Gulbarga Electricity Supply Company Limited Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 13,09,000Document Cost
Refer DocumentsTender Fee
₹ 7,500
Summary
A) Construction Of Sub Division Office Building At Bidar, Aurad (b)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
GESCOM/2024-25/BD/WORK_INDENT177Tender No
GESCOM/2024-25/BD/WORK_INDENT177Tender Authority
Gulbarga Electricity Supply Company Limited ViewPurchaser Address
-Website
http://https://gescom.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
code04 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications (Comman SR, Volume-1, Pg No. 7/ SI.No.1.10)
217.96
168
36617.28
... More
code05 - Providing and laying in position Cement Concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Comman SR, Volume-1, Pg No. 15/ SI. No.2.2.1)
1143.5
6601
7548643.725
... More
code06 - Formwork for Footings Isolated @ 8percentage (Comman SR, Volume-1, Pg No. 111/ SI. No.1a)
443.65
528
234291.565
... More
code07 - Providing and constructing Laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Foundation in CM 1:6. : (Comman SR, Volume-2, Pg No.9 / SI.No.5.5)
5.48
6692
36675.996
... More
code08 - Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto
1.5 m.(Comman SR, Volume-1, Pg No. 7/ SI. No.1.11)
2827.26
454
1285413.759
... More
code09 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 DesignMix Using 20 mm nominal size graded crushed coarse aggregates (Comman SR, Volume-1, Pg No. 16/ SI. No.2.4.2)
141.68
6639
940634.772
... More
code10 - Formwark for Columns @ 70percentage (Comman SR, Volume-1, Pg No. 111/ SI. No.9 )
108.24
4647
503034.576
... More
code11 - Formwark for Plinth beams of Buildings @ 50percentage (Comman SR, Volume-1, Pg No. 29/ SI. No.2)
33.44
3319
111006.4208
... More
code12 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Comman SR, Volume-1, Pg No. 16/ SI. No.2.5.1)
1039.8
6961
7238567.7
... More
code13 - Formwark for Columns @ 70percentage (Comman SR, Volume-1, Pg No. 111/ SI. No.7)
126.81
4873
617951.4705
... More
code14 - Formwark for Beams & Lintels of Building @ 60percentage (Comman SR, Volume-1, Pg No. 111/ SI. No.14)
218.84
4176
914072.796
... More
code15 - Formwark for Roof Slab of Building @ 50percentage (Comman SR, Volume-1, Pg No. 111/ SI. No.15 ))
472.28
3480
1643888.61
... More
code16 - Formwark for Chejjas, Canopy & Other Architectural projections of minor sections @ 45percentage (Comman SR, Volume-1, Pg No. 111/ SI. No.19 )
9.71
3132
30418.2257
... More
code17 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates (Comman SR, Volume-1, Pg No. 16/ SI. No.2.4.1)
51.72
6724
347775.624
... More
code18 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings (Comman SR, Volume-1, Pg No. 18/ SI. No.2.11a)
204.135
93929
19174369.92975
... More
code19 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(Comman SR, Volume-2, Pg No. 14/ SI. No.6.8)
329.36
8367
2755903.332
... More
code20 - Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (Comman SR, Volume-2, Pg No. 99/ SI. No.12.12)
2.496
130412
325508.6016
... More
code21 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (Comman SR, Volume-2, Pg No. 104/ SI. No.12.51)
117
1066
124815.6
... More
code22 - Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) (Comman SR, Volume-2, Pg No. 100/ SI. No.12.16)
56.4
7241
408440.34
... More
code23 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification -do- 30 mm thick Both side teak (Comman SR, Volume-2, Pg No. 105/ SI. No.12.57)
33.6
4245
142637.04
... More
code24 - Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge including cost of materials, labour, usage charges of machinery complete as per specifications. (Comman SR, Volume-2, Pg No. 86/ Item No.. No.11.31)
1645.92
120
198744.84
... More
code25 - Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size - 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (DSR 2024-25, Volume-2, Pg No. 108 / Item No.. No.12.84)
72.92
5274
384591.018
... More
code26 - Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the
Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent.(Comman SR, Volume-2, Pg No. 63/ SI. No.9.24)
3092.73
2994
9261489.258
... More
code27 - Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge.(Comman SR, Volume-2, Pg No. 85/ Item. No.11.30.1)
16.2
957
15513.12
... More
code28 - Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Comman SR, Volume-2, Pg No. 41/ SI. No.8.1.2)
1949.44
253
493305.792
... More
code29 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Comman SR, Volume-2, Pg No. 50/ SI. No.8.51)
8241.34
105
865340.7
... More
code30 - Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. (Comman SR, Volume-2, Pg No. 44/ SI. No.8.16a)
28.8
1299
37437.12
... More
code31 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Comman SR, Volume-2, Pg No. 42/ Item. No.8.8)
3720.28
389
1449235.074
... More
code32 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 sqm over an under coat of primer applied @ 0.80 L/10 sqm of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Comman SR, Volume-2, Pg No. 47/ SI. No.8.33.3)
374.65
145
54680.1675
... More
code33 - Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 sqm over an under coat of primer applied @0.75 L/10 sqm of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Comman SR, Volume-2, Pg No. 46/ SI. No.8.33.2)
29.24
144
4236.876
... More
code34 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Comman SR, Volume-2, Pg No. 46/ Item. No.8.30)
3720.28
182
679695.156
... More
code35 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 sqm over and including one coat of Special primer applied @ 0.75 L/10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50percentage @ 60 degree angle with 10 years life) (Comman SR, Volume-2, Pg No. 46/ SI. No.8.33.1)
1949.44
165
323412.096
... More
code36 - Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter (Comman SR, Volume-2, Pg No. 125/ SI. No.13.47)
136
206
28131.6
... More
code37 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.. (Comman SR, Volume-2, Pg No. 85/ SI. No.11.28)
3604
593
2138073
... More
code38 - Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resist ance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sand wiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accese ccessories, sealing shall be done with necessary rods etc., complete sories, sealing shall be done with necessary rods etc., complete. (Common SR 23-24 Item 10.15 Pg71 Vol-02)
364.25
4188
1525642.9125
... More
code39 - Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work (Comman SR, Volume-3, Pg No. 17/ SI. No 3.1.)
345.6
89
30844.8
... More
code40 - Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.(Comman SR, Volume-3, Pg No. 17/ SI. No 3.7 )
172.8
110
19051.2
... More
code41 - Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and
compacted to meet requirement of table No. 300-2 (Comman SR, Volume-3, Pg No. 17/ SI. No 3.6.)
885.6
517
458430.84
... More
code42 - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on
prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401. For Grading -I Material (Comman SR, Volume-3, Pg No. 23/ SI. No 4.2 .)
