Rural Water Supply And Sanitation Department Tender

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons.

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour complete as per specificaitons.

Providing and removing centering, shuttering, strutting, propping etc. and removal of form work for flat surface such as roofs landings, balconies and likes, thickness upto 200mm including cost of all materials, labour complete as per specifications. Upto 3.50m from Ground Level Specification No.

Providing T.M.T. steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 for TMT Bars Fe 500

Providing and constructing granite / trap / basalt size stone masonry in foundation with cement mortar 1:6, stone hammerd dressed in courses not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications.

Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications.

Providing and laying in position plain cement concrete of mix CC 1:2:4 (M15) with cement @ 240 kgs with 20mm and down size graded granite metal coarse aggregates @ 0.69cum and fine aggregates @ 0.459cum machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, & cills including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No.

Earthwork excavation ( in deposits) and filling sides of foundation upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50m. and lift upto 1.5 m. including cost of all labour complete as per specifications.

Providing and constructing non-load bearing wall with cement concrete solid blocks with compressive strength not less than 35 Kg/sqm with cement mortar 1:4 (Jamb, closer blocks) with blocks of size 40x10x20cms. (lxbxh) conforming to I.S " 2185/1965 in superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications.

Providing and constructing non-load bearing wall with cement concrete solid blocks with compressive strength not less than 35 Kg/sqm with cement mortar 1:4 (Jamb, closer blocks) with blocks of size 40x150x20cms. (lxbxh) conforming to I.S " 2185/1965 in superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications.

Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry including rounding off corners wherever required smooth rendering,: Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry including rounding off corners wherever required smooth rendering,: Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

Providing and installing pf pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The totsl coated thickness (TCT) of the sheet will be 0.47 mm+/-0.02 mm tolerance Zinc-Alu Alloy coating AZ 150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses.

Providing and fixing 1mm thick M.S. sheet garage door with frame and diagonal braces of size 40x40x6 mm angle Iron, using M.S. flats 30x6 mm for diagonal braces and central cross pieces 3.15mm thick M.S. Gusset plates at the junctions and corners, with handles, stoppers and locking arrangements etc., including applying a priming coat of red lead paint cost of materials, labour, HOM of machinery complete as per specifications. 1 double leaf door of size 2.4x2.4m

SOLID PVC DOOR FRAME Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge

SOLID PANEL PVC DOOR SHUTTER Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm fro styles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form styles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the styles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 m.m Aluminium hinges.

Providing & fixing Vitrified glazed tiles of approved quality & colour of size 600x600x10mm thick fixed on a bed of 12mm thick cement mortar 1:3 mix, flush pointing with white cemnt using colour pigment, including cost of materials, labour, curing complete as per specification.

Providing skirting, dado, rises of steps with colour glazed tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface ( excluding cost of rough plastered surface which should be measured and paid separately ) using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Specification No.KBS 14.16, 14.17 Colour glazed tiles 30x45 cms 6mm thick with border of size 30x10

Providing and fixing white vitreous china clay, water closet Indian type ( Squatting pan ) of size 580mm with footrests, 100mm S or P trap, (approved make) cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.

Providing and fixing white vitreous china clay, flat back wash basin size 550x400mm with a pair of 15mm C.P brass pillar taps with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.

Providing and fixing 453 x 357mm dia rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing including cost of materials, labour complete as per specifications.

Providing and fixing C.P. brass towel rail 600 mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per specifications.

Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in CC 1:2:4 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). 10cms x 7.5cms

Providing and finishing external walls in two coats with primer waterproof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.

Providing, fabricating, assembling and fixing in position aluminium partitions using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 101.6mm x 44.45mm, 3.18mm. thick having section weight, plain sections 2.40kg/m single grove section 2.541 kg/m. and double grove section 2.683 kg/m and bottom member 114.3mmx44.45mm 3.18mm thick weight 2.646 kg/m; aluminium louver of size 77.6mmx27.6mm 1.7mm. thick section weight 0.483kg/m; bottom portions provided with 12mm. thick prelaminated sheet both side of approved colour lamination exterior grade; aluminium sections of mat finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c: sections are cut to the required lengths, joints mitered and corne` grinded subdividing frames tennoned and rivetted to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C columns or masonry on sides, R.C.C lintels or beams at top and floor at bottom, including cutting chistling and making good with cement mortar to match the surface , providing and fixing bottom panel filled with the materials to a height of 0.9m from floor level ; and 5.5mm thick plain glass for middle portion viz., 0.9m to 2.13 m and top panel with lower sections, the glass and panels fitted with glazing clips of 19mmx17.3mm with thickness of 0.9mm. weight 0.124kg/m; Using Aluminium section powdered coated to a minimum of 60 - 70 microns with exterior durable pure polester grade powder of approved quality sections pre treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of morta` or any other sticky materials, vertical membe` embedded in the flooring by making suitable size holes and fixing with cement mortar,

Providing and laying flooring 40 mm thick, with an under layer of 30mm thick 1:2:4 cement concrete, using broken granite metal of 12.5mm nominal size and top layer of 10mm thick plaster with cement mortar 1:3, finished with floating coat of neat cement , including cost of materials, labour, curing, complete as per specifications.

Sinking of Borewell of 165mm dia clear using super fast hydraulic Rig of capacity 250 PSIG & above 900 CFM & above in all strata including over burden upto 20m fixing of casing pipes collars & cap with necessary cutting & threading, including transportation of Rig & supporting vehicles, crew charges & cost of consumables etc, complete including yield testing & the final depth with a minimum working compressor for one hour (casing pipe collars & cap will be supplie departmenatally) A) 0 to 50.00 mtrs

Sinking of Borewell of 165mm dia clear using super fast hydraulic Rig of capacity 250 PSIG & above 900 CFM & above in all strata including over burden upto 20m fixing of casing pipes collars & cap with necessary cutting & threading, including transportation of Rig & supporting vehicles, crew charges & cost of consumables etc, complete including yield testing & the final depth with a minimum working compressor for one hour (casing pipe collars & cap will be supplie departmenatally) B) 50 to 100.00 mtrs

Sinking of Borewell of 165mm dia clear using super fast hydraulic Rig of capacity 250 PSIG & above 900 CFM & above in all strata including over burden upto 20m fixing of casing pipes collars & cap with necessary cutting & threading, including transportation of Rig & supporting vehicles, crew charges & cost of consumables etc, complete including yield testing & the final depth with a minimum working compressor for one hour (casing pipe collars & cap will be supplie departmenatally) C) 100 to 150.00 mtrs

Sinking of Borewell of 165mm dia clear using super fast hydraulic Rig of capacity 250 PSIG & above 900 CFM & above in all strata including over burden upto 20m fixing of casing pipes collars & cap with necessary cutting & threading, including transportation of Rig & supporting vehicles, crew charges & cost of consumables etc, complete including yield testing & the final depth with a minimum working compressor for one hour (casing pipe collars & cap will be supplie departmenatally) D) 150 to 200.00 mtrs

Sinking of Borewell of 165mm dia clear using super fast hydraulic Rig of capacity 250 PSIG & above 900 CFM & above in all strata including over burden upto 20m fixing of casing pipes collars & cap with necessary cutting & threading, including transportation of Rig & supporting vehicles, crew charges & cost of consumables etc, complete including yield testing & the final depth with a minimum working compressor for one hour (casing pipe collars & cap will be supplie departmenatally) E) 200 to 250.00 mtrs

Supply of ISI mark 175mm nominal bore plain end Steel Casing pipe grade of steel Fe-410 of wall thickness 5.4 mm thick confirming to IS 4270:2001 and latest amendments electric resistance welded steel tube material and confirming to IS 1387/1993 & manufactured by basic open hearth electric or basic oxygen process in random length of 4 to 7 mtrs. Both ends threaded confirming to IS 554/1985, one end fixed with a socket confirming to IS 4270:2001 and the other end with screwed pipes. All pipes shall be reasonably free from defects. The tubes shall be reasonably straight should be with ISI marking, weighing 25.10 kg/mtr (Inclusive of all taxes and duties) Prices include Collar-Medium duty.

Providing & fixing 175mm dia Borewell cap medium class (RWSS-SR 2018-19item-15.87/pg-338)

Supply and delivery at site brand new submersible Single Phase PUMPSET suitable for bore well 150mm dia with ISI Mark IS 8034 1989 and IS 9283/1995 with latest amendments, as per Bureau of India Standards. TEXMO - Pump Motar 2 Hp Stage 16

Supply and delivery of galvanized mild steel tubes Of 6Mtrs Standrad lenth heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover) a) 50mm dia

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. (1x3x4Sqm)

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm

Gate value 50mm nominal bore-gun metal

Supply and delivery at site brand new best make starter/ control panel suitable for up to 7.5 HP centrifugal pump confirming with ISI mark and its latest amendments. 7.5 to 10 HP centrifugal pump

Laying and jointing G.I. pipes without earthwork including aligning to line and slope, fixing collars, elbows, tees, bends, gland cock and other fittings with cuts and threads wherever necessary,

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia.

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work.

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work.