Forest Department Tender

PWD SR 2023-24 Volumme I I.NO-2.2.1.1P.NO-15 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates (PWD SR 2023-24 / Volumme I / I.NO-2.2.1.1 /P.NO-15)

P.No A-7 Volume II - For Centering according to the Table For Finished Concrete ( P.No A-7 Volume II ) i.e = Foundation & Substructure

PWD SR 2023-24 Volumme I I.NO-2.5.1P.NO-17 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates (PWD SR 2023-24 / Volumme I / I.NO-2.5.1 /P.NO-17)

P.No A-7 Volume II - For Centering according to the Table For Finished Concrete ( P.No A-7 Volume II ) i.e = Column

PWD SR 2023-24 Volumme II I.NO-11.32 P.NO-84 - Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cut ting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) (PWD SR 2023-24 / Volumme II / I.NO-11.32 /P.NO-84)

PWD SR 2023-24 Volumme II I.NO-6.32P.NO-13 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.. (PWD SR 2023-24 / Volumme II / I.NO-6.32 /P.NO-13)

PWD SR 2023-24 Volumme II I.NO-8.3.2 P.NO-41 - Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge..:(PWD SR 2023-24 / Volumme II / I.NO-8.3.2 /P.NO-41)

PWD SR 2023-24Volumme II I.NO- 8.25P.NO-46 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge..(PWD SR 2023-24 / Volumme II / I.NO- 8.25 /P.NO-46)

PWD SR - Add 0.5% Scrutening

PWD SR - Add Contigency

PWD SR - Writing of slogans outside wall of the compound ( Rate Qutation)

GST - GST 18%