352.8
2478
874238.4
... More
code43 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (Comman SR, Volume-3, Pg No. 26/ SI. No.4.17)
295.2
2686
793187.64
... More
code44 - Plain Cement Pavement Quality Cum0 grade Concrete (RMC) with OPC & GGBS laid without Paver Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/Cum and GGBS@ 90 kg/Cum(75:25 proportion) as per approved mix design procedure and thickness as per design, over a prepared sub base. The superplastisiser confirming to IS 9103-1999 Reaffirmed-2008 ,Coarse aggregates and Fine aggregate confirming to IS:383-2016, transported to site, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work). Spreading the concrete with shovels, rackers and compacted using needle, suitable plate vibrator and finished in a continuous operation including provision of separation membrane and Hessian cloth finishing to lines and grades complete including cost of all materials, labour, all lead & lift, loading charges as per specification & direction of Engineer - incharge of the work. (Groove cutting shall be paid seperat (Comman SR, Volume-3, Pg No. 51/ SI. No.6.6)
438
7112
3115362.6
... More
code45 - Concealed Conduit System : Supplying heavy gauge PVC conduit pipe 19/20mm dia2.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary PWD Ele. SR 2023-24, Pg. No. 2, It No. 1.2.1
1000
69
69300
... More
code46 - Supplying heavy gauge PVC Conduit Pipe 19/20 dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.PWD Ele. SR 2023-24, Pg. No. 2, It No. 1.3.1
440
71
31416
... More
code47 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:confirming to latest amendments.PWD Ele. SR 2023-24, Pg. No. 6, It No. 2.3.3
3200
44
141120
... More
code48 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 Sqmm PWD Ele. SR 2023-24, Pg. No. 5, It No. 2.3.4
800
66
52920
... More
code49 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5 way PWD Ele. SR 2023-24, Pg. No. 8, It No. 3.4.3
60
185
11151
... More
code50 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module PWD Ele. SR 2023-24, Pg. No. 8, It No. 3.5.3
120
183
22050
... More
code51 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.PWD Ele. SR 2023-24, Pg. No. 9, It No. 3.6.1
640
107
68544
... More
code52 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket PWD Ele. SR 2023-24, Pg. No. 9, It No. 3.6.3
48
179
8618.4
... More
code53 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Regulator PWD Ele. SR 2023-24, Pg. No. 9, It No. 3.6.4
40
374
14994
... More
code54 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket PWD Ele. SR 2023-24, Pg. No. 9, It No. 3.6.10
40
247
9912
... More
code55 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP PWD Ele. SR 2023-24, Pg. No. 17, It No. 5.18.1
100
435
43575
... More
code56 - Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.PWD Ele. SR 2023-24, Pg. No. 28, It No. 5.18.7
8
1802
14423.2
... More
code57 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.50 x 50 x 6 mm PWD Ele. SR 2023-24, Pg. No. 20, It No. 5.41.2
12
414
4977
... More
code58 - Fabricating supplying and mounting MS box made out....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.PWD Ele. SR 2023-24, Pg. No. 20, It No. 5.42.2
4000
-
1800
... More
code59 - Earthing : Supplying fixing wiring earth electrod for grounding conduits IC cutouts and other equipments on the meter board using 40mm dia 2.90 thick GI pipe 2.5mtrs long burried in pit. Around the pipe to the complete depth the pipe shall have 16 nos of through holes of 12 mm dia PWD Ele. SR 2023-24, Pg. No. 54, It No. 12.56
8
3685
29484
... More
code60 - Supplying of 1.1 Kv LT UG cable XLPE or heat resistance PVC Insulated PVC Extruded inner sheath armoured UG LT csble as per IS-1554( part-1) escom. SR 2023-24, Pg. No. 13 , It No. 32.11
0.48
187921
90202.392
... More
code61 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model PWD Ele. SR 2023-24, Pg. No. 30, It No. 6.3.1
24
3133
75196.8
... More
code62 - Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.PWD Ele. SR 2023-24, Pg. No. 57, It No. 13.10
24
179
4309.2
... More
code63 - Supplying of 1X4-20/22 w feet -PVC Batten with integrated LED tube 18W with high quality diffuser with Life of 25000 burning hours & 70percentage lumen maintenance with CRI grater then 80. Power Input: 220-240V@ 50/60Hz & Power factor grater then0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition PWD Ele. SR 2023-24, Pg. No. 43, It No. 11.3.2
100
724
72450
... More
code64 - Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA.On wall/ ceiling / Rafter / Girders PWD Ele. SR 2023-24, Pg. No. 56, It No. 13.7.1
100
128
12810
... More
code65 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70percentage, CCT grater then 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire grater then IK08. Power Factor grater then0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiencygrater then 1301m/w, nominal CRI grater then75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against anymanufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.LED Floodlight 70W PWD Ele. SR 2023-24, Pg. No. 46, It No. 11.9.1
12
7106
85276.8
... More
code66 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete (Comman SR, Volume-2, Pg No. 60/ SI. No.9.9)
145.3
1129
164159.94
... More
code67 - Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications(Comman SR, Volume-2, Pg No. 65/ SI. No.9.39)
293.04
1521
445845.708
... More
code68 - Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 m2 (Comman SR, Volume-2, Pg No. 69/ SI. No.10.1.2)
3.6
4133
14881.86
... More
code69 - Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Comman SR, Volume-2, Pg No. 131/ SI. No.14.1.1)
18
5128
92307.6
... More
code70 - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever
required :W.C. pan with ISI marked black solid plastic seat and lid (Comman SR, Volume-2, Pg No. 131/ Item. No.14.2.2)
4
5076
20307
... More
code71 - Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete (Comman SR, Volume-2, Pg No. 127/ SI. No.13.59)
70
231
16170
... More
code72 - Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backingOval shape 450x350 mm (outer dimensions) :(Comman SR, Volume-2, Pg No. 136/ Item. No.14.32)
12
1119
13431.6
... More
code73 - 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g:(Comman SR, Volume-2, Pg No. 137/ SI. No.14.40.2)
29
520
15103.2
... More
code74 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Comman SR, Volume-2, Pg No. 123/ SI. No.13.34)
11500
9
108675
... More
code75 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore (Comman SR, Volume-2, Pg No. 117/ SI. No.13.4.2)
18
627
11302.2
... More
code76 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia Pipes (Comman SR, Volume-2, Pg No. 122/ SI. No.13.33.4)
195
390
76167
... More
code77 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes (Comman SR, Volume-2, Pg No. 122/ SI. No.13.33.3)
110
310
34188
... More
code78 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes (Comman SR, Volume-2, Pg No. 122/ SI. No.13.33.2)
80
227
18228
... More
code79 - Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy (Comman SR, Volume-2, Pg No. 139/ SI. No.14.55a)
20
1172
23457
... More
code80 - Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (Comman SR, Volume-2, Pg No. 133/ Item. No.14.7A)
8
4327
34616.4
... More
code81 - Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth (Comman SR, Volume-1, Pg No. 6/ SI. No.1.5.1)
59.4
313
18648.63
... More
code82 - Providing and fixing Unplasticised Polyvinyl Chloride (UPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 100 mm nominal dia Pipes (Comman SR, Volume-2, Pg No. 125/ SI. No.13.50.9)
240
976
234360
... More
code83 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal dia Pipes (Comman SR, Volume-2, Pg No. 123/ SI. No.13.33.6)
150
757
113557.5
... More
code84 - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500 mm x 700mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3. (Comman SR, Volume-2, Pg No. 126/ SI. No.13.54)
16
6591
105470.4
... More
code85 - Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15percentage, b) Above 30 M - 30percentage (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield tes(Comman SR, Volume-5, Pg No. 139 SI. No. 12.4)
9
5552
49971.6
... More
code86 - Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: (Above 300m of drilling add 10percentage for every 50m depth Comman SR, Volume-5, Pg No. 139/ SI. No. 12.2.1) Borewell depth of 0Mts to 50 Mtrs
450
324
146002.5
... More
code87 - Borewell depth of 50 to 100 Mtrs
450
406
182857.5
... More
code88 - Borewell depth of 100 to 150 Mtr
450
432
194670
... More
code89 - Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty (Comman SR, Volume-5, Pg No. 143/ SI. No.12.32)
170
2029
345040.5
... More
code90 - Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. For 3 HP etc. complete.(Comman SR, Volume-5, Pg No. 151/ SI. No.13.11.1)
4
24326
97305.6
... More
code91 - Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter etc. complete (Comman SR, Volume-5, Pg No. 154/ SI. No.13.23.1)
9
6825
61425
... More
code92 - Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work.. (Comman SR, Volume-5, Pg No. 156/ SI. No.13.32)
9
6825
61425
... More
code93 - Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN6.0, 75mm dia (Comman SR, Volume-2, Pg No.95/ SI. No.9.1.2)
1250
257
321562.5
... More
code94 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments (Comman SR, Volume-5, Pg No. 154/ item. No.13.22.3)
1640
141
232470
... More
code95 - Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Comman SR, Volume-5, Pg No. 154/ SI. No.13.25.1)
4
1312
5250
... More
code96 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT NO. 2.1.2, PNO.15)
424.21
5947
2522861.712
... More
code97 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT NO. 2.1.6, PNO.15)
30.84
6555
202160.826
... More
code98 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.4.3, Pg.16)
77.76
6652
517321.728
... More
code99 - Formwork for Foundation 8percentage of finised rate of concrete
77.76
532
41385.4272
... More
code100 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16)
45.04
7185
323619.156
... More
code101 - Formwork for Columns & piers 70percentage of finished rate of concrete
19.36
5029
97373.056
... More
code102 - Formwork for Beams & Lintels 50percentage of finised rate of concrete
25.68
3592
92257.1976
... More
code103 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m..(PWD DSR 2023-2024 IT NO. 1.9, PNO. 7)
409.6
279
114401.28
... More
code104 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.. (PWD DSR 2023-2024 It. No. 11.25.2, P. No.84)
13156
142
1878676.8
... More
code105 - supplying and Placing in position Main table of the following specifications of Make GODREJ/FEATHERLITE/EQUIVALENT.Its size shall be 1650mm Width x 900mm Depth x 740mm Height .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading
19
31486
598234
... More
code106 - Supplying and placing in position ERU of the following specifications of Make GODREJ/FEATHERLITE/EQUIVALENT.Its size shall be 1550 Width x 450 Depth x 705 Height.The top of ERU shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.
9
18210
163890
... More
code107 - Supplying and placing in position Back unit of the following specifications of Make GODREJ/FEATHERLITE/EQUIVALENT with size of 1280 Width x 425 Depth x 705 Height. Top of HDU shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.
29
31482
912978
... More
code108 - Supplying and placing in position Free Standing Pedestal with Castors of the following specifications of Make GODREJ/FEATHERLITE/EQUIVALENT with Overall Dimensions shall be 390mm(W)x440mm(D)x646mm(H). The construction & Material used shall be welded assembled , 0.8 mm thick CRCA for body shell , drawer front & tray , front side stiffener ,rear aide stiffener and 1.2 mm thick CRCA Top stiffener & Bottom stoffener . The drawer fronts shall be metal front straight edge . Locking shall be 10 lever cam lock & Central RH locking with actuator & lock channel mechanism for box box-file Pedest. The top panel shall be metal straight edge top . Castor should be swiveling non - lockable castors mounted below the body shell for free standing full height mobile pedestal and M8 Leveling stud for free standing pedestal . The anti-tipping mechanism shall have fifth roller arrangement mounted below file drawer to avoid toppling of unit when file drawer is pulled out . Partition in drawer shall be 1 no. Partition in box drawers with lock mounted . Plastic pencil tray shall be optional accessory . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Application shall be suitable for pushing below work surface which has got a clear height of 725 mm from below . For drawer pulling side wise tapered recess provided in shell behind drawer fronts .
47
15046
707162
... More
code109 - Providing, supplying and placing of Mid Back Chair of Make GODREJ/FEATHERLITE/EQUIVALENT. a) SEAT/BACK ASSEMBLY: The seat is made up of 1.5 plus or minus0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area. The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 plus or minus0.1 cm. The chair seat & back size are *SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H) HIGH RESILIENCE (HR)
b) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45plus or minus2 kg/cum and hardness 16plus or minus2 kgf as per IS:7888 for 25percentage compression. ARMRESTS :The adjustable armrest is designed with the following features : Up-Down adjustment- 6 steps (7.2 plus or minus 0.5cm range) Armrest top is mounted on Armrest structure made of glass filled Nylon Armrest Top is PU moulded over glass filled Nylon insert. c) CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism isdesigned with the following features: 360 revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 plus or minus 0.3cm. d) PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel castors. The pedestal is 66.1 plus or minus0.5cm. pitch-center dia.(76.1 plus or minus1.0cm with castors). e) TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. f) WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 101.5 - 111.0 CM. SEAT HEIGHT (SH): 44.5 - 54.0 CM. This product should be certified by Indoor Advantage GOLD, GREENGUARD GOLD, BIFMA Level 2 & GREEN PRO
42
11040
463680
... More
code110 - Providing & placing in position office table without CPU hanger of Make GODREJ/FEATHERLITE/EQUIVALENT. with overall size shall be 1200 Width mm x 600 Depth mm x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) .
28
23265
651420
... More
code111 - Providing, supplying and placing of waiting chair of 3-seater with 2 arms of Make GODREJ/FEATHERLITE/ EQUIVALENT .SEAT/BACK SHELL: It is powder-coated shell made from cold rolled M.S. sheet 0.12 plus or minus 0.013 cm thickness with circular perforations.The Side Bar is made of cold rolled M.S.sheet 0.12 plus or minus 0.013 cm thickness. The Shell is assembled on the Cross Beam with help of M8 Bolts.
SEAT SIZE : 50.0 cm (W) x 45.5 cm (D) BACK SIZE : 50.0 cm (W) x 56.0 cm (H)
CROSS BEAM: It is made up of cold rolled steel with 0.2 plus or minus 0.02 cm thickness. The crossbeam is powder coated. It is covered with plastic end caps
LEG: It is made up of cold rolled steel with 0.12 plus or minus 0.013 cm thickness. It is powder coated. The legs are fitted with leveller cups covered with SS304 sheet. ARMREST: It is made of SS304 round tube of theta 3.175 plus or minus 0.03cm x 0.12 plus or minus 0.013 cm thick formed to make an oblong shape.
WIDTH (W): 173.5 CM.
DEPTH (D): 74.0 CM.
HEIGHT (H): 91.0 CM
SEAT HEIGHT (SH): 44.0 CM.
This product should be certified by GREENGUARD GOLD.
29
34200
991800
... More
code112 - Providing, supplying and placing of Visitor Chair of Make GODREJ/FEATHERLITE/EQUIVALENT. SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 plus or minus0.1cm. thick hot-pressedplywood measured upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contouredlumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort topopliteal area.
MID BACK SIZE 47.5 cm. (W) x 58.0 cm. (H). SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D)
HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded withdensity = 45plus or minus2 kg/Cum and hardness load 16 plus or minus 2 kgf as per IS:7888 for 25percentage compression.
ARMRESTS :The one-piece armrests are injection moulded from black Co-polymer Polypropylene.
TUBULAR FRAME : The powder coated ( DFT 40-60 microns ) tubular frame iscantilever type & made of theta 2.54 plus or minus0.03cm. x 0.2 plus or minus0.016cm.thk. M.S. ER.W. Tube. Overall Dimensions of Chair
WIDTH (W): 61.4 CM. DEPTH (D): 64.5 CM. HEIGHT (H): 89.5 CM.
SEAT HEIGHT (SH): 46.5 CM.
This product should be certified by Indoor Advantage GOLD & GREEN PRO.
139
8845
1229455
... More
code113 - Providing, supplying and placing of Computer Table of Make GODREJ/FEATHERLITE/EQUIVALENT. Table Top: 35 Kg. Shelf:15 Kg. Drawer: 5.0 Kg.
Overall Size (Width X Depth X Height): (+/-2) mm Length: 1200 mmWidth:600 mm Height: 750 mm Number of Cartons:1 Carton Specs:5 ply, 150 gsm, 16 BS.
Carton Size (each Carton): L x W x H ( Carton 1 of 1) 1240 mm x 710 mm x 80 mm Raw Material (specs of laminations & thickness): Pre-laminated particle board 18 mm [NOVOPAN BOARDS] Metal Parts: (Material & Coating details) SLIDE MOUNTING DRAWER SLIDE [BLACK POWDER COATING] Hardware: (Details) MINIFIX SET,CASTOR ,FASTNERS,WIRE MANAGER,UNIVERSAL LOCK Construction: Knock down fitting.
14
12948
181272
... More
code114 - RECTA WORKSTATIONS - 1200 x 600 Providing and placing "UPBEAT"desk based modular workstation with System ht - 1200mm. PARTIAL SCREENS: Fabric T- mould, 19mm thk Screen of 450mm ht.,mounted on studs
LEGS: Providing metal powder coated Dfine Plus leg. Legs are for standard workstation height of 750mm. UNDERSTRUCTURE: Comprising of metal powder coated cross connectors between legs and legs. Made up of metal powder coated finish and the entire assemply is fixed to the worktop.
WIRE MANAGEMENT: For 750 high workstations- For vertical wiremenagement,Shared legs / wire risers with cover are considere. For horizontal wiremanagement - Wire Tray with integrated power box.Access flap will be provided. Switch plate of (8+3Anchor Roma) module is considered for Power and Data points. WORKSURFACE - Out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d.Extended worktop unit is provided at the termination and it will have a back to back worktop with added length of 600 mm over the regular workstation length.
MODESTY : Wooden modesty: Wooden modesty is made from 18 mm thick PLT with 2 mm PVC lipping on all edges.Metal modesty: Lazer cut perforated Metal modesty
Metal and wooden modesty are mounted on the worktop with the help of the modesty mounting brackets Modesty terminates at 400 mm from ground.
a.Pedestals with or without legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. b.CPU trolley - with castors
c.KBPT with/without mousetray - Metal
53
27927
1480162.8
... More
code115 - Providing Steel Almirah of Godrej or any other Equivalent make of size 198.1Cm X 91.6CM X48.6CM having with four adjustable shelves with a 3-way bolting device and a six lever lock for maximum securitySpecified with GRIHA and GREEN GUARD
40
29000
1160000
... More
code116 - Providing & injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20percentage E.C. / Lindane 20percentage E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.(SR 2023-24 Item No.4.1,Pg No-5 Vol-02)
2430
123
301077
... More
code117 - 1.23 Providing & Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering,including cost of all materials and labour with all lead & lift complete as per specifications.( SR Vol-1 Item no-1.23 Pg 11 )
1887.3
2816
5314825.53
... More
code118 - Centering,shuttering for RCC Columns and Pedestal 70percentage Upto Plinth level (Rate=6601.35 X 70percentage)
81.2
4620
375221.14
... More
code119 - Centering and shuttering for ground beam & plinth beam 50percentage (Rate=6601.35 X 50percentage)
501.45
3300
1655125.986
... More
code120 - Centering and shuttering for Vertical wall of Drain Septic sump 35percentage (Rate=6601.35 X 35percentage)
46.2
2310
106743.714
... More
code121 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage harges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(Common SR 23-24 Item No6.1, Pg No 13 Vol-02)
972.7
8631
8395373.7
... More
code122 - Providing Half brick masonry with common burnt clay Non Modular bricksof class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1cement : 4 coarse sand) including cost of all materials, labour, scaffoldingand usage charges of machinery & other incidental charges complete asper the direction of engineer incharge of work.(Common SR 23-24 Item- 6.13,Pg No 14 Vol-02)
649.7
1024
665812.56
... More
code123 - Providing and fixing suitable plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 150mm wide (Common SR 2023-24 Item No. 8.16.2, Page No. 43 Vol-02)
1202.3
39
47971.77
... More
code124 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Pg-41 item-8.1.1 vol-II
6291.9
267
1684656.225
... More
code125 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Common SR 2023-24 Item 8.2.1, Page 41 Vol-02) For External Plastering
7167.95
309
2220272.5125
... More
code126 - Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Common SR 2023-24 Item No. 8.27, Page No. 45 Vol-02)
6575.65
55
365934.9225
... More
code127 - Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. (Common SR 2023-24 Item No. 8.54.2, Page No. 50 Vol-02)
6291.9
115
726714.45
... More
code128 - Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Common SR 2023-24 Item No. 8.31, Page 46 Vol-02)
8761.85
186
1637589.765
... More
code129 - Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge. (Common SR 2023-24 Item No. 8.55.1, Page No. 50 Vol-02)
713.95
58
41980.26
... More
code130 - Painting with synthetic enamel paint of approved brand & manufacture to give an even shade :2 coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops & foreign matter including preparing the surface even & sand paper smooth,cost of materials,labour complete as per specifications & as per directions of Engineer-in-charge. (Common SR 2023-24 Item 8.40,Pg48 Vol-02)
713.95
120
86209.4625
... More
code131 - Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.(Common SR 2023-24 Item No. 10.2,Page-69 Vol-02)
978.85
344
337115.94
... More
code132 - Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. (Common SR 2023-24 Item No. 9.10, Page No. 60 Vol-02)
764.4
1161
887697.72
... More
code133 - Providing Honne wood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (Common SR 2023-24 Item No. 12.11, Page No. 100 Vol-02) Cellar floor
15.55
144977
2254403.235
... More
code134 - Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. Size 62 x 125mm (Fixtures shall be paid for separately) (Common SR 2023-24 Item -12.93.2, Pg-111 Vol-02) Ground floor
166.5
802
133566.3
... More
code135 - Providing and fixing factory made Green certified, Anti Termite, UV resistant,high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) Size 30mm thick (Common SR 2023-24 Item No. 12.94.1, Page No. 112 Vol-02)
43.9
3659
160641.075
... More
code136 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick both side Teak ( excluding cost of fixtures ) (Common SR 2023-24 Item No. 12.57.4, Page No. 105 Vol-02)
25
4758
118965
... More
code137 - Providing and fixing plain rolled glass 4mm thick with teakwood beading of 10mm thick (Common SR 2023-24 Item No. 20.107, Page No. 207 Vol-02)
18.15
1204
21858.9525
... More
code138 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge (Common SR 2023-24 Item No. 20.107, Page No. 218 Vol-02) SS Handles 300mm BR 550
180
550
99000
... More
code139 - SS Aldrop 16mm dia, 300mm BR 375
100
375
37500
... More
code140 - SS Tower Bolts 250x10mm BR=200
100
200
20000
... More
code141 - SS hinges 125 mm BR-50
400
50
20000
... More
code142 - SS Door stopper 75mm.BR=100
75
100
7500
... More
code143 - Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(Common SR 2023-24 Item No. 12.59, Page No. 105 Vol-02)
45
1169
52636.5
... More
code144 - Providing & fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (SR 23-24 Item 11.34A,Pg-86 Vol-02)
6907.95
176
1218562.38
... More
code145 - Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (Common SR 2023-24 Item No. 12.90, Page No. 110 Vol-02)
308.25
7070
2179543.275
... More
code146 - Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated Storm water drain and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (Common SR 2023-24 Item No. 12.85, Page No. 109 Vol-02)
10.8
6004
64853.46
... More
code147 - Providing & fixing Vertical Blinds of reputed make of shape 100mm regular fabric with powder coated aluminium channel, telting with PVC Chain system with all necessary fittings and fixtures as per direction of Engineer in charge (Common SR 2023-24 Item No. 22.23, Page No. 219 Vol-02)
358.35
892
319827.375
... More
code148 - Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (Common SR 23-24 Item 15.1, Pg 148 Vol-02)
67.3
857
57733.305
... More
code149 - UG Sump Tanks Providing & Applying Crystalline waterproofing slurry coat RCC structure like Retaining wall, Underground tank. The material having chemical resistance properties, seals shrinkage cracks up to 0.4 mm width, capable of preventing water dampness & seepages, Water permeability is Nil confirms to BS EN 12390 Part 8: 2000. Powder to water mixed at a ratio (5:2) 5 parts powder and 2 parts water, applied @ 1.5kg/m2 in 2 coats to achieve 1.0mm DFT on a cleaned surface free from all loose materials etc., complete. The finished cost to include surface preparation completely as per specification. (Common SR 2023-24 Item No. 15.23, Page No. 155 Vol-02)
297.5
2572
765318.75
... More
code150 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.(PWD Common S.R 2023-24, Vol-2, P.No.88, Item No.11..35.2 )
877.75
599
526255.0125
... More
code151 - Providing & fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters & partition frames with C.P. brass/stainless steel screws etc. complete as per architectural drawings & directions of engineer- in-charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications & as per directions of the Engineer-in-Charge. PWD S.R 2023-24,Vol-2, P.No.89, Item No.11.36.2
208.5
1032
215203.275
... More
code152 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ sqm) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD Common S.R 2023-24, Vol-2, P.No.89, Item No.11..37.1 ) Ground floor
208.5
1037
216297.9
... More
code153 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. (Common SR 2023-24 Item No. 11.5.1, Page No. 77 Vol-02) Terrace floor
12.6
4701
59243.94
... More
code154 - Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Common SR 23-24 Item 8.29 Pg 45 Vol-02)
57.3
297
17026.695
... More
code155 - Providing and supplying aluminium extruded tubular and other alu minium sections as per the architectural drawings and approved draw ings of Chief Architect, GoK.The aluminium quality shall be as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminium extruded section shall be taken for purpose of payment.(PWD Common S.R 2023-24, Vol-2, P.No.181, Item No.18.1 ) Ground floor
162
427
69230.7
... More
code156 - Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface Hash 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.18.2)For payment, only the actual area of glass on face Hash 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in m2.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face Hash 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 percentage, Light reflection internal 10 to 15percentage, light reflection external 10 to 20 percentage, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.(PWD Common S.R 2023-24, Vol-2, Pg.No.183, Item No.18.3 )
36
3195
115025.4
... More
code157 - Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per m2 including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings & as directed by Engineer-in-Charge.(PWD Common S.R2023-24, Vol-2, P.No.28, Item No.7.41)GF
345
1777
613289.25
... More
code158 - Providing and fixing in wall lining flat pressed three layer (medium den sity) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete.(PWD Common S.R 2023-24, Vol-2, P.No.70, Item No.10.1) Size 12mm thick
337.5
1164
393001.875
... More
code159 - Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture (PWD common S.R 2023-24, Vol-2, P.No.70, Item No.10.11 ) FF
337.5
1554
524475
... More
code160 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.(Common SR 2023-24 Item No. 9.25, Page No. 63 Vol-02)
570
840
478800
... More
code161 - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 600 x 300 x 150 mm size (Common SR 2023-24 Item No. 8.42.3, Page No. 73 Vol-03)
259.69
486
126248.2935
... More
code162 - Concealed Conduit System:Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary( P no 2 item no 1.2.1,1.2.2,1.2.3) 19/20 mm dia 2 mm thick
405
66
26730
... More
code163 - Concealed Conduit System:Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary( P no 2 item no 1.2.1,1.2.2,1.2.3) 25 mm dia 2 mm thick
250
78
19500
... More
code164 - Concealed Conduit System:Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary( P no 2 item no 1.2.1,1.2.2,1.2.3) 32 mm dia 2.5 mm thick
250
103
25750
... More
code165 - Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.(P No 2 Item no 1.4.1 ,1.4.2,) 75 x 75 x 65 mm
100
106
10600
... More
code166 - Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.(P No 2 Item no 1.4.1 ,1.4.2,) 100 x 75 x 65 mm
25
118
2950
... More
