Rural Water Supply And Sanitation Department Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 2,51,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RWSSD/2021-22/WS/WORK_INDENT38690Bid Award Id
ViewTender No
RWSSD/2021-22/WS/WORK_INDENT38690Tender Authority
Rural Water Supply And Sanitation Department ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Earth work excavation for pipeline trenches including depositing on bank upto a lead of 10mtrs. Including shoring and strutting, danger lighting and using sight rails and doning roads at every 100. Mtrs. Wherever necessary as directed in the following Strata. In Ordinary/ Hard soil
615.465
-
161251.83
... More
Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/1987 and fabricated as per IG124/1984 with ISI mark with its latest amendments. 63mm dia
635
-
57150
... More
75mm dia
68
-
8160
... More
90mm dia
54
-
8640
... More
110mm dia
42
-
7980
... More
140mm dia
22
-
4400
... More
Providing and fixing to wall, ceiling and floor, Medium Density Polyethylene Pipes (MDPE) 6kg/sqcm. Working pressuere of outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM and testing complete as per specifications. No.KBS 13.2.15.1/13.9 for internal water supply connection. 20mm Dia.
4926
-
527082
... More
GI Spaical: Providing wrought mild steel (galvanized ) 15 mm Dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any .
1642
-
62396
... More
GI Spaical: Supply and delivery at site wrought mild steel (galvanized ) 15 mm Dia GI Union confirming to IS 1239-II, 1991 with latest amendments if any
1642
-
90310
... More
GI Spaical: Supply and delivery at site wrought mild steel (galvanized ) 15 mm Dia GI Elbow confirming to IS 1239-II, 1991 with latest amendments if any.
1642
-
62396
... More
GI Spaical: Supply and delivery at site wrought mild steel (galvanized ) 15 mm Dia GI Bend confirming to IS 1239-II, 1991 with latest amendments if any
3284
-
213460
... More
Supplying, laying, jointing, testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excluding Cost of Specials) with Cuts and Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete (Contractor shall make his own arrangements for procuring water for testing) 15mm Dia.
821
-
103446
... More
GI encasing 32mm Dia for Drain crossing
985.2
-
276841.2
... More
Providing and fixing in position brass bib cock of approved quality nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications.
821
-
155990
... More
Providing and fixing Flow Control Valve using food grade materials SS 316 ball/1/2" (15mm) including cost of all materials, labour charges, HOM and testing complete as per of following specification. The FCV nominal design is for 10Ltr/Min. Discharges at 0.5 bar pressure loss and should not exceed the flow the range of 7Ltr/Min. at 1 bar or more pressure, MOC of value-Food grade stainless steel SS-316. MOC of ball stainless steel-316. Flow direction arrow embossed on its outside surface. The value should at as follow controle valve and non-return valve. Minimum operating pressure-0.1kgf (10 cm head), designed pressure: 1m to 50m Accuracy of values: +20% of avarage flow rate orifice size:not be less than 12mm. Ball size: not less than 12mm. Weight of FCV: not less than 125gms. Length: not be less than 70mm. The FCV is with internal arrangements of very simple passage in the line such that the valve will pass the small floating particles if any entered in the valve to avoid choking. The FCV shall be got tested from FCRI by the manufacture as per above standards. The quantum of checking to be done from FCRI is attached here with. The FCV should be fitted on saddle, which is fixed on distribution pipeline Flow Control Valve
821
-
271258.4
... More
Provding and fixing water meter with Stop cock, jam nut socket in GI pipe line including cutting and threading the pipe and making long screws inluding cost of all materials labour,HOM of equipments and testing complete as per specifications
821
-
1083720
... More
Supply and fixing of HDPE water meter box to protect the water meter of class 'B: multijet type of size 15 to 32mm including HDPE box with base dia 300mmxlid dia 200mmxheight 250mm with openable lid and the cover is buried below GL with lid flush with GL including earthwork excavation for 600mmx600mm and base sand filling for 100mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12 to 20mm BG jelly for an height of 150mm and refilling with excavated earth for balance 100mm height,disposal of excess earth with all lead and lifts etc complete as per drawing enclosed
821
-
410500
... More
Refilling the pipeline trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm thick including disposing of the surplus earth with a lead of 200 m.
615.465
-
63392.9
... More
Supplying and fixing RCC demarcation stones of 30cmsx15cms, and 90cms, deep using 1:2:4 CC and 6mm dia rods for verticals and stirrups and rendered smooth, including engraving letter "JJM Logo" 6mm deep on the top including fixing demarction stones 30cms below ground level and in CC 1:3:6 15cms height, with 8 cms offset around the stone and curing for 10 days including earthwork excavation in all types of soils with all lead and lift.
