Hindustan Aeronautics Limited Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
GEM/2024/B/5453934Bid Award Id
ViewTender No
GEM/2024/B/5453934Tender Authority
Hindustan Aeronautics Limited ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
602_technical_specification_and_rfq_terms_and_condi_2024-09-30-08-18-08_d3e949974714b3b852a1906e9f449e5e.pdf
boq_item_sample_file_2024-09-30-08-18-08_54bfda29d43831784d137b716747af16.csv
BOQ Items
HFPAD3L115 T18 , HFPAD3L115 T18FACE GROOVING BLADEEMCO 500 TURN MILLLUH LOCKING PLATEFace Grooving Blade to suit Existing ISCAR MAHPL25 Holder Width 3mm,Depth 18mm, Plunging Dia 115 To 400mm,LH FACE GROOVING BLADE
10
-
-
HGPL4002Y IC908 , HGPL4002Y IC908Face Grooving InsertsEMCO 500 TURN MILLHeliFace Coated Double Edge Face Grovoing Inserts Width 4mm, Corner Radius 0.2 Face Grooving Inserts
30
-
-
4920005425-74 , HeliFace Coated Double Edge Face Grooving Inserts Width mm, Corner Radius 0.4 INSERT GROOVING HFPL 4004 IC 808
30
-
-
GHAIL2532 , CutGrip Modular Type IDGrooving Holder Shank Dia 25mm, Total Length 200mm, LH HOLDER INTERNAL GROOVING
2
-
-
GHAIL32-3 , GHAIL323FACE GROOVING BLADEEMCO 500 TURN MILLCutGrip ID Grooving Blade DMin 32mm, Width 2.1 to 3mm, depth 3mm, LH GHAIL323 FACE GROOVING BLADE
5
-
-
PCHL-25-24 , PCHL2524FACE GROOVING HOLDEREMCO 500 TURN MILLPENTA OD Grooving Holder 25 x 25 Square, LH, Total Length 135mm, Width 0.5 to 3.2mm FACE GROOVING HOLDER
2
-
-
PENTA 24N200PF100 , PENTA 24N200PF100Face Grooving InsertsEMCO 500 TURN MILLPENTA 24N200PF100 IC 30N _ PENTA Coated 5Cutting Edge OD Grooving Inserts Width 2mm, Corner Radius 1mm, Depth 6.2mm PENTA 24N200PF100Face Grooving In
20
-
-
GHMUL25 , CutGrip External 45 Undercut Grooving Holder 25 x 25 Square, LH, Total Length 127mm, Width 3 to 6mm HOLDEREXTNL GROOVEISCAR EQLNT
2
-
-
GIP 4.00-2.00UN IC 8250 , CutGrip Coated Double Edge Undercut OD Grooving Inserts Width 4mm, Corner Radius 2 Undercut OD Grooving Insert
30
-
-
GIP 3.00-1.50UN IC 8250 , CutGrip Coated Double Edge Undercut OD Grooving Inserts Width 3mm, Corner Radius 1.5 Undercut OD Grooving Insert
30
-
-
E10M-SCLCL-06 , Solid Carbide Boring Bar with Through Coolant DMin 12mm, Shank Dia 10mm, Total Length 150mm,LH Solid Carbide Boring Bar
3
-
-
E06H-SWUBL-06 , Solid Carbide Boring Bar with Through Coolant DMin 6.5mm, Shank Dia 6mm, Total Length 100mm,LH Solid Carbide Boring Bar
3
-
-
E08K-SWUBL-06 , Solid Carbide Boring Bar with Through Coolant DMin 8.7mm, Shank Dia 8mm, Total Length 125mm,LH Solid Carbide Boring Bar
3
-
-
WBMT 060101R IC 908 , Coated Boring Inserts 0.1 CR Coated Boring Inserts 0.1 CR
30
-
-
WBMT 060102R IC 354 , WBMT 060102R IC 354WBMT 060102R IC 354