code167 - Supplying & fixing PVC/metal conduit Deep junction box (Pg 2/3 Item No 1.5.1,1.5.2,) 19/20 mm deep Junction box
50
49
2450
... More
code168 - Supplying & fixing PVC/metal conduit Deep junction box (Pg 2/3 Item No 1.5.1,1.5.2,) 25 mm deep Junction box
50
56
2800
... More
code169 - Supplying & fixing PVC/metal conduit Deep junction box (Pg 2/3 Item No 1.5.1,1.5.2,) 32 mm deep Junction box
50
61
3050
... More
code170 - Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete (Pno 3 Item No 1.7.1/1.7.2 upto 50 mm conduit in brick wall
500
29
14500
... More
code171 - Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete (Pno 3 Item No 1.7.1/1.7.2upto 50 mm conduit in CC floor
250
69
17250
... More
code172 - supplying & fixing MS fan box with round Hook(Pg 4 Item 1.13)
100
117
11700
... More
code173 - Supply & laying of under floor junction boxes shall be of three-piece construction - Base box, frame and load plate. Base box shall be robust in its construction manufactured from 1.5 mm thick zero spangle pre- galvanized sheet steel with 275 GSM ( 36.67 microns) coating mass. The load plate and frame thicknesses shall be 3 mm and 2 mm respectively to provide adequate load bearing capacity of 5 kN with deflection not greater than 6mm while loading and permanent deflection not exceeding 3 mm as per EN 50085-2-2. The trap and frame shall be Epoxy coated to protect from corrosion. The junction boxes shall be 10 mm or 20 mm recess to accommodate floor covering suitable for Tile/Carpet/marble / granite/ according to site conditions. The junction box has height of 60mm up to finished floor level. The base of junction boxes should have pre-punched sealing arrangements on all four sides to accept either 25 mm or 38 mm of metal raceways.(Pno 4 Item no 1.15.1) For (50-100x38mm) duct.Dim:172x172x60mm. 10 mm Recess
10
1736
17360
... More
code174 - supplying and wiring adopting loop system in existing PVC conduit /casing caping using 2x1.5 sq mm ( phase & nuetral ) 1x1.0 sq mm ( Earth wire ) FRLS multi strand PVC isulated copper wire ( confirming to IS 694 and latest amendments ) without control switch shall be fixed on the existing plastick sheet /gang box the other end of the wires shall be terminated with sufficiant loose length in awood/PVC round block complete for each outlet ( Pno 5 Item no 2.2.1, 2.2.2, 2.2.3, 2.2.4) Short point upto 3Mtr from tapping point to out let via switch box (
200
269
53800
... More
code175 - Medium point above 3Mtr upto 6Mt from tapping point to outlet via switch box
100
379
37900
... More
code176 - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box
75
555
41625
... More
code177 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694-2010 ( Pno 5 Item No 2.3.2 to 2.3.5) 1.5 sq mm
875
26
22750
... More
code178 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694-2010 ( Pno 5 Item No 2.3.2 to 2.3.5)2.5 sq mm
1750
42
73500
... More
code179 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694-2010 ( Pno 5 Item No 2.3.2 to 2.3.5) 4 sq mm
1000
63
63000
... More
code180 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694-2010 ( Pno 5 Item No 2.3.2 to 2.3.5) 6 sq mm
250
92
23000
... More
code181 - Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854 (Pno 8 Item no 3.1.1) 6 Amps 2 way
250
128
32000
... More
code182 - Supplying and fixing Powder coated/galvanised metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, including necessary rawl plugs,Machine/NF screws etc., complete.(Pno 8 ) 1 to 2 way Item no-3.4.1
25
138
3450
... More
code183 - Supplying and fixing Powder coated/galvanised metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, including necessary rawl plugs,Machine/NF screws etc.,4 to 5 way Item no-3.4.3
25
177
4425
... More
code184 - Supplying and fixing Powder coated/galvanised metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, including necessary rawl plugs,Machine/NF screws etc., 6 way Item no-3.4.4
25
220
5500
... More
code185 - Supplying and fixing Powder coated/galvanised metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, including necessary rawl plugs,Machine/NF screws etc., 10 -12 way Item no-3.4.6
40
319
12760
... More
code186 - Supplying and fixing Powder coated/galvanised metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, including necessary rawl plugs,Machine/NF screws etc., 18 way Item no-3.4.8
10
405
4050
... More
code187 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the( P no 8 1 to 2 Module Item no 3.5.1
25
137
3425
... More
code188 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the( P no 84 module Item no 3.5.3
25
161
4025
... More
code189 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the( P no 8 6 module Item no 3.5.4
25
234
5850
... More
code190 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the( P no 8 10-12 module Item no 3.5.6
40
344
13760
... More
code191 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the( P no 8 18 module Item no 3.5.8
10
457
4570
... More
code192 - Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) 6A one way switch Item no-3.6.1
350
102
35700
... More
code193 - Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) 6 A two way switch Item no-3.6.2
25
166
4150
... More
code194 - Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) 6 A three way socket Item no-3.6.3
225
171
38475
... More
code195 - Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) steped fan regulater Two module Item no-3.6.4
125
357
44625
... More
code196 - Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) 16 A one way switch Item no-3.6.7
30
180
5400
... More
code197 - Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) 6 A bell push Item no-3.6.8
25
177
4425
... More
code198 - Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) 32 A DP Switch Item no-3.6.9
30
326
9780
... More
code199 - Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) 6/16 universal socket Item no-3.6.10
25
236
5900
... More
code200 - Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) TV/telephone socket Item no-3.6.11
60
156
9360
... More
code201 - Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) RJ 45/1.0 outlet cat 6 Item no-3.6.12
25
337
8425
... More
code202 - Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.)( Pno 10 Item No 3.14.5/3.14.6/3.14.7/3.14.8) 6A Bakelite ceiling rose Item-3.14.5
125
78
9750
... More
code203 - upplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.)( Pno 10 Item No 3.14.5/3.14.6/3.14.7/3.14.8) 6A Pendent holder Item-3.14.6
100
71
7100
... More
code204 - upplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.)( Pno 10 Item No 3.14.5/3.14.6/3.14.7/3.14.8) 6A Batten holder Item-3.14.7
150
74
11100
... More
code205 - upplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.)( Pno 10 Item No 3.14.5/3.14.6/3.14.7/3.14.8) 6A Bell buzzer Item-3.14.9
25
130
3250
... More
code206 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2. (Icu=100percentage lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechnism FOUR POLE 160 A 25 KA( Pno 16&17 Item No 5.15.11) (
5
13447
67235
... More
code207 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required ( PNo 17 Item No 5.18.1/5.18.4/5.18.7/5.18.8) 6 to 32 A SP MCB Item No-5.18.1
25
415
10375
... More
code208 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required ( PNo 17 Item No 5.18.1/5.18.4/5.18.7/5.18.8) 6 to 32 a DP MCB Item No-5.18.4
25
739
18475
... More
code209 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required ( PNo 17 Item No 5.18.1/5.18.4/5.18.7/5.18.8) 6 to 32 A TPN Item No-5.18.7
25
1717
42925
... More
code210 - Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS encloser (Pno 18 Item No 5.19.9/5.19.11) 12 way SP& N double door
20
2329
46580
... More
code211 - Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS encloser (Pno 18 Item No 5.19.9/5.19.11) 4 way TP&N double door
10
4038
40380
... More
code212 - Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail /flush mounting on panel board ( P no 18 iTEM No 5.21)
5
9255
46275
... More
code213 - Supplying, fixing and wiring rotary selector switch suitable for fvoltmeter ( Pno 19 Item no 5.28
5
160
800
... More
code214 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C confirming IEC 60898 ( Pno 19 Item no 5.38
10
515
5150
... More
code215 - Supplying 100 A 4X 30X 6mm allimiuim strips rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per ISspecification with necessary bolts, nuts and washers etc., complete( Pno 20 Item No 5.40.1)
5
2465
12325
... More
code216 - Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete..(Pno 20 Item No 5.42.2)
25000
-
10750
... More
code217 - Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300 mm)P-30 Item 6.2.1
25
2969
74225
... More
code218 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 & with double ball bearing system ( Pno 30 Iten No 6.3.1)48" Sweep (1200 mm) Regular model
125
2984
373000
... More
code219 - Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply.(Pno-30 Item no-6.5.2)400 mm Sweep
25
3212
80300
... More
code220 - Supplying of .. TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R410A / R-32 refrigerant fan motor, start & run capacitors, relay & over load protector internal unit, with one indoor & one outdoor unit The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube. suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless removet unit ( Pno 31 Item No 6.8.6) 5Star CAPACITY 2.0 ton
5
67399
336995
... More
code221 - Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C ( Pno 32 Item No 6.12)
5
3175
15875
... More
code222 - Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression,operating at 00 C to 400 C. Range etc., complete. 3KVA capacity ( Pno 38 Item No 9.1.1) Qty same as Ac;s
5
3995
19975
... More
code223 - Supplying and drawing UTP-CAT 6E LAN cable. (Pg no-36, Item no8.1)
500
38
19000
... More
code224 - Supplying and drawing PVC flexible one pair telephone narmoured tinned copper cable 20 piar ( Pno 36 Item No 8.2.7)
125
150
18750
... More
code225 - Supplying & Fixing of switch mounting rack with power manager & cable manager 4U with 450 mm depth ( P no 36 Item No 8.4.1
5
4892
24460
... More
code226 - supplying & fixing of 1/0 socket with box ) Pno 36 Item 8.10.1
25
490
12250
... More
code227 - 1.1 KV XLPE heat resistent PVC insulated inner sheet armoured LTUG cable as per IS -1554 ( part 1or IS 7038 part-1 armouring strip thickness and resistivity as per IS 3975 70 sq mm 3.5 core 18 GI strip -4x0.8 mm ( Page 9 Iten No 223/18.13) ESCOM SR
0.5
317912
158956
... More
code228 - Supplying,erecting,testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete Excluding batteries and wiring complete.3 kVA OFF LINE UPS (pg no-38 Item no-9.2.4
5
29142
145710
... More
code229 - Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries (pg no-38 Item no-9.5.10.For 200AH capacity Qty as UPS
5
20668
103340
... More
code230 - supplying ... feet PVC batten with integrated LED tube ... W with high quality diffuser with Life of 25000 burning hours & 70percentage lumen maintenance with CRI grater then 80. Power Input: 220- 240V@ 50/60Hz & Power factor grater then0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 20/22 1x4" -20/22 W (Pno 43 Item no 11.3.2)
250
690
172500
... More
code231 - Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70percentage lumen maintenance with CRI grater then 80. Power Input: 220-240V @50/60Hz & Power factor grater then0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LES squire /round down light 15-18 W ( Pno 44 Item no 11.5.3)
50
1324
66200
... More
code232 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70percentage, maximum light intensity should be between 60 degrees to 70 degrees. CCT grater then 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire grater then IK08. Power Factor grater then0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiencygrater then1301m/w, nominal CRI grater then75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/ Nichia/ Lumileds/Osram make LED Source.LED Streetlight 25W (46/46 Item 11.8.1
20
2425
48500
... More
code233 - Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring complete (Pg no 57 Item13.10
150
171
25650
... More
code234 - Supplying and Fixing ofUsing 32mm dia G.I.Pip mm dia class A GI pipe bracket upto 2ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires.( Pno 56 Item No 13.1.2)
20
1045
20900
... More
code235 - Supplying,fixing & wiring 3-Phase Digital Ammeter/voltmeter (P No 19 Item No 5.29)
5
1425
7125
... More
code236 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia (Pg no-54,item no-12.56)
20
3510
70200
... More
code237 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing & technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m (Common SR 2023-24 Item No. 1.6.1 Page No.6 Vol-01)
47.7
508
24241.14
... More
code238 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25 mm nominal dia pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (Common SR 2023-24 Item No. 13.32.3, Page No. 122 Vol-02)
200
500
100170
... More
code239 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20 mm nominal dia pipes, having thermal stability for hot & cold water supply, including all CPVC lain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (Common SR 2023-24 Item No. 13.32.2, Page No. 122 Vol-02)
50
397
19897.5
... More
code240 - Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 Common SR 2023-24 Item No. 13.12, Page No. 119 Vol-02)
50
666
33337.5
... More
code241 - Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.Item no-13.37 Pg no-123
60
328
19719
... More
code242 - Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 100mm x 100mm size P type with Non Modular common burnt clay bricks of designation 3.5& water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design (Common SR 23-24 Item 13.38, Page No. 123 Vol-02)
25
2658
66465
... More
code243 - Constructing brick masonry chamber for underground C.I. inspection chamber & bends with bricks in CM 1:4 (1cem: 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions,total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg & weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cem :1.5 fine sand :3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1cem:5 fine sand:10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with CM 1:3 (1cem:3 coarse sand), finished smooth with a floating coat of neat cement on walls & bed concrete etc.complete as per standrd design: Inside dimensns 455x610 mm & 45 cm deep for single pipe line :With common burnt clay (non modular) bricks of class desgntn 3.5.SR 23-24 Item13.53, P 126 Vol-2
35
5924
207343.5
... More
code244 - Providing & fixing PVC (S.W.R) S Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete (Common SR 2023-24 Item 13.62, Page-127 Vol-02)
25
375
9397.5
... More
code245 - Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete (Common SR 2023-24 Item No. 13.63, Page No. 128 Vol-02)
15
256
3843
... More
code246 - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid(Common SR 2023-24 Item No. 14.2.1, Pg No.131 Vol-02)
15
5079
76198.5
... More
code247 - Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern(Common SR 2023-24 Item No. 14.5.1, Page No. 132 Vol-02)
15
9074
136111.5
... More
code248 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever equire:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps(Common SR 2023-24 Item No. 14.7.1, Page No. 132 Vol-02)
25
3236
80902.5
... More
code249 - 14.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings (Common SR 2023-24 Item No. 14.8, Page No. 132 Vol-02)
25
1494
37353.75
... More
code250 - Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (Common SR 2023-24 Item No. 14.16A, Page No. 134 Vol-02)
25
285
7140
... More
code251 - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Item no-14.28.2.1 pg no-136 For 32mm ida
25
96
2415
... More
code252 - Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm(Common SR 2023-24 Item No. 14.32.2, Page No. 136 Vol-02)
25
1068
26722.5
... More
code253 - Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy (Common SR 2023-24 Item No. 14.52a, Page No. 139 Vol-02)
25
630
15750
... More
code254 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 75mm dia., 6 kg/sq CM & class 3 (Common SR 23-24 Item 10.1.5,Page113 Vol-05)
125
231
28875
... More
code255 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 90mm dia., 6 kg/sq CM & class 3 (Common SR 23-24 Item 10.1.6,Pg 113 Vol-02)
100
308
30870
... More
code256 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 110mm dia.,6 kg/sq CM & class 3 (Common SR 23-24 Item-10.1.7 Pg 113 Vol-05)
250
431
107887.5
... More
code257 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 160mm dia., 6 kg/sq CM & class 3 (Common SR 23-24 Item10.1.9, Pg 113 Vol-05)
25
648
16222.5
... More
code258 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 percentage) total coated thickness with zinc coating 120 g/m2 as per IS: 277,in 240 mpa steel rade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required. (Common SR 2023-24 Item 7.38, Page 26 Vol-02)
330
596
196812
... More
code259 - Providing & fixing MS casing collars as per IS 1239 (part-II)1982 with all latest amendments for any dia.The thicknes of plate used for covering 1 end shall be 3mm (min). The dimensions of caps & colars shall be strictly as per IS 1239.pg-143 item-12.33
5
157
787.5
... More
code260 - 12.34 Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge.pg-143 item no-12.34
5
172
861
... More
code261 - 10.1 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.PVC pipes 140mm dia,6kg/sq CM & Class-3 item no-10.1.8 pg no-113
575
613
352590
... More
code262 - 13.4 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per directions of engineer in charge of the work and latest amendments 13.9 3.00 HP/2.2KW of 20 STG.Item no-13.9.3 Pg-150
5
23095
115479
... More
code263 - Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments.3 HP, size 50x40 Head 30M, Discharge 198 LPM( Common SR 2023-24 Item 13.40.3, Pg No. 157 Vol-05)
5
19756
98784
... More
code264 - 13.25 Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets
5
577
2887.5
... More
code265 - 13.26 Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box
5
1207
6037.5
... More
code266 - 13.30 Supply & delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc with ISI mark
5
4725
23625
... More
code267 - 13.31 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets.
875
42
36750
... More
code268 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes including cost of materials, labour, usagecharges of machinery complete as per specifications and as per directionsof the Engineer-in-Charge. (Common SR 2023-24 Item 11.16.2,Pg. 82 Vol-02)
4217.5
154
650971.125
... More
code269 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including ost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Common SR 2023-24 Item No. 8.9, Page No. 42 Vol-02)External Plastering
3040.65
404
1229182.7625
... More
code270 - Applying priming coat: With ready mixed red oxide zinc chromateprimer of approved brand and manufacture on steel galvanised iron/steel works including preparing the surface after thorougly cleaning oil,grease, dirt and foreign matter, cost of materials, labour complete as perspecifications and as per directions of Engineer-in-charge. Vol.02,It.No.8.34.3
277.45
186
51855.405
... More
code271 - Clearing & grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings & trees girth up to 300 mm, removal of stumps of trees cut earlier & disposal of unserviceable materials & stacking of serviceable material to be used or auctioned, including removal & disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer (Common SR 23-24 Item 2.5a,Pg 9 Vol-03)
1800
4
7434
... More
code272 - Providing, supplying and placing of Mid Back Chair of Make GODREJ/FEATHERLITE/ EQUIVALENT.. a) SEAT ASSEMBLY: The seat is made up of 1.5plus or minus0.1 cm thick hot-pressed plywood upholstered with fabric and moulded polyurethane foam. b) SEAT SIZE: 51.8cm (W) x 49.7cm (D) c) BACK ASSEMBLY: The Back is injection moulded in glass filled Polypropylene which is 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm. BACK SIZE: 47.9 cm(W) x 66.9 cm (H) d) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45 2 kg/m and hardness 14 plus or minus 2 kgf as per IS:7888 for 25percentage compression. e) ARMRESTS (ADJUSTABLE):The height adjustable armrest is made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Fro adjustment with moulded PU armtop f) ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features 360 revolving type Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort Till tension adjustment can be operated in seating position 5 position Tilt limiter giving option of variable sit angle to the chair Seat/back tilting ratio of 1:2 The mechanism housing is made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron) g) PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.0plus or minus0.3cm. h) PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30percentage glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is 166.1plus or minus0.5 cm.(76.1 plus or minus 1.0 cm. with castors). i) TWIN WHEEL CASTORS: The twin wheel castors are Injection moulded in black Polyamide having 6.01 0.1cm wheel Diameter. j) WIDTH (W) - 76.0cm DEPTH (D) - 76.0cm HEIGHT (H) - 95.5 cm- 105.5cm SEAT HEIGHT - 43.5 - 54.0cm This product should be certified by Indoor Advantage GOLD, GREENGUARD GOLD, BIFMA LEVEL 2 & GREENPRO
5
14400
72000
... More
code273 - Supplying and placing in position Main table of the following specifications of Make GODREJ/FEATHERLITE/EQUIVALENT .Its size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading along with supplying and placing in position ERU of the following specifications of Make GODREJ/FEATHERLITE/EQUIVALENT.Its size shall be 1550 Width x 450 Depth x 705 Height.The top of ERU shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading
30
46370
1391100
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%