821
-
361240
... More
Providing and laying in position plain cement concrete of grade M15 with OPC cement @ 240kgs, with 40mm and down size graded granite metal coarse aggregates @0.878cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.
104.9625
-
549583.65
... More
Painting two coats on new concrete surface :Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces, with materials, labour complete as per specifications. MORTH Specification No 803
812.79
-
66648.78
... More
Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“ii) English or any local language Hyphen and the like not to be measured and paid for “MORTH Specification No.801
78816
-
55171.2
... More
UPGRADATION OF HTC TO FHTC : Earth work excavation for pipeline trenches including depositing on bank upto a lead of 10mtrs. Including shoring and strutting, danger lighting and using sight rails and doning roads at every 100. Mtrs. Wherever necessary as directed in the following Strata.
20.25
-
5305.5
... More
Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/1987 and fabricated as per IG124/1984 with ISI mark with its latest amendments 63mm dia
30
-
2700
... More
75mm dia
10
-
1200
... More
90mm dia
7
-
1120
... More
110mm dia
3
-
570
... More
Providing and fixing to wall, ceiling and floor, Medium Density Polyethylene Pipes (MDPE) 6kg/sqcm. Working pressuere of outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM and testing complete as per specifications. No.KBS 13.2.15.1/13.9 for internal water supply connection.
150
-
16050
... More
Supplying, laying, jointing, testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excluding Cost of Specials) with Cuts and Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete (Contractor shall make his own arrangements for procuring water for testing)
50
-
6300
... More
GI Spaical: Providing wrought mild steel (galvanized ) 15 mm Dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any
100
-
3800
... More
GI Spaical: Supply and delivery at site wrought mild steel (galvanized )15 mm Dia GI Union confirming to IS 1239-II, 1991 with latest amendments if any
50
-
2750
... More
GI Spaical: Supply and delivery at site wrought mild steel (galvanized ) 15 mm Dia GI Elbow confirming to IS 1239-II, 1991 with latest amendments if any
100
-
3800
... More
GI Spaical: Supply and delivery at site wrought mild steel (galvanized) 15 mm Dia GI Bend confirming to IS 1239-II, 1991 with latest amendments if any
200
-
13000
... More
Providing and fixing in position brass bib cock of approved quality nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications.
50
-
9500
... More
Providing and fixing Flow Control Valve using food grade materials SS 316 ball/1/2" (15mm) including cost of all materials, labour charges, HOM and testing complete as per of following specification. The FCV nominal design is for 10Ltr/Min. Discharges at 0.5 bar pressure loss and should not exceed the flow the range of 7Ltr/Min. at 1 bar or more pressure, MOC of value-Food grade stainless steel SS-316. MOC of ball stainless steel-316. Flow direction arrow embossed on its outside surface. The value should at as follow controle valve and non-return valve. Minimum operating pressure-0.1kgf (10 cm head), designed pressure: 1m to 50m Accuracy of values: +20% of avarage flow rate orifice size:not be less than 12mm. Ball size: not less than 12mm. Weight of FCV: not less than 125gms. Length: not be less than 70mm. The FCV is with internal arrangements of very simple passage in the line such that the valve will pass the small floating particles if any entered in the valve to avoid choking. The FCV shall be got tested from FCRI by the manufacture as per above standards. The quantum of checking to be done from FCRI is attached here with. The FCV should be fitted on saddle, which is fixed on distribution pipeline.
50
-
16520
... More
Provding and fixing water meter with Stop cock, jam nut socket in GI pipe line including cutting and threading the pipe and making long screws inluding cost of all materials labour,HOM of equipments and testing complete as per specifications
50
-
66000
... More
Supply and fixing of HDPE water meter box to protect the water meter of class 'B: multijet type of size 15 to 32mm including HDPE box with base dia 300mmxlid dia 200mmxheight 250mm with openable lid and the cover is buried below GL with lid flush with GL including earthwork excavation for 600mmx600mm and base sand filling for 100mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12 to 20mm BG jelly for an height of 150mm and refilling with excavated earth for balance 100mm height,disposal of excess earth with all lead and lifts etc complete as per drawing enclosed
50
-
25000
... More
Refilling the pipeline trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm thick including disposing of the surplus earth with a lead of 200 m.
