Health And Family Welfare Department Tender

Quotation Rate - Providing, supplying and placing of Visitor Chair. SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 +/-0.1cm. thick hot-pressedplywood measured upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contouredlumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort topopliteal area. MID BACK SIZE 47.5 cm. (W) x 58.0 cm. (H). SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded withdensity = 45+/-2 kg/m3 and hardness load 16 +/- 2 kgf as per IS:7888 for 25% compression. ARMRESTS :The one-piece armrests are injection moulded from black Co-polymer Polypropylene. TUBULAR FRAME : The powder coated ( DFT 40-60 microns ) tubular frame iscantilever type & made of Dia 2.54 +/-0.03cm. x 0.2 +/-0.016cm.thk. M.S. ER.W. Tube. Overall Dimensions of Chair WIDTH (W): 61.4 CM. DEPTH (D): 64.5 CM. HEIGHT (H): 89.5 CM. SEAT HEIGHT (SH): 46.5 CM. This product should be certified by Indoor Advantage GOLD & GREEN PRO ---- Etc., complete including supplying, Transporting

Quotation Rate - Eco wooden storage range comprises of a range of Low height to medium height wooden HDU as per attasched DMX drg. Body : Body is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to assemble unit and is assembled with suitable KD fittings. The shelves and separator panels ( if available ) is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band. The bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. Doors : Door Panels ae made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the center of the door. The hinge door has suitable hinges and HDU is fitted with an adjustable fitting for height adjustment. The SDU runs in a PVC track mounted on the TOP and Bottom panel of the Body. HDU has a three point lock and SDU has a push type lock. All the storages are fitted with a 6 mm leveler at bottom for leveling. ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and installing of nursing station of following specification 1800 X 1650 X 600 Providing and placing panel based system spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1047mm including powder coated aluminium trims. Tiles on main spine: Combination of top tiles are fabric magneitc/white board. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in Fabric finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1800 mm w1 X 1650 MM w2 x 600 mm d. Pedestal- pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. Product shall be BIFMA LEVEL 2 Certified and Greenguard Certified. ---- Etc., complete including supplying, Transporting

Quotation Rate - Product Size -1200(W) x 450(D) x 1950*(H) (HHeight of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form arow of storage. Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel 0.8mm CRCA for 1200W, Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 80kg UDL for 1200W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows: 1200 w = 13 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Product Size - 2 Doors (LH and RH) for 1200W For 1200W storage-Each Door width 598W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - 3 Way locking provision, Click action mechanism, Key removable in locked and unlocked positions. and Zinc alloy die cast housing. Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and installing of nursing station of following specification 1800 X 1800 X 600 Providing and placing panel based system spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1047mm including powder coated aluminium trims. Tiles on main spine: Combination of top tiles are fabric magneitc/white board. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in Fabric finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1800 mm w1 X 1800 MM w2 x 600 mm d. Pedestal- pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. Product shall be BIFMA LEVEL 2 Certified and Greenguard Certified. ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and installing of nursing station of following specification 1800 X 3000 X 600 Providing and placing panel based system spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1047mm including powder coated aluminium trims. Tiles on main spine: Combination of top tiles are fabric magneitc/white board. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in Fabric finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1800 mm w1 X 3000 MM w2 x 600 mm d. Pedestal- pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. Product shall be BIFMA LEVEL 2 Certified and Greenguard Certified. ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and installing of nursing station of following specification 1800 X 4200 X 600 Providing and placing panel based system spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1047mm including powder coated aluminium trims. Tiles on main spine: Combination of top tiles are fabric magneitc/white board. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in Fabric finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1800 mm w1 X 4200 MM w2 x 600 mm d. Pedestal- pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. Product shall be BIFMA LEVEL 2 Certified and Greenguard Certified. ---- Etc., complete including supplying, Transporting

Quotation Rate - Providing, supplying and placing of Visitor Chair. SEAT ASSEMBLY: The seat assembly should be made up of 1.2 +/-0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 +/-0.03cm. x 0.2 +/-0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm. (W) x 60.5cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 +/- 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. . TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should be cantilever type & made of Dia2.54 +/-0.03cm. x 0.2 +/-0.016cm thick M.S.E.R.W. Tube. Overall Dimensions of Chair Seat Height - 46.5cm. Height - 93.5cm. Width & Depth of Chair as measured from pedestal - Width-61.0 cm and Depth-64.5 cm. This product should be certified by Indoor Advantage GOLD & GREEN PRO. ---- Etc., complete including supplying, Transporting

Quotation Rate - Product Size - 3600(W) x 450(D) x 1950*(H) (HHeight of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form arow of storage. 1200W 1 main and 1200W 2 addon Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel 0.8mm CRCA for 1200W, Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 80kg UDL for 1200W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels 1200 w = 13 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Product Size - 2 Doors (LH and RH) for 1200W For 1200W storage-Each Door width 598W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - 3 Way locking provision, Click action mechanism, Key removable in locked and unlocked positions and Zinc alloy die cast housing. Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). ---- Etc., complete including supplying, Transporting

Quotation Rate - Product Size - 4500(W) x 450(D) x 1950*(H) (HHeight of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form arow of storage. 1200W 1 main, 1200W 2 addon and 900W 1 addon Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel 0.8mm CRCA for 900W/1200W, Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 80kg UDL for 1200W unit 55kg UDL for 900W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels 900 w = 10 no of files 1200 w = 13 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Product Size - 2 Doors (LH and RH) for 1200W For 1200W storage-Each Door width 598W 2 Doors (LH and RH) for 900W 900W storage-Each Door width 448W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - -3 Way locking provision. - Click action mechanism. - Key removable in locked and unlocked positions. ---- Etc., complete including supplying, Transporting

