Rural Water Supply And Sanitation Department Tender

Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification.-Cutting Macadam Road Surface ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Cutting of cement concrete road surface for pipeline trenches with steel or without steel upto 300mm width and upto 200mm depth with neat finishing vertically as well as horizontally by using concreate cutting machine it includes minimum 2 lomgitude groove and sufficient number of laterl groove for avoiding damaging of other portion of Cement Concrete Road and disposing off the excavated stuff as directed including cost cutting machinary along with generator and fuel for running machine and all type of labour, including cutting blade, watering for smooth cutting, barricading, danger lighting etc. as per standerd specification ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. PVC PIPES OF 6 Kg./Cm2-63mm ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments -50mm ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments -50mm ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller) ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Giving hydraulic test for C.I. / R.C.C. / P.V.C. / H.D.P.E/ D.I/A.C. pipelines to the pressure equal to two times the working pressure including cost of supply of water. - upto 80mm ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. including breaking of clods complete as per specifications.-in ordinary soil ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick,vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks,anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier,cost of materials, labour, HOM of machinery complete as per specifications. -TMT bars Fe 500 ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Supply and installation of water connections to individual houses up to water meter point and (excluding civil works like earthwork excavation for the pipeline trenches and restoration work) for laying of MDPE/GI pipes of 15/20 mm dia for the house connection including water supply and laying of MDPE and GI pipes with special such as Electro fusion tapping ferrule or suitable diameter saddle (all size like 90/75/63 mm dia) of required pressure rating or higher grade of approved make confirming standard specification with brass cutter, flow regulator, water tight cap cutting edges for making hole/tapping suitable to HDPE distribution mains by electro fusion welding Tapping ferrules (mechanical type clamp saddle) including cost of water meter MDPE and GI pipes with all specials such as MDPE bend Adaptor saddle , GI tee, GI elbow, GI coupler, stopper and brass or ss tap etc complete including neat and water tight fitting and as directed by engineer in charge ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Supply and fixing of HDPE water meter box to protect the water meter of class 'B: multijet type of size 15 to 32mm including HDPE box with base dia 300mmxlid dia 200mmxheight 250mm with openable lid and the cover is buried below GL with lid flush with GL including earthwork excavation for 600mmx600mm and base sand filling for 100mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12 to 20mm BG jelly for an height of 150mm and refilling with excavated earth for balance 100mm height,disposal of excess earth with all lead and lifts etc complete as per drawing enclosed ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Providing nd consrtucting of stand post including water meter fixing as per provided estimate ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Providing and fixing to wall , ceiling and floor , medium density polythylene pipes 6.00 kgs/sq.cm working pressure of outside diameter with special flange , compression type fittings, wall clips, making good the wall ceiling and floor including cost of all material , labour charges, HOM and testing complete as per specification No. KBS 13.2.15.1 I 13.9 for internal water supply connection - 20mm dia ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Painting two coats on new concrete surface :Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces, with materials, labour complete as per specifications. MORTH Specification No 803 ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“ii) English and Roman - Hyphen and the like not to be measured and paid for “ MORTH Specification No. 803 ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used. PE100 (PN 10.0 / 10 Kg/cm2) -75mm ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Supply and fixing of single chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 50. All internal parts such as float, shell etc., all cover bolts of austenitic alloy / SS 304 steel, DN 50 float of HOSTAFLON / SS 304 and gaskers and seals of EPDM. Epoxy powder coating (EP-P) inside and outside colour bule RAL5005. The valves should be designed for all the three functions i.e., 1. Large orifice for venting of large air volumes on start up. 2. Large orifice for intake of large air volumes. 3. Small orifice for discharge of pressurized air during operation. Air valve PN-10 50mm ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Providing and laying cement concrete using 20 mm and down size granite coarse aggregates and fine aggregates of ready mixed concrete (RMC) M 25 for R.C.C works laid in 15 cms thick layers and well compacted vibrating, curing, for all super structure works, Flash mixers, Floculator, RSF, Raft of Zonal balancing Tanks, Raft of Master Blancing Tank, Raft of IPS/IMP, Side wall and Top Dome for GLSR's, Pure water sump etc.. ., including cost of all materials, labour, HOM of machinery, curing,complete but excluding cost of reinforcement as per specifications with all lead and lifts etc., complete (exclusive of cost of steel and fabrication charges.) ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of following size and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as directed including hand railing on both sides with 25mm dia G.I. pipes with angle iron props at 2 mtrs, interval and 0.5 mtr, height including fixing in ground with C.C. 1:2:4 and two coats of nonpoisonous anticorrosive bituminous paint with all lead and lift etc., complete. 65x65x8mm angle iron frame. ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces apart from water tanks, sumps, reservoirs, by mixing the composite waterproofing compound with water in ratio of 1:10 to make a workable slurry and pouring it on all cleaned and prepared corners and disturbed area and further mixing in the ration 1:20 and pouring it on the prepared surface by cleaning the surface with etchant chemical from dirt foreign materials etc.,and allowing it to be there upto 3 hours and then cleaning the same using water complete as per spcification so that the surface is got back and ready to use after 4 hours. ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.) ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Labour charges for making, fixing and testing of flanged joints for Cast Iron pipes / D.I. Pipes and specials with rubber insertion and necessary bolts and nuts and giving necessary hydraulic pressure test including conveying, loading and unloading the jointing materials etc., complete. a 80mm (64.00) ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Materials Providing 80 mm dia Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Materials Providing 80 mm dia Heavy class 90” double flanged bend confirming to IS 1538 (PartI to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Materials Providing 80 mm dia CI bank flange confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE

Materials Providing 80 mm dia Heavy class 45” double flanged bend confirming to IS 1538 (PartI to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. ---- WITH LEAD & LIFT COMPLETE AS PER THE DIRECTIONS OF ENGINEER IN CHARGE