Hubli Dharwad Brts Company Tender

code04 - Supply and Fixing of Puppy Dog Rider: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish. The rider is of size 0.9 m x 0.4 m x 0.55 m, Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety feature. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 0.9 m x 0.40 m x 0.76 m PUPPY DOG RIDER (HUGO)

code05 - Supply & Fixing of Two Seater See Saw : " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 1614 mm length and Dia 114 mm. It consists of 2 seats which is made of LLDPE virgin plastic of size 364 mm X 250 mm X 180 mm. Each seat consists of a safety stand in the horizontal balance bar which is of 500 mm X 462 mm and a thickness of Dia 32 mm. Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety feature against protruding hardware, aesthetic pleasing against ugly exposed hardware and prevention against vandalism as well. All joints are Robotic welded. TWO SEATER SEE SAW (HUGO)

code06 - Supply & Fixing of A Swing: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. A Shaped support posts of height 2.1 m are to be schedule Galvanized steel with a 80mm OD Outer Diameter. Toprail of length 2.58 m and Dia 76 mm shall be an all-robotic welded unit, fabricated from O.D. galvanized steel pipes. Flat Swing seat of size 440 mm x 150 mm x 30 mm, Bucket Swing seat of size Dia 325 mm and height 245 mm. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. A SWING (HUGO)

code07 - Supply & Fixing of Four Seater See Saw: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 1614 mm length and Dia114mm.It consists of 4 seats which is made of LLDPE virgin plastic of size 364 mm X 250 mm X 180 mm. Each seat consists of a safety stand in the horizontal balance bar which is of 500 mm X 462 mm and a thickness of Dia 32 mm.Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps.All joints are Robotic welded. FOUR SEATER SEE SAW (HUGO)

code08 - Supply and Fixing of Balance Beam: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.Support legs of height 211 mm and the Single Curved beam of size 1.42 m x 0.316 m are to be schedule Galvanized steel with a 89 mm OD Outer Diameter. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish. Joints ar Robotic Welded. PLAY EQUIPMENT DIMENSIONS: 4.24 m x 0.59 m x 0.3 m BALANCE BEAM (HUGO)

code09 - Supply and Fixing of Merry Go Round: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.The Centre post of height 815 mm are to be schedule Galvanized steel with a 48 mm OD Outer Diameter. Round Deck of Dia 1.21 shall be an all-ROBOTIC welded assembly fabricated from perforated solid punched steel. Deck perimeter is precision pre punched for attachments. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm. Handrail of size 815 mm x 474 mm and Dia 32 mm shall be an all-patent welded unit, fabricated from 32 O.D. galvanized steel pipes. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotice welded PLAY EQUIPMENT DIMENSIONS: Dia-1.21 m MERRY GO ROUND DX (HUGO)

code10 - Supply & Fixing of Triangle Rope Climber :" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. Support posts of height 2.1 m are to be schedule Galvanized steel with a 89 mm OD (Outer Diameter). Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. TRIANGLE ROPE CLIMBER (HUGO)

code11 - Supply and Fixing of Hexa Climber : " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. Upright structural posts of height 2.3 m, are to be schedule Galvanized steel with a 114mm OD (Outer Diameter). Parallel Climber of size 1.9 m x 1.17 m , Horizontal Ladder 1.9 m x 1.17 m , Pull up Bar, Chain climber of size 1.9 m x 1.17 m, and Gymnastic Rings of size 0.77 m x 1.17 m shall be an all patent welded fabricated from 54 mm O.D. galvanized steel pipes. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 2.2 m x 2.1 m x 2.3 m HEXA CLIMBER (HUGO)

code12 - Supply and Fixing of KPSNK 010: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS onlyThe echo II resonance tube is original instrument inspired by the popular echo game. Their unusual design intrigues children and encourages them to spontaneously experiment with sound. The game consists in two people whispering, singing or transmitting other sounds from one end of the tube to the other. No sounds can be heard outside the instrument only the person at the other end can be their recipient. This unconventional procedure makes it possible to creatively integrate those visiting a musical playground. The instruments are comply with the European standard EN 1176, EN71. The safety of our products is confirmed by a TUV SUD Certificate. The instrument can be fixed to the ground with ground anchoring systems only. Corrugated tube up to 15 meters long. Dimensions LxWxH: 15000 x 350 x 1400 mm KPSNK-010-(ECHO-I)

code13 - The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. The indoor products are all in rotomoulded LLDPE Virgin plastics The soft play are made of children-friendly foam and soft yet durable PVC. CLIMBING PEGS

code14 - Supply & Fixing of Mound triple Rope Climber: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. Rope: 16mm dia stainless steel core. Polypropylene covered braided multifilament rope. Metallic Parts 76mm dia stainless steel , AISI-304. Fixings Steel conforming to 8.8 DIN267, AISI-304.All Joints are robotic welded. ALL WELDING IS CARRIED OUT BY ROBOTS SIMMILIAR TO THE ONES USED IN THE AUTOMOBILE INDUSTRY, WHICH GUARANTEES STRONG AND SMOOTH WELDS ELIMINATING ANY RAG, WELD SCARS AND ENSURES THE INTEGRITY AND STRENGTH OF THE WELDED AREAS. PLAY EQUIPMENT DIMENSIONS LENGTH 2.2 m-2.5 m MOUND TRIPLE ROPE CLIMBER

code15 - Supply & Fixing of KPSCP - 001: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.This is designed by moving away from the ordinary game park logic; that children discover different uses of the units, come up with their own play to play with it and challange their imagination while learning to control their movements.Metal parts are comprised of ST 37 Steel with a 3- step metal finish.Sandblasting and solvent-free zinc primer coating and electrostatic powder paint application UV resistant with high value of light fastness rotomolded polyethylene parts are used to form the structure.All parts are manufactured with double wall technique with the thickness between 4-6 mm.All joints are Robotic welded. Dimensions LxWxH: 550 x 650 x 650 mm KPSCP -001

code16 - Supply and Fixing of KPS -202019: 4 Upright Structural posts are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing. The poles are welded on to a base plate made from steel with 114mm inner diameter. Specialized connectors such as clamps and couplings casted from aluminum alloy which is pretreated, cured and sandblasted are used to connect the various components of the playground. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as per EN1176 standards. Plastic Components shall be animated and shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6 - 8mm. Joints are Robotic Welded. ALL COMPONENTS MEET WITH EN-1176 SAFETY STANDARDS. Play Equipment Dimensions: 2.97 x 1.34 x 1.7m KPS -202019-5 ( 1.2 M HEIGHT)

code17 - Supply and Fixing of KPSNK 010 The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS onlyThe echo II resonance tube is original instrument inspired by the popular echo game. Their unusual design intrigues children and encourages them to spontaneously experiment with sound. The game consists in two people whispering, singing or transmitting other sounds from one end of the tube to the other. No sounds can be heard outside the instrument only the person at the other end can be their recipient. This unconventional procedure makes it possible to creatively integrate those visiting a musical playground. The instruments are comply with the European standard EN 1176, EN71. The safety of our products is confirmed by a TUV SUD Certificate. The instrument can be fixed to the ground with ground anchoring systems only. Corrugated tube up to 15 meters long. Dimensions LxWxH: 15000 x 350 x 1400 mm KPSNK-010-ECHO- II ( LENGTH 8 M)

code18 - Supply & Fixing of 1200 mm Single Mound Slide: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Equipment comprises of 2 numbers of Upright structural posts of height 2.4 m are to be schedule Galvanized steel with a 114mm OD.Single Straight Slide of size 2.41 m x 0.95 m x 2.3 m, Plastic Components [super thick plastic] shall be rotationally molded All rotational molding is carried out in state of the art, precision, bi axial roto moulding machines which helps achieve guaranteed uniform wall thickness, seamless joints, accurate process control, one part construction to make it stress free.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. All components designed and manufactured to meet with EN 1176 safety standards. STRAIGHT SLIDE DIMENSIONS: 3.60 m x 1.28 m x 2.4 m 1200 MM HUGO SINGLE MOUND SLIDE

code19 - Supply & Fixing of 180 CM Slide: . The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.A shaped support posts of height 2.58 m, are to be schedule Galvanized steel with a 60mm OD Outer Diameter. Deck of size 0.80 m x 0.60 m and Staircase of size 2.10 m x 0.60 m shall be an all welded assembly fabricated from perforated solid punched steel. Deck perimeter is precision pre punched for attachments. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm. Handrail of height 2.2 m and Dia 32 mm. Wavey Slide of size 3.54 m x 0.55 m x 2.0 m. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 4.98 m x 0.82 m x 2.58 mHPS SAL 747

code20 - Supply and Fixng of Self Weighted Rower: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached."All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Horizontal bars of length 1.26 m is to be schedule HOT DIP Galvanized steel with a 60mm O.D. and 2.2mm (wall) thickness of the tubing. Handle Bars of 0.74 m and Dia 38 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.26 m x 0.80 m x 1.59 m SELF WEIGHTED ROWER

code21 - Supply and Fixng of Arm and Pedal Bike: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached."All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Horizontal Structural post of length 1.10 m supporting Upright structural posts of height 1.23 m and Dia 60mm is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Pedals of size 108 mm & Bars of size 197 mm. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.43 m x 0.65 m x 1.23 m ARM & PEDAL BIKE

code22 - Supply and Fixng of Health Walker: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached."All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Foot Rest of size 361 mm x 161 mm are attached to the Standing Bars 957mm x 60 mm fabricated from 60 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.18 m x 0.553 m x 1.25 m HEALTH WALKER

code23 - Supply and Fixng of Seated Chest Press: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached."All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.88 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two pair of U-Shaped Bars of 1.02 m and Dia 40 mm while the handles are placed at a spacing of 698 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.82 m x 0.69 m x 1.88 m SEATED CHEST PRESS

code24 - Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m

code25 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formworkshall be paid separately) Mix 1:3:6( M) Using 20 mm nominal size graded crushed coarse aggregates

code26 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine ggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates As per PWD SR 2023-24 Item No:V1 2.2.3 Page No 15

code27 - Providing and removing centering, shuttering, strutting, ropping etc.,and removal of form work for Cement Concrete Drain Walls/slab RCC works including cost of all materials, labour complete as per specifications. At 35% of itemcode 2.2.1 for Slabs

code28 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately

code29 - Providing and fixing bright finished casement window fasteners/Jbolts/ Anchor bolts or peg stays to windows/ ventilators/Equipments with necessary welding and machine screws etc. complete.

code30 - Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications.

code31 - Supply and Fixing of 25 MM EPDM: Providing & Laying of EPDM (Ethylene Propylene Diene Monomer) Safety & Sports total 25MM [ 19 MM SBR & 6 MM EPDM ] thick Rubber flooring systems comprising two layers with the top layer of 6mm being high quality EPDM granules and the bottom layer being 19 mm SBR. There are two types of pigments used in our EPDM which are organic and inorganic pigments. Inorganic pigments are used to manufacture Class 1 colours which are more stable. The granules shall be mixed on site with specially developed binders and trowelled by hand to specified thickness creating a seamless surface. The flooring system shall be hygienic, durable with high elasticity, all weather, resilient, non slip, high impact and easy maintenance EPDM. We have two types of EPDM granules, SR 5560 & SR 6065 for the sports and Each recreational market. A Koosafe EPDM sports granule SR 5560 is resilient to both outdoor weathering and UV exposure. The Koosafe EPDM SR 6065 range is specially designed for high durability. It is suitable for running track applications. The performance requirements and test methods for impact absorbing playground surfacing shall comply with SS 495:2001 or ASTM Standards. The supplier must have carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. The rates are inclusive of all taxes, transportation charges and installation