20.25
-
2085.75
... More
Supplying and fixing RCC demarcation stones of 30cmsx15cms, and 90cms, deep using 1:2:4 CC and 6mm dia rods for verticals and stirrups and rendered smooth, including engraving letter "JJM Logo" 6mm deep on the top including fixing demarction stones 30cms below ground level and in CC 1:3:6 15cms height, with 8 cms offset around the stone and curing for 10 days including earthwork excavation in all types of soils with all lead and lift.
50
-
22000
... More
Providing and laying in position plain cement concrete of grade M15 with OPC cement @ 240kgs, with 40mm and down size graded granite metal coarse aggregates @0.878cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.
3.375
-
17671.5
... More
Painting two coats on new concrete surface :Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces, with materials, labour complete as per specifications. MORTH Specification No 803
49.5
-
4059
... More
Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“ii) English or any local language Hyphen and the like not to be measured and paid for “MORTH Specification No.801
4800
-
3360
... More
DISTRIBUTION MAIN : Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including, testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used. 63 mm Dia
10373
-
1348490
... More
75 mm Dia
779
-
126198
... More
90 mm Dia
870
-
182700
... More
110 mm Dia
669
-
192672
... More
140 mm Dia
701
-
316151
... More
Supplying, laying, jointing, testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excluding Cost of Specials) with Cuts and Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete (Contractor shall make his own arrangements for procuring water for testing) 50mm Dia
858
-
338910
... More
65 mm Dia
78
-
37128
... More
80 mm Dia
94
-
55460
... More
100 mm Dia
72
-
60336
... More
150 mm Dia
42
-
38178
... More
Providing wrought mild steel (galvanized) GI collar confirming to IS 1239-II, 1991 with latest amendments if any. 50mm Dia
143
-
25025
... More
65 mm Dia
13
-
2665
... More
80 mm Dia
15.6667
-
4308.34
... More
100 mm Dia
12
-
4140
... More
150 mm Dia
7
-
3325
... More
Supply and delivery at site wrought mild steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any. 50mm Dia
21
-
4935
... More
65 mm Dia
3
-
795
... More
80 mm Dia
3
-
1005
... More
100 mm Dia
2
-
820
... More
150 mm Dia
1
-
495
... More
Supply and delivery at site wrought mild steel (galvanized) GI Tee confirming to IS 1239-II, 1991 with latest amendments if any. 50mm Dia
21
-
4095
... More
65 mm Dia
3
-
735
... More
80 mm Dia
3
-
891
... More
100 mm Dia
2
-
830
... More
150 mm Dia
1
-
625
... More
Providing Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 80mm Dia
10
-
29000
... More
100 mm Dia
2
-
7600
... More
Providing & supplying of Nuts & Bolts as jointing material @ 1.4 Kg/Joint for valves
16.8
-
1267.06
... More
Providing & supplying of rubber insertion sheet (3mm) as packing material (0.3 Kg/Joint)
3.6
-
342
... More
Providing and laying of RCC pipes NP2 for culverts including pointing ends and fixing collars with cement morter 1:2 including cost of materials, labours, HOM complete as per specifications. Curing complete as per specifications.
220
-
85800
... More
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. Cutting in Cement concrete road surface
363.3525
-
401867.87
... More
Cutting in Asphalt road surface
25.245
-
13682.79
... More
Cutting in Macadam road surface
292.725
-
101282.85
... More
Earth work excavation for pipeline trenches including depositing on bank upto a lead of 10mtrs. Including shoring and strutting, danger lighting and using sight rails and doning roads at every 100. Mtrs. Wherever necessary as directed in the following Strata. In Ordinary/ Hard soil
3838.4775
-
1005681.1
... More
Refilling the pipeline trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm thick including disposing of the surplus earth with a lead of 200 m.
3454.6298
-
355826.87
... More
Providing and laying in position plain cement concrete of grade M 20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing complete as per specifications.
439.0875
-
2319699.26
... More
BORE WELL : Sinking borewell of 165 mm dia clear using super fast hydraulic Rig of capacity 300 PSIG & above 1100 CFM & above in all Strata including over burden fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of Rig and Supporting vehicle, crew charges and cost of consumable etc., complete including yield testing at the final depth with a minimum working of compressor for one hour 0.00 to 50.00 mtrs.
100
-
34700
... More
50.00 to 100.00 mtrs.
100
-
44200
... More
100.00 mtrs to 150 mtrs
60
-
27360
... More
Supply of ISI mark nominal bore plain end steel casing pipe grade of steel Fe410 of wall thickness confirming to IS 4270-2001 and latest amendments electrical resistance welded steel tube material and confirming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5 to 7m both ends threded confirming to IS 554 1985 one end fixed with socket confirming to IS 4270-2001 and the other end with screwed pipes all pipes shall be rejonably free from defects the tube shall rejonably streight and shoud be with ISI marking weighing 25.10kg/m (exclusive of all taxes and duties) Pieces include collar medium duty 175mm dia x 5.4mm thick 160mm for Casing purpose
12
-
11400
... More
Providing and laying at site of work MS casing cap as per IS1239 (part-II) 1982 with latest amendments with any for any dia Casing cap
2
-
200
... More
HUME PIPE PUMP HOUSE : Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. including breaking of clods complete as per specifications.
3.072
-
918.53
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications.
0.768
-
3948.29
... More
Providing and constructing granite / trap / basalt size stone masonry in foundation cement mortar 1:6, stone hammerd dressed in courses not less than 20 cms high, bond stones at 2 m. apart in each course including cost of materials, labour, curing complete as per specifications. KBS 5.1.13.
1.764
-
8481.31
... More
Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at 2m. apart in each course including cost of materials, labour, curing complete as per specifications.
1.764
-
10275.3
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 20mm and down size graded granite metal coarse aggregates @0.84cum and fine aggregtes @ 0.56cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick,well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.
0.588
-
3117.58
... More
RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 Mtr. With Wall thickness 65mm
2
-
32000
... More
Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,complete as directed by the Engineer in charge of the work.
2
-
3758
... More
Providing ruled pointing to coursed stone masonry with cement mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost of materials, labour, curing complete as per specifications.
5.04
-
710.64
... More
PUMPING MACHINERY WITH ACCESSORIES From P-BW-1 to P-100kl ELSR : Supply and delivery of Submersible pumpset of 150mm dia suitable for bore well and confirming to IS 8034 specifications with its latest amendments 3-phase, SS bowl and impeller with low volt moter with testing as per instructions of Engineer incharge of work Head: 168 mts and Discharge : 245 LPM
1
-
52023
... More
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.
265
-
38160
... More
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.63mm
1
-
300
... More
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments. 65mm
1
-
1355
... More
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. 65mm
1
-
1395
... More
Indoor Type: Supply installing testing and commissioning Common Controle Pannel consisting of the following incoming:1 No. set of phase indicating lamps with SFU of suitable rating 1 No. unlog Ammeter, 1 No. unlog volt merer 1No. With phase selector switch, isolating switch Outgoing for main electrical pump 1No, MCB 1No. DOL of S/D starter suitable for respective HP 1No., electrical protection like single phase preventor, under voltage over voltage under current over current and dry run protection suitable for the pump described above 1No. indoor type.6 to 15HP
1
-
13288
... More
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets.
1
-
450
... More
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box.
1
-
1025
... More
Galavanised Mild Steel Tubes: Supply and delivery of galvanized mild steel tubes heavy class (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover) 65mm (6m piece)
21
-
63882
... More
Labour charges for Erection, Electrification and commissioning works of Pump sets including aligning and balancing with all necessary erection of materials and labour including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges, tools and equipments etc., involved in the job. as per specifications, with testing of as per instructions of engineer in-charge of work
1
-
5650
... More
Labour charges for Erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc., complete. as per specifications, with testing of as per instructions of engineer in-charge of work.
1
-
1127
... More
Labour charges for Providing main connection from pole - PVC insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit, with all necessary materials and labour tools and equipments, as per specifications, with testing of as per instructions of engineer in-charge of work Size 3.5 x 6sqmtr
30
-
4200
... More
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.
30
-
3690
... More
Providing, Supplying and fixing LT cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc. with all necessary materials and labour tools and equipments as per specifications,with testing of as per instructions of engineer incharge of work 3 1/2 x 6sqmm
1
-
497
... More
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia.
1
-
3633
... More
PUMPING MACHINERY WITH ACCESSORIES From P-BW-2 to P-100kl ELSR : Supply and delivery of Submersible pumpset of 150mm dia suitable for bore well and confirming to IS 8034 specifications with its latest amendments 3-phase, SS bowl and impeller with low volt moter with testing as per instructions of Engineer incharge of work Head: 168 mts and Discharge : 245 LPM
1
-
52023
... More
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.
270
-
38880
... More
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.63mm
1
-
300
... More
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments. 65mm
1
-
1355
... More
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. 65mm
1
-
1395
... More
Indoor Type: Supply installing testing and commissioning Common Controle Pannel consisting of the following incoming:1 No. set of phase indicating lamps with SFU of suitable rating 1 No. unlog Ammeter, 1 No. unlog volt merer 1No. With phase selector switch, isolating switch Outgoing for main electrical pump 1No, MCB 1No. DOL of S/D starter suitable for respective HP 1No., electrical protection like single phase preventor, under voltage over voltage under current over current and dry run protection suitable for the pump described above 1No. indoor type.6 to 15HP
1
-
13288
... More
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets.
1
-
450
... More
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box.
1
-
1025
... More
Galavanised Mild Steel Tubes: Supply and delivery of galvanized mild steel tubes heavy class (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover) 65mm (6m piece)
22
-
66924
... More
Labour charges for Erection, Electrification and commissioning works of Pump sets including aligning and balancing with all necessary erection of materials and labour including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges, tools and equipments etc., involved in the job. as per specifications, with testing of as per instructions of engineer in-charge of work
1
-
5650
... More
Labour charges for Erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc., complete. as per specifications, with testing of as per instructions of engineer in-charge of work.
1
-
1127
... More
Labour charges for Providing main connection from pole - PVC insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit, with all necessary materials and labour tools and equipments, as per specifications, with testing of as per instructions of engineer in-charge of work Size 3.5 x 6sqmtr
30
-
4200
... More
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.
30
-
3690
... More
Providing, Supplying and fixing LT cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc. with all necessary materials and labour tools and equipments as per specifications,with testing of as per instructions of engineer incharge of work 3 1/2 x 6sqmm
1
-
497
... More
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia.
1
-
3633
... More
RISING MAIN From P-BW to P-50kl ELSR : Earth work excavatoin for water Supply & Sanitary lines, Electrical conduits either in pits or pipe line trenches (upto 600mm Trench width) as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing, using sight rails & boning rods at every 100 mm whevere necessary removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench, including backfilling the excavated earth to the extent required and utilising the remaining available excavated earth locally for the work. in the following strata classifications by Mechanical Means In Ordinary/ Hard Soil
1050
-
136500
... More
Providing murrum or gravel bedding for the pipe-line including watering and consolidation by punners etc. complete with all lead (in black cotton soil and rock reaches)
157.5
-
40792.5
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including, testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing) Upto 110mm dia, Coils shall be used. PE-80 (PN-10)= 75mm
1750
-
421750
... More
Supplying, laying, jointing, testing and commissioning of G.I.Pipes Informing to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excluding Cost of Specials) with Cuts and Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete (Contractor shall make his own arrangements for procuring water for testing) 65mm dia medium duty
100
-
47600
... More
Providing 80 mm dia Air valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any
3
-
8100
... More
Providing 80 mm dia Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.
2
-
5800
... More
Supply of bolt and nut with washers
14
-
1055.88
... More
Supply of rubber insertion sheet (3 mm)
3
-
285
... More
OVERHEAD TANK OF 1,00,000 LITRES CAPACITY MATERIALS FOR PIPE CONNECTION:Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of 1m/2.75m length, 80 mm dia as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them.For inlet pipe 80mm dia (2.75M piece)
10
-
28000
... More
For inlet pipe 80mm dia (1.0M piece)
6
-
7200
... More
For outlet pipe 150mm dia(1.0M piece)
3
-
5100
... More
For outlet pipe 150mm dia (2.75M piece)
4
-
19700
... More
For scour 80mm dia (2.75Mpiece)
4
-
11200
... More
For scour 80mm dia (1.0Mpiece)
3
-
3600
... More
For overflow 100mm dia (2.75Mpiece)
5
-
16785
... More
For overflow 100mm dia (1.0Mpiece)
4
-
5956
... More
150mm dia (1M piece)
3
-
5100
... More
150mm dia (2.75Mpiece)
3
-
14775
... More
Supplying and Fixing CI puddle flanges confirming to IS 7181-1986 with latest amendments in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc complete. 80mm dia (over flow, Inlet, one for future)
3
-
7941
... More
100mm dia (Scour)
1
-
3172
... More
150mm dia (Outlet)
1
-
4897
... More
Providing Heavy class 90� double flanged bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.80mm dia
3
-
1650
... More
100mm dia (scour)
1
-
678
... More
150mm dia
1
-
1000
... More
Providing Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.80mm dia
1
-
2900
... More
100mm dia
1
-
3800
... More
150mm dia
1
-
4900
... More
Providing Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 80mm dia
3
-
960
... More
100mm dia
1
-
420
... More
150mm dia
1
-
650
... More
Supply of rubber insertion sheet (3 mm)(0.3 kg/ joint)
38.4
-
3648
... More
Supply of bolt and nut with washers(1.4 kg/ joint)
179.2
-
13515.26
... More
CIVIL WORKS:Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. including breaking of clods complete as per specifications.Ordinary Soil
42.8412
-
12809.52
... More
Hard Soil
28.5608
-
12795.24
... More
Ordinary Rock
14.2804
-
20292.45
... More
Ordinary Soil for pipe
9.45
-
2475.9
... More
Providing and laying in position plain cement concrete of grade M 15 with OPC cement @ 240kgs, with 40mm and down size graded granite metal coarse aggregates @0.878cum and fine aggregtes @ 0.459cum machine mixed, concrete laid in layers not exceeding 15cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.