Quotation Rate - Product Size - 900(W) x 450(D) x 1950*(H) (HHeight of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form arow of storage. 900 main Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel 0.8mm CRCA for 900W, Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 55kg UDL for 900W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows: 900 w = 10 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Product Size - 2 Doors (LH and RH) for 900W For 900W storage-Each Door width 448W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - -3 Way locking provision. - Click action mechanism. - Key removable in locked and unlocked positions. - Zinc alloy die cast housing. Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). ---- Etc., complete including supplying, Transporting

Quotation Rate - Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form arow of storage. 1 qty 900 main and 1 qty 900 addon Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel 0.8mm CRCA for 900W, Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 55kg UDL for 900W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows: 900 w = 10 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Product Size - 2 Doors (LH and RH) for 900W For 900W storage-Each Door width 448W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - -3 Way locking provision. - Click action mechanism. - Key removable in locked and unlocked positions. - Zinc alloy die cast housing. Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and installing of single bed of following specification, Overall Size:Width - 2050.0 mm Depth - 973.0 mm Height - 720.0 mm Material:Headboard panels are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 2 mm thick PVC edge banding.Bed leg frame structure consist of metal frames made of M.S. 50 x 25 mm box section in 1.2 thickness Internal Pipes made of 19 x 19 mm box section in 0.9 mm thickness. Headboard pipes are made of 25 x 25 mm box section in 0.9 mm thickness. Mattress holding bkt is made of 0.6 mm CRCA SHEET Mattress frame sheetmetal top is made of 1 mm CRCA SHEET. Hardware:The high quality hardware used. Construction:Knock Down construction.Packets: 1 packet. Finish:18 mm thick Prelaminated Particle Board is in 4501, make - GODREJ (SHIRVAL).Bed leg frame structure are powder coated in shade : MATT TAUPE WHITE. REF NO. 9001904 to thickness of 50 microns (+/-10). Mattress frame structure are powder coated in shade : EPP FR TEX. MILKY WHITE 20K, REF NO. 9003456 to thickness of 50 microns (+-10). Rest all metals are powder coated in shade : S/G CHARBROWN. REF NO. 9000605 to thickness of 50 microns (+-10). Mattress of dimension Mat 78 36 4 Thickness 50 mm.Quilting Material-PU Foam.Density of Quilting Material (+/- 2 Kg/m3)-18 Kg/m3.Mattress Top-Box Type. Cover-Fabric Composition-Polyester.MATTRESS COVER-Printe ---- Etc., complete including supplying, Transporting

Quotation Rate - Providing, supplying and placing of two seater sofa. SIDE FRAME ASSEMBLY: The side frame assembly should be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It should be made of 0 3.81 +/-0.03cm. x 0.2 +/-0.016cm. thick cmx0.16cnn and black powder coated (DFT 40-60microns). The ends should be fitted with ABS moulded end caps. TIE MEMBER: It should be the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should be used to connect the side frames. The tie-member should be of 0 3.81 +/-0.03cm. x 0.2 +/-0.016cm. thick cm x 0.16cm and black powder coated ( DFT 40-60 microns ). The seat/back assemblies should be mounted on one of the tie-member which has 5.0 +/-0.1cm x 5.0 +/-0.1 cm x 0.5 +/-0.1cm. thk - 5.5 +/-0.1cm Long MS. Std. angles welded to mount the seat and back. SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 25 +/- 2 kgf for 25% compression of the foam. The complete moulded seat rest assembly should be covered with a replaceable fabric upholstery cover SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T) BACKREST ASSEMBLY:The backrest assembly should be flexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 14 +/- 2 kgf for 25% compression of the foam. The complete moulded backrest assembly should be covered with a replaceable fabric upholstery cover. BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) ADJ. GLIDES: The adj. glide should be injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take cshould be or unleveled floor surface. Overall Dimensions of Chair Seat Height - 43.5 cm. Height - 78.5cm. Width & Depth of Chair as - Width-113.0cm and Depth-70.0 cm. ---- Etc., complete including supplying, Transporting

Quotation Rate - Product Size -1200(W) x 450(D) x 1950*(H) (HHeight of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form arow of storage. Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel 0.8mm CRCA for 1200W, Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 80kg UDL for 1200W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows: 1200 w = 13 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Product Size - 2 Doors (LH and RH) for 1200W For 1200W storage-Each Door width 598W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - 3 Way locking provision, Click action mechanism, Key removable in locked and unlocked positions. and Zinc alloy die cast housing. Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). ---- Etc., complete including supplying, Transporting

Quotation Rate - Product Size - 2400(W) x 450(D) x 1950*(H) (HHeight of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form arow of storage. 1200W 1 main and 1200W 1 addon Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel 0.8mm CRCA for 1200W, Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 80kg UDL for 1200W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels 1200 w = 13 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Product Size - 2 Doors (LH and RH) for 1200W For 1200W storage-Each Door width 598W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - 3 Way locking provision, Click action mechanism, Key removable in locked and unlocked positions and Zinc alloy die cast housing. Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). ---- Etc., complete including supplying, Transporting

Quotation Rate - Product Size - 1500(W) x 450(D) x 1950*(H) (HHeight of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form arow of storage. 1 qty 900 main and 1 qty 600 addon Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel 0.8mm CRCA for 900W, Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 55kg UDL for 900W unit , 40kg UDL for 600W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows: 900 w = 10 no of files 600 w = 6 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Product Size - 2 Doors (LH and RH) for 900W For 900W storage-Each Door width 448W Single Door for 600W Door width 448W For 600W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - -3 Way locking provision. - Click action mechanism. - Key removable in locked and unlocked positions. - Zinc alloy die cast housing. ---- Etc., complete including supplying, Transporting

Quotation Rate - 3 str-width-181cm X depth- 88cm X height-91cm X seat height-45cm FRAME MATERIAL (TROPICAL WOOD / PINE WOOD/ RUBBER WOOD): Pine Wood Moisture Content ( Recommended 12 -18 %) : 12% Anti -Tremite Treatment (Recommended Borex Powder Treatment) : Treated Wood. Leg Material-* Fixing of Leg : (Self Tapping Screw / Insert with metric threading) :- Self Taping Screw. * Material of leg : (Plastic / Insert Moulding / Wooden/ MS + Chrome Plating / SS) :- WOODEN LEG. * Bush for Leg bottom : (PVC bush / Felt Pad) :- PVC Bush ---- Etc., complete including supplying, Transporting

Quotation Rate - 2 str-width-132cm X depth- 88cm X height-91cm X seat height-45cm FRAME MATERIAL (TROPICAL WOOD / PINE WOOD/ RUBBER WOOD): Pine Wood Moisture Content ( Recommended 12 -18 %) : 12% Anti -Tremite Treatment (Recommended Borex Powder Treatment) : Treated Wood. Leg Material-* Fixing of Leg : (Self Tapping Screw / Insert with metric threading) :- Self Taping Screw. * Material of leg : (Plastic / Insert Moulding / Wooden/ MS + Chrome Plating / SS) :- WOODEN LEG. * Bush for Leg bottom : (PVC bush / Felt Pad) :- PVC Bush ---- Etc., complete including supplying, Transporting

Quotation Rate - Overall Size : Width : 119.9cm Depth : 59.9cm Height : 45cm Rubber wood under frame. High density plywood top 24 mm thickness. Curved legs with ethnic design. TABLE METERIALS & SIZE : TOP: Sheesham 18 mm LEGS: 80X80 Top Side 40X40 Bottom Side Support 45x25mm & 8 Pcs Bolt & Nut ---- Etc., complete including supplying, Transporting

Quotation Rate - Supply, Fitting & Fixing of Book Rack. Overall Dimensions is 900mm(W)x450mm(D)x1830mm(H). Rigid Knockdown construction ,Panels shall be made from CRCA 0.6 mm thick and front frame shall be made from CRCA 0.8 mm thick . CRCA D grade as per IS 513 . There shall be 5 level racks , Display tray shall be suitable for fullscape size magazines,periodicals, aesthetically appealing metal tray at an angle for easy viewing . Receding facility to access the storage behind . Sliding on plastic rollers . Behind storage shelving each of 5 level has a behind storage shelf . Uniformly Distributed Load capacity per each shelf is 40 kg . Leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns ---- Etc., complete including supplying, Transporting

Quotation Rate - Dimensions W x H x D (cm)-119.9 x 192 x 56 Material : *All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. * Upper vertical side are of 18 mm thickness in PU * Bottom side doors are of 18 mm thick MDF in PU on front * Bottom middle doors are made of 4 mm thick toughened glass with PU paint in black * All doors are fitted with push to open fittings * Levellers are provided on vertical panels at back to rest the unit properly against the wall Hardware : Hettich Construction : Knock down Finish : * All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band * PU lamination is high gloss in Ecru shade ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and placing in position office table of the following specifications. 1500W X 600D X 750H 400W X 450D X 640H(pedestal) Main Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Return Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel-Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members-Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating.Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position. Integrated Hinge Door Storage with Drawer-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with slide on hinges and handle is provided for ease of opening. Drawer is provided with ebco metabox slide and lock for security. This product should be certified by GREENGUARD, Indoor Advantage GOLD & GREEN PRO. ---- Etc., complete including supplying, Transporting

Quotation Rate - Overall Dimensions of VSDU - 2 shall be 900mm(W)x450mm(D)x711mm(H). The top shall be Metal top (1 mm add in unit height ) .The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - 'D' Grade as per IS-513 . Sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush & recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . VSDU - 2 shall have 1 no. of adjustable full shelf . Accessories optional shall be cradle with pipes for hanging godrej instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . For VSDU 2 - A4 size box file can be stored vertically on one shelf and clear space above second shelf is 220 mm . GREENPRO , GREENGUARD , INDOOR ADVANTAGE GOLD ---- Etc., complete including supplying, Transporting

Quotation Rate - Product Size - 900(W) x 450(D) x 1950*(H) (HHeight of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form arow of storage. 1 qty 900 main Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel 0.8mm CRCA for 900W, Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 55kg UDL for 900W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows: 900 w = 10 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Product Size - 2 Doors (LH and RH) for 900W For 900W storage-Each Door width 448W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - -3 Way locking provision. - Click action mechanism. - Key removable in locked and unlocked positions. - Zinc alloy die cast housing. Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). ---- Etc., complete including supplying, Transporting

Quotation Rate - Providing, supplying and placing of Mid Back Chair. SEAT ASSEMBLY: The seat assembly should be made up of 1.2 +/-0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 +/-0.03cm. x 0.2 +/-0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm (W) x 60.5 cm (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 +/- 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTRE-TILT mechanism: The mechashould be m should be designed with the following features: * 360Degree revolving type. * 17Degree +/-2Degree maximum tilt on pivot at centre * Upright position locking. * Tilt tension adjustment. . PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 +/-0.3cm. TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 +/-0.5cm. pitch-center dia. (76.3 +/-1.0cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon. Overall Dimensions of Chair Seat Height - min 43.3 to max 54.3cm. Height - min 89.5 to max 100.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. ---- Etc., complete including supplying, Transporting

Quotation Rate - SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholestry in product catalog). * SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D) * BACK SIZE : 53.0 cm. (W) x 39.0cm. (H) M.S. POWDER COATED FRAMES FOR 4 LEG CHAIRS :The powder coated ( DFT 50+/-10 microns) welded tubular main frame is made from Dia 2.54 +/- 0.03 cm x 0.2 +/- 0.016 cm and Dia1.6+/-0.3mm x 0.16 +/- 0.0128cm M.S. E.R.W tube. The Dia1.9 +/-0.3mm x 0.12 +/-0.0096 cm M.S.E.R.W. tube used as connecting member between LH & RH frames. SHOE : The shoes are made of glass filled Polypropylene compound with and pressed fitted with tubular frame. Felt is provided below the shoes. ARMREST : The Armrest are made of glass filled Polypropylene compound and assembled over the tubular frame. ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and placing in position office table of the following specifications. 1800W X 750D X 750H 400W X 450D X 640H(pedestal) Main Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Return Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel-Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members-Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating.Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position. Integrated Hinge Door Storage with Drawer-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with slide on hinges and handle is provided for ease of opening. Drawer is provided with ebco metabox slide and lock for security. This product should be certified by GREENGUARD, Indoor Advantage GOLD & GREEN PRO. ---- Etc., complete including supplying, Transporting

Quotation Rate - Supply, assembly and placement of round stool. Overall dimension should be Diagonal Leg Dia 538 mm H470 min-655max. Top plate made of SS 304 made sheet with spin section of thickness 1mm & non corrosive. It has a diameter of 305mm, seat base made of MS ring and rectangular tube. EN8 Screw having dia of 22 mm is used for height adjustment of the seat base. The round hub made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub is welded with the legs and it accommodate and cover the lead screw mechanism. The under-structure consist of 4 legs made up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg give a round & clean look. All the legs is Provided with 4 nos of Nylon-6 bush. All metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating . Safe working load is 135kg ---- Etc., complete including supplying, Transporting

Quotation Rate - Providing, supplying and placing of three seater sofa. SIDE FRAME ASSEMBLY: The side frame assembly should be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It should be made of 0 3.81 +/-0.03cm. x 0.2 +/-0.016cm. thick cmx0.16cnn and black powder coated (DFT 40-60microns). The ends should be fitted with ABS moulded end caps. TIE MEMBER: It should be the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should be used to connect the side frames. The tie-member should be of 0 3.81 +/-0.03cm. x 0.2 +/-0.016cm. thick cm x 0.16cm and black powder coated ( DFT 40-60 microns ). The seat/back assemblies should be mounted on one of the tie-member which has 5.0 +/-0.1cm x 5.0 +/-0.1 cm x 0.5 +/-0.1cm. thk - 5.5 +/-0.1cm Long MS. Std. angles welded to mount the seat and back. SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 25 +/- 2 kgf for 25% compression of the foam. The complete moulded seat rest assembly should be covered with a replaceable fabric upholstery cover SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T) BACKREST ASSEMBLY:The backrest assembly should be flexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 14 +/- 2 kgf for 25% compression of the foam. The complete moulded backrest assembly should be covered with a replaceable fabric upholstery cover. BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) ADJ. GLIDES: The adj. glide should be injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take cshould be or unleveled floor surface. Overall Dimensions of Chair Seat Height - 43.5 cm. Height - 78.5cm. Width & Depth of Chair as - Width-164.0cm and Depth-70.0 cm. ---- Etc., complete including supplying, Transporting

Quotation Rate - Supply, Assembly and placement of Examination couch with full storage- Overall dimension 1975 mm (L) x 560 mm ( W) x 805 mm (H). Examination couch with three drawers with three cabinets, inbuilt step stool and BP tray holder.the base frame should made of 30 mm x 30 mmX 1.6 thick ERW tube. The cabinets should made of 1 mm thick CRCA sheet with recessed plastic handles and with lock and plastic door latch. the hindges of the cabinet should be made of sheet metal and pin arrangement. The internal dimension of the two sidecabinets should be 422 mm (W) x 455 mm (D) x 540 mm (H). the internal dimension of the centarl cabinet should be 422 mm (W) x 455 mm (D) x 358 mm (H). The storage cabinet unit should be mount tubular base frame. The head rest should be adjustable on gas spring which should be actuated with C shaped handle lever . The drawers should made of 1 mm thick CRCA sheet with recessed plastic handles and work on double extension ball slides for smooth glide. the internal dimension of the drawer should be 330 mm (W) x 427 mm (D) x 92 mm (H). The mattress platform should be 65 mm thick which is made of 12 mm thick ply and PU foam and covered with leatherite cover.the cover should be water resistant, fire retuardant, aniti micraobial . the cover should have in-vitro cytotoxicity test report from reputed test lab. the end of the top mattress surface should be tapered end edge for ergonomic benifit. There should be ss304 made tissue roll holder present on the lower side of the back rest. There should be 1 mm thick CRCA made step stool with leveler with double extension ball slide for smooth operation. There should be 1 mm thick CRCA made BP aparatus holder which should be adjustable in height on a SS made height adjustable rod. Total load bearing capacity should be 135 kg. The examination couch should be provided with six numbers levelers made of metal & plastic for adjustment on the uneven floor. All the metal parts should be pre treated and powder coated with epoxy polyester powder coating. The product should have ISO 13485:2016 certificate from NABCB certified agency, CE certificate from european notified body with 4 digit registration code, ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 Certified ---- Etc., complete including supplying, Transporting

Quotation Rate - cold rolled M.S.sheet 0.12 +/- 0.013 cm thickness. The Shell is assembled on the Cross Beam with help of M8 Bolts. SEAT SIZE : 50.0 cm (W) x 45.5 cm (D) BACK SIZE : 50.0 cm (W) x 56.0 cm (H) CROSS BEAM: It is made up of cold rolled steel with 0.2 +/- 0.02 cm thickness. The crossbeam is powder coated. It is covered with plastic end caps LEG: It is made up of cold rolled steel with 0.12 +/- 0.013 cm thickness. It is powder coated. The legs are fitted with leveller cups covered with SS304 sheet. ARMREST: It is made of SS 304 round tube of Dia 3.175 +/- 0.03cm x 0.12 +/- 0.013 cm thick formed to make an oblong shape. ---- Etc., complete including supplying, Transporting

Quotation Rate - Providing & placing in position office table with overall size shall be 1200 Width mm x 600 Depth mm x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . This product should be certified by GREENGUARD & Indoor Advantage GOLD. ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and placing in position Multipurpose table of the following specifications. Table size shall be 1665 Width mm x 900 Depth mm x 740 Height mm . The top shall be 25 mm thick PLB with 2 mm thick PVC Edge Beading plus the Understructure shall be having C - Frames 1.6 mm thick MS supporting the top . The Legs shall be of dia. 38.1 x 1.6 mm thick MS ERW tube . This product should be certified by GREENGUARD. ---- Etc., complete including supplying, Transporting

Quotation Rate - Providing, supplying and placing of public seating. TUBULAR FRAME: The tubular frame should be made of 0 1.9 +/-0.02cm x 0.16 +/-0.0128 cm thk MS ERW tube. The frame should be powder coated (DFT 40-60 microns). The frame should be provided with injection moulded shoes., SEAT/BACK ASSEMBLY: The seat and back should be made of 0.12 +/-0.0096 cm thick CR steel perforated sheets which should be welded to a seat/back frame assembly made of of 0 1.9 +/-0.02cm x 0.16 +/-0.0128 cm thk MS ERW tube. *SEAT SIZE: 39.0cm. (W) X 41.5cm. (D) (Approx.) *BACK SIZE: 39.0cm. (W) X 21.5cm., (H) (Approx.), ARMRESTS: The armrest should be made of black integral skin Polyurethane with 50-70 Shore A Hardness and reinforced with M.S. insert. The armrest should be fitted to the armrest support made of 0 1.9 +/-0.02cm x 0.16 +/-0.0128 cm thk MS ERW tube., Overall Dimensions of Chair, Seat Height - 46.0 cm. Height - 79.0 cm., Width & Depth of Chair as - Width-55.0 cm and Depth-56.0 cm ---- Etc., complete including supplying, Transporting

Quotation Rate - Overall Size WxHxD - Double Body 1200W : 1200 x 2078** x 600 25mm WILL BE ADDED ON BOTH SIDE FOR WOODEN FRONT Body - a. Side panels, Frame & Cross L bracket are made using 0.8 mm CRCA (IS:513). b. The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles in each body. The tie rods are fixed in a shape of ‘X’ The tie rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick. CRCA IS:513 Grade. c. Optional wooden panel of 25mm thk PLT, E1-P2 grade board for PLT ref. Specification - FF04/DSN/STD/101, edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue Under Structure - Under structure is made of 0.8m CRCA (IS:513). b. Sizes of under structure for Double body : 1. 1200W x 595D x 80H Shelves - a. Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513). b. Shelf panels are placed on shelf support and then fixed using nut and bolts from below. c. Standard config. consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on unit. d. Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum. Construction- Completely Knock down construction Finish- All MS sheetmetal and metal frame components are powder coated with epoxy polyester powder to the min thickness of min 45 microns. Shelves back stiffener - At the rear side of the shelves back stiffeners are provided. These act as separators between front & rear books made of 0.8mm THK CRCA (IS:513) Label Holder -It is an aluminum extrusion of length 596mm for double body bookrack , fitted on to front of body. The Paper is 300GSM matt finish, to be inserted into the aluminum extrusion. The length of paper is 596mm for double body bookrack. GREENGUARD, INDOOR ADVANTAGE GOLD ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and placing in position office table of the following specifications. 1800W X 750D X 750H 400W X 450D X 640H(pedestal) Main Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Return Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel-Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members-Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating.Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position. Integrated Hinge Door Storage with Drawer-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with slide on hinges and handle is provided for ease of opening. Drawer is provided with ebco metabox slide and lock for security. This product should be certified by GREENGUARD, Indoor Advantage GOLD & GREEN PRO. ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and placing in position Main Table with ERU of the following specifications. Its size shall be 1650 Width x 700 Depth x 743 Height (Main Desk) 1000 Width X 450Depth X 743 Height (ERU).Top shall be of 18 mm thickness made of PLT board with 2 mm Edge banding. Wenge and savannah Maple PLT board shall be used. The Understructure shall be in pre-laminated panels made with PLT boards . 2- Drawerand 3 - Drawer storage units with different combinations to support tops made with 18 mm PLT boards of different colours.Modesty and back panels made with 18 mm PLT boards. The pedestals / storages shall be fitted with necessary locks. ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and placing in position Back unit of the following specifications. Its size shall be 1804 Width x 450 Depth x 750 Height. Top shall be made up of PVC membrane pressed of 25 mm thick MDF - one side laminate board with 0.4 mm PVC membrane Pressed on to tops. The top shall be having duck nose and half round profile edges and top is made in only one finish which is European Ash. ---- Etc., complete including supplying, Transporting

Quotation Rate - Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The back is made up of 1.2 +/-0.1cm. thick hot-pressed plywood & seat is made up of 1.5 +/-0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area. The chair seat & back size are HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H) SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45+/-2 kg/m3 and hardness load 14 +/- 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features Up-Down adjustment-6 steps (7.2 +/- 0.5cm range) Armrest top is mounted on Armrest structure made of glass filled Nylon. Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360Degree revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 +/- 0.3 cm PEDESTAL ASSEMBLY : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 +/-0.5cm. pitch-center dia. (76.1 +/-1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 113.5-123.5 CM. SEAT HEIGHT (SH): 46.0-56.0 CM. This product should be certified by Indoor Advantage GOLD, GREENGUARD GOLD, BIFMA Level 2 & GREEN PRO. ---- Etc., complete including supplying, Transporting

