Health And Family Welfare Department Tender

P.No.117 I.No.13.4.1 V-2 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore

P.No.117 I.No.13.4.2 V-2 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore

P.No.132 I.No.14.7.2 V-2 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever eequire:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

P.No.132 I.No.14.5.1 V-2 - Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

P.No.132 I.No.14.7.3 V-2 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

P.No.134 I.No.14.10.2.2 V-2 - Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 610x460 mm bowl depth 200 mm

P.No.136 I.No.14.27.2 V-2 - Providing and fixing white vitreous china laboratory sink including making all connections including cost of fittings Size 600x450x200 mm

P.No.136 I.No.14.28.1.2 V-2 - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:Semi rigid pipe:40mm dia

P.No.137 I.No.14.40.2 V-1 - Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g

P.No.136 I.No.14.32.2 V-2 - Providing and fixing 453x357mm dia rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing .

P.No.131 I.No.14.1.1 V-2 - Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

P.No.131 I.No.14.3.1 V-2 - Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

P.No.124 I.No.13.43 V-2 - Providing and fixing trap of self ceansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors:*100mm inlet and 100mm outlet.* Sand cast iron S&S as per IS:1729.

P.No.125 I.No.13.48 V-2 - Providing and fixingon wall face unplasticised Rigid PVC rain water pipes confirming to IS:13592 Type A,including jointing with seal ring confirming to IS:5382,leaving 10mm gap for the thermal expansion,(i) Single socketed pipes 100mm diameter

P.No.6 I.No.1.6.1 V-1 - Earth work excavation for pipelines/cables by Manual means upto 600mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m

P.No.191 I.No.16.9 V-5 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover..

P-7 I-1.10 V-1 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m.Including cost of all labour complete as per specifications

P-120 I-13.22.2 V-2 - Providing and fixing PTMT grating of approved quality and colour, Rectangular type with openable circular lid

P-120 I-13.23.1 V-2 - Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.plastic ball 15 mm nominal bore, 105 mm long, weighing not less than 138 g

P-119 I-13.15 V-2 - Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931

P-119 I-13.16 V-2 - Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

P-123 I-13.34 V-2 - Providing and placing on terrace(at all floor levels), polyethylene water storage tank,IS:120701 marked,with cover and suitable locking arrangements, and making necessary holes for inlet, outlet and over flow pipes, but without fittings and the base support for tank

P-247 I-21.1.1 V-5 - Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each components

P-149 I-13.4.1 V-5 - Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amndments etc., complete. 0.50 HP/0.37 kw - 5 STG (Stage)

P-123 I-13.38 V-2 - Providing and fixing square mouth S.W.gully trap class SP-1 complete with C.I.grating,brick masonry camber 150X 100 mm size P type with non modular bcommon burnt clay bricks of designation 3.5 & with water tight.C.I cover with frame of 300X300 mm size (inside)the weight of the cover to be not less than 4.50kg and frame to be not less than 2.70kg as per standard design