30
-
-
GEHIL 16SC-16-2 , CutGrip Solid Carbide ID Grooving Holder with Through Coolant DMin 16mm, Shank Dia 16mm, Working Length 70mm, Width 1.9 to 2.4mm, Depth 3mm, Total Length 160mm,LH CutGrip Solid Carbide ID Grooving
2
-
-
GEMI 2010Y IC 808 , CutGrip Coated Double Edge ID Grooving Inserts Width 2mm, Corner Radius 1 CutGrip Coated Double Edge ID Groo
50
-
-
HFFR 130-5T38 , Face Grooving BladeRH Width 5mm,Depth 38mm,Dia Range 130 to 180mm Face Grooving BladeRH
2
-
-
ICP 081 IC 908 , Coated SumoChamDrill Head for Body DCN 08002412A Dia 8.1mm Coated SumoChamDrill Head for Bod
20
-
-
DCN 150-075-20A-5D , SumoCham Drill Dia 15mm, Flute Length 75mm SumoCham Drill
2
-
-
ICM 150 IC908 , Coated SumoChamDrill Head for Body DCN 15007520A5D Dia 15mm Coated SumoChamDrill Head
10
-
-
GHML25 , OD Grooving Holder 25 x 25 Square, LH, Total Length 140mm, Width 0.5 to 6.4mm HOLDER EXTERNAL GROOVING
2
-
-
GIP 1.40-0.70 IC 908 , Coated Double Edge Grooving Inserts Wiodth 1.4mm, Corner Radius 0.7mm Coated Double Edge Grooving Inserts
20
-
-
DCN 060-018-12A-3D , SumoCham Drill Dia 6.2mm, Flute Length 20mm SumoCham Drill Dia 6.2mm, Flute
4
-
-
DCN 120-096-16A-8D , SumoCham Drill Dia 12mm, Flute Length 96mm DCN 12009616A8D
3
-
-
HCP 062-OQ IC 908 , Coated SumoChamDrill Head for Body DCN 06001812A3D Dia 6.2mm Coated SumoChamDrill Head for Bod
30
-
-
HCP 120-IQ IC 908 , Coated SumoChamDrill Head for Body DCN 12009616A8D Dia 12mm Coated SumoChamDrill Head
20
-
-
HM90APKT100330PDR IC908 , Required for DMG Machine Rotor mast bearing houisng.Coated Milling Inserts 3 CR Insert Milling
100
-
-
MIFHR 12C-8 , Required for DMG Machine Rotor mast bearing houisng.ID Face Grooving Holder Shank Dia 12mm, Length 100mm ID Face Grooving Holder
2
-
-
MEFL 8-1.60-0.80 IC 908 , Required for DMG Machine Rotor mast bearing houisng.Coated ID Face Grooving Inserts Width 1.6mm, CR 0.8mm Coated ID Face Grooving Inserts W
30
-
-
PCHLS 25-17 , Required for DMG Machine Rotor mast bearing houisng.PENTA 17 Size External Grooving Holder Width 0.25 to 3.18mm, 25 x 25 Square, Length 120mm, LH PENTA 17 Size External Grooving Hol
3
-
-
PENTA 17N157P079LS IC1008 , Required for DMG Machine Rotor mast bearing houisng.Coated PENTA Grooving Inserts Width 1.57mm, Corner Radius 0.79mm Coated PENTA Grooving Inserts
40
-
-
GEHIML 16-16 , ID Grooving Holder Width 0.8 to 1.9mm, DMin 16mm, SD 16mm, Length 160mm GROOVING INSERT
2
-
-
GEPI 0.80-0.00RX IC908 , Double Edge Coated ID Grooving Inserts Width 0.8mm, Corner Radius0, Depth 1.5mm ID Grooving Holder
30
-
-
HFFH 38L-2 , Face Grooving Blade Width 2mm, Dia Range 38 to 45mm, Depth 14mm Face Grooving Blade
2
-
-
HFPN 2010 IC 808 , Double Edge Coated Face Grooving Inserts Width 2mm, Corner Radius 1mm Face Grooving Inserts
30
-
-
DGTR16162 , Parting Holder Width 2mm, 16 x 16 Square,Depth 17.5mm, OAL 150mm,RH HOLDER PARTING ISCAR MAKE
4
-
-
HFPN 2002 IC 808 , Double Edge Coated Face Grooving Inserts Width 2mm, Corner Radius 0.2mm Face Grooving Inserts
30
-
-
SRSCR 2525-M06 , Profiling Holder 25x 25 Square, RH,for the Insert RCMT 0602MOHolder forRCMT 0602MO insert,
1
-
-
SRSCL2525 M06 , Note for Tool Planning DeptThis is a ISO holder.Profiling Holder 25x 25 Square, LH, for the Insert RCMT 0602MOHOLDER TURNING ISO
1
-
-
RCMT 0602M0 , Coated Profiling Inserts Dia 6mm Round InsertsCoated Profiling Inserts Dia 6mm
30
-
-
SGSF 100-1.4-22A , SelfGrip Slitting Cutter Dia 100mm, Width 1.4mm, Bore Dia 22mm SelfGrip Slitting Cutter
3
-
-
GSFU 1.4 IC 328 , Coated SelfGrip Slitting Inserts Width 1.4mm with Full Radius Coated SelfGrip Slitting Inserts
30
-
-
SGSF 100-1.6-22A , SelfGrip Slitting Cutter Dia 100mm, Width 1.6mm, Bore Dia 22mm SelfGrip Slitting Cutter
3
-
-
GSFU 1.6 IC 328 , Coated SelfGrip Slitting Inserts Width 1.6mm with Full Radius Coated SelfGrip Slitting Inserts
30
-
-
SGSF 100-2-22K , SelfGrip Slitting Cutter Dia 100mm, Width 2mm, Bore Dia 22mm SelfGrip Slitting Cutter
3
-
-
GSFU 2.2 IC 328 , Coated SelfGrip Slitting Inserts Width 2.2mm with Full Radius Coated SelfGrip Slitting Inserts
30
-
-
SGSF100-3-22K , SelfGrip Slitting Cutter Dia 100mm, Width 3mm, Bore Dia 22mm HOLDERMILLING
2
-
-
GSFU 3 IC 328 , Coated SelfGrip Slitting Inserts Width 3mm with Full Radius Coated SelfGrip Slitting Inserts
30
-
-
DCN 300-150-32A-5D , SumoCham Drill Dia 30mm, Flute Length 150mm SumoCham Drill
2
-
-
ICP 300 IC 908 , Coated SumoChamDrill Head for Body DCN 30015032A5D Dia 30mm Coated SumoChamDrill Head for Bod
20
-
-
SCD008-004-030-AP6 IC 908 , Coated Solid Carbide Drills Dia 0.8mm, Flute Length 4.8mm,Shank Dia 3mm,OAL 46mm Coated Solid Carbide Drills
20
-
-
SCD010-006-030-AP6 IC 908 , Coated Solid Carbide Drills Dia 1mm, Flute Length 6mm,Shank Dia 3mm,OAL 46mm Coated Solid Carbide Drills
20
-
-
SCD015-009-030-AP6 IC 908 , Coated Solid Carbide Drills Dia 1.5mm, Flute Length 9mm,Shank Dia 3mm,OAL 46mm Coated Solid Carbide Drills
30
-
-
SCD016-009-030-AP6 IC 908 , Coated Solid Carbide Drills Dia 1.6mm, Flute Length 9mm,Shank Dia 3mm,OAL 46mm Coated Solid Carbide Drills
20
-
-
SCD020-012-030-AP6 IC 908 , Coated Solid Carbide Drills Dia 2mm, Flute Length 12mm,Shank Dia 3mm,OAL 60mm Coated Solid Carbide Drills
20
-
-
SCD021-012-030-AP6 IC 908 , Coated Solid Carbide Drills Dia 2.1mm, Flute Length 12mm,Shank Dia 3mm,OAL 60mm Coated Solid Carbide Drills
20
-
-