Quotation Rate - Providing, supplying and placing of Visitor Chair. SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 +/-0.1cm. thick hot-pressedplywood measured upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contouredlumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort topopliteal area. MID BACK SIZE 47.5 cm. (W) x 58.0 cm. (H). SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded withdensity = 45+/-2 kg/m3 and hardness load 16 +/- 2 kgf as per IS:7888 for 25% compression., ARMRESTS :The one-piece armrests are injection moulded from black Co-polymer Polypropylene., TUBULAR FRAME : The powder coated ( DFT 40-60 microns ) tubular frame iscantilever type & made of Dia 2.54 +/-0.03cm. x 0.2 +/-0.016cm.thk. M.S. ER.W. Tube. Overall Dimensions of Chair: WIDTH (W): 61.4 CM, .DEPTH (D): 64.5 CM. HEIGHT (H): 89.5 CM. SEAT HEIGHT (SH): 46.5 CM, Product shall be a GREEN PRO certified product and also shall be certified for Indoor Advantage GOLD ---- Etc., complete including supplying, Transporting

Quotation Rate - Providing, supplying and placing of three seater sofa. SEAT FOAM : The seat is made up of PU foam in Density 28 +/-2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 +/- 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 +/- 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32+/-2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2+/-0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM. ---- Etc., complete including supplying, Transporting

Quotation Rate - Providing, supplying and placing of chair with desklet.The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50+/-10 microns ) welded tubular frame should be made from 0 2.22 +/- 0.03 cm x 0.16 +/- 0.0128 cm and 3.5 +/- 0.03 cm x 1.5 +/- 0.03 cm x 0.16 +/- 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. The Armrest should be made of indoor grade PolyPropylene compound and assembled over the tubular frame. The "L" shaped desklet should be made of 1.8+-0.05cm thick prelaminated particle board with 0.2+-0.05cm thick injection moulded poly proplylene all around. Desklet should have back and front adjustment of 4.4+-0.5cm. The paper tray should be made of 0.4mm thick MS rod which is spot welded to form a mesh like structure. Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84.5cm. Width-57.5 cm and Depth-67.8 cm. This product should be certified by Indoor Advantage GOLD, GREENGUARD GOLD, GRIHA & SVAGRIHA & GREEN PRO. ---- Etc., complete including supplying, Transporting

Quotation Rate - Product Size - 2400(W) x 450(D) x 1950*(H) (HHeight of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form arow of storage. 1200W 1 main and 1200W 1 addon Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel 0.8mm CRCA for 1200W, Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 80kg UDL for 1200W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels 1200 w = 13 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Product Size - 2 Doors (LH and RH) for 1200W For 1200W storage-Each Door width 598W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - 3 Way locking provision, Click action mechanism, Key removable in locked and unlocked positions and Zinc alloy die cast housing. Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and placing in position office table of the following specifications. 1500W X 600D X 750H Worktop-Made of 25mm Thick Pre-laminated board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded together by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members-Cross Members in Unitised T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position This product should be certified by GREENGUARD, Indoor Advantage GOLD & GREEN PRO. ---- Etc., complete including supplying, Transporting

Quotation Rate - BODY All Panels :- 18mm PLB board Side, Bottom Panel :- 0.8mm PVC Edgeband Back Panel :- No Edgeband Top Panel :- 2 mm PVC Edgeband DRAWERS Fascia :- 18mm PLB with 2mm Edgeband Back Panel :- 18mm PLB with 0.8mm Edgeband Bottom Panel :- 6mm PLB MDF - No Edgeband Handle :- Aluminium Anodized handle Slide :- Powder coated Single extension full panel drawer Slides with rollers File Drawer :- File drawer provided with fifth roller arrangment DRAWER INSIDE CLEAR SPACE Box Drawer - 323 (w) x 376 (d) x 73 (h) File Drawer - 293 (w) x 376 (d) x 208 (h) MANGESH ANART CONSTRUCTION Assemble unit LOCKING BBF Pedestal :- Cam Lock & Central RH locking with actuator lever & locking strip mechanism for Box - Box - File LEVELLER Leveller base height 18mm height with levelling adjustment max 10mm CASTOR Wheel Dia 30mm with Mounting Plate Castor - Non Lockable ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and placing in position conference table of the following specifications with following size shall be 2 STR MAIN - 1350 x 710 x 740 - 4 qty 2350W - 2350 x 850 x 740 - 2 qty Work Surface-Made of 36mm thick MDFone side prelaminate board conforming to IS14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Full length access panel is provided with soft closing hinges inline with worktop edge. Worktop is available in various shapes. Understructure-The understructure consist of mixture of 18mm and 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. Modesty-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Wire Management-An array of panels made of 0.8mm and 1.2 mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Cutout for Standard Anchor Roma 4 module is provided for electrical fittings in Straight two seater and single seater modules below access flap per seat. AV Details-The table is equipped with Extron cables cubbies along with cable retractors as standard offering only for 1800mm head module, 2350mm head module, 150Degree head module and 165Degree head module. For straight two seater and single seater modules, provision to mount AV cables is provided (eg. HDMI,VGAA, etc). Only Corner 90Degree, 30Degree corner and 50Degree corner modules have provision for wire flow between adjacent tables. Additional Wirecover made of 0.8mm Thick CRCA, provided below worktop to conceal MicroAV Detailsphone wires running from table top to wire tray. This product should be certified by GREENGUARD, Indoor Advantage GOLD, GRIHA & SVAGRIHA & GREEN PRO. ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and placing in position conference table of the following specifications with overall size shall be 3600 X 1500 X 740.Work top-Made of 25mm thick MDF*one side pre*laminate board conforming to IS*14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Access panels provided with soft closing hinges. Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. Wire Management-Bottom cabinet with door is provided for flow of wires and cables. Cutout provision below Access flap at four locations for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables (eg. HDMI,VGA-A,etc). This product should be certified by GREENGUARD, Indoor Advantage GOLD, GRIHA & SVAGRIHA & GREEN PRO. ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and placing in position Main Table of the following specifications.3000 x 1050 x 740 MAIN WORKTOP :Made of 43mm Thick (+/-1) combination of MDF and particle board with top veneer facecoated with clear lacquer. All edges are edge banded with matching 1mm thick veneerlipping. LEATHER PAD:Made of 18mm Thick (+/-1) MDF with Leatherette wrapped around top surface. Thisleather pad is fixed to main top panel. DRAWER UNIT:Top panel and drawer unit modesty panel is made of 43mm Thick (+/-1) combination ofMDF and particle board with top veneer face coated with clear lacquer. All thicknessedges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade andapproved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thickPVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on topsurface. Drawer unit is provided with soft closing channels for smooth opening and closing.Drawer unit is secured with side central lock. OPEN STORAGE UNIT:Top panel and open storage unit modesty panel is made of 43mm Thick (+/-1) combination of MDF and particle board with top veneer face coated with clear lacquer. Allthickness edges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade andapproved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thickPVC lipping. MODESTY:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. Modesty is fitted with aluminum trims. UNDERSTRUCTURE:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. Door is fixed with soft closing hinges and handle is provided for ease of opening.Also lock is provided on side panel for security. ACCESS FLAP WITH POWER BOX:Soft closing access flap with power box contains 3 Universal Sockets, 2 USB powerpoints, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6connections. HIDDEN WIRELESS MOBILE CHARGER:It will only be available in 3000mm main table. It is fitted below leather pad. ---- Etc., complete including supplying, Transporting

Quotation Rate - Providing and supplying of Auditorium Chair. SEAT ASSEMBLY: The seat assembly is made of polyurethane foam moulded with M.S. tubular frame insert which is upholstered with fabric. The insert is tubular frame made of 01.9 +/-0.02cm x 0.16 +/-0.013cm thk MS. E.R.W round tube with flexible support straps running across the length and width of the frame.The Seat has an auto-tipup feature making it stay in upright position when not in use enabling clear row passage. * Approx. Seat Size : 45.5cm (W) x 46.5cm (D). BACKREST ASSEMBLY: The back assembly has a flexi back mechanism. It is made of polyurethane foam moulded with M.S. tubular frame insert, upholstered with fabric and has a plastic back cover. The insert is a tubular frame made of 01.9 +/-0.02cm x 0.16 +/-0.013cm thk M.S.E.R.VV round tube with flexible support straps running across the length and width of the frame. *Approx. Back Size : High Back- 45.5cm (W) x 82.4cm (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45 +/-3 kg/m3. SIDE PANEL / AISLE PANEL:The chair rests on the ground on two side panel frames fabricated from 0.12 +/-0.020cm thk CR steel sheet which is cladded with fabric upholstery. The side panel frame is grouted to the floor using 2 nos. of anchors for each panel through 0.3 +/- 0.05cm thk HR steel base plate. PU ARMREST (FIXED ARM):The armrest is made up of integral skin Polyurethane Foam with 65 +/- 10 Shore 'A' Hardness and reinforced with wooden insert. The armrest is snapfitted with sidepanel. POWDER COATING: Steel components are epoxy polyester powder coated (DFT 40-60 microns). FLOORING PRE - REQUISITE : The auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite Godrej doc-no: STG 129368. High Back CENTRE TO CENTRE (C): 58.7 cm. DEPTH (Di): 50.5 cm. WIDTH (W1) : 67.5 cm. DEPTH (D2) : 63.0 cm. WIDTH (W2) : 50.7 cm. DEPTH (D3) :83.6 DEPTH (D4) :97.6 SEAT HEIGHT (SH): 45.5 cm. HEIGHT (H) : 107.3cm ---- Etc., complete including supplying, Transporting

Quotation Rate - Providing and supplying of Auditorium Chair. SEAT / BACK: The seat sub-assembly is made up of 1.2+/-0.1cm Thk Plywood, upholstered with polyester fabric over moulded foam and covered with an injection- moulded polypropylene outer cover. The seat can be manually tipped-up when not in use. The back sub-assembly is made up of injection-moulded gass filled polypropylene inner upholstered with polyester fabric over moulded foam and covered with an injection-moulded polypropylene outer cover. Both these sub-assemblies are fixed to the tubular structure. *BACK SIZE: 46.3cm (W) X 59.0cm (H), SEAT SIZE: 47.0cm (W) X 49.5cm (D) TUBULAR FRAME STRUCTURE (I FRAME): The understructure is made of two straight I-leg of Dia3.81+/-0.03cm x 0.2 +/-0.016cm THK M.S.E.R.W round tube and is fixed with the seat support assembly using M8x15 INT. SOC HD M/C Screw QTY-2 NOS on each side. The seat support assembly is made of a straight and bent tube of Dia2.22+/-0.03cm x 0.25 +/-0.016cm THK M.S.E.R.W round tube with 5mm thk mounts at both ends. The Seat assembly is pivoted on this assembly. The Back assembly is mounted on a 3.15mm thick Armrest bracket. The I Frame Structure is grouted using 4 Anchor Bolts on a 5mm thick bottom plate which is welded to the upper frame structure . The Anchor Bolts are covered using 2 PP Foundation Bolt Cover which are fitted together on each leg.The I frame is used for straight layout typically. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45 +/-2 kg/Cum and Hardness load for Seat 16 +/- 2 kgf and Hardness load for back 14 +/- 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The armrest is made of Injection moulded PP compound.The Armrest is mounted on a 3.15mm thick HR sheet which is welded on the tubular frame. POWDER COATING: Steel components are epoxy polyester powder coated (DFT 40-60 microns). FLOORING PRE - REQUISITE : The auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite Godrej doc-no: STG 129368. W/o Desk: DEPTH (D1) : 65.4 cm. DEPTH (D2): 31.3 cm. SEAT HEIGHT (SH) : 46.2 cm. HEIGHT (H) : 98.4 cm. ARMREST HEIGHT(AH): 67.0 cm CENTRE TO CENTRE (C): 53.4 cm. WIDTH (W1) : 60.9 cm. WIDTH (W2) : 45.9 cm. CLEARANCE WIDTH(CW): 49.6 cm ---- Etc., complete including supplying, Transporting

Quotation Rate - Material : CERAMIC Measurement: 4FT X 4FT Stand: Built From Prime Quality CR Steel, Powder Coated In A Soothing Grey Color For Longevity And Better Aesthetics. Lightweight And Sturdy and Adjustable Height suitable for a board up to 3x4 Feet. Easy-lock pad holder for securely holding a flip chart, easel pad, or poster board. One Stop Solution For Painting, Presentation, Advertisement, Training And Display Requirements Flexible Fold type design To Ensure Minimum Vibrations While Working. And occupying no space when not in use ---- Etc., complete including supplying, Transporting

Quotation Rate - 4x3 Feet - Box type with Glass shutters ---- Etc., complete including supplying, Transporting

Quotation Rate - Material acrylic, 50 KEYS CAPACITY, 2FT X 3 FT ---- Etc., complete including supplying, Transporting

Quotation Rate - Supplying and placing in position Reception table of the following specifications. Work Surface - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS- 12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management - Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cut out provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories - Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging. Length - 1500mm Depth - 870mm Height - 1080mm This product should be certified by GREENGUARD & Indoor Advantage GOLD. ---- Etc., complete including supplying, Transporting

Quotation Rate - Overall Dimensions of Free Standing Ped With Castors For Finnesse Table shall be 390mm(W)x440mm(D)x646mm(H). The construction & Material used shall be welded assembled , 0.8 mm thick CRCA for body shell , drawer front & tray , front side stiffener ,rear aide stiffener and 1.2 mm thick CRCA Top stiffener & Bottom stoffener . The drawer fronts shall be metal front straight edge . Locking shall be 10 lever cam lock & Central RH locking with actuator & lock channel mechanism for box-box-file Pedestal . The top panel shall be metal straight edge top . Castor should be swiveling non - lockable castors mounted below the body shell for free standing full height mobile pedestal and M8 Leveling stud for free standing pedestal . The anti-tipping mechanism shall have fifth roller arrangement mounted below file drawer to avoid toppling of unit when file drawer is pulled out . Partition in drawer shall be 1 no. Partition in box drawers with lock mounted . Plastic pencil tray shall be optional accessory . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Application shall be suitable for pushing below work surface which has got a clear height of 725 mm from below . For drawer pulling side wise tapered recess provided in shell behind drawer fronts . ---- Etc., complete including supplying, Transporting

Quotation Rate - OPD COUNTER 3600W X 1500D Providing and placing WISH spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1995 MM including legs with glide screws in closed condition. Tiles on main spine: Combination of top tiles are fabric. Bottom tiles - Prelam from user side. All prelam from backs side INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in Fabric from user side & prelam from back side. GLASS ABOVE COUNTER - Vertcal front clear glass and side glass is given over the counter is out of 8mm thk toughened glass. DOOR - Door made out of honey comb paper and MDF finished laminate and PVC lipping overall thickness 31.2 mm with width of 700 mm & ht of 1956 mm Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d. TRANSACTION TOP - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 400 mm d. Pedestal- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT withmousetray - metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. ---- Etc., complete including supplying, Transporting

Quotation Rate - TELLER COUNTER 1200W X 1500D Providing and placing WISH spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1995 MM including legs with glide screws in closed condition. Tiles on main spine: Combination of top tiles are fabric. Bottom tiles - Prelam from user side. All prelam from backs side INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in Fabric from user side & prelam from back side. GLASS ABOVE COUNTER - Vertcal front clear glass and side glass is given over the counter is out of 8mm thk toughened glass. DOOR - Door made out of honey comb paper and MDF finished laminate and PVC lipping overall thickness 31.2 mm with width of 700 mm & ht of 1956 mm Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d. TRANSACTION TOP - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 400 mm d. Pedestal- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT withmousetray - metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. ---- Etc., complete including supplying, Transporting

Quotation Rate - Providing and Laying wooden flooring Flooring for Auditorium Gen ---- Etc., complete including supplying, Transporting

Quotation Rate - Railings for OPD Counter Area with all accessories Queue Management System Gen ---- Etc., complete including supplying, Transporting

Quotation Rate - The dispenser typically designed to release a specific amount of its content, usually liquids or powders/fine granular materials, with frequency 50/60Hz, with option of releasing of HOT, Cold and normal waters. Water Dispensor for Patient Waiting Area Gen ---- Etc., complete including supplying, Transporting

Quotation Rate - Providing, supplying and placing of Visitor Chair SEAT/BACK ASSEMBLY: The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with stitched cover and moulded High Resilience Polyurethane foam of Density 45+/-2 kg/m3,and hardness load 16 +/- 2 kgf for 25% compression.The stitched cover should be made from spacer fabric and leatherette. Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9+/-0.03cm x 0.16 +/-0.0128cm. It upholstered with spacer fabric and leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK SIZE : 45 cm. (W) x 60.5 cm. (D) Visitor TUBULAR FRAME: The powder coated (DFT 40-60 micron) tubular frame should be cantilever type & made of 02.54+/-0.03 cm x 0.2+/-0.016 cm thk MS ERW tube. The back connected to frame through powder coated (DFT 40-60 micron) high pressure die cast connector piece. Product has to be complied by CII Green Pro, Indoor Advantage Gold, Green Guard and BIFMA Level 2 ---- Etc., complete including supplying, Transporting