4.2841
-
22395.13
... More
Filling available excavated earth (excluding rock) in sides of foundations upto plinthin layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming afterwatering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as per specifications.
81.5783
-
16397.24
... More
Providing and laying Reinforced cement concrete of mix design of M30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges)
9.27
-
66623.49
... More
Providing and laying Reinforced cement concrete of mix design of M30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification for staging, columns and braces above ground level (exclusive of cost of steel and fabrication charges)
11.9534
-
153338.22
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification and giving satisfactory water proof test including construction joints wherever necessary as per the directions of the departmental Officers complete for ring beam, side walls, bottom dome or bottom slab, shell portion and bottom ribs (exclusive of cost of steel and fabrication charges and jointing materials)
26.4495
-
474689.18
... More
Providing and laying Reinforced cement concrete of mix design of M30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., completeas per design and specifications etc., complete for top rib and top dome or top slab (exclusive cost of steel and fabrication charges) C. Staging of 9m
3.4951
-
46750.46
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and /or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications.
6.1401
-
438532.08
... More
Providing and constructing RCC hexagonal ventilator finial for RCC over head tank the finial to be constructed with CC (M-20) proportion using 20mm and down size jelly with reinforcement using 6mm dia., M.S. rods 4 nos., for each of the pillars both ways for full width of doom at 12cm c/c, the ventilator to be of 0.45 M x 0.5 M size provided with 25mm x 25mm x 5mm M.S. frame welded with diamond mesh to its full width and depth fully covered with aluminium mosquito mesh finished smooth with CM 1:3 proportion to required shape and size and ornamental finish including two coats of anti-corrosive paint for frame and mesh and two coats of cement paint matching to over head tank etc., complete.
1
-
5687
... More
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and GLSR)
1
-
1818
... More
Providing and fixing enameled gauge plate 3 mm thick, 0.23 M wide with plastic float thick plastic indicator and flexible nylon wire etc., complete to 2.50M height. Enamel gauge plate 3.0m high
1
-
3382
... More
Labour charges for hoisting C.I. flanged pipes 2.75mtrs length inposition aligning the plumb and jointing for RCC over head tank80mm to 200mm
45
-
27360
... More
Providing 2 coats of Snowcem/Water-proof cement paint of approved colour and shade over one coat of primer including curing etc., complete for RCC over head tank.
349.2006
-
74379.73
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging.
1
-
11739
... More
Providing & fixing GI pipe railing of 32mm dia, GI pipe 'B' class in two rows of roof dome flat slab of landing of ELSR, including cutting, welding, threading, painting embedding in CC pillars with all lead and lifts etc., complete.
81.692
-
55468.87
... More
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete
4
-
12396
... More
Painting two coats on new concrete surface :Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces, with materials, labour complete as per specifications.
12.6
-
1033.2
... More
Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“ii) English or any local language Hyphen and the like not to be measured and paid for JJM LOGO
2808
-
1965.6
... More
SPIRAL STAIRCASE : Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. including breaking of clods complete as per specifications.In Ordinary Soil
4
-
1196
... More
In Hard Soil
4
-
1792
... More
In Ordinary Rock
4
-
5684
... More
Providing and laying in position plain cement concrete of grade M 15 with OPC cement @ 240kgs, with 40mm and down size graded granite metal coarse aggregates @0.878cum and fine aggregtes @ 0.459cum machine mixed, concrete laid in layers not exceeding 15cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.
0.6
-
3136.5
... More
Providing and laying Reinforced cement concrete of mix design of M30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges)
0.8602
-
6182.26
... More
Providing and laying Reinforced cement concrete of mix design of M30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification for staging, columns and braces above ground level (exclusive of cost of steel and fabrication charges) C. Staging of 12m
4.9875
-
63979.65
... More
Providing and laying Reinforced cement concrete of mix design of M30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., completeas per design and specifications etc., complete for top rib and top dome or top slab (exclusive cost of steel and fabrication charges) C.Staging of 12m
0.09
-
1203.84
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications.
0.7125
-
50887.46
... More
Providing 2 coats of Snowcem/Water-proof cement paint of approved colour and shade over one coat of primer including curing etc., complete for RCC over head tank.
97.3425
-
20733.95
... More
Filling available excavated earth (excluding rock) in sides of foundations upto plinthin layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming afterwatering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as perspecifications.
10.18
-
2046.18
... More
BULK FLOW METER: Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m. including breaking of clods complete as per specifications. In ordinary soil
4.725
-
1412.77
... More
In hard soil
4.05
-
1814.4
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications.
0.675
-
3470.18
... More
Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick,vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks,anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications.
3.798
-
21348.56
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons.
8.19
-
2137.59
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses cost of all materials, labour complete as per specificaitons
30.36
-
10929.6
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. TMT bars Fe 500
0.1519
-
10848.85
... More
Supply and delivery at site CIDE pipes ISI marked (Horizontal CIUDF) of 1 meter length, 150 mm Dia as per ISI 181/1986 with latest amendements if any, the flange should be drilled as per IS-1538/1936, the pipes should be ISI marking on them.80mm Dia
2
-
2400
... More
100mm Dia
2
-
2978
... More
150mm Dia
2
-
3400
... More
Supply and fixing of Horizontal Mechanical Woltman type hermetically sealed water meters with copper Glass register with IP 68 protection. The meter shall be removable mechanism type manufactured as ISO 4064-1 : 1993 with MID certification. The meters shall be capable of transmitting consumption data on daily basis to central server through GSM/GPRS. The meter interface unit shall be fitted to the meter without wire. The consumption data shall be collected, stored and analysed by data logger. The data logger should provide data like flow rate, total flow, consumption analyses, reverse flow, meter tampering, daily flow distribution, leakage detection. The data logger shall also send alarms on blocked meter, flow rate above limit, pressure below or above limits. 80mm Dia
1
-
63750
... More
100mm Dia
1
-
69200
... More
150mm Dia
1
-
82800
... More
VALVE CHAMBERS : Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m. including breaking of clods complete as per specifications. In ordinary soil
40.95
-
12244.05
... More
Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m. including breaking of clods complete as per specifications. In hard soil
35.1
-
15724.8
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications.
5.85
-
30074.85
... More
Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick,vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks,anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications.
32.916
-
185020.84
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons.
70.98
-
18525.78
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses cost of all materials, labour complete as per specificaitons
263.12
-
94723.2
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. TMT bars Fe 500
1.3166
-
94032.89
... More
Rehablitation of Existing 50KL OHT @RO Plant : Wateproofing of RCC Terrace / podium slab / toilet / utilities / water retaining structure by preparing the surface by chipping and cleaning and Grouting of Honey comb, voids, cracks / construction joints and slab joints with cement slurry (1kg cement added in 10 ltr of water) added with 100gm of inorganic accelerator, followed by spraying of liquid biological modified alkaline earth silicates @ 0.40 ltr per sqm on whole surface to reduce the micro porosity and allowing it to dry, curing the surface for the silicates to penetrate deeper into the concrete and spraying waterproofing impregnate liquid containg silane and silanol linear copolymer @ 0.50 ltr per sqm and finally applying polymer slurry made out of Cross linked Acrylic /styrene /butadiene & cement in the ratio of 1:0.1, @ the rate of 0.50kg/sqmtr on the whole surface, including all labour charges tools and equipments, all complete as per the specification
70.6825
-
40642.44
... More
Extra for Water proofing the inside surface of Tanks (OHT & UGT) - applying of modified polymers soft acrylic esters coat @ 0.40 kg/sqm in 2 coats including all labour charges tools and equipments, all complete as per the specification
70.6825
-
19437.69
... More
Providing 2 coats of Snowcem/Water-proof cement paint of approved colour and shade over one coat of primer including curing etc., complete for RCC over head tank.
179.0896
-
38146.08
... More
Providing and fixing MS ladder between landing 45cms wide using angle iron of following size and 20mm MS bars @25cms center to center with necessary supports of same angles iron as directed including hand railing on both sides with 25mm dia GI pipes with angle iron props @2m interval and 0.5m height including fixing in ground with CC 1:2:4 and 2 coats of nonpoisonous anti corosives bituminous paint with all lead and lift etc complete. 65x65x8mm angle iron frame
12
-
21852
... More
Ladder inside the container: providing a anodised aluminiun ladder using 65mm x32mm (Aprox) 'C' sectionx3.00mm for lader side channels and 25mm dia fluted pipe for Rungs at 250mm C/C Ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia G.I struts with necessary G.I fastners for bracking thje ladder to the Tank walls to prevent Buckling of the ladder with necessary bed for embedding the ladder bottom complete
4
-
12396
... More
Providing Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 80mm Dia
2
-
5800
... More
Supply of rubber insertion sheet (3 mm)(0.3 kg/ joint)
1.2
-
114
... More
Supply of bolt and nut with washers(1.4 kg/ joint)
5.6
-
422.35
... More
Rehablitation of Existing 50KL OHT : Wateproofing of RCC Terrace / podium slab / toilet / utilities / water retaining structure by preparing the surface by chipping and cleaning and Grouting of Honey comb, voids, cracks / construction joints and slab joints with cement slurry (1kg cement added in 10 ltr of water) added with 100gm of inorganic accelerator, followed by spraying of liquid biological modified alkaline earth silicates @ 0.40 ltr per sqm on whole surface to reduce the micro porosity and allowing it to dry, curing the surface for the silicates to penetrate deeper into the concrete and spraying waterproofing impregnate liquid containg silane and silanol linear copolymer @ 0.50 ltr per sqm and finally applying polymer slurry made out of Cross linked Acrylic /styrene /butadiene & cement in the ratio of 1:0.1, @ the rate of 0.50kg/sqmtr on the whole surface, including all labour charges tools and equipments, all complete as per the specification
70.6825
-
40642.44
... More
Extra for Water proofing the inside surface of Tanks (OHT & UGT) - applying of modified polymers soft acrylic esters coat @ 0.40 kg/sqm in 2 coats including all labour charges tools and equipments, all complete as per the specification
70.6825
-
19437.69
... More
Providing and laying Reinforced cement concrete of mix design of M30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification for staging, columns and braces above ground level (exclusive of cost of steel and fabrication charges
1.5374
-
19721.77
... More
Providing 2 coats of Snowcem/Water-proof cement paint of approved colour and shade over one coat of primer including curing etc., complete for RCC over head tank.
213.9321
-
45567.54
... More
Ladder inside the container: providing a anodised aluminiun ladder using 65mm x32mm (Aprox) 'C' sectionx3.00mm for lader side channels and 25mm dia fluted pipe for Rungs at 250mm C/C Ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia G.I struts with necessary G.I fastners for bracking thje ladder to the Tank walls to prevent Buckling of the ladder with necessary bed for embedding the ladder bottom complete
4
-
12396
... More
Providing Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 80mm Dia
1
-
2900
... More
100 mm Dia
1
-
3800
... More
Supply of rubber insertion sheet (3 mm)(0.3 kg/ joint)
1.2
-
114
... More
Supply of bolt and nut with washers(1.4 kg/ joint)
5.6
-
422.35
... More
REHABILITATION OF RISING MAIN: From Ex-BW to P-100kl ELSR:Earth work excavatoin for water Supply & Sanitary lines, Electrical conduits either in pits or pipe line trenches (upto 600mm Trench width) as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing, using sight rails & boning rods at every 100 mm whevere necessary removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench, including backfilling the excavated earth to the extent required and utilising the remaining available excavated earth locally for the work. in the following strata classifications by Mechanical Means
1080
-
140400
... More
Providing murrum or gravel bedding for the pipe-line including watering and consolidation by punners etc. complete with all lead (in black cotton soil and rock reaches)
162
-
41958
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including, testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing) Upto 110mm dia, Coils shall be used. 75mm Dia
1800
-
433800
... More
Supplying, laying, jointing, testing and commissioning of G.I.Pipes Informing to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excluding Cost of Specials) with Cuts and Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete (Contractor shall make his own arrangements for procuring water for testing) 65mm Dia
250
-
119000
... More
Providing 80 mm dia Air valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any. 80mm Dia
2
-
5400
... More
Providing 80 mm dia Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 80mm Dia
2
-
5800
... More
Supply of bolt and nut with washers
11.2
-
844.7
... More
Supply of rubber insertion sheet (3 mm)
2.4
-
228
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements