Health And Family Welfare Department Tender

PWD Volume-1 2023-24 Page No-8 It No-1.15.1 - In Ordinary/ Soft rock without Blasting Upto 1.5m Depth ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-1 2023-24 Page No-15 It No-2.1.3 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-2 2023-24 Page No-59 It No-9.1 - Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-2 2023-24 Page No-5 It No-4.1 - Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-1 2023-24 Page No-7 It No-1.9 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-1 2023-24 Page No-7 It No-1.11 - Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-1 2023-24 Page No-15 It No-2.2.3 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(FOOTING) ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-1 2023-24 Page No-15 It No-2.2.3 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PEDESTAL) ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-1 2023-24 Page No-17 It No-2.4.3 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (COLUMN) ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-1 2023-24 Page No-16 It No-2.3.2 - Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PLINTH BEAM) ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-2 2023-24 Page No-150 It No-15.5 - High Density polyethylene Membrane water proofing Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickness and having tensile strength of 25 MPa (as per ASTM D 412), elongation of 500% (as per ASTM D 412), puncture resistance of 1000N (as per ASTM E 154), peel adhesion to concrete 1200N/m (as per ASTM D 903), hydrostatic head resistance 70m (as per ASTM D 5385). The system should be fully bonded to the RCC thereby conforming to IS 16471:2017 requirements of UG waterproofing structures. The membrane should be minimum 2.4m wide to reduce the number of joints with minimum 75mm factory made selvedge’s and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self-adhesive polymer layer, etc, including surface preparation completely as per specification ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-1 2023-24 Page No-15 It No-2.3.2 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (LIFT WALL) ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-1 2023-24 Page No-18 It No-2.11a - Supplying, fitting and placing TMT FE 550 / 550 Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft Annealed steel wire and other ancilary operations complete as per drawing and technical specification. a.Buildings ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-1 2023-24 Page No-111 It No-1 - Form Work and Centering (Apendix - Vol-1, Page No -111) ( % On Finished Rate of Concrete per Cum) Foundation upto Plinth a. Isolated (8%) ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-1 2023-24 Page No-111 It No-3 - Form Work and Centering (Apendix - Vol-1, Page No -111) ( % On Finished Rate of Concrete per Cum) Foundation, Sub structure of Cross drainages (5%) ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-1 2023-24 Page No-111 It No-9 - Form Work and Centering (Apendix - Vol-1, Page No -111) ( % On Finished Rate of Concrete per Cum) RCC Columns / Shaft (Slip Centering) (70%) ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-1 2023-24 Page No-111 It No-2 - Form Work and Centering (Apendix - Vol-1, Page No -111) ( % On Finished Rate of Concrete per Cum) Plinth Beams of Buildings (50%) ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

PWD Volume-1 2023-24 Page No-112 It No-11 - Form Work and Centering (Apendix - Vol-1, Page No -111) ( % On Finished Rate of Concrete per Cum) Earth Retaining Structures ( 10% ) ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.

Consultancy Charges - Preparation of detailed Architectural drawings,Structural design and drawings including Soil exploration as per I.S Codes and proof checking by IISC/NIT/IIT only as decided by the Department and the same has to be furnished to the Department for approval and also providing consultancy for Architectural & structural designs & Drawings and Elevations floor wise, preparation of internal and external Electrical works schematic drawings and working drawings for public health engineering ,fire fighting, HVAC, Lift Furnishing ,CCTV, networking system, UPS system, Nurse call system working drawings, interior layout etc and liaison with other department and approval of pollution control board & any other statutory approval from the concerned dept and drawings related to this project. (6 sets of as built drawings shall be submitted to the employer) Note - All required service GFC drawings required for completion of projects. - - - etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. ---- with all lead and lift and as per the directions of the Engineer-in-charge With all lead and lifts etc complete as per specification and as per the directions of Engineer in charge of the work.