KEEP FIRE AWAY”. one number adjustable shelf and 2 numbers of PP tray, for both bottom and intermediate shelf.
1
-
-
Base Unit with 1 Door (900 W X 550 D X 900 W) with Vent Holes. Providing and supply of 2 Door Fume hood Acid Storage Cabinet having a one-piece liner insert made of linear low-density polyethylene. The liner insert shall form a 25mm high pan at the bottom to retain spillage. Each door will have a set of louvers at the top and bottom. The door shall be lined with a polyethylene sheet. Each cabinet shall be vented into the fume hood with a 38mm dia. Vent pipe providing a positive airflow directly into the fume hood exhaust system. one number adjustable shelf and 2 numbers of PP tray, for both bottom and intermediate shelf.
1
-
-
Providing Fume Hood Digital Air Flow Monitor
1
-
-
2KG ABC Ceiling Mounted Fire Extinguisher Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure Gauge, Discharge Time less than 8 Secs, Auto discharge mechanism on temperature rise, applicable on Class A,B,C and electrically Fire. MOC-MS with powder coating - 02 Nos per hood
2
-
-
12" dia PVC Coated Collapsible Hose with Steel Helix & 14" Clips for Fume Hoods 0.5 mtrs
1
-
-
Static Earthing
1
-
-
Temperature contoller - 2 no's
2
-
-
Fume Hood-Buzzer
1
-
-
Fume Hood-Power ON/OFF Switch
1
-
-
BSSE HISTOLOGY LAB FURNITURE
[ Providing, Design & Supply, Testing, Commissioning of best quality factory made ready built modular CRCA epoxy powder coated to 60 to 80 microns thickness laboratory furniture with working height 750 mm to 900mm high as per enclosed drawings, all surfaces zinc phosphated/degreased and epoxy powder coated to 60 to 80 microns thickness to pass the required ASTM/ IS Codes, complete as per technical specifications given in the tender document. Rate shall be inclusive of cost of all materials and operations described in the item, drilling holes, necessary welding, required nuts and bolts for joining with the supporting members, rivets, pins including all part items complete as per approved shop drawings and directions of Client in charge. Laboratory furniture in general shall consists of Pedestal mounted and under bench , sink units, Laboratory bench designed for carrying a loading of 300 Kg/sqm, reagent shelves, wall rails, storage cabinents etc. consisting of the following: ] ISLAND BENCH - i19
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (Sqmtr)
7
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
6
-
-
Base Molding rmtr
11
-
-
Filler Panel (sqmtrs)
3
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
2
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
2
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
3
-
-
ELECTRICAL & NETWORKING FIXTURES
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (Rmtrs)
6
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
8
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
SINK
[Providing and supply of black colour, acid and corrosion resistant PP sink with integral 50mm pipe threaded drain outlet as a one piece unit. Sink shall be injection moulded from pure polyolefins/ co-polymer material with inside corners coved, undercounter mounted. Sink shall be provided with the following accessories in PP- 3 way wall/ deck mounted water tap with swivelling gooseneck spout ( as per detailed drawing and specifications), anti siphon bottle trap, reducing coupler as per the outlet dia, PP pipe lengths as required to connect to drain pipe at floor. Work includes making connections in CPVC, checking connections at pressure of 4kg for 24 hours and making water tight joints. Water inlet shall be minimum 25mm dia and drain shall be minimum 50mm dia. Price to include providing and supply of Pegboard ( drying rack) of size 300 x 300, made from I mm thick SS 304 sheet with 33 nos. projected polypropylene pins, adjustable with minimum spacing of 10mm between pegs, suitable to hold different sizes of glassware. A drip channel with drain tube shall be provided at the bottom for draining out water with a flexible pipe conncetion to the nearest drain point. Pegboards shall be fixed on wall or furniture at accessible height.] PP sink, Internal size: 550Lx450Dx400Hmm
1
-
-
SS 304 Brust steel finish 750 x 750 mm peg board with 33 pegs & SS drain tray
1
-
-
Three way Goose neck Facuet
1
-
-
Anti siphon bottle trap.
1
-
-
Deck mounted double head eye wash/drench
1
-
-
Reducing coupler in PP 51 X 31MM + PP Pipe lengths - one feet length - DIA. 38MM
1
-
-
Base unit sink 2 door of size (1500Lx700Dx900Ht)
1
-
-
Base Unit Waste Storage With Chute & Bin Inside Pull Drawer -900hx550dx450l.,Full Overlay And Square Edge Steel,Lable Holder
1
-
-
PP cup sink with anti siphon bottle trap along with waste pipe
1
-
-
Service enclosure for island bench(250x125x2800)mm
1
-
-
Reagent Rack 1500W 150D 885H With 2 Nos Outer Shelves
4
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
LAB FURNITURE - BSSE WET LAB - 02
Bench Top Variable Air Volume Fume Hood with Base Cabinets. Design, Fabrication, Supply & Installation of EN 14175 / ASHRAE 110 2016 Certified, 1500L X 1200D X 2400 H *bench top Fume Hood, Auto Sash with sensors where the Sash of the Fume Hood Should be Horizontal & Vertical Up Side Down with 6mm thick Tempered Safety Glass, restricted by pass, inner wall lined with 6 mm Solid grade laminate made of composite wooden fibres with “Electron Beam Cured” surface which is free of melamine resins with resistance to bacteria and various chemical spillage as well as fumes. Fire rating certified by 3rd party for Fume hood application with minimum 60 minutes of fire rating, 30mm thick Granite Work Top of approved colour with 5 mm Raised edges, with following accessories. Double wall construction; outer wall of 1.2mm thk Epoxy powder coated CRCA. A free-standing rigid frame structure of steel angle to be provided to support exterior panels and interior liner and baffle panels. To allow for maintenance and replacements, the interior liner panels shall be removable without disassembly of the frame structure and outer steel panels. Likewise, the exterior steel panels shall be removable without disassembly of the frame structure and inner liner panels. A stable, baffle with three fixed horizontal slots shall be provided to aid in distributing the flow of air into and through the hood. The baffle shall be spaced out minimum 50mm from the back liner. The baffle shall be removable for cleaning. 300 mm diameter polyethylene bell-mouthed duct collar shall be located in the top of the hood plenum chamber. PP moulded exhaust blower with blower motor to be provided. 300 mm Single leaf butterfly manual damper with both side flanges and PP molded.
3
-
-
Solid Epoxy lattice assembly -1 no's
3
-
-
Media Panel of 200 mm ht along the width of Fume Hoods positioned on Bottom of Bench Top Fume Hoods. Following are the accessories are Housed in Media Panel. 1. Control Valve for N2 - 1no
3
-
-
2. Control Valve for Potable Water - 1no.
3
-
-
3. Control Valve for Spare - 1no
3
-
-
4. Control Valve for Vacuum - 1no
3
-
-
Non-flame proof light fixture along with LED with 3 color setting control switch. Fumehood DB and Internal wiring within the hood, Fumehood internal electrical system: Design, Providing, supply, Installation, testing and commissioning of fume hood internal electrical supply system, consisting of - 6/16A sockets 3+3 nos for Raw power & 1+1 nos for UPS power, with 16A Tiny Trip MCB for each power socket;
18
-
-
Single Phase 20A DP RCBO Isolator for incomer
3
-
-
Emergency Stop Switch - 1 no's
3
-
-
Auto Sash having motion sensor to stop if object placed at sash movement. A combination sash to be provided. The sash shall have horizontal sliding glass panels in a vertical rising steel frame. The sash shall be counterbalanced with a single weight to prevent tilting and binding during operation. The glass panels shall be 6mm laminated safety toughened glass mounted on metal rollers in an powder coated aluminium track.
3
-
-
FRLS wiring with 4 sqmm wires for power sockets; with Two rapid start, approved LED light fixtures on Fume Hood internal ceiling. Illumination at work surface should be at least 50 Lux. Light switches on Fume hood Fasica, 32 amp DP MCB for Raw power main incomer & 20 amps DP MCB for UPS incomer, wiring should be done by using proper raceway/conduit. Socket should be provided with proper earthing with 4 sqmm FRLS wire. Rate is inclusive of cost of all materials, mode of measurement shall be each fume hood. ( Note the control box of fume hood should be placed in the front panel of fume hood for easy maintenance. Proto type sample to be got approved from the University before mass production).
3
-
-
Internal piping SS 304 for all the Services layed above 150mm Fume Hood Top Level. (rmtr)
18
-
-
PP cup sink with anti siphon bottle trap along with waste pipe -1 set
3
-
-
Fume Hood HDPE drain pipe shall be connected to nearest floor trap. Fumehood top including making connections with control valves etc complete internal piping work.
Note: HDPE Popup is provided behind the sinks & Fumehoods by piping vendor. Fumehood vendor shall connect & seal the drain piping to the nearest points.
3
-
-
Service Port, Fh Round 80mm Wire Manager - 2 no's
6
-
-
Ceiling enclosure front & side panel above Hood Height with Access Door up to 3.0m Height
3
-
-
Base Unit with 1 Door (900 W X 550 D X 900 H) with Vent Holes. Providing and supply of 2 door Double Skin Solvent storage cabinets, UL labelled and specifically designed for the storage of flammable and combustible liquids. Construction shall be based upon the requirements listed by UL, UFC, OSHA, and NFPA No. 30 – 1993. The cabinet shall be labelled: “FLAMMABLE – KEEP FIRE AWAY”. one number adjustable shelf and 2 numbers of PP tray, for both bottom and intermediate shelf.
3
-
-
Base Unit with 1 Door (900 W X 550 D X 900 W) with Vent Holes. Providing and supply of 2 Door Fume hood Acid Storage Cabinet having a one-piece liner insert made of linear low-density polyethylene. The liner insert shall form a 25mm high pan at the bottom to retain spillage. Each door will have a set of louvers at the top and bottom. The door shall be lined with a polyethylene sheet. Each cabinet shall be vented into the fume hood with a 38mm dia. Vent pipe providing a positive airflow directly into the fume hood exhaust system. one number adjustable shelf and 2 numbers of PP tray, for both bottom and intermediate shelf.
3
-
-
Providing Fume Hood Digital Air Flow Monitor
3
-
-
2KG ABC Ceiling Mounted Fire Extinguisher Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure Gauge, Discharge Time less than 8 Secs, Auto discharge mechanism on temperature rise, applicable on Class A,B,C and electrically Fire. MOC-MS with powder coating - 02 Nos per hood
6
-
-
12" dia PVC Coated Collapsible Hose with Steel Helix & 14" Clips for Fume Hoods 0.5 mtrs
3
-
-
Static Earthing
3
-
-
Temperature contoller - 2 no's
6
-
-
Fume Hood-Buzzer
3
-
-
Fume Hood-Power ON/OFF Switch
3
-
-
LAB FURNITURE
[Providing, Design & Supply, Testing, Commissioning of best quality factory made ready built modular CRCA epoxy powder coated to 60 to 80 microns thickness laboratory furniture with working height 750 mm to 900mm high as per enclosed drawings, all surfaces zinc phosphated/degreased and epoxy powder coated to 60 to 80 microns thickness to pass the required ASTM/ IS Codes, complete as per technical specifications given in the tender document. Rate shall be inclusive of cost of all materials and operations described in the item, drilling holes, necessary welding, required nuts and bolts for joining with the supporting members, rivets, pins including all part items complete as per approved shop drawings and directions of Client in charge. Laboratory furniture in general shall consists of Pedestal mounted and under bench , sink units, Laboratory bench designed for carrying a loading of 300 Kg/sqm, reagent shelves, wall rails, storage cabinents etc. consisting of the following: ] ISLAND BENCH - i32, i33
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (Sqmtr)
13
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
16
-
-
Base Molding rmtr
26
-
-
Filler Panel (sqmtrs)
7
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
8
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
4
-
-
ELECTRICAL & NETWORKING FIXTURES
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (Rmtrs)
15
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
20
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
4
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
4
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
10
-
-
ISLAND BENCH - i34
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (sqmtr)
11
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
10
-
-
Base Molding rmtr
18
-
-
Filler Panel (sqmtrs)
7
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
6
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
Ceiling Bracket for Spot Extractor 100 x 100 x 2300mm
1
-
-
Ceiling Mounted Spot Extractor with 300mm dia Hood & 10" dia PVC Coated Collapsible Hose with Steel Helix.
1
-
-
ELECTRICAL & NETWORKING FIXTURES
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (Rmtrs)
10
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
12
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
1
-
-
SINK
Providing and supply of black colour, acid and corrosion resistant PP sink with integral 50mm pipe threaded drain outlet as a one piece unit. Sink shall be injection moulded from pure polyolefins/ co-polymer material with inside corners coved, undercounter mounted. Sink shall be provided with the following accessories in PP- 3 way wall/ deck mounted water tap with swivelling gooseneck spout ( as per detailed drawing and specifications), anti siphon bottle trap, reducing coupler as per the outlet dia, PP pipe lengths as required to connect to drain pipe at floor. Work includes making connections in CPVC, checking connections at pressure of 4kg for 24 hours and making water tight joints. Water inlet shall be minimum 25mm dia and drain shall be minimum 50mm dia. Price to include providing and supply of Pegboard ( drying rack) of size 300 x 300, made from I mm thick SS 304 sheet with 33 nos. projected polypropylene pins, adjustable with minimum spacing of 10mm between pegs, suitable to hold different sizes of glassware. A drip channel with drain tube shall be provided at the bottom for draining out water with a flexible pipe conncetion to the nearest drain point. Pegboards shall be fixed on wall or furniture at accessible height. PP sink, Internal size: 550Lx450Dx400Hmm
1
-
-
SS 304 Brust steel finish 750 x 750 mm peg board with 33 pegs & SS drain tray
1
-
-
Three way Goose neck Facuet
1
-
-
Anti siphon bottle trap.
1
-
-
Deck mounted double head eye wash/drench
1
-
-
Reducing coupler in PP 51 X 31MM + PP Pipe lengths - one feet length - DIA. 38MM
1
-
-
Base unit sink 2 door of size (1500Lx700Dx900Ht)
1
-
-
Base Unit Waste Storage With Chute & Bin Inside Pull Drawer -900hx550dx450l.,Full Overlay And Square Edge Steel,Lable Holder
1
-
-
PP cup sink with anti siphon bottle trap along with waste pipe
1
-
-
Under Bench 10L Waste Solvent collection Cannister with level indication Provision
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
7
-
-
ISLAND BENCH - i35
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
11
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
10
-
-
Base Molding rmtr
20
-
-
Filler Panel (sqmtrs)
7
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
8
-
-
ELECTRICAL & NETWORKING FIXTURES
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (Rmtrs)
12
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
11
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
8
-
-
ISLAND BENCH - i5
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. (sqmtr)
13
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
12
-
-
Base Molding rmtr
20
-
-
Filler Panel (sqmtrs)
10
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
6
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
6
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
8
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (Rmtrs)
13
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
14
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
SINK
[Providing and supply of black colour, acid and corrosion resistant PP sink with integral 50mm pipe threaded drain outlet as a one piece unit. Sink shall be injection moulded from pure polyolefins/ co-polymer material with inside corners coved, undercounter mounted. Sink shall be provided with the following accessories in PP- 3 way wall/ deck mounted water tap with swivelling gooseneck spout ( as per detailed drawing and specifications), anti siphon bottle trap, reducing coupler as per the outlet dia, PP pipe lengths as required to connect to drain pipe at floor. Work includes making connections in CPVC, checking connections at pressure of 4kg for 24 hours and making water tight joints. Water inlet shall be minimum 25mm dia and drain shall be minimum 50mm dia. Price to include providing and supply of Pegboard ( drying rack) of size 300 x 300, made from I mm thick SS 304 sheet with 33 nos. projected polypropylene pins, adjustable with minimum spacing of 10mm between pegs, suitable to hold different sizes of glassware. A drip channel with drain tube shall be provided at the bottom for draining out water with a flexible pipe conncetion to the nearest drain point. Pegboards shall be fixed on wall or furniture at accessible height.] PP sink, Internal size: 550Lx450Dx400Hmm
1
-
-
SS 304 Brust steel finish 750 x 750 mm peg board with 33 pegs & SS drain tray
1
-
-
Three way Goose neck Facuet
1
-
-
Anti siphon bottle trap.
1
-
-
Deck mounted double head eye wash/drench
1
-
-
Reducing coupler in PP 51 X 31MM + PP Pipe lengths - one feet length - DIA. 38MM
1
-
-
Base unit sink 2 door of size (1500Lx700Dx900Ht)
1
-
-
Base Unit Waste Storage With Chute & Bin Inside Pull Drawer -900hx550dx450l.,Full Overlay And Square Edge Steel,Lable Holder
1
-
-
PP cup sink with anti siphon bottle trap along with waste pipe
1
-
-
Under Bench 10L Waste Solvent collection Cannister with level indication Provision
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
9
-
-
ISLAND BENCH - i6, i8
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
25
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
24
-
-
Base Molding rmtr
48
-
-
Filler Panel (sqmtrs)
23
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
12
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
12
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
20
-
-
ELECTRICAL & NETWORKING FIXTURES
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (Rmtrs)
30
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
28
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
4
-
-
Service enclosure for island bench(250x125x2800)mm
4
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
4
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
20
-
-
ISLAND BENCH - i7
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
13
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
14
-
-
Base Molding
25
-
-
Filler Panel
10
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
6
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
6
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
10
-
-
Ceiling Bracket for Spot Extractor 100 x 100 x 2300mm
1
-
-
Ceiling Mounted Spot Extractor with 300mm dia Hood & 10" dia PVC Coated Collapsible Hose with Steel Helix.
1
-
-
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table
15
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
14
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
10
-
-
ISLAND BENCH - i1
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
9
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
10
-
-
Base Molding rmtr
18
-
-
Filler Panel (sqmtrs)
7
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
6
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (Rmtrs)
10
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
12
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
7
-
-
ISLAND BENCH - i3
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. sqmtr
9
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
8
-
-
Base Molding rmtr
14
-
-
Filler Panel (sqmtrs)
7
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
6
-
-
ELECTRICAL & NETWORKING FIXTURES
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (Rmtrs)
9
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
12
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
SINK
[Providing and supply of black colour, acid and corrosion resistant PP sink with integral 50mm pipe threaded drain outlet as a one piece unit. Sink shall be injection moulded from pure polyolefins/ co-polymer material with inside corners coved, undercounter mounted. Sink shall be provided with the following accessories in PP- 3 way wall/ deck mounted water tap with swivelling gooseneck spout ( as per detailed drawing and specifications), anti siphon bottle trap, reducing coupler as per the outlet dia, PP pipe lengths as required to connect to drain pipe at floor. Work includes making connections in CPVC, checking connections at pressure of 4kg for 24 hours and making water tight joints. Water inlet shall be minimum 25mm dia and drain shall be minimum 50mm dia. Price to include providing and supply of Pegboard ( drying rack) of size 300 x 300, made from I mm thick SS 304 sheet with 33 nos. projected polypropylene pins, adjustable with minimum spacing of 10mm between pegs, suitable to hold different sizes of glassware. A drip channel with drain tube shall be provided at the bottom for draining out water with a flexible pipe conncetion to the nearest drain point. Pegboards shall be fixed on wall or furniture at accessible height.] PP sink, Internal size: 550Lx450Dx400Hmm
1
-
-
SS 304 Brust steel finish 750 x 750 mm peg board with 33 pegs & SS drain tray
1
-
-
Three way Goose neck Facuet
1
-
-
Anti siphon bottle trap.
1
-
-
Deck mounted double head eye wash/drench
1
-
-
Reducing coupler in PP 51 X 31MM + PP Pipe lengths - one feet length - DIA. 38MM
1
-
-
Base unit sink 2 door of size (1500Lx700Dx900Ht)
1
-
-
Base Unit Waste Storage With Chute & Bin Inside Pull Drawer -900hx550dx450l.,Full Overlay And Square Edge Steel,Lable Holder
1
-
-
PP cup sink with anti siphon bottle trap along with waste pipe
1
-
-
Under Bench 10L Waste Solvent collection Cannister with level indication Provision
1
-
-
Service enclosure for island bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
6
-
-
ISLAND BENCH - i2, i4
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
18
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
16
-
-
Base Molding rmtr
36
-
-
Filler Panel (sqmtrs)
13
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
8
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
8
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
12
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
4
-
-
ELECTRICAL & NETWORKING FIXTURES
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (Rmtrs)
21
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
22
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
4
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
4
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
14
-
-
WALL BENCH - W22, W29
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
6
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. Rmtr
17
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk.] Base unit 1 door 1 drawer of size (600WX550DX900H) with Lock & Key
4
-
-
Base Molding rmtr
5
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
3
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
1
-
-
SINK
[Providing and supply of black colour, acid and corrosion resistant PP sink with integral 50mm pipe threaded drain outlet as a one piece unit. Sink shall be injection moulded from pure polyolefins/ co-polymer material with inside corners coved, undercounter mounted. Sink shall be provided with the following accessories in PP- 3 way wall/ deck mounted water tap with swivelling gooseneck spout ( as per detailed drawing and specifications), anti siphon bottle trap, reducing coupler as per the outlet dia, PP pipe lengths as required to connect to drain pipe at floor. Work includes making connections in CPVC, checking connections at pressure of 4kg for 24 hours and making water tight joints. Water inlet shall be minimum 25mm dia and drain shall be minimum 50mm dia. Price to include providing and supply of Pegboard ( drying rack) of size 300 x 300, made from I mm thick SS 304 sheet with 33 nos. projected polypropylene pins, adjustable with minimum spacing of 10mm between pegs, suitable to hold different sizes of glassware. A drip channel with drain tube shall be provided at the bottom for draining out water with a flexible pipe conncetion to the nearest drain point. Pegboards shall be fixed on wall or furniture at accessible height.] PP sink, Internal size: 550Lx450Dx400Hmm
1
-
-
SS 304 Brust steel finish 750 x 750 mm peg board with 33 pegs & SS drain tray
1
-
-
Three way Goose neck Facuet
1
-
-
Anti siphon bottle trap.
1
-
-
Deck mounted double head eye wash/drench
1
-
-
Reducing coupler in PP 51 X 31MM + PP Pipe lengths - one feet length - DIA. 38MM
1
-
-
Base unit sink 2 door of size (750Lx550Dx900Ht)
1
-
-
Base Unit Waste Storage With Chute & Bin Inside Pull Drawer -900hx550dx450l.,Full Overlay And Square Edge Steel,Lable Holder
1
-
-
PP cup sink with anti siphon bottle trap along with waste pipe
1
-
-
Under Bench 10L Waste Solvent collection Cannister with level indication Provision
1
-
-
Service enclosure for wall bench(250x125x2800)mm
2
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
4
-
-
WALL BENCH - W24
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
11
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. Rmtr
27
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk]. Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
9
-
-
Base Molding rmtr
16
-
-
Filler Panel (sqmtrs)
7
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
6
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
1
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
11
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
13
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
1
-
-
Service enclosure for wall bench(250x125x2800)mm
2
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
WALL BENCH - W26
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
5
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. Rmtrs
11
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
3
-
-
Base Molding rmtr
5
-
-
Filler Panel (sqmtrs)
2
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
1
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
1
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table
4
-
-
Service enclosure for wall bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
WALL BENCH - W27 GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
10
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. Rmtrs
24
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
5
-
-
Base Molding rmtr
11
-
-
Filler Panel (sqmtrs)
5
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
3
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
3
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
6
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
1
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
7
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
9
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for wall bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
WALL BENCH - W23
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment.
4
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters.
9
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Filler Panel (sqmtrs)
6
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
2
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
3
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
4
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
1
-
-
Service enclosure for wall bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
WALL BENCH - W28
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
6
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. Rmtrs
13
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Filler Panel (sqmtrs)
9
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
3
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
6
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
3
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
5
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
6
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
1
-
-
Service enclosure for wall bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
WALL BENCH - W30
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment Sqmtr
4
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. Rmtrs
10
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 1 door 1 drawer of size (600WX550DX900H) with Lock & Key
2
-
-
Base Molding rmtr
2
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
1
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
1
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
2
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
1
-
-
SINK
[Providing and supply of black colour, acid and corrosion resistant PP sink with integral 50mm pipe threaded drain outlet as a one piece unit. Sink shall be injection moulded from pure polyolefins/ co-polymer material with inside corners coved, undercounter mounted. Sink shall be provided with the following accessories in PP- 3 way wall/ deck mounted water tap with swivelling gooseneck spout ( as per detailed drawing and specifications), anti siphon bottle trap, reducing coupler as per the outlet dia, PP pipe lengths as required to connect to drain pipe at floor. Work includes making connections in CPVC, checking connections at pressure of 4kg for 24 hours and making water tight joints. Water inlet shall be minimum 25mm dia and drain shall be minimum 50mm dia. Price to include providing and supply of Pegboard ( drying rack) of size 300 x 300, made from I mm thick SS 304 sheet with 33 nos. projected polypropylene pins, adjustable with minimum spacing of 10mm between pegs, suitable to hold different sizes of glassware. A drip channel with drain tube shall be provided at the bottom for draining out water with a flexible pipe conncetion to the nearest drain point. Pegboards shall be fixed on wall or furniture at accessible height.] PP sink, Internal size: 550Lx450Dx400Hmm
2
-
-
SS 304 Brust steel finish 750 x 750 mm peg board with 33 pegs & SS drain tray
2
-
-
Three way Goose neck Facuet
2
-
-
Anti siphon bottle trap.
2
-
-
Deck mounted double head eye wash/drench
2
-
-
Reducing coupler in PP 51 X 31MM + PP Pipe lengths - one feet length - DIA. 38MM
2
-
-
Base unit sink 2 door of size (750Lx550Dx900Ht)
2
-
-
Base Unit Waste Storage With Chute & Bin Inside Pull Drawer -900hx550dx450l.,Full Overlay And Square Edge Steel,Lable Holder
2
-
-
PP cup sink with anti siphon bottle trap along with waste pipe
2
-
-
Under Bench 10L Waste Solvent collection Cannister with level indication Provision
2
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
WALL BENCH - W31
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
1
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. rmtr
5
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 1 door 1 drawer of size (600WX550DX900H) with Lock & Key
2
-
-
Base Molding rmtr
2
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
1
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
1
-
-
Service enclosure for wall bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
AVT
Metal Anti Vibration Table with Granite Work Top at Center (900Lx750Dx900Ht)
5
-
-
SAFETY SHOWER
Providing and fixing of Floor mounted emergency safety showers with integrated eyewash including ABS plastic shower head, operated by a rigid pull rod and easy grip handle
2
-
-
SOLVENT STORAGE CABINETS
FM Approved storage cabinets: FM approved Self Close storages cabinets of 90 minutes Fire Rating Solvent FM Approved Self Close storages cabinets of corrosive chemicals and should be provided with a ventilation system to enable exhaust of localized fumes emanating from the chemicals stored or flammable liquids. Because of the corrosive environment the material used is 1.2 mm thick CRCA / GI sheet high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating, having scratch hardness of 3kg and passing 1000 hour salt spray test. It is fitted with a float glass to enable visibility inside the cabinet and has a tray placed at the bottom for collecting the spillage. The rate is inclusive of the cost of all the materials and involved as per drawing and detailed specifications. Dimnensions: 900mm(W) x 600 mm (D) x 2100 mm (H). 90 minutes Fire Rated FM approved Solvent Storage Cabinets with 4nos PP Tray Shelf, Tray Shelves with load capacity of 75 kgs & 1 nos Bottom PP Collection sump.
5
-
-
CHEMICAL CABINETS
Cabinets for powder storage and dry chemcials: Cabinet with outer skin material and inner material coated with chemical resistant material and epoxy or MS powder coated rack and self-closing doors, with five shelves of 500 mm depth. Dimensions: 1200mm (W) x 600 mm (D) x 2100 mm (H). The individual shelves should have holding capacity of 20 kgs.
7
-
-
OVERHEAD CABINETS
Over head cabinets - 750 mm x 400 mm, should hold weight of capacity 30 kg.
18
-
-
PLASTIC STORAGE CABINETS
Supply and Installation Opaque / Tall storage cabinet with Manual closing door, Equipped with a lockable, latching mechanism, CRCA Epoxy Powder coated with doors, approved quality hinge and operating hardware. Cabinet shall also have Adjustable leveling screws, 5 Nos adjustable shelves complete as per the detailed specification. Sizes as below
OPAQUE STORAGE CABINET - 1200 W X 600 D X 2100 H mm
16
-
-
ANIMAL HOLDING ROOM WALL BENCH - W25
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
3
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. rmtrs
8
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
2
-
-
Base Molding rmtr
6
-
-
Filler Panel (sqmtrs)
3
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
2
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
2
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
3
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
4
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
1
-
-
Service enclosure for wall bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
CLASS II, A2 BIOLOGICAL SAFETY CABINET CLASS II, A2 BIOLOGICAL SAFETY CABINET WITH A MANUAL ADJUSTMENT STAND OF L= 1400 MM, D = 815MM, H =1610 MM WITH TWO NO.S OF ELECTRICAL SOCKETS WITH FLAP.
1
-
-
Biosafety cabinet caster set (102 mm) and Duratex or similar brand phenolic wheel with front locking wheels
1
-
-
Biosafety cabinet UV germicidal light
1
-
-
Fume hood microprocessor-based airflow monitor and vertical alarm
1
-
-
Panel mounted service fitting for gas
1
-
-
Bio safety internal piping service
1
-
-
IVC Individually ventillated animal caging system
Standalone type Ventilator (Air Handling Unit)
Standalone type IVC Ventilator unit shall be in 304-grade stainless steel construction. Unit shall consist of two separate modules for supply of clean air to animal cages and to evacuate contaminated air from the cages. Both the modules will individually consist of following;
Suitable design silent operation blower to handle supply air / exhaust air.
Pre filter & Hepa filter, grade H4 & H14 of suitable size
Supply / Exhaust air fan with speed regulator
Necessary electrical & controls to monitor various parameters such as Air Changes per hour, average cage temperature and humidity, working pressure mode.
Programmable Logical Controller with TFT LCD, Touch screen type color Display to set and monitoring of above referred parameters as required. The controller should be capable for necessary logging of basic parameter data up to the period of 1 year.
Run our counter with change filter notifications.
Necessary audio visual alarm system (Local) to indicate the failure of maintenance of any of the parameters mentioned above.
Housing & structure in SS 304 construction
Castor wheels in special grade nylon construction with SS housing, 2 Nos. free moving & 2 Nos. with pad lock
Supply & Exhaust air manifolds suitable to connect up to two double-sided racks or four single sided racks to each Ventilator.
Ventilator shall be suitable for connecting 2 Nos. single sided racks on each side.
Arrangement to adjust fan speed automatically as per the set value.
Ventilator shall operate on 220 V, 50 Hz, single phase AC power supply.
1
-
-
IVC rack consists of following :
Single Sided Cage Rack with air distribution system
Single sided Cage Rack suitable to mount cages from one side shall be in SS 304 construction and shall be suitable to house at least 30 Nos. of rat cages selected for the system:
The cage rack shall comprise of following;
Frame structure with air distribution ducts, supply & exhaust air headers in SS 304 construction.
Duct couplers, endcaps, supply air nozzles & exhaust air nozzles in special grade rubber construction suitable for autoclaving.
Cage runners in special grade nylon construction suitable to withstand autoclave conditions.
Suitable design castor wheels with SS 304 casing and special grade nylon wheels (2 nos. free moving & 2 Nos. with padlock arrangement).
Wire reinforced hosepipes suitable to connect supply and exhaust air headers with ventilator.
2
-
-
IVC cage in SS 304 construction consisting of ;
Animal Cage assembly with water bottle suitable for Rat IVC system
IVC cage assembly shall consist of following;
Cage bottom in polysulphone construction having floor area not less than 800 sq.cm. and cage effective height not less than 18 cm. The cage bottom will have suitable arrangement to properly house in cage rack at required position.
Cage lid in polysulphone construction with supply air and exhaust airport & water bottle port with self-closing isolators, hepa grade breather filter with filter retainer ring & cage lid clamps
Water bottle in Polysulphone construction with special grade rubber gasket and bottle cap with nozzle in SS 316 construction.
Cage grill in SS 304 construction with nylon / silicon gasket.
Cage card holder with hanger clip.
The system shall be supplied with necessary accessories such as flexible ducts to connect cage rack with the ventilator.
65
-
-
IVC Ventilator for supply & exhaust
1
-
-
LAB FURNITURE - COMPUTATIONAL LAB
LAB FURNITURE
[Providing, Design & Supply, Testing, Commissioning of best quality factory made ready built modular CRCA epoxy powder coated to 60 to 80 microns thickness laboratory furniture with working height 750 mm to 900mm high as per enclosed drawings, all surfaces zinc phosphated/degreased and epoxy powder coated to 60 to 80 microns thickness to pass the required ASTM/ IS Codes, complete as per technical specifications given in the tender document. Rate shall be inclusive of cost of all materials and operations described in the item, drilling holes, necessary welding, required nuts and bolts for joining with the supporting members, rivets, pins including all part items complete as per approved shop drawings and directions of Client in charge. Laboratory furniture in general shall consists of Pedestal mounted and under bench , sink units, Laboratory bench designed for carrying a loading of 300 Kg/sqm, reagent shelves, wall rails, storage cabinents etc. consisting of the following: ]
ISLAND BENCH - i13, i14, i15
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
32
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
24
-
-
Base Molding rmtr
62
-
-
Filler Panel (sqmtrs)
30
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
18
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
18
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
18
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
6
-
-
ELECTRICAL & NETWORKING FIXTURES
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (Rmtrs)
32
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
36
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
6
-
-
Service enclosure for island bench(250x125x2800)mm
3
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
21
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
6
-
-
ISLAND BENCH - i9
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment.
11
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
8
-
-
Base Molding rmtr
15
-
-
Filler Panel (sqmtrs)
7
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
6
-
-
ELECTRICAL & NETWORKING FIXTURES
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (Rmtrs)
9
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
12
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
1
-
-
SINK
Providing and supply of black colour, acid and corrosion resistant PP sink with integral 50mm pipe threaded drain outlet as a one piece unit. Sink shall be injection moulded from pure polyolefins/ co-polymer material with inside corners coved, undercounter mounted. Sink shall be provided with the following accessories in PP- 3 way wall/ deck mounted water tap with swivelling gooseneck spout ( as per detailed drawing and specifications), anti siphon bottle trap, reducing coupler as per the outlet dia, PP pipe lengths as required to connect to drain pipe at floor. Work includes making connections in CPVC, checking connections at pressure of 4kg for 24 hours and making water tight joints. Water inlet shall be minimum 25mm dia and drain shall be minimum 50mm dia. Price to include providing and supply of Pegboard ( drying rack) of size 300 x 300, made from I mm thick SS 304 sheet with 33 nos. projected polypropylene pins, adjustable with minimum spacing of 10mm between pegs, suitable to hold different sizes of glassware. A drip channel with drain tube shall be provided at the bottom for draining out water with a flexible pipe conncetion to the nearest drain point. Pegboards shall be fixed on wall or furniture at accessible height. PP sink, Internal size: 550Lx450Dx400Hmm
1
-
-
SS 304 Brust steel finish 750 x 750 mm peg board with 33 pegs & SS drain tray
1
-
-
Three way Goose neck Facuet
1
-
-
Anti siphon bottle trap.
1
-
-
Deck mounted double head eye wash/drench
1
-
-
Reducing coupler in PP 51 X 31MM + PP Pipe lengths - one feet length - DIA. 38MM
1
-
-
Base unit sink 2 door of size (1800Lx700Dx900Ht)
1
-
-
Base Unit Waste Storage With Chute & Bin Inside Pull Drawer -900hx550dx450l.,Full Overlay And Square Edge Steel,Lable Holder
1
-
-
PP cup sink with anti siphon bottle trap along with waste pipe
1
-
-
Under Bench 10L Waste Solvent collection Cannister with level indication Provision
1
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
6
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
ISLAND BENCH - i10
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
11
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
10
-
-
Base Molding rmtr
19
-
-
Filler Panel (sqmtrs)
7
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
4
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
6
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (Rmtrs)
10
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
12
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
1
-
-
Reagent Rack 1500W 150D 885H With 3 Nos Outer Shelves
7
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
WALL BENCH - W15
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. sqmtr
6
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. rmtrs
14
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Filler Panel (sqmtrs)
10
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
4
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
7
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
3
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
1
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table
5
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
7
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
1
-
-
Service enclosure for wall bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
M1
WALL BENCH - W14
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
2
-
-
GRANITE WORK TOP Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. Rmtr
7
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
2
-
-
Base Molding rmtr
4
-
-
Filler Panel (sqmtrs)
2
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
1
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
1
-
-
C-frame structure of 2190 (L) x 750 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
1
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
2
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
3
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
1
-
-
Service enclosure for wall bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
M2
WALL BENCH - W12
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
2
-
-
GRANITE WORK TOP Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. Rmtr
7
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
2
-
-
Base Molding rmtr
4
-
-
Filler Panel (sqmtrs)
2
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
1
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
1
-
-
C-frame structure of 2190 (L) x 750 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
1
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
2
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
3
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
1
-
-
Service enclosure for wall bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
WALL BENCH - W13
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
5
-
-
GRANITE WORK TOP Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. Rmtr
11
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
4
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
7
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
3
-
-
C-frame structure of 2190 (L) x 750 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
2
-
-
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (Rmtrs)
1
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
4
-
-
Service enclosure for wall bench(250x125x2800)mm
5
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
1
-
-
M3
WALL BENCH - W11
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
2
-
-
GRANITE WORK TOP Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. Rmtr
7
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
2
-
-
Base Molding rmtr
4
-
-
Filler Panel (sqmtrs)
2
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
1
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
1
-
-
C-frame structure of 2190 (L) x 750 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
1
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
2
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
3
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
1
-
-
Service enclosure for wall bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
M4
WALL BENCH - W10
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
5
-
-
GRANITE WORK TOP Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. Rmtr
11
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
2
-
-
Base Molding rmtr
8
-
-
Filler Panel (sqmtrs)
3
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
2
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
2
-
-
C-frame structure of 1500 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
C-frame structure of 750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
1
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
4
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
5
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
1
-
-
Service enclosure for wall bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
M5
WALL BENCH - W9
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
2
-
-
GRANITE WORK TOP Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. Rmtr
7
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (750WX550DX900H) with Lock & Key
2
-
-
Base Molding rmtr
4
-
-
Filler Panel (sqmtrs)
2
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
1
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
1
-
-
C-frame structure of 2190 (L) x 750 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
1
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
2
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
3
-
-
Cutout provisions for Data & Networking with polycarbonate faceplate
1
-
-
Service enclosure for wall bench(250x125x2800)mm
1
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
2
-
-
AVT Metal Anti Vibration Table with Granite Work Top at Center (900Lx600Dx900Ht)
1
-
-
OVERHEAD CABINETS
Over head cabinets - 750 mm x 400 mm, should hold weight of capacity 30 kg.
25
-
-
CLASS II, A2 BIOLOGICAL SAFETY CABINET WITH A MANUAL ADJUSTMENT STAND OF L= 1400 MM, D = 815MM, H =1610 MM WITH TWO NO.S OF ELECTRICAL SOCKETS WITH FLAP. Biosafety cabinet caster set (102 mm) and Duratex or similar brand phenolic wheel with front locking wheels
4
-
-
Biosafety cabinet UV germicidal light
4
-
-
Fume hood microprocessor-based airflow monitor and vertical alarm
4
-
-
Panel mounted service fitting for gas
4
-
-
Bio safety internal piping service
4
-
-
LAB FURNITURE - BSSE CELL CULTURE LAB - 01
LAB FURNITURE
[Providing, Design & Supply, Testing, Commissioning of best quality factory made ready built modular CRCA epoxy powder coated to 60 to 80 microns thickness laboratory furniture with working height 750 mm to 900mm high as per enclosed drawings, all surfaces zinc phosphated/degreased and epoxy powder coated to 60 to 80 microns thickness to pass the required ASTM/ IS Codes, complete as per technical specifications given in the tender document. Rate shall be inclusive of cost of all materials and operations described in the item, drilling holes, necessary welding, required nuts and bolts for joining with the supporting members, rivets, pins including all part items complete as per approved shop drawings and directions of Client in charge. Laboratory furniture in general shall consists of Pedestal mounted and under bench , sink units, Laboratory bench designed for carrying a loading of 300 Kg/sqm, reagent shelves, wall rails, storage cabinents etc. consisting of the following: ]
WALL BENCH - W7, W8
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
4
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. Rmtr
11
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (500WX550DX900H) with Lock & Key
2
-
-
Base Molding rmtr
8
-
-
Filler Panel (sqmtrs)
4
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
1
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
1
-
-
C-frame structure of 1750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
3
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
4
-
-
Cutout provisions for Data & Networking with SS faceplate
2
-
-
Service enclosure for wall bench(250x125x2800)mm
2
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
4
-
-
CLASS II, A2 BIOLOGICAL SAFETY CABINET CLASS II, A2 BIOLOGICAL SAFETY CABINET WITH A MANUAL ADJUSTMENT STAND OF L= 1400 MM, D = 815MM, H =1610 MM WITH TWO NO.S OF ELECTRICAL SOCKETS WITH FLAP.
2
-
-
Biosafety cabinet caster set (102 mm) and Duratex or similar brand phenolic wheel with front locking wheels
2
-
-
Biosafety cabinet UV germicidal light
2
-
-
Fume hood microprocessor-based airflow monitor and vertical alarm
2
-
-
Panel mounted service fitting for gas
2
-
-
Bio safety internal piping service
2
-
-
LAB FURNITURE - BSSE CELL CULTURE LAB - 02
LAB FURNITURE
[Providing, Design & Supply, Testing, Commissioning of best quality factory made ready built modular CRCA epoxy powder coated to 60 to 80 microns thickness laboratory furniture with working height 750 mm to 900mm high as per enclosed drawings, all surfaces zinc phosphated/degreased and epoxy powder coated to 60 to 80 microns thickness to pass the required ASTM/ IS Codes, complete as per technical specifications given in the tender document. Rate shall be inclusive of cost of all materials and operations described in the item, drilling holes, necessary welding, required nuts and bolts for joining with the supporting members, rivets, pins including all part items complete as per approved shop drawings and directions of Client in charge. Laboratory furniture in general shall consists of Pedestal mounted and under bench , sink units, Laboratory bench designed for carrying a loading of 300 Kg/sqm, reagent shelves, wall rails, storage cabinents etc. consisting of the following: ]
ISLAND BENCH - i11, i12
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
4
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (5000WX550DX900H) with Lock & Key
4
-
-
Base Molding rmtr
8
-
-
Filler Panel (sqmtrs)
3
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
2
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
2
-
-
C-frame structure of 1750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
2
-
-
ELECTRICAL & NETWORKING FIXTURES
250x75mm size Metal Race way with cable divider for power line & data line seperation for Island Table (Rmtrs)
3
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
4
-
-
Cutout provisions for Data & Networking with SS faceplate
2
-
-
Service enclosure for island bench(250x125x2800)mm
2
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
4
-
-
WALL BENCH - W1, W2, W3, W4, W5
GRANITE WORK TOP
Providing and supply of Table top 20mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment. Sqmtr
8
-
-
GRANITE WORK TOP
Providing and supply of 100mm high backsplash with 20mm thick mirror polished jet black granite with half round bull nosing on the top. Skirting to be fixed to wall surface with suitable adhesive like Araldite or equivalent. Rate is inclusive of cost of all materials and operations described above and in general specifications. Rate is inclusive cost of all the material and labour. Finished work shall be measured in running meters. Rmtr
29
-
-
BASE CABINETS
[Providing and supply of steel cabinet bodies with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.
c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk. ] Base unit 2 door 1 drawer of size (500WX550DX900H) with Lock & Key
10
-
-
Base Molding rmtr
20
-
-
Filler Panel (sqmtrs)
8
-
-
Knee space with work top support frame, apron railing of size, (750Lx900H)
5
-
-
SS top revolving chair with SS back rest on nylon castor wheel with SS guard
5
-
-
C-frame structure of 1750 (L) x 900 (W) x 900 (H) mm dimension, in 60 x 30 x 2 mm thick hollow pipe construction, with individual pure epoxy powder coating of 70-80 micron thickness to provide chemical resistance (any additional supports required should be considered as part of this item). It should meet all the international standards in addition to SEFA 8M certification.
5
-
-
ELECTRICAL & NETWORKING FIXTURES 150x75mm size Metal Race way with cable divider for power line & data line seperation for wall Table (rmtrs)
8
-
-
Cutout for 20Amps 1 phase 3 pin Industrial plug and socket controlled by 20 Amps Tiny Trip MCB.The assembly shall be housed in existing raceway
10
-
-
Cutout provisions for Data & Networking with SS faceplate
5
-
-
Service enclosure for wall bench(250x125x2800)mm
5
-
-
Bench Fitting With 1 Needle Valve 90 Deg - Spare
10
-
-
CLASS II, A2 BIOLOGICAL SAFETY CABINET CLASS II, A2 BIOLOGICAL SAFETY CABINET WITH A MANUAL ADJUSTMENT STAND OF L= 1400 MM, D = 815MM, H =1610 MM WITH TWO NO.S OF ELECTRICAL SOCKETS WITH FLAP.
7
-
-
Biosafety cabinet caster set (102 mm) and Duratex or similar brand phenolic wheel with front locking wheels
7
-
-
Biosafety cabinet UV germicidal light
7
-
-
Fume hood microprocessor-based airflow monitor and vertical alarm
7
-
-
Panel mounted service fitting for gas
7
-
-
Bio safety internal piping service
7
-
-
CENTRIFUGAL EXHAUST BLOWER & ACCESSORIES [Supply, Installation, Testing & Commissioning of Spark Resistant Single Inlet Single Width (SISW) IMPORTED PP Exhaust Blowers direct driven by IE 4 Flame Proof Motor with the following capacity. Drive Motor shall be suitably rated & VFD compatible (VFD in Electrical Tender), TEFC Foot mounted, 3 phase, 50 Hz, 415 Volts, IP 55, Protection Class F & Class B Temperature rise. The blower & motor assembly shall be suitable for outdoor application with necessary anti vibration cushy foot mounting, Inlet & outlet transparent flexible hose with fixing clamps on both ends, suitable clamp adapter, Radium Sticker for blower tag number, Electro galvanized pedestal motor stand and fasteners like bolts, nuts and washers, base frame, motor protection guard & accessories. Blower & Motor capacity shall be selected (Costed) with a safety of at-least 10 % higher than rated capacity. Blower outlet velocity Not to Exceed 15 m/s. Please note the blower drive motor capacity has to be arrived on bases of actual SP loss calculation after the ducting layout is approved. The data provided is indicative & for the purpose of tender only. The blower shall be connected to the existing exhaust header with a suitably sized PP FRP damper & Flexible connections. The necessary cable end terminations / earthing on the blower motor has to be coordinated with the respective electrical vendor. The cost for the connection has to be included as part of the system. All accessories shall be of Flame Proof construction]
BLOWER TAG NO : SCB - 1A (FLAME PROOF) - EXISTING BLOWER CAPACITY : 3000 CFM
STATIC PRESSURE : 200 MM WG
BLOWER TAG NO : SCB - 1B (FLAME PROOF) - REDUNDANCY BLOWER CAPACITY : 3000 CFM STATIC PRESSURE : 200 MM WG
Makes : Colasit, Venplast, Plastifier
1
-
-
PP-FRP DUCTING (SQMTR) WITH ACCESSORIES
[Supply, Installation, Testing & Commissioning of PP-FRP / ducting with glass lined (GL) finish & PPH Pipes. FRP lining shall be of fire resistant Isophthalic resin. Duct pricing shall be inclusive of all necessary accessories like - Flanges, bends, entry branches, tapers, inspection door, PP FRP Suction hood, 5mm thk Neoprene gasket shall be used in between each flange joints, GI bolt & nuts, washers, Duct Supports, hanger threaded rods with anchor bolts for fixing in roof / wall. Rate shall be inclusive of 2 coates of enamel painting for duct surface. Mode of measurement shall be in sq mtr, measured as circumference of duct outer surface x running length. Extra will not be paid for accessories such as flanges, bends, elbows, Y piece, branch off, reducer, entry doors, inspection doors, gaskets, Radium Sticker showing blower number, scrubber number, airflow directions & future provision on the duct surface etc. Maximum Length of Duct not to Exceed 2500 mm.]
Ducting Below 200 mm Dia - PPH Pipes
10
-
-
Ducting upto 500 mm Dia - wall thickness shall be 3 mm PP and 3 mm FRP Ducting above 501 mm Dia - wall thickness shall be 4 mm PP and 4 mm FRP - RO Note: DUCT / PIPE sizes OF 180mm OD (166mm ID) & Below are of PN 4 / SDR 26 PP / PPH PIPES (FACTORY FABRICATED)
DUCT / PIPE sizes above 200mm OD (188mm ID) ARE OF PP MATERIAL WITH FRP (FABRICATED DUCTS)
Thickness of PP Flange for Duct shall be 2 times of the specified Duct Thickness with FRP coating over & above
Maximum Main Duct Velocity Not to Exceed 3000 FPM / 15 m/s.
25
-
-
PVC BRAIDED FLEXIBLE HOSE (RMTR) WITH NECESSARY FIXING CLAMPS ON BOTH SIDE
[Supply, Installation, Testing & commissioning of PVC Braided Flexible connecting hose with Necessary Hose Clamps on both the ends. (Each Flexible length Not exceeding 1M Length)] 125 mm Dia
4
-
-
PVC BRAIDED FLEXIBLE HOSE (RMTR) WITH NECESSARY FIXING CLAMPS ON BOTH SIDE
[Supply, Installation, Testing & commissioning of PVC Braided Flexible connecting hose with Necessary Hose Clamps on both the ends. (Each Flexible length Not exceeding 1M Length)] 325 mm Dia
7
-
-
PP VOLUME CONTROL DAMPER (SQMTR)
Supply, Installation, Testing & Commissioning of PP Circular Volume control damper shall be as follows outer casing 3mm PP + 3mm FRP, flanges with 6mm PP + 3mm FRP, Disc of 8 mm PP, centre shaft of 20 mm Dia PP with brass bush, lock & graduation arrangement with SS wing nut & blots for circular ducts. (Mode of Measurement = Cross sectional Area OR Internal face area of the damper).
1
-
-
CONSTANT AIR VOLUME DAMPERS (Number) - CAV FOR EXHAUST AIR
[Supply, Installation, Testing & Commissioning of Circular Constant Air Volume Dampers to control Exhaust Air volume. CAV shall be made out of Chlorine - Plastic body (M1 fire resistance classification) housing the silicone regulating membrane with Rotative ring for calibrated air passage with Stainless Steel regulation spring. Elastomer double lip-seal for airtight connection with duct. The details to be read as CAV No & Capacity. All CAV quoted shall be suitable for 20% Variation in Airflow.]
SIZE : 100 DIA
4
-
-
CONSTANT AIR VOLUME DAMPERS (Number) - CAV FOR EXHAUST AIR
[Supply, Installation, Testing & Commissioning of Circular Constant Air Volume Dampers to control Exhaust Air volume. CAV shall be made out of Chlorine - Plastic body (M1 fire resistance classification) housing the silicone regulating membrane with Rotative ring for calibrated air passage with Stainless Steel regulation spring. Elastomer double lip-seal for airtight connection with duct. The details to be read as CAV No & Capacity. All CAV quoted shall be suitable for 20% Variation in Airflow.]
SIZE : 300 DIA
7
-
-
Gas Services
[Supply, Laying, joining, testing and commissioning of SS316 seamless Tube, as per attached specification with necessary specialities like bolts, nuts, washers, clamps, cutting,bending , welding(Orbital welding with UHP Argon Purging to be considered for joining tubes & fittings above false celling without unions),Tagging(Acrylic) etc. The rate quoted to be inclusive of necessary wall bores, cutting through walls as per dwg. Mode of measurement shall be in running Meters as described below. ]
Makes: Scoda/Ratnamani/Maxim 3/4"OD X 0.065"thick SS 316 TUBING (CO2 qty: 78) mtrs
78
-
-
1/2"OD X 0.049"thick SS 316 TUBING (N2 qty: 162, CO2 qty:66) mtrs
228
-
-
1/4"OD X 0.035"thick SS 316 TUBING (N2 qty: 42, CO2 qty:48) mtrs
90
-
-
[Supply & fixing, testing and commissioning of SS316 Elbow, as per attached specification. Mode of measurement shall be in numbers as described below.]
makes: EX-LOK/SG-LOK/ EQUIVALENT 3/4"OD- Double Compression fittings (CO2 qty: 10) nos
10
-
-
[Supply & fixing, testing and commissioning of SS316 Double Compression fittings End caps, as per attached specification. Mode of measurement shall be in numbers as described below.]
Makes: EX-LOK/SG-LOK/ EQUIVALENT 3/4"OD (N2 qty: 2, CO2 qty:2) nos
4
-
-
1/2"OD (N2 qty: 4, CO2 qty:5) nos
9
-
-
[Supply & fixing, testing and commissioning of SS316 Double Compression fittings Ferule end unions, as per attached specification. Mode of measurement shall be in numbers as described below.]
makes: EX-LOK/SG-LOK/ EQUIVALENT 3/4"OD (CO2 qty:2) nos
2
-
-
1/2"OD (N2 qty: 2, CO2 qty:2) nos
4
-
-
1/4"OD (N2 qty: 2, CO2 qty:2) nos
4
-
-
[Supply, Installation, Testting and commissioning of SS316 BALL VALVE with tube fitting end connections, as per attached specification. Mode of measurement shall be in numbers as described below. working pressure 20bar. ]
makes: EX-LOK/SG-LOK/ EQUIVALENT 3/4"OD (CO2 qty:1) nos
1
-
-
1/2"OD (N2 qty: 3, CO2 qty:3) nos
6
-
-
1/4"OD (N2 qty: 7, CO2 qty:14) nos
21
-
-
[Supply & fixing, testing and commissioning of SS316 Tee, as per attached specification. Mode of measurement shall be in numbers as described below. ]
makes: EX-LOK/SG-LOK/ EQUIVALENT 3/4"OD X 1/2"OD -Orbital weld fittings (CO2 qty:4) nos
4
-
-
3/4"OD X 1/4"OD -Orbital weld fittings (N2 qty: 0, CO2 qty:1) nos
1
-
-
1/4"OD X 1/4"OD -Orbital weld fittings(N2 qty: 3, CO2 qty:3) nos
6
-
-
1/2"OD X 1/4"OD -Orbital weld fittings(N2 qty: 10, CO2 qty:11) nos
21
-
-
1/2"OD X 1/2"OD -Orbital weld fittings(N2 qty: 7, CO2 qty:2) nos
9
-
-
[Supply & fixing, testing and commissioning of SS316 Reducer, as per attached specification. Mode of measurement shall be in numbers as described below.] makes: EX-LOK/SG-LOK/ EQUIVALENT 1/2"OD X 1/4"OD -Orbital weld fittings (N2 qty: 3, CO2 qty:2) nos
5
-
-
Semi Auto Change Over Panel Single Stage, Gas Purity 99.9999% Grade,
MOC : SS316 O rings: FKM Diaphragm: Hastelloy & Seat PTCFE
Max Inlet=300 Bar
Outlet Control Range: 0-10 bar
Nominal Flow -20Nm3/h – (300 LPM)
Regulation done by 2 Stage with inbuilt Filter,
With 2 numbers of Inlet Shut-Off Diaphragm Valves,
With 2 numbers of Internal Diaphragm Purge Valves
With 1 number of Pressure relief valve in panel
Outlet Normal Gauges,50 mm dial size, 0-16bar range Pressure gauges safety according to EN 837
With Inlet & Outlet Ports=1/4"FNPT.
All mounted on a stainless steel back plate, Easy mountingf manifold to ground plate and fix with one screw only,
Makes: GCE DRUVA/ROTAREX/ TESCOM (N2 qty: 1, CO2 qty:1) Set
2
-
-
1/4" OD SS Flexible Hose(Internal SS) with Safety Wire, Approx 1.0 Meter length for Hose ends= Tube end fittings working pressure 200bar. (N2 qty: 4, CO2 qty:4) nos
8
-
-
1/4" OD SS Check Valves, Cracking pressure-1 PSIG & Tube end fittings.working pressure 200bar. MOC: SS(N2 qty: 4, CO2 qty:4) nos
8
-
-
1/4" OD SS 0.5 micron filter , Ends= Tube end fittings. working pressure 200bar.(N2 qty: 4, CO2 qty:4) nos
8
-
-
Cylinder connection bullnose.working pressure 200bar.(N2 qty: 4, CO2 qty:4) nos
8
-
-
3/4" OD SS316 Double Compression fitting X 1/4" MNPT connector.(CO2 qty:1) nos
1
-
-
1/2" OD SS316 Double Compression fitting X 1/4" MNPT connector.(N2 qty: 1) nos
1
-
-
Supply, Installation, Testting and commissioning of 1/4"OD SS316 BALL VALVE with tube fitting end connections, as per attached specification. Mode of measurement shall be in numbers as described below. working pressure 200bar. (N2 qty: 4, CO2 qty:4) nos
8
-
-
Panel connectors 1/4" OD SS316 Double Compression fitting X 1/4" MNPT connector. (N2 qty: 10, CO2 qty:10) nos
20
-
-
Safety Relief Valves —Proportional Relief Valves 1/4” OD Moc SS316 AT SET PREESURE 12.5 bar (N2 qty: 1, CO2 qty:1) nos
2
-
-
Supply,fabrication,erection of SS 304 plate 4mm thickness and structural Members, suitable for mounting of manifold valves, pressure gauges, valves, necessary supports, fabricated to required design and shape as per site requirements, etc. including bending, cutting, clamps, bolts, nuts, fixed with dash through fasteners, concrete supports/ foundation bolts etc. complete. The rate shall be inclusive of cost of all the materials, labour Mode of measurement shall be in kgs of Stainless steel fixed at site. (N2 qty: 20, CO2 qty:20) Kg
40
-
-
Supply,fabrication,erection of CO2 Heater with end connection. The end connection to match with line size. (CO2 qty:3) nos
3
-
-
[Supply, Installation, Testting and commissioning of Line pressure Regulator for Bench/Wall Mounting, MOC:SS316L/SS316 , Total flow 150 LPM, Inlet Pressure= 14 Bar, Outlet Pressure= 1 to 10 Bar, With Hastelloy/ Alloy X-750 Diaphragm/SS316, Safety Relief Valve, Inlet & Outlet Pressure Gauge & Inlet/Outlet Ports =1/4" FNPT. ] makes: GCE DRUVA/ROTAREX/ TESCOM
Regulator with end connectors 1/2" OD SS316 Double Compression fitting X 1/4" MNPT connector. (N2 qty: 2, CO2 qty: 3) Set
5
-
-
Regulator with end connectors 1/4" OD SS316 Double Compression fitting X 1/4" MNPT connector.(N2 qty: 1) Set
1
-
-
Supply and Installation of MS cylinder stand for (2+2nos) cylinder & 8 Nos Bracket with chain, as per attached specification. Mode of measurement shall be in numbers as described below. (N2 qty:1, CO2 qty: 1) Set
2
-
-
Installation, testing and commissioning of SS316 EQUIPMENT CONNECTOR with tube fitting end connections, as per attached specification. Mode of measurement shall be in numbers as described below. (N2 qty:7, CO2 qty: 14) nos
21
-
-
Supply installation, testing and commissioning of Pressure gauge Bourdon type with SS siphon and Ball Valve, Dial Size: 6", Bottom entry size: 1/4" BSP, Diaphragm: SS316 Coated with teflon, Contact parts: SS316, Movement: SS 316, Block: SS 316, Accuracy : +/- 1% of range span, Over range protection: 125%, Case & Bezel: SS 304 with screwed Bezel of ABS plastic, Mounting: Direct with bottom entry, Standard Fitments: Micro adjustable pointer (internal) blow out disc. The rate quoted shall include for supply of providing necessary Barrel Nipples, isolation valve & jointing material like Teflon tape, etc.
Note :Pressure gauges scale range shall be atleast twice the working pressure as per ASME B14.100 Clause -4.3.
makes: BAUMER/WIKA/SWAGELOK
(N2 qty:1, CO2 qty: 1) nos
2
-
-
Power coated GI Rail Channel With Rail Nut(For all size of tubes as per BOQ),Rail Channel PP End Caps, M10 GI Threaded Rod, M10 GI Plane Washer & nut, M10 GI Anchor Bolt For Threaded Rod, MS ISA, Base Plate MS (IS 2062 steel), M12 Bolts, Nuts & Expansion Bolts (High tension HILTI)drilling, wall bores, cutting through walls, fixing support, welding, cutting etc. ) (N2 qty: 80, CO2 qty: 80) rmtrs
160
-
-
Clamp & Rail Nuts (for Tube)-PP +SS 304- 3/4"OD (CO2 qty: 78) rmtrs
78
-
-
Clamp & Rail Nuts (for Tube)-PP +SS 304- 1/2"OD (N2 qty: 162, CO2 qty: 66) rmtrs
228
-
-
Clamp & Rail Nuts (for Tube)-PP +SS 304- 1/4"OD (N2 qty: 42, CO2 qty: 48) rmtrs
90
-
-
Tagging- Acrylic (N2 qty: 100, CO2 qty: 100) nos
200
-
-
GAS DETECTORS & HOOTER
Supply, Testing, Commissioning of Electro chemical based OXYGEN DEPLETION GAS DETECTOR with Display and Hooter.
Gas Detectors For 0-25% of volume, Alram set point will be, Falling - 19.5%, Raising - 23.5% as per the industry standard and the detector should have 4-20mA / RS485 output.
ATEX/IECEX approved Material : Housing Epoxy painted Aluminum alloy LM25
Certification : ATEX/IECEx/CSA IP Rating : IP66
Power supply : 24VDC
Output signal : RS485 / 4-20mA
Operating power : 18~31 VDC (24V DC normal)
Operating Temperature : -20°C to +60°C Humidity : 0% to 99% Rh Accuracy : ±3% / Full scale
7
-
-
Supply, installation, Testing, Commissioning of IR based CARBON DI-OXIDE with Display and inbuilt Hooter.
Gas Detectors For 0-2% of volume and Alram set point will be 0.6% volume as per the industry standard or as per user requirement.
4-20mA output ATEX/IECEX approved Material : Housing Epoxy painted Aluminium alloy LM25
Certification : ATEX/IECEx/CSA IP Rating : IP66
Power supply : 24VDC
Output signal : RS485 / 4-20mA
Operating voltage : 18~31 VDC (24V DC normal)
Operating Temperature : -20°C to +60°C Humidity : 0% to 99% Rh Accuracy : ±3% / Full scale
4
-
-
GAS LEAK DETECTION PANEL :
Supply, installation, Testing, Commissioning of Gas Leak detection Panel suitable upto 12 detectors having RS-485 / 4-20mA outputs and should to activate annunciation, terminal blocks, Suitable rating SMPS with 20% safety factor to be considered. The controller shall be with 32 bit microprocessor, working in standalone or networkable mode, with real time clock and historical database & Peer to Peer Communication. CE Approved Power supply input: 240 VAC
Power supply output : 12 to 32 VDC
Communication provision to integrate to the BMS : Mdobus RS485/BACNET/IP
IP protection : IP-52 rating
Display : 7" HMI
Battery back up : 30min.
The Panel and cubicle type made out of 14/16 SWG MS CRCA sheet which is derusted, degreased, phosphated and passivated with angle iron skeleton or sheet folded construction. The panel to be dust and vermin proof, (IP52) with powder coated paint after suitable seven tank pretreatment. The panel made out of cold rolled sheet and doors fitted with Neoprene gaskets and fasteners. (set)
1
-
-
GAS BANK CHANGEOVER MONITORING DDC PANEL
Supply, Installation, Testing, Commissioning of GAS BANK CHANGEOVER MONITORING SYSTEM - DDC Controller: IP Based DDC Controller with IO module, the controller shall be NATIVE BACNET/IP based Building Controller (B-BC certified) complying to BACnet standard ISO 16484-5 protocol version 1.14 or latest and MODBUS RTU / RS-485 PORT for intigrating to the announciation panel. The controller shall be with 32 bit microprocessor, working in standalone or networkable mode, with real time clock and historical database & Peer to Peer Communication. The DDC's shall store programs and program parameters in non-volatile memory. DDC controller shall be housed in a suitable encloser made out of 14/16 Swg MS CRCA sheet which is derusted, degreased, phosphated and passivated with angle iron skeleton or sheet folded construction. The panel to be dust and vermin proof type(IP-52) and with powder coated paint. The panel will have suitable mounting arrangement including mounting plate, power supply unit like stepdown/control transformer/SMPS, MCB & power socket, LED lamp with limit switch arrangement etc.,
Note: The controller shall be selected to cater to the I/O requirement given in the I/O list and control flow diagram.
IO Points :- AI - 12 no's AI(Analogue Input)-FOR PRESSURE TRANSMITTER (set)
1
-
-
Supply, installation, Testing, Commissioning of Annunciator Display Panel with controller shall have IOs for 4 Gasses with 2 banks in each gases. The annunciation display panel should display each bank full, empty and acknowledgement for alarm and buzzer with Audio-Visual Display (LED) arrangement and Power Supply for visual and audio equipment and Programming and Testing of logic for annunciator functions. The controller shall be with 32 bit microprocessor, working in standalone or networkable mode, with real time clock and historical database & Peer to Peer Communication. The DDC's shall store programs and program parameters in non-volatile memory. This panel will take inputs from DDC panel via MODBUS RTU / RS-485 PORT, terminal blocks. 5A SMPS AC 240V to 32/12V DC conversion (for without voltaged drop) with all wiring & accessories. The Panel and cubicle type made out of 14/16 SWG MS CRCA sheet which is derusted, degreased, phosphated and passivated with angle iron skeleton or sheet folded construction. The panel to be dust and vermin proof with powder coated paint after suitable seven tank pretreatment. The panel made out of cold rolled sheet and doors fitted with Neoprene gaskets and fasteners. (Set)
1
-
-
Supply, installation, Testing, Commissioning of Pressure Transmitter with mouting accessories suitable for IP65 enclouser. Power supply : 24VDC/AC
Output signal : 4-20mA
Operating power : 18~31 VDC (24V DC normal)
Operating Temperature : 0°C to +50°C Humidity : 0% to 95% Rh Accuracy : ±3% / Full scale
4
-
-
CABLES & CONDUITS
[Supply,laying,testing and commissioning of 1100V grade, XLPE insulated FRLS armoured / unarmoured Copper conductor cable as per IS 7098 and Brass double end compression glands, copper lugs with end terminations. The cable shall be laid in existing trenches / cable trays as required with rate include of cable route markers, name plate. The cable shall be clamped at regular intervals to the supports in trench or on cable trays or brick wall using MS clamps, cable ties and fasteners.]
4C 1.5 Sqmm XLPE insulated shielded Armoured FRLS outer shethed copper cable (from GDS panel to each gas detector ) mtrs
350
-
-
2C 1.5 sqmm XLPE insulated shielded Armoured FRLS outer shethed copper cable - (from Announciation - DDC controller panel MODBUS and Announciator Display panel) mtrs
200
-
-
4C 1.5 sqmm XLPE insulated shielded Armoured FRLS outer shethed copper cable - (from pressure Transmitter at gas bank (for 4-20mA) TO DDC panel) mtrs
150
-
-
32mm 1.6 mm thick MS conduits with necessary accessories flexible pipe, bends, collars, junction boxes, clamps, spacing bars/ saddle as specified. The scope of the work is including of fixing necessary flexible conduits, pipe, bends, collars, junction boxes, clamps, spacing bars/saddle as specified, tying of the conduit with reinforced rods, chipping along the wall fixing chicken mesh and making good surface of wall as required at site. The detailed conduit layout preparation for Asthetic look will be in contractor scope. mtrs
300
-
-
CABLE TRAY.
[Supply, unloading , shifting & installation in horizontal & vertical formation of prefabricated galvanised sheet steel with powder coated cable tray of different widths and delivered in standard lengths along with Coupler plates. All the necessary bends (horizontal/ vertical), tees, cross, elbows, reducers, etc., as shown in the drawing and as per the site condition. The running rate shall include bends , T section and couplers. raceway made out of 14swg sheet steel,supporting angle frame / slotted angle at every 1.2 mtr, bottom angles, anchor fasteners, bolts and nuts etc. The rate shall include for all accessories like bends, elbows, tees, coupler plates, joints and fixing accessories etc., which will be measured as linear measurement. Inside the area pregalvanized powder coating cable tray with coating is 90GSM & powder coatong shall be 40-50 micron. Thickness of cable trayy sheet steel for 50 mm to 300 mm cable tray = 2.0 mm thick and minimum height of the raceway is 50 mm. Thickness of cable tray cover for all width of cable tray is 1.6 mm ]
150mm(W) x 50mm(H) wide powder coated cable tray RO mtrs
100mm(W) x 50mm(H) wide powder coated cable tray RO mtrs
1
-
-
50mm(W) x 50mm(H) wide powder coated cable tray mtrs
250
-
-
Supply & Installation of structural GI threadod rod with slotted angle, nuts, bolts, anchor fasteners etc. mtrs
250
-
-
POWER SOCKETS & WIRING
[Supply, Installation and Testing of Plug sockets. The assembly shall be housed in metal box / on partition / on wall concealed type. Rate shall include the internal wiring, terminations, GI back box and front face plate, enclouser with fixing accessary like lugs, screws, blot nuts, ferruls etc. as per tender technical specifications. Necessary wall chipping, drilling & fixing of back box in concelead type.Rate shall be included backbox fixing concelead on the wall and chipping along the wall fixing chicken mesh and making good surface of wall as required at site.] Modular Single phase 2 No 6/16 Amps multi pin flush & screw type socket outlet controlled by 2 Nos 16 Amps flush & screw type SP switch, polycorbonate plate & back box of approved make.
3
-
-
[Supply and laying of circuit Mains & power wiring using 1100V grade PVC insulated multi strand FR-LS flexible copper cable and in conduits. The scope of the work includes fixing necessary flexible conduits, pipe, bends, collars, junction boxes, clamps (every 500mm), ferruls, spacing bars/ saddle as specified, tying of the conduit with reinforced rods, chipping along the wall fixing chicken mesh and making good surface of wall as required at site. The detailed conduit layout preparation for Asthetic look will be in contractor scope. ] 3 Core 4 sqmm multi strand PVC insulated FR-LS copper flexible cable. With 25mm dia heavy duty FRLS PVC conduit(For 1 phase power wiring) mtrs
100
-
-
Supply,installation, testing & commisioning of 1-port Standard face plate of size 2.5x4, Material should be ABS /UL94 V-0. Holder Jack of ABS UL 94V-0, Cover label of Acrylic UL94V-0 , Color White
3
-
-
Supply,installation, testing & commisioning of 1-2 Module GI BackBox. Rate shall include chipping, alignment and good surface on wall.
3
-
-
RACKS & CABLE MANAGERS
Supply,installation, testing & commisioning of UL certified cabinet 4 U Closed Rack wall mounting type and Racks configuration will be welded frame with vented top cover with fan mounting provision, Associated Front Glass with Lock & Key, 1phase 230V, Rack mount Power Distribution Unit with 3nos of 6/13A universal power socket with plug controlled by 20A DP MCB horizontal type.The rate includes the complete set like cooling fans, cable manager etc.
1
-
-
Supply,installation, testing & commisioning of 1U Single-sided horizontal Cable manager, finger-duct style.
1
-
-
POTABLE WATER [Supply, laying, joining, testing and commissioning of CPVC 4120 SDR 11/SCH40 plastic pipe as per ASTM D-2846/ASTM F 441 pipeline with necessary slope. The rate quoted shall include for (All fittings shall be SCH40 as per ASTM F439)necessary Unions,Reducer,Coupling,Tee, Reducer tee, Elbow, Male adapter, Female adapter, End cap, Brass couplings, Flange, Gaskets, clamps Male/Female Adapter brass threaded coupling, Adhesives solution(ASTM F-493), Wall bores cutting through walls, U clamps etc. as per dwg to be considered for all sizes of every 1.5 mts distance. Note: Mode of Pipe measurement will be centreline measurement without any additional measurement for bends, Tee, reducers and fittings, supports etc.] 40 mm dia mtrs
50
-
-
25 mm dia
30
-
-
20 mm dia
130
-
-
[Supply, erection,testing & commissioning of CPVC ball valves with end connections of approved make as per detailed specification with bolts, nuts, gaskets, washers, etc.(as per attached specification). ] 40 mm Dia (nos)
4
-
-
25 mm dia
1
-
-
20 mm dia
46
-
-
[Supply of STAUFF Clamp Engineering, Procurements of materials, Packing, Loading, Transportation from Vendors Works to Site, Delivery & Unloading at site of Supports for tubes and pipes. The Package shall consist of the following:] 40 mm dia
50
-
-
25 mm dia
30
-
-
20 mm dia
130
-
-
Installation, testing and commissioning of SS/CPVC/BRASS EQUIPMENT CONNECTOR with tube fitting end connections, as per attached specification. Mode of measurement shall be in numbers as described below.
38
-
-
Installation, testing and commissioning of SS/CPVC/BRASS SOURCE CONNECTOR with tube fitting end connections, as per attached specification. Mode of measurement shall be in numbers as described below.
24
-
-
Supply installation, testing and commissioning of Pressure gauge Bourdon type with SS siphon and Ball Valve, Dial Size: 6", Bottom entry size: 1/4" BSP, Diaphragm: SS316 Coated with teflon, Contact parts: SS316, Movement: SS 316, Block: SS 316, Accuracy : +/- 1% of range span, Over range protection: 125%, Case & Bezel: SS 304 with screwed Bezel of ABS plastic, Mounting: Direct with bottom entry, Standard Fitments: Micro adjustable pointer (internal) blow out disc. The rate quoted shall include for supply of providing necessary Barrel Nipples, isolation valve & jointing material like Teflon tape, etc.
Note :Pressure gauges scale range shall be atleast twice the working pressure as per ASME B14.100 Clause -4.3.
4
-
-
Power coated GI Rail Channel With Rail Nut(For all size of tubes as per BOQ),Rail Channel PP End Caps, M10 GI Threaded Rod, M10 GI Plane Washer & nut, M10 GI Anchor Bolt For Threaded Rod, MS ISA, Base Plate MS (IS 2062 steel), M12 Bolts, Nuts & Expansion Bolts (High tension HILTI)drilling, wall bores, cutting through walls, fixing support, welding, cutting etc. ) Rmts
80
-
-
Clamp & Rail Nuts (for Tube)-PP +SS 304- 40mm Rmts.
50
-
-
Clamp & Rail Nuts (for Tube)-PP +SS 304- 25mm Rmts.
30
-
-
Clamp & Rail Nuts (for Tube)-PP +SS 304- 20mm Rmts.
130
-
-
Tagging- Acrylic
200
-
-
GAS CABINET
Supply,Installation of Oxygen gas with 1+1 cylinder Gas cabinet- with closing door,Type 90,Storage capcity is 50Liters Cylinder 2Nos Equipped with a lockable, latching mechanism, Considering Change over panel with flexible hose,filter, Check valve, isolation valve,Bull nose connection with cylinder holding bracket with chain or Belt , CRCA Epoxy Powder coated with doors, approved quality hinge and operating hardware. Cabinet shall also have Adjustable leveling screws, adjustable shelves complete as per the detailed specification. Sizes as belowW 895 x D 596 x H 2070 MM
1
-
-
Supply,Installation of Zero Air Gas with 1+1 cylinder Gas cabinet- with closing door,Type 90,Storage capcity is 50Liters Cylinder 2Nos Equipped with a lockable, latching mechanism, Considering Change over panel with flexible hose,filter, Check valve, isolation valve,Bull nose connection with cylinder holding bracket with chain or Belt , CRCA Epoxy Powder coated with doors, approved quality hinge and operating hardware. Cabinet shall also have Adjustable leveling screws, adjustable shelves complete as per the detailed specification. Sizes as belowW 895 x D 596 x H 2070 MM
1
-
-
SUPPORTS
Supply, fabrication, erection of Mild Steel miscellaneous & Tubing structural supports consisting of chequred plates, Anchored Plate MS(IS 2062 steel), M12 Bolts, Nuts & Expansion Bolts (High tension HILTI) , rods, angles, Square Hollow Sections, Channels, beams, pipes fabricated to required design and shape as per site requirements, cage works for gas bank & equipment frame works etc. including welding, cutting, clamps, bolts, nuts, fixed with dash through fasteners, concrete supports/ foundation bolts etc. complete. The rate quoted shall include for Nessacessary Standard bolts & nuts ,welding, cutting, finish with sand blasting as per enclosed procedure ana red oxide zinc chromate painting one coat & 2 coats of Berger Epilux epoxy(Equivalent) painting as per approved color of 150micron thickness etc. as per dwg details. Kgs
1000
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements