Hubli Electricity Supply Company Limited Tender

code01 - Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO 3046 Generator set specifications Engine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade), Dry type air cleaner, Shutoff coil, The enclosure has the following features: Specially designed to meet stringent MOEF/CPCB norms of 75dBA @ 1 m at 75% load under free field conditions, Two point lifting for easy handling at customer site, Designed to have optimum serviceability, Air inlet louvers specially designed to operate at rated load made on special purpose CNC machines for consistency in quality and workmanship, Powder coated for long lasting service life and superior finish, With UV resistant powder coating, can withstand extreme environment, Use of special hardware for longer life, Insulation material meets exacting IS8183 specifications for better sound attenuation,Flush styling-noprojections, Fluid drains for lubeoil and fuel, Fuel filling point inside theen closure. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules. 82.5 KVA/66kw Kirloskar make of recent edition.

code02 - Supply, Erection, testing and commissioning of AMF panel suitable for. kVA DG set.The panel is of cubical type base/floor mounting control panel withhing eddoors, undrilled bottom gland plate,aluminium Bus Bar with the accommodation for. A4 pole contactor foral ternator with the rmalO/Lrelay, .A4 pole contactor for mains, HRC fuse for short circuit protection, Micro processor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stoplogic, Mains/generator voltage ,. capacity by passs witch and frequency sensing, PCC 1301 controller with water temperature/ Lubeoilpressure/enginespeed,Voltage/ampere/Frequency/kVA,Running-hourcount, Noofstarts, Faultindication, over/underspeed, Failstostart, Low oil pleasure, High engine temperature, Under/overvoltage, over current, Earth faul trelay, within dications for Mainson, Loadon Mains, Battery charger on Push buttons AMF module by pass Mode, Battery charger unit within built Auto/ Manual and Flat/ Boost facility. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules. 82.5 KVA to 125 KVA

code03 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 120 Sqmm, 3.5 Core, (23 GI Strips - 4 x 0.8 mm)