Indian Institute Of Science Tender

ANTITERMITE TREATMENT Providing and injecting chemical emulsion for Pre­constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits, with chloropyriphos emulsifiable concentrates of 20% concentration, including cost of chemical, diluting in water to one percent concentration, labour, HOM of equipments, complete as per specifications. (Plinth area of the building at ground floor only shall be measured)specification. The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge.

Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 180kgs,with 40mm and down size graded granite metal coarse aggregates @ 0.85cum and fine aggregates @ 0.57cum machine mixed,machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.

Providing and laying in position plain cement concrete of mix M15 with OPC cement @ 240kgs,with 20mm and down size graded granite metal coarse aggregates @ 0.878cum and fine aggregates @ 0.459cum machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted,, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. in plinth cills, The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge. - GROUND FLOOR

Providing and laying cement concrete using 20mm and down size granite jelly or ready mixed concrete M 25 Grade concrete for Roof beams and slabs for RCC works laid in 15 cm thick layers and well compacted including vibrating curing and necessary steel or ply wood or plank centering and form work etc., including smooth finish in CM 1:3, with all lead and lift loading , unloading and other incidental charges etc., complete. (exculsive of cost of steel and fabrication charges) Ground floor

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of ail materials, labour complete as per specificaitons.

Providng and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness upto 200mm including cost of all materials, labour complete as per specifications.up to 3.50m from Ground level.Specification No. KBS 4.6.2 The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge - Height for 0 to 3.5 mts - TERRACE FLOOR

Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and /or welding wherever required, tying with binding wire of approved and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of material, labour, HOM of machineries complete as per specifications. Specification No. KBS 4.6.3. Fe 550 The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge - FOOTING, PEDESTAL, COLUMN

Providing and constructing precast concrete solid blocks with compressive strength not less than 5 Newton per sqmm with cement mortar 1:4 masonry (quoin, Jamb, closer blocks ) with solid concrete blocks of size 40x20x20cms conforming to I.S: 2185/1965 in superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications. The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge - GROUND FLOOR

Providing and fixing flush door shutter (35 mm thick both side teak) made out of solid core black board type, well seasoned chemically treated hard wood batterns and internal frame with 45 mm wide wooden frame all round door shutters covered with cross bonded wooden sheets ( core veneer ) hot pressed and fastened on both side of the dooe=r using liquid phenol formadehyde resin as per IS specification 2202( Part i ) 1991. From manufacturer complete as per specification. The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge - TERRACE FLOOR

Providing and fixing 65mmx125mm GRP Doorframe fabricated using E-Glass Chopped Strand Mat (CSM) U.V- stabilized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0mm. The doorframe consists of four segments, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement on 6 locations for high screw holding capacity for fixing metalling hold fast and shall be consolidated by filling with medium density foam/Plaster of Paris with fibre reinforcement. Six Numbers of 260mmx25mmx5mm size 'S' shaped M.S. flat hold fast shall be provided with the frame. The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge. - GROUND FLOOR

Providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per Sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing, complete as per specifications. (length of mesh only be measured for payment) The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge.

Providing applying two coats of wall putty to inside plastered wallls and ceiling using white cement putty.scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers,including cost of all amterials, cost of labour and scaffolding etc complete as per specification.

Providing 12mm thick cement plaster (ceiling) in single coat with cement mortar 1:3 to ceiling including rounding off corners wherever required smooth lime rendering, : Providng and removing scaffolding, including cost of materials, labour, curing complete as per specifications. The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge - GROUND FLOOR

Providing 18mm thick cement plaster in single coat with cement mortar 1:6 to brick masonry including rounding providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge. External - GROUND FLOOR

Providing & applying water proofing to roof slab, terraces, landscape area, podium etc., using modified polyurethane cures (conforming to ASTM C836-84) to give a tough elastomeric waterproof membrane on the surface. The surface shall be cleaned free from dust and other particle before usage. standards & methodology : This compound has a medium viscosity grade with 620% of elongation and shall be done either by roller application/brush application/ spray. This will be applied for a thickness of 1.3mm first layer 0.5mm & 2nd layer 0.8mm. After applying the 2nd layer sand sprinkle shall be done to provide mechanical key.

Providing and layingm-15 cement concrete flooring, 60 mm thick with metallic concrete hardner toping, under layer of 45mm thick m-15 cement concrete using broken granite metal of 20mm and down size, and top layer 50mm thick of metallic cement hardner consisting of mix 1:2 ( 1 cement hardner mix : 2 granite metal 10mm nominal size ) by volume, with which metallic hardening compound of approved quality mix in the ratio of 4:1 (4 part of cement and 1 part of metallic floor hardening compound of approved quality by wt), including finishing cost of materials, labour, curing, complete as per specifications

Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. scraping & levelling the surface using steel blade and preparing the surface even & smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc; complete as per the specification. Area toi be considered- (a) 100% for fresh surface The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge - GROUND FLOOR

Providing and applying painting in two coats with plastic emulsion paint with primer of approved brand on wall surface to given an even approved shade after thoroughly brushing the surface,free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour , complete as per specifications. The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge - GROUND FLOOR

Providing and applying painting in two coats with plastic emulsion paint with primer of approved brand on ceiling and /or sloping roof to given an even approved shade after thoroughly brushing the surface,free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour , complete as per specifications. The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge - GROUND FLOOR

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifugal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications. The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical sp ecifications and instructions of Engineer in charge. The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge - GROUND FLOOR

Providing and applying enamel metal paint two coats (excluding priming coat ) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications. The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge - GROUND FLOOR

Providing and doing waterproof treatments to roof slab using 2 coats of acrylic co polymer elastomeric Eaze coat from perma chemicals sealer and protector . The surface shall be prepared free of dust and fungus etc., The shall be applied primer coat by using 1:1:6 ie 1 part SBR 1part white cement and 6 part of water. over this flexible membrane coating will be done spreading 40 GSM Geo textile cloth or Fiber Mesh as reinforcing material between two coats

Fabrication supplying and erecting M.S. tubular trusses of all spans as per approved drawing and Design with prefabricated steel applications using quality material and are durable, reliable and corrosion and abrasion resistant.welding shall confirm to latest stuctural welding code.Quality shall be on various parameters like shape,size,deign gauge and polish.THe entire trusses is anchored in RCC column by using 4 nos of M.S. anchor bolts at each support with 10mm thick base plate and shoe plate. The work includes cutting,staightening, placing in position of M.S. pipes and welding wherever necessary and applying one coat redoxide to all the membersincluding cost of all materialss,labour charges,and hire charges of machanineries for cutting,welding ,grinding and erction equipments, with all lead and lift,transportation etc complete as per specifiaction.

Providing and fixing in position in cement concrete 1:3:6 steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings using Z angles of 25x33x3mm, weighing 1.419 Kg/m both for outer and inner frames and central mullion section of size 25x46x3mm. weighing 2.28Kg/m duly providing T section 19x19x3mm weighing 0.839 kg/m for glazing of windows not more than 34 cms. c to c including providing and fixing 4mm. thick reeded glass with teakwood beading of required size, all steel sections should confirm to I.S 7452:1990, 4nos. of holdfasts of approved size, section should be cut to length welded and electrically grinded subdividing frames of unit shall be tenonned and revetted into the frames electrically. All the steel surface shall be throughly cleaned free of rust and painted with one coat of anti-corosive paint and finishing with two coats of ready mix paint of approved colour and make including cost of materials, fixtures, labour and HOM of machinery complete as per specifications.

Providing and laying in position yelahanka tiles of size 250 x 250mm of approved quality and make, over a bed of cement mortar 1:3 an average thickness 25mm over weather proof course and pointed with cement mortar 1:3 mix with red oxide including curing cost of materials, labour complete as per specifications.

Providing, fabricating, assembling and fixing in position anodized aluminium doors Powder coated using following aluminium mat finish or glossy finish, outer frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg/m, top section 47.62x44.45mm thickness 3.00mm, section weight 1.426kg/m bottom section 114.3x44.45 thickness 3.18mm, section weight 2.646kg/m, door central section 49.91x44.45mm thickness 3.00mm, section weight 1.495 kg/m glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections anodized 12 to 15 microns cut to length joint metred corners grinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m. thick plain glass for top and bottom panel; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherance of mortars or any other sticky materials; the assembled frame fitted with the corner angles, strips and fitted with screws, rawl plugs or teakwood gutties to R.C.C. columns or masonry on sides. beams and flooring in bottom. including cutting, chistling and making good with cement mortar to match the surface; all the frames throughly cleaned free from rust, scale, or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications.

Providing and fixing pull and push type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel laths by means of alternate clips, suspension shaft with High tension coil type springs two numbers, mounted on specially designed pipe shaft, with bracket plates, guide channels, ball bearing arrangements, for inside & outside locking with push & pull operations complete including pulling hooks, 4Nos. handles with all fittings and accessories, painted with a coat of red lead paint (without top cover) cost of materials, labour, HOM of machinery complete as per specifications. Shutter size 3mx2.8 m

Providing & fixing pre cast solid concrete Kerb stone made out of CC1:2:4 with top & bottom width 114 & 165 mm respectively .400 mm high & 450 mm in length finished in Cm 1:3 plastering & finishing cutting,including form work ,curing,including cost of all materials ,labour,hire charges of machinery,loading ,unloading, lead and lift ,transportatio, etc., complete The rate shall be inclusive of all taxes and GST etc,. and work shall be carried out as per the technical specifications and instructions of Engineer in charge - GROUND FLOOR

Dismantling of Fencing ,cleaning and Refixing of Existing Fencing Etc

Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws - 20MM,

Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws - 25mm

Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws - 32mm

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 1-3Way

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete 6 Way

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete 8Way

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete 10-12Way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module.

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Modul

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.10 -12 Module

Supply and Fixing 100x50mm Raceway conduits Approved make MK

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12936Amps one way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12936Amps 3way socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16Amps one way switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12936/16Amps universal socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps SP

Supplying and fixing regular MCCB distribution Panel confirming to IS 8828, on wall / wood board / flush mounting using required clamps, bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440Volts 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/ three phase suitable capacity MCCB/MCB's as outgoings confirming to IS8828. 8Way

Supplying and fixing regular MCCB distribution Panel confirming to IS 8828, on wall / wood board / flush mounting using required clamps, bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440Volts 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/ three phase suitable capacity MCCB/MCB's as outgoings confirming to IS8828. 12Way

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value ≥ 4.2 CMM / Watt, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor wdg. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, watt& current , Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty. 48" Sweep 5 Star (1200mm)

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1.5 sqmm

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 sqmm

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.4 sqmm

Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x 4' - 20/22w

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clampsOn wall / ceiling / Rafter / Girders

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame.

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300mm)

Supplying and drawing UTP-CAT 6E LAN cable

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable 2Pair

Supplying & Fixing of Patch panel for LAN cabling 48 Port 10/100 patch panel

Miscellaneous works during excecution of work at site