SCD030-014-060-AP3N IC 90 , Coated Solid Carbide Drills Dia 3mm, Flute Length 14mm,Shank Dia 6mm,OAL 62mm Coated Solid Carbide Drills
20
-
-
EC-H4L 03-0810C6CFR.2 IC , Coated Solid Carbide ChatterFree Endmill Dia 3mm, Flute Length 8mm,Shank Dia 6mm,OAL 62mm, CR 0.2 Coated Solid Carbide Endmill
10
-
-
EC-H4L 04-1113C6CFR.2 IC , Coated Solid Carbide ChatterFree Endmill Dia 4mm, Flute Length 11mm,Shank Dia 6mm,OAL 62mm, CR 0.2 Coated Solid Carbide Endmill
20
-
-
MM EB060E05-4T05 IC 908 , Coated Solid Carbide BallNose MultiMaster Head Dia 6mm, FL 5mm, BallNose, T10 Connection INSERT MILLING
10
-
-
SR16 236P , Note for ToolingScrew should be procured on Proprietary basis. Screw is required as a spare for Iscar make Boring holder S0610HSWUBL06.Insert Screw for VBMT16 InsertsScrew
30
-
-
GIPI 3.00E-0.40 IC20N , CutGrip Coated Double Edge Grooving Inserts for Finishing Width 3mm, CR 0.4mm PRECISION CERMET INSERT FOR ID GROO
10
-
-
GIPI 3.00E-0.40 IC908 , CutGrip Coated Double Edge Grooving Inserts for Roughing Width 3mm, CR 0.4mm PRECISION INSERT FOF ID GROOVING
10
-
-
C4-SDUCL-13080-11HP , CaptoC4 LHBoring Bar Holder for DCMT11 InsertBoring Bar Holder DCMT11 Insert
2
-
-
C4 SVJBL2705016 , CaptoC4 LHBoring Bar Holder for VBMT16 InsertHolder Ext. Turning LH Sandvik Make
2
-
-
E08K-SCLCL 06-R , Solid Carbide LHBoring Bar for CCMT 06 InsertsHolder for CCMT0602 insert
3
-
-
E10M-SDUCL-06 , Solid Carbide LHBoring Bar for DCMT 07 InsertsBoring Bar for DCMT 07 Inserts
3
-
-
GEHIL 16-16-3-T3 , ID Grooving Holder Width 3mm, DMin 16mm, SD 16mm, Depth 3mm, LH ID Grooving Holder
3
-
-
SVJBL3225P16 , Turning Holder for VBMT 16 Inserts, 32 x 25 Square, LHSVJBL 3225P16
3
-
-
SVJBR3225P16 , Turning Holder for VBMT 16 Inserts, 32 x 25 Square, RHTURNING TOOL HOLDER
3
-
-
570SVLBL2516LF , Boring Bar Head for 5703C25330 HolderBORING HEAD 570SVLBL2516LF
2
-
-
570SDUCL2511 , Boring Bar HeadBORING HEAD 570SDUCL2511 SANDVIK
2
-
-
C4 LC204000075M , VDI40 to C4 Capto HolderCapto Clamping Unit Sandvik Make
4
-
-
CCGT 09T302-F1M-12PIC1008 , Coated Boring Inserts for Special Antivibration Boring Bar Corner Radius 0.2mm, Ground Insert for ID RA Value of 2Microns Boring Inserts for S A Boring Bar
30
-
-
SPMT 120408 , Coated Milling InsertsCoated Milling Inserts
100
-
-
570-SDUPL-25-11 , Boring Bar Head for AntiVibration Bar Dia 25mmLHBoring Bar Head
2
-
-
570-SDXCL-32-11 , Boring Bar Head for AntiVibration Bar Dia 32mm NeutralLHBoring Bar Head
4
-
-
TSC-20-380P , AntiVibration Carbide Boring Bar Head Type with Reduction Sleeve Shank Dia 20mm, DMin 24mm, Working Length 305mm, OAL 405mm, LH AntiVibration Carbide Boring Bar
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements