Rural Water Supply And Sanitation Department Tender

Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/nn, shutter interlock section 40mmx26.7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading all aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be, with necessary steel screws, raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar. etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and fixing M.S.grill work for windows and ventilators using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, HOM of machineries etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and fixing in position fully panelled Honne wood shutters for doors, styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM of machineries etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and fixing Special make glazed Vitrified tiles (Granomite finish) of approved make, quality and colour of size 600x600x10mm thick fixed on existing flooring with a special adhesive for flooring, skirting and jointed with neat cement slurry mixed with pigment to match shade of tiles, including providing spacers at required interval and removing stains etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and applying two coats with oil bound washable distemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing, fabricating, assembling and fixing in position aluminium partitions using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 101.6mm x 44.45mm, 3.18mm.thick having section weight, plain sections 2.40kg/m single grove section 2.541kg/m. and double grove section 2.683 kg/rn and bottom bottom member 114.3 mm x 44.45 mm 3.18 mm thick and 2.6 46 kg/m; aluminium louvres of size 77.6mmx27.6mm 1.7mm. thick section weight 0.483kg/m; bottom portions provided with 12mm. thick pre laminated sheet both side of approved colour lamination exterior grade; aluminium sections of mat finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c; sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and riveted to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns or masonry on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chistling and making good with cement mortar to match the surface, providing and fixing bottom panel filled with the materials to a height of 0.9m. from floor level; and 5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top panel with lower sections, the glass and panels fitted with glazing clips of 19mmx17.3mm. with thickness of 0.9mm. weight 0.124kg/m; aluminium sections pre-treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars or any other sticky materials; vertical members embedded in the flooring by making suitable size holes and fixing with cement mortar, with necessary opening for fixing of doors of standard size (excluding cost of door opening) All the frame should be throughly cleaned free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Applying epoxy mortar over leached, honey combed and spalled concrete surface and exposed steel reinforcement etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete, using broken granite metal of 12.5mm nominal size and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide (using 3.5 kg of red oxide per 50 kg of cement) finished with floating coat of neat cement mixed with red oxide (mix of same proportion), including cost of materials, labour, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and laying flooring using prepolished, water cut / gang saw 19mm thick grey granite laid over a existing floors in CM 1:4 at 20mm thick (avg) and pointed with white / pigment etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and fixing in position 10mm thick plaster of pairs (Gypsum anhydrous) for ceiling flat surface upto a height of 5 m above floor level over first class teakwood strips 25mm / 6mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frames (frame work to be measured and paid for seperately) including cost of materials, labour, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Electrical Supply : Supplying Heavy Guage PVC Conduit pipe 19/20 Dia 2mm thick confirming to IS 2509 with suitable size bends metal /PVC junction boxes ,adhesive paste etc.., and running before concreting the slab.The conduite should be tied to the before reinforcement rods by using binding wires & unused ways of junction boxes and pipe ends should be covered using PVC end enclousees,run with 18SWG GI fishes wire wherever necessary. etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Supplying & Fixing Sheet Meatal Box made out of 18SWG sheet metal with Necssaery Holes for Cable/Conductor entry ass Reqiured with one coat of Priemer approved make etc.., 180x90x65mm etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Wiring for lighting/Power circute using one of FRLS PVC insulated 1100V Grade Multi Starded copper with low conducter Resistence single core wire is open or concealed system of wiring with Specified IS -694:1990 and Confirming to GTP of Group A 4 sqmm etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Supplying & adopting Loop System of in Existing PVC Conductor/Casing ,Caping Using 1100 V Grade copper conductor Flexible multi strand FRLS PVC insulated 2x1 Sqmm able with low conducter Resistence single core wire is open or concealed system of wiring Confirming to GTP without swich the ohter end of wire shall be terminted with sufficent Loose length in a wood /PVC Round Block complete for Each outlet Group A Medium Point Above 3.00mtr upto 6.00 mtr from Tapping Point to Outlet Wire Swich Box etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Supplying & Mounting 2.0 Nos Two way 6Amps Flush Type Switches either surface/flush Mounted on Existing Gang Box are in 4mm thich plsatic sheet & mouted on a flush mounted wooden box & wiring etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Supplying & Fixing Bakelight DP /Socket/ Switch with/without Neon indicator Over Existing wood Board or Flush Mounting in Plastic Plates /Nithces as per IS-1293 & IS-3854 Group A 32 Amps Flush /Projected type DP Switches etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Supplying & Fixing Superior Quality modular switch mounting poly corbonate plate with Necessary supporying Backplate with Required Nos of Machine Screws Bolts ,Nuts Etc., Complete on the Existing Metal /PVC Box 4 module etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Supplying of Horizental Type Street Light Florcent Fitting Suitable for Single /winlamp of 24 watts /25watts FTL T5 lamp Housing shall be with Pressure Dye cast Alluminum with UV Protected Clear acrylic corbonate lamp holder low loss high frequency Electronic Ballast with IP 54 Protection -do-2x4'-28watts etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Supplying& Fixing miniture circute breaker Existing MCB distribution Board using necessary fixing Material & C Type curve Indictor ON/OFF Energy cross-3 with short circute breaking capacity of 10K & complete wiring as required confirming IEC 60898 40-63Amps TPN etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Supplying of…TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 Volts with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit. The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube.(High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit.5star etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete. . etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Supplying, installation, testing & commissioning of 12Volts ..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

For wiring of UPS System and POP Lightings etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“ii) English and Roman -Hyphen and the like not to be measured and paid for MORTH Specification No.801 etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Exhaust Fan etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Water Conection and Sanitation : Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kg/sqm working pressure chemp plast/Wavin or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, in cluding cost of all materials, labour chareges, HOM of equipments and testing complete as per specifications. with 90mm outer dia. etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 65mm nominal bore including cost of all materials, labour and HOM of equipments with all leads etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 32mm nominal bore including cost of all materials, labour and HOM of equipments with all leads etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) 25mm nominal OD pipes etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and fixing white vitreous china clay, flat back wash basin size 550x400mm with a pair of 15mm C.P brass pillar tap with C.I / M.S brackets, 32mm C.P.brass waste of standard pattarn, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Construction brick masonry inspection chamber 455x610mm, and 450mm depth, (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg) R.C.C. top slab with cement concrete 1:2:4 mix 20mm and downsize granite metal, foundation concrete 1:5:10 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and fixing white vitreous china clay, flat back or half stall urinal basin of size 580x380x350mm in the range of four with 10 litres P.V.C automatic flushing cistern, C.I / M.S brackets, standard flush pipe and C.P.brass spreaders with brass unions and G.I. clamps C.I trap with outlet grating and other coupling in C.P brass, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and fixing white vitreous china clay, flat back, lipped front urinal basin of 430x260x350mm in the range of two 7.5 litre P.V.C with automatic flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Providing and fixing 1500x450mm dia rectangular shape mirror with plastic moulded frame of approved make and shape with 6mm thick hard board backing including cost of materials, labour etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Enguaged Mazdoor etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work

Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“ii) English and Roman - Hyphen and the like not to be measured and paid etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work