Rural Water Supply And Sanitation Department Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 2,45,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RWSSD/2020-21/WS/WORK_INDENT33576/CALL-4Bid Award Id
ViewTender No
RWSSD/2020-21/WS/WORK_INDENT33576/CALL-4Tender Authority
Rural Water Supply And Sanitation Department ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in excavation of foundation of structures upto 3 m depth as per drawing and technical specification, including setting out, providing shoring,strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead, including cost of labour, materials and HOM of machineries, etc., complete.
115.07
-
5983.64
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used. 63 mm DIA
4631
-
602030
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used. 75 mm DIA
6437
-
1042794
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used. 90 mm DIA
892
-
187320
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used. 110 mm DIA
4356
-
1254528
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used. 125 mm DIA
273
-
97734
... More
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. PVC pipes of 10kg/cm2 200mm dia
650
-
858000
... More
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 65 mm
90
-
121950
... More
Providing Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 80mm
10
-
29000
... More
Providing Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 100mm
18
-
68400
... More
Providing Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 125mm
3
-
12600
... More
Labour charges for making, fixing and testing of flanged joints for Cast Iron pipes / D.I. Pipes and specials with rubber insertion and necessary bolts and nuts and giving necessary hydraulic pressure test including conveying, loading and unloading the jointing materials etc., complete. 80 mm
103
-
8137
... More
Labour charges for making, fixing and testing of flanged joints for Cast Iron pipes / D.I. Pipes and specials with rubber insertion and necessary bolts and nuts and giving necessary hydraulic pressure test including conveying, loading and unloading the jointing materials etc., complete. 100 mm
18
-
1494
... More
Labour charges for making, fixing and testing of flanged joints for Cast Iron pipes / D.I. Pipes and specials with rubber insertion and necessary bolts and nuts and giving necessary hydraulic pressure test including conveying, loading and unloading the jointing materials etc., complete. 125 mm
3
-
357
... More
Supplying and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, design derived from DIN 4057, Should be suppied with support tile I (FSL, FSS ,SI) ,Should be able to receive class AA traffic loads
131
-
358285
... More
KSRRB M400- Wet Mix Macadam KSRRB M400-17. Providing, laying, spreading and compacting crushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed method of tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. MORTH Specification No. 406
191.67
-
361872.96
... More
Constructing un-reinforced,plain cement concrete for pavements using Grade concrete M30 over a prepared base with OPC coarse aggregate at 0.69cum,fine aggregates at 0.46cum,coarse and fine aggregate conforming to IS:383-2016,with superplastizer at 3ltrs conforming to IS:9103-2008,mixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved mix design,laid in approved fixed side form work (steel channel,laying and fixing of 125 micron thick polythene film,wedges,steel plates including leveling the formwork as per drawing) and spreading the concrete with shovels,rackers compacted using needle,screed and plate vibrator and finished with floaters in a continuous operation including provision of contraction,expansion,construction and logitudinal joints including groove cutting charges joint filler separation membrane of impermiable plastic sheet of 125 micron ,sealent primer.joint sealent,admixtures as approved,curing compound,finising to lines and grades,textured with texturing machine,and curing including cost of all materials,labour,hire charges of machineries,all lead and lift charges etc...complete as per specificationswith OPC at 360Kg/cum,and coarse aggregate at 0.69cum fine aggregates 0.46cum
436.97
-
2148144.52
... More
Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller) Note: Add Rs. 203.00 / cum for earth obtained from borrow pits.
4607.94
-
474617.82
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications.
8.74
-
45395.56
... More
Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick,vibrated for all works in foundation for footings, pedestals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. For Raft and Cover Slab
6.34
-
35878.06
... More
Providing and laying Reinforced cement concrete of mix design of M-25 Grade with cement @ 340 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.7 cum and fine aggregates @ 0.47 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges)
22.59
-
155035.17
... More
Providing and laying Reinforced cement concrete of mix design of M-25 Grade with cement @ 340 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.7 cum and fine aggregates @ 0.47 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc.,complete as per design and specification for staging, columns and braces above ground level (exclusive of cost of steel and fabrication charges)
17.45
-
211511.45
... More
Providing and laying Reinforced cement concrete of mix design of M-25 Grade with cement @ 340 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.7 cum and fine aggregates @ 0.47 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete asper design and specification and giving satisfactory water proof test including construction joints wherever necessary as per the directions of the departmental Officers complete for ring beam,side walls, bottom dome or bottom slab, shell portion and bottom ribs (exclusive of cost of steel and fabrication charges and jointing materials)
35.93
-
630894.87
... More
Providing and laying Reinforced cement concrete of mix design of M-25 Grade with cement @ 340 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.7 cum and fine aggregates @ 0.47 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specifications etc., complete for top rib and top dome or top slab (exclusive cost of steel and fabrication charges)
7.57
-
96350.96
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons.
32.4
-
8359.2
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoir, cost of materials, labour, HOM of machinery complete as per specifications TMT bars Fe 500 ( 600 X 600 ) mm For raft and cover slab
0.48
-
33295.2
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications TMT bars Fe 550
10.51
-
734712.06
... More
Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of following size and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as directed including hand railing on both sides with 25mm dia G.I. pipes with angle iron props at 2 mtrs, interval and 0.5 mtr, height including fixing in ground with C.C. 1:2:4 and two coats of nonpoisonous anticorrosive bituminous paint with alllead and lift etc., complete. 65x65x8mm angle iron frame.
24
-
43704
... More
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete
6.1
-
18903.9
... More
Providing and constructing RCC hexagonal ventilator finial for RCC over head tank the finial to be constructed with CC (M-20) proportion using 20mm and down size jelly with reinforcement using 6mm dia., M.S. rods 4 nos., for each of the pillars both ways for full width of doom at 12cm c/c, the ventilator to be of 0.45 M x 0.5 M size provided with 25mm x 25mm x 5mm M.S. frame welded with diamond mesh to its full width and depth fully covered with aluminium mosquito mesh finished smooth with CM 1:3 proportion to required shape and size and ornamental finish including two coats of anti-corrosive paint for frame and mesh and two coats of cement paint matching to over head tank etc., complete.
2
-
11552
... More
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.)
2
-
3636
... More
Providing and fixing enameled gauge plate 3 mm thick, 0.23 M wide with plastic float thick plastic indicator and flexible nylon wire etc., complete to 2.50 M height.
2
-
6764
... More
Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
437.77
-
92369.47
... More
Labour charges for fixing puddle flanges in position of RCC including (80mm to 200mm)
8
-
3648
... More
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 63 mm pipe
5.4
-
664.2
... More
Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABL accredited lab. The water meters shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointer of the meter shall be as per ISO 4064 class B specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates. Note: the above rates are basic rates inclusive of transportation charges, earth work excavation, labour charges, cutting and threading, conveyance, welding and hire charges for tools and plants ets., complete. 100 mm dia
7
-
178717
... More
Approved make electro fusion saddle comply with BS EN 12201-3:2011. PN-12.5 rating and food grade raw mateial as per BS 6920 for effect on water qualityintended for human consumpution material of conmstrcution: PE 80 or PE 100 and color of fitting- Blue or Black for water applications, EF taping Saddle is V- Regualted type designed to fuse at a fusion voltage of 40V AC. EF tapping saddel shall have molded SS/ Brass metal female threaded outlet. EF tapping saddle is fused by using a top loading pillar type pressure exerting 1500N (150 kilograms approx.) top load on EF Saddle. Fusion time is 170 secs and cooling time is10mins, Exerted pressure should be removed after completing the 10mins cooling time. 63x20, 75x20, 90x20, 110x20, 140x20(Approved Rate) 63 mm dia
585
-
204750
... More
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 15mm nominal OD pipes
3344
-
421344
... More
Supplying,laying,jointing ,testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excluding Cost of Specials) with Cuts and Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete Class-B (MEDIUM) 15mm dia (Above GL)
2675.2
-
337075.2
... More
Supplying,laying,jointing ,testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excluding Cost of Specials) with Cuts and Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete Class-B (MEDIUM) 32mm dia Casing purposeGL)
627
-
176187
... More
Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any.
836
-
31768
... More
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI elbow confirming to IS 1239- II, 1991 with latest amendments if any
836
-
31768
... More
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI bend confirming to IS 1239- II, 1991 with latest amendments if any.
5852
-
380380
... More
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI union confirming to IS 1239-II, 1991 with latest amendments if any.
1672
-
91960
... More
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI tee confirming to IS 1239-II, 1991 with latest amendments if any.
836
-
33440
... More
Providing and fixing Flow control valve using food grde materials SS 316 ball / 1/2" [15mm] including cost of all materials, labour charges, HOM and testing complete as per of following specification. The FCV nominal design is for 5ltr/Min Discharge at 0.5 bar pressure loss and should not exceed the flow at range of 7ltr/Min at 1 bar or more pressure. MOC of valve : Food grade stainless steel SS -316 MOC of valve : stainless steel SS -316 flow direction arrow embossed on its outside surface , the valve should act as flow control valve and non return valve. minimum operating pressure - 0.1kg ( 10cm head). designed pressure 1 mtr to 50 mtr. accuracy of valves + 20 % of average flow rate. orifice size : not less than 12 mm. ball size : not less than 12 mm. weight of FCV : not less than 125 gms. length : not less than 70 cm . The FCV is with internal arrangements of very simple passage in line such that the valve will pass the small flaoting particle if any entered in the valve to vaoid choking . The FCV shall be got tested from FCRI by the manfacturer as per the above standards , the quantum of checking to be done from FCRI is th be atatched . The FCV should be fitted on saddle which is fixed on distribution line ( Approved rate )
836
-
213180
... More
KSRB13-5 : Providing and fixing water meter with stop cock, jam nut, socket in G.I pipe line including cutting and threading the pipe and making long screws including cost of all materials, labour, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.19 / 13.16
836
-
1103520
... More
KSRB13-6.1-1 : Providing and fixing in position brass bib cock of approved quality 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.2 / 13.3
836
-
158840
... More
Supply and fixing of HDPE water meter box to protect the water meter of class 'B: multijet type of size 15 to 32mm including HDPE box with base dia 300mmxlid dia 200mmxheight 250mm with openable lid and the cover is buried below GL with lid flush with GL including earthwork excavation for 600mmx600mm and base sand filling for 100mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12 to 20mm BG jelly for an height of 150mm and refilling with excavated earth for balance 100mm height,disposal of excess earth with all lead and lifts etc complete
836
-
418000
... More
Supply and delivery at site special moulded variety 63 mm dia PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
251
-
22590
... More
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments
3
-
4725
... More
Providing 2 coats of Snowcem/Water-proof cement paint of approved colour and shade over one coat of primer including curing etc., complete for RCC over head tank.
825.49
-
175829.37
... More
Laying cast iron pipes and specials of all classes without earth work, true to line and level including conveying carefully to site, rolling and lowering into trenches and perfect linking of joints etc., wherever necessary 80mm
18
-
936
... More
Laying cast iron pipes and specials of all classes without earth work, true to line and level including conveying carefully to site, rolling and lowering into trenches and perfect linking of joints etc., wherever necessary 100mm
24
-
1296
... More
Laying cast iron pipes and specials of all classes without earth work, true to line and level including conveying carefully to site, rolling and lowering into trenches and perfect linking of joints etc., wherever necessary 150 mm
42
-
3108
... More
KSRRB M800-10. Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications (ii) English and Roman-Hyphen and the like not to be measured and paid for "MORTH Specification No 801
3200
-
2240
... More
Providing 80 mm dia Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.
6
-
17400
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them. 2.75 meter length, 80mm dia
6
-
16800
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them. 2.75 meter length, 100mm dia
8
-
26856
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them. 2.75 meter length, 150mm dia
14
-
68950
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them. 1 meter length, 80 mm dia
2
-
2400
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them. 1 meter length, 100 mm dia
2
-
2978
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them. 1 meter length, 150 mm dia
4
-
6800
... More
Labour charges for hoisting C.I. flanged pipes 2.75mtrs length in position aligning the plumb and jointing for RCC over head tank 80mm to 200mm
36
-
22176
... More
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I toXXII) 1978 with latest amendments if any cost of all materials, labour charges etc.complete.
2
-
640
... More
Providing different dia Medium class 90” double flanged bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 80 mm
2
-
1000
... More
Providing different dia Medium class 90” double flanged bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 100 mm
2
-
1200
... More
Providing different dia Medium class 90” double flanged bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 150 mm
4
-
4800
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging.
2
-
19172
... More
Providing and fixing M.S. Hand railing for Balcony with 50mm dia. M.S. hollow pipe of 14 gauge, welded to 20mmx20mm M.S square rod placed vertically, spaced at 100mm at regular intervals of 600mm. These vertical rods laterally tied to 3 horizontal rods spaced at equal interval. These assembly is fixed to concrete by using expansion bolts and welding the same to reinforcement bars and making good the surface. All the joints and sections hould be cut to length, welded and grinded wherever necessary etc., complete . The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, etc., complete as per specification and drawing .
66
-
187440
... More
Providing and constructing load bearing wall with solid concrete blocks having block density not less than 1800kg/m3 having a minimum average compressive strength of 5.00 N/mm2 confirming to IS 2185 (Part 1):2005 and constructed with CM 1:4, as per IS 2572:2005 including cost of all materials labour charges, scaffolding, curing, hire charges of machineries etc., complete as per specifications with solid concrete blocks of size 400x150x200mm
16.2
-
14758.2
... More
Dismalting plastering and removing the debris with a lead upto 200m including cost of materials, labour, hom complete as per specifications(page no 270/37.50 of PWD SR 2018-19)
200.01
-
7400.37
... More
Providing 20mm thick cement plaster in single coat with cement mortar 1:3, to stone masonry including rounding off corners wherever required smooth rendering,including providing and removing scaffolding, cost of materials, labour, curing etc.,complete as per specifications.
200.01
-
57002.85
... More
Supply and delivery of Resilient seated soft sealing Sluice Valves with body, bonnet of Ductile Iron of grade GGG50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face dimensions as per BS 5163-89/IS 14846-2000/ DIN 3202 F4/F5. The stem sealing should be withToroidal sealing rings (minimum 2 'O' rings). All the valvesshould be with electrostatic powder coating both inside andoutside with pocket less body passage. The valves shallbe supplied with suitable size galvanized bolts and nuts ofrequired numbers as per relevant IS.
4
-
75860
... More
KSRRB M800-10. Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications (ii) English and Roman-Hyphen and the like not to be measured and paid for "MORTH Specification No 801
20000
-
14000
... More
Providing and laying in position plain cement concrete of mix M15 with OPC cement @ 240kgs, with 40mm and down size graded granite metal coarse aggregates @0.878cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.
14.8
-
85588.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements