Rural Water Supply And Sanitation Department Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 2,42,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RWSSD/2021-22/WS/WORK_INDENT38132Bid Award Id
ViewTender No
RWSSD/2021-22/WS/WORK_INDENT38132Tender Authority
Rural Water Supply And Sanitation Department ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and boning rods at every 100 mtrs. Wherever necessary as directed in the following strata. (Manual Means) In Ordinary Soil/hard Soil..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
2242.02
-
587409.24
... More
Earth work excavation for water Supply & Sanitary lines, Electrical conduits either in pits or pipe line trenches (upto 600mm Trench width) as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing, using sight rails & boning rods at every 100 mm wherever necessary removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench, including backfilling the excavated earth to the extent required and utilising the remaining available excavated earth locally for the work. in the following strata classifications by Mechanical Means in ordinary soil with Mechanical means.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
960.86
-
124911.8
... More
Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and boning rods at every 100 mtrs. Wherever necessary as directed in the following strata. (Manual Means) (Ordinary Rock With out Blasting).With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
100.58
-
59543.36
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standard procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing) Upto 110mm dia, Coils shall be used. HDPE Pipe -- PE100 (PN 8 / 8 Kg/cm2) 63 mm.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
7781
-
1151588
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standard procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing) Upto 110mm dia, Coils shall be used. HDPE Pipe -- PE100 (PN 8 / 8 Kg/cm2) 75 mm.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
1361
-
254507
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standard procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing) Upto 110mm dia, Coils shall be used. HDPE Pipe -- PE100 (PN 8 / 8 Kg/cm2) 90 mm.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
695
-
173055
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standard procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing) Upto 110mm dia, Coils shall be used. HDPE Pipe -- PE100 (PN 8 / 8 Kg/cm2) 110 mm.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
793
-
275171
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standard procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing) Upto 110mm dia, Coils shall be used. HDPE Pipe -- PE100 (PN 8 / 8 Kg/cm2) 140 mm.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
322
-
175168
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standard procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing) Upto 110mm dia, Coils shall be used. HDPE Pipe -- PE100 (PN 8 / 8 Kg/cm2) 200 mm for seating surface box.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
62.4
-
63960
... More
Supplying and delivery of Resilient seated soft sealing Sluice valves with body, bonnet of ductile iron of grade GGG40, wedge fully rubber lined with EPDM and seals of NBR and valves should be of vacuum tight and 100% lead proof with face dimensions as per BS 5163-89/ IS 14846-2000 / DN 3202 F4/F5. The stem sealing should be with toroidal sealing rings (minimum 2 'O' rings). All the valves should be with electrostatic powder coating both inside and outside pocket less body passage. The valves shell be supplied with suitable size galvanized bolts and nuts of required number. -- 50 mm Dia, PN 16.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
72
-
418320
... More
Supplying and delivery of Resilient seated soft sealing Sluice valves with body, bonnet of ductile iron of grade GGG40, wedge fully rubber lined with EPDM and seals of NBR and valves should be of vacuum tight and 100% lead proof with face dimensions as per BS 5163-89/ IS 14846-2000 / DN 3202 F4/F5. The stem sealing should be with toroidal sealing rings (minimum 2 'O' rings). All the valves should be with electrostatic powder coating both inside and outside pocket less body passage. The valves shell be supplied with suitable size galvanized bolts and nuts of required number. -- 80 mm Dia, PN 16.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
22
-
188144
... More
Supplying and delivery of Resilient seated soft sealing Sluice valves with body, bonnet of ductile iron of grade GGG40, wedge fully rubber lined with EPDM and seals of NBR and valves should be of vacuum tight and 100% lead proof with face dimensions as per BS 5163-89/ IS 14846-2000 / DN 3202 F4/F5. The stem sealing should be with toroidal sealing rings (minimum 2 'O' rings). All the valves should be with electrostatic powder coating both inside and outside pocket less body passage. The valves shell be supplied with suitable size galvanized bolts and nuts of required number. -- 100 mm Dia, PN 16.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
10
-
108380
... More
Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller)..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
2303.54
-
237264.62
... More
Supplying and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, design derived from DIN 4057, Should be supplied with support tile I (FSL, FSS ,SI) ,Should be able to receive class AA traffic loads. With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
104
-
284440
... More
Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
183.9
-
915417.42
... More
Providing and laying reinforced cement concrete pipe NP2 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 -- NP2 Pipe 150mm dia.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
230
-
89930
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 63 mm dia Couplers.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
78
-
11228.1
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 75 mm dia Couplers.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
14
-
2560.88
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments --90 mm dia Couplers.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
7
-
1651.72
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 110 mm dia Couplers.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
8
-
2640
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 140 mm dia Couplers.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
4
-
2340
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 63 mm dia TEEs.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
95
-
23958.05
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 75 mm dia TEEs.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
37
-
13536.45
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 90 mm dia TEEs.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
41
-
22144.51
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 110 mm dia TEEs.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
21
-
26985
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 140 mm dia TEEs.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
36
-
56232
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 75 x 63 mm Reducers.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
95
-
27265
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 90 x 63 mm Reducers.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
37
-
16687
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 90 x 75 mm Reducers.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
37
-
19063.14
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 110 X 90 mm Reducers.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
62
-
50220
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 140 X 90 mm Reducers.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
36
-
46296
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 63 mm dia Elbow.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
25
-
6332
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments --75 mm dia Elbow.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
18
-
5318.82
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments --90 mm dia Elbow.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
17
-
7893.78
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments --110 mm dia Elbow.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
10
-
11500
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments --63 mm dia End Cap.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
61
-
15250
... More
Supply and installation of water connections to individual houses up to water meter point (which shall be fixed about one meter from customer boundary) and includes civil works like Earthwork excavation for the pipeline trenches for laying of MDPE /GI pipes of following diameters for the house connection in all types of soils, disintegrated rock, soft rock, hard rock, including cutting of any road using machine cutter, crossing drains, compound, cutting any surfaces along the pipelines such as tiles /floor/concrete/or any other surfaces using machine cutter, boring the wall surfaces comprising of BBM or SSM for conveying the pipelines to customer property, restoring the damaged portions inside or outside the property premises, refilling etc. Complete supply and laying of MDPE PE-80, PN 12.5 pipes with special such as Electro fusion tapping ferrule or saddles of pressure rating PN12.5/SDR 11 or higher grade of approved make conforming standard specifications with brass cutter, flow regulator, water tight cap-cutting edges for making hole/tapping suitable to HDPE distribution mains by electro fusion welding. Tapping ferrules(Mechanical type clamp saddle) with cost of GI pipes, all specials such as GI tee, GI elbow, GI coupler, stopper etc, and brass or SS tap for the following diameters. 15mm dia .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
667
-
3877938
... More
KSRB13-5 : Providing and fixing water meter with stop cock, jam nut, socket in G.I pipe line including cutting and threading the pipe and making long screws including cost of all materials, labour, HOM of equipments and testing complete as per specifications. Specification No:KBS 13.2.19 / 13.16 .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
667
-
880440
... More
Supply and fixing of HDPE water meter box to protect the water meter of class 'B: MultiJet type of size 15 to 32mm including HDPE box with base dia 300mmxlid dia 200mmxheight 250mm with openable lid and the cover is buried below GL with lid flush with GL including earthwork excavation for 600mmx600mm and base sand filling for 100mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12 to 20mm BG jelly for an height of 150mm and refilling with excavated earth for balance 100mm height, disposal of excess earth with all lead and lifts etc. complete as per drawing enclosed. -- HDPE Water Meter Box .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
667
-
333500
... More
Flow control Valve 10 LPM : Providing, & fixing Flow control valve using food grade materials SS 316 ball / 1/2 " [15mm] including cost of all materials, labour charges, HOM and testing complete as per of following specification. The FCV nominal design is for 10Ltr/Min. Discharges at 0.5 bar pressure loss and should not exceed the flow the range of 7 Lit /Min at 1 bar or more pressure. MOC of valve - Food grade stainless steel SS-316. MOC of Ball stainless steel-316. Flow direction arrow embossed on its outside surface. The Valve should act as flow control valve and non- return valve. .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
667
-
220376.8
... More
Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc., either in pits or in trenches 1.50m and above in width, in ordinary soil not exceeding 1.5 m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead up to 50m including breaking clods complete as per specifications .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
16.01
-
4786.99
... More
Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 CMS. Thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
30.68
-
171593.24
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour complete as per specifications. .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
66.7
-
19409.7
... More
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. -- 75 mm dia 4 KSC .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
667
-
78706
... More
Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“ii) English and Roman - Hyphen and the like not to be measured and paid for “ MORT Specification No.801. -- approximately 310 cms text ( jalotsava brouchure) .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
53360
-
37352
... More
Cutting of cement concrete road surface for pipeline trenches with steel or without steel up to 300 mm width and upto 200mm depth with neat finishing vertically as well as horizontally by using concrete cutting machine, it includes minimum two longitude groove and sufficient number of lateral groove for avoiding damaging of other portion of cement concrete road and disposing off the excavated stuff as directed including cost of cutting machinery along with generator and fuel for running machine and all type of labour, including cutting blade, watering for smooth cutting, barricading, danger lightening etc. as per standard specification. .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
400
-
66400
... More
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. -- Cutting Asphalt Road Surface .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
9.6
-
5203.2
... More
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. -- Cutting WBM /Earthen Road Surface .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
9.6
-
3321.6
... More
Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and boning rods at every 100 mtrs. Wherever necessary as directed in the following strata. (Manual Means) In Ordinary Soil/hard Soil with manual means.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
515.76
-
135129.12
... More
Earth work excavation for water Supply & Sanitary lines, Electrical conduits either in pits or pipe line trenches (upto 600mm Trench width) as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing, using sight rails & boning rods at every 100 mm wherever necessary removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench, including backfilling the excavated earth to the extent required and utilising the remaining available excavated earth locally for the work. in the following strata classifications by Mechanical Means in ordinary soil with Mechanical means Ordinary / Hard Soil - (Depth upto 3m).With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
184.2
-
23946
... More
Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and boning rods at every 100 mtrs. Wherever necessary as directed in the following strata. (Manual Means) (Ordinary Rock With out Blasting).With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
36.84
-
21809.28
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standard procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing) Upto 110mm dia, Coils shall be used. HDPE Pipe -- PE100 (PN 8 / 8 Kg/cm2) 75 mm.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
2000
-
374000
... More
Supplying and delivery of Resilient seated soft sealing Sluice valves with body, bonnet of ductile iron of grade GGG40, wedge fully rubber lined with EPDM and seals of NBR and valves should be of vacuum tight and 100% lead proof with face dimensions as per BS 5163-89/ IS 14846-2000 / DN 3202 F4/F5. The stem sealing should be with toroidal sealing rings (minimum 2 'O' rings). All the valves should be with electrostatic powder coating both inside and outside pocket less body passage. The valves shell be supplied with suitable size galvanized bolts and nuts of required number. -- 80 mm Dia, PN 16.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
2
-
17104
... More
Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller)..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
570.42
-
58753.26
... More
Excavation by manual means for foundation of buildings, water supply & sanitary lines and electrical conduits etc., either in pits or in trenches 1.50m and above in width, in soft rock without blasting/ordinary rock not exceeding 1.50mtrs in depth including dressing the bottom and sides of pit and trenches stacking the excavated stuff clear from edges of excavation with lead upto 50mt including cost of explosives, labour, HOM complete as per specifications..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
4.73
-
1414.27
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
0.34
-
1826.07
... More
Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320kgs, with 20mm dia and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with superplasticizer @3lts confirming to IS91031999Reaffirmed2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels, and beams, retaining walls, return walls, walls ( any thickness ) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
2.37
-
14657.98
... More
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.).With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
2
-
3636
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoir, cost of materials, labour, HOM of machinery complete as per specifications..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
0.22
-
18871.06
... More
Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
21.64
-
107719.59
... More
Providing and laying reinforced cement concrete pipe NP2 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 -- 150mm Dia.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
2
-
782
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 75 mm dia Couplers.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
20
-
3658.4
... More
Providing and fixing approved make Electro fusion Fittings and Specials suitable of the following Diameter of pipes as per IS 8008 with latest amendments -- 75 mm dia End Cap.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
4
-
1476
... More
Earthwork in surface excavation in ordinary soil for levelling and lowering the ground manually (other than foundation of buildings, culverts, road drains and trenches of pipe lines and cables) and removing the excavated stuff to a distance not exceeding 50m and lift upto 1.5m, excavated surface levelled and neatly dressed, disposed earth to be levelled after breaking of clods and neatly dressed as per specifications. Specification No KBS 2.1(a)/2.3.1..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
5.18
-
1289.82
... More
Providing and laying in position plain cement concrete of grade M10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
0.68
-
3652.14
... More
Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.460 cum, with super plasticizers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedestals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
0.88
-
5236.7
... More
Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with superplasticizer @3lts confirming to IS9103-1999Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels, and beams, retaining walls, return walls, walls ( any thickness ) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
0.32
-
1979.14
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoir, cost of materials, labour, HOM of machinery complete as per specifications. _do_ TMT bars Fe 500.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
0.014
-
1200.89
... More
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.).With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
2
-
3636
... More
Refilling the basement and pipeline trenches with selected earth from trench excavation including watering, consolidation in layers of 15 cms thick, including disposing of the surplus earth with a lead of 200 meters..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
1.2
-
123.6
... More
Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABL accredited lab. The water meters shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointer of the meter shall be as per ISO 4064 class B specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates.--150 mm Dia Note: the above rates are basic rates inclusive of transportation charges, earth work excavation, labour charges, cutting and threading, conveyance, welding and hire charges for tools and plants ets., complete. -- 80mm Dia Bulk Flow Meter.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
2
-
38902
... More
Earth work in excavation of foundation of structures upto 3 m depth by Mechanical means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead, including cost of labour, materials and HOM of machineries, etc., complete. -- Ordinary/Hard soil .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
16.09
-
836.68
... More
Earth work in excavation of foundation of structures upto 3 m depth by Mechanical means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead, including cost of labour, materials and HOM of machineries, etc., complete --Ordinary Rock (without blasting) 50%.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
16.09
-
1078.03
... More
Providing and Filling in foundation with granite / trap broken metal 100mm. And down size, with approved sand including hand packing, ramming, watering, including cost of all material sand labour with all lead and lift. complete as per specifications..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
3.22
-
5947.34
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
3.21
-
17240.27
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticizer @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges).With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
7.09
-
53716.68
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticizer @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification for staging, columns and braces above ground level (exclusive of cost of steel and fabrication charges) (SR of RWS&SD, Kalburgi Circle 2019-20, P.No -23, I.No - 4.48.3) (As per Rate Analysis).With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
6.74
-
89381.84
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticizer @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification and giving satisfactory water proof test including construction joints wherever necessary as per the directions of the departmental Officers complete for ring beam, side walls, bottom dome or bottom slab, shell portion and bottom ribs (exclusive of cost of steel and fabrication charges and jointing materials).With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
15.9
-
292550.46
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticizer @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specifications etc., complete for top rib and top dome or top slab (exclusive cost of steel and fabrication charges).With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
1.88
-
26078.23
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoir, cost of materials, labour, HOM of machinery complete as per specifications..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
6
-
514665.18
... More
Ladder inside the container: Providing anodized aluminum ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
4
-
12396
... More
Providing and constructing RCC hexagonal ventilator finial for RCC over head tank the finial to be constructed with CC (M-20) proportion using 20mm and down size jelly with reinforcement using 6mm dia., M.S. rods 4 nos., for each of the pillars both ways for full width of doom at 12cm c/c, the ventilator to be of 0.45 M x 0.5 M size provided with 25mm x 25mm x 5mm M.S. frame welded with diamond mesh to its full width and depth fully covered with aluminum mosquito mesh finished smooth with CM 1:3 proportion to required shape and size and ornamental finish including two coats of anti-corrosive paint for frame and mesh and two coats of cement paint matching to over head tank etc., complete..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
1
-
5704
... More
Filling available excavated earth ( excluding rock ) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour. .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
33.53
-
6739.53
... More
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.). ).With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
1
-
1818
... More
Providing and fixing enameled gauge plate 3 mm thick, 0.23 M wide with plastic float thick plastic indicator and flexible nylon wire etc., complete to 2.50 M height. .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
1
-
3563
... More
Providing 2 coats of snowcem / Water-proof cement paint of approved colour and shade over one coat of primer including curing etc.,complete for RCC over head tank..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
205.75
-
43824.75
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminum strip of spike 25mmx3mm including grounding as per specification. The aluminum strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging. -- 9m Staging.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
1
-
11739
... More
CI Puddle Flanges - Supplying, and Fixing CI puddle flanges confirming to IS 7181-1986 with latest amendments in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
5
-
13235
... More
CI Flanged Pipes - Supplying,, laying of CI flanged pipe true to line/hoisting of CI flanged pipe confirming to IS 7181-1986 with latest amendments in position and aligning to correct plumb including cost of jointing material, conveying to work spot with all lead and lifts etc. complete. -- 80 mm dia.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
60
-
118080
... More
Supply and delivery of Resilient seated soft sealing Sluice Valves with body, bonnet of Ductile Iron of grade GGG50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face dimensions as per BS 5163-89/IS 14846-2000/ DIN 3202 F4/F5. The stem sealing should be with Toroidal sealing rings (minimum 2 'O' rings). All the valves should be with electrostatic powder coating both inside and outside with pocket less body passage. The valves shall be supplied with suitable size galvanized bolts and nuts of required numbers as per relevant IS. -- 80 mm dia ( inlet, outlet, overflow and wash).With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
4
-
34208
... More
Providing 80 mm dia Duck foot bend confirming to IS 1538 (Part- I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
4
-
1400
... More
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
4
-
1280
... More
Providing 80 mm dia Medium class 90 ” double flanged bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
4
-
2000
... More
Providing 80 mm dia CI bank flange confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
4
-
800
... More
Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“ii) English and Roman - Hyphen and the like not to be measured and paid for “ MORTH Specification No.801..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
3000
-
2100
... More
Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of following size and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as directed including hand railing on both sides with 25mm dia G.I. pipes with angle iron props at 2 mtrs, interval and 0.5 mtr, height including fixing in ground with C.C. 1:2:4 and two coats of nonpoisonous anticorrosive bituminous paint with all lead and lift etc., complete. 65x65x8mm angle iron frame..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
18.5
-
33688.5
... More
Excavation by manual means for foundation of buildings, water supply & sanitary lines and electrical conduits etc., either in pits or in trenches 1.50m and above in width, in soft rock without blasting/ordinary rock not exceeding 1.50mtrs in depth including dressing the bottom and sides of pit and trenches stacking the excavated stuff clear from edges of excavation with lead upto 50mt including cost of explosives, labour, HOM complete as per specifications..With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
9.46
-
2828.54
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 240kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
0.68
-
3652.14
... More
Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.460 cum, with super plasticizers @ 3 litters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedestals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement.With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
4.72
-
28087.78
... More
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.) .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
4
-
7272
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoir, cost of materials, labour, HOM of machinery complete as per specifications. .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
0.4
-
34311.01
... More
Earth work in excavation of foundation of structures upto 3 m depth by Mechanical means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead, including cost of labour, materials and HOM of machineries, etc., complete. -- Ordinary/Hard soil
58.39
-
3036.28
... More
Earth work in excavation of foundation of structures upto 3 m depth by Mechanical means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead, including cost of labour, materials and HOM of machineries, etc., complete --Ordinary Rock (without blasting) 50%
58.39
-
3912.13
... More
Providing and Filling in foundation with granite / trap broken metal 100mm. And down size, with approved sand including hand packing, ramming, watering, including cost of all material sand labour with all lead and lift. complete as per specifications.
3.72
-
6870.84
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification
5.84
-
31365.47
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticizer @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges)
13.98
-
105918.07
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticizer @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification for staging, columns and braces above ground level (exclusive of cost of steel and fabrication charges)
12.35
-
163778.29
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticizer @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification and giving satisfactory water proof test including construction joints wherever necessary as per the directions of the departmental Officers complete for ring beam, side walls, bottom dome or bottom slab, shell portion and bottom ribs (exclusive of cost of steel and fabrication charges and jointing materials)
25.12
-
462192.93
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticizer @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specifications etc., complete for top rib and top dome or top slab (exclusive cost of steel and fabrication charges)
4.54
-
62976.16
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoir, cost of materials, labour, HOM of machinery complete as per specifications.
8
-
686220.24
... More
Ladder inside the container: Providing anodized aluminum ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete.
4
-
12396
... More
Providing and constructing RCC hexagonal ventilator finial for RCC over head tank the finial to be constructed with CC (M-20) proportion using 20mm and down size jelly with reinforcement using 6mm dia., M.S. rods 4 nos., for each of the pillars both ways for full width of doom at 12cm c/c, the ventilator to be of 0.45 M x 0.5 M size provided with 25mm x 25mm x 5mm M.S. frame welded with diamond mesh to its full width and depth fully covered with aluminum mosquito mesh finished smooth with CM 1:3 proportion to required shape and size and ornamental finish including two coats of anti-corrosive paint for frame and mesh and two coats of cement paint matching to over head tank etc., complete.
1
-
5704
... More
Filling available excavated earth ( excluding rock ) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour.
68.9
-
13848.9
... More
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.)
1
-
1818
... More
Providing and fixing enameled gauge plate 3 mm thick, 0.23 M wide with plastic float thick plastic indicator and flexible nylon wire etc., complete to 2.50 M height. .With all lead and lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments including all incidental charges, etc., complete as per the directions of the engineer incharge of the work.
1
-
3563
... More
Providing 2 coats of snowcem / Water-proof cement paint of approved colour and shade over one coat of primer including curing etc.,complete for RCC over head tank.
302.29
-
64387.77
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminum strip of spike 25mmx3mm including grounding as per specification. The aluminum strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging. -- 9m Staging
1
-
11739
... More
CI Puddle Flanges - Supplying, and Fixing CI puddle flanges confirming to IS 7181-1986 with latest amendments in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete.
5
-
13235
... More
CI Flanged Pipes - Supplying,, laying of CI flanged pipe true to line/hoisting of CI flanged pipe confirming to IS 7181-1986 with latest amendments in position and aligning to correct plumb including cost of jointing material, conveying to work spot with all lead and lifts etc. complete. -- 80 mm dia
64
-
125952
... More
Supply and delivery of Resilient seated soft sealing Sluice Valves with body, bonnet of Ductile Iron of grade GGG50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face dimensions as per BS 5163-89/IS 14846-2000/ DIN 3202 F4/F5. The stem sealing should be with Toroidal sealing rings (minimum 2 'O' rings). All the valves should be with electrostatic powder coating both inside and outside with pocket less body passage. The valves shall be supplied with suitable size galvanized bolts and nuts of required numbers as per relevant IS. -- 80 mm dia ( inlet, outlet, overflow and wash)
4
-
34208
... More
Providing 80 mm dia Duck foot bend confirming to IS 1538 (Part- I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.
4
-
1400
... More
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.
4
-
1280
... More
Providing 80 mm dia Medium class 90 ” double flanged bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.
4
-
2000
... More
Providing 80 mm dia CI bank flange confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.
4
-
800
... More
Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“ii) English and Roman - Hyphen and the like not to be measured and paid for “ MORTH Specification No.801.
3000
-
2100
... More
Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of following size and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as directed including hand railing on both sides with 25mm dia G.I. pipes with angle iron props at 2 mtrs, interval and 0.5 mtr, height including fixing in ground with C.C. 1:2:4 and two coats of nonpoisonous anticorrosive bituminous paint with all lead and lift etc., complete. 65x65x8mm angle iron frame.
19
-
34599
... More
Excavation by manual means for foundation of buildings, water supply & sanitary lines and electrical conduits etc., either in pits or in trenches 1.50m and above in width, in soft rock without blasting/ordinary rock not exceeding 1.50mtrs in depth including dressing the bottom and sides of pit and trenches stacking the excavated stuff clear from edges of excavation with lead upto 50mt including cost of explosives, labour, HOM complete as per specifications.
9.46
-
2828.54
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 240kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification
0.68
-
3652.14
... More
Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.460 cum, with super plasticizers @ 3 litters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedestals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement
4.72
-
28087.78
... More
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.)
4
-
7272
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoir, cost of materials, labour, HOM of machinery complete as per specifications.
0.4
-
34311.01
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements