Rural Water Supply And Sanitation Department Tender

Earth work excavation for water Supply & Sanitary lines, Electrical conduits either in pits or pipe line trenches (upto 600mm Trench width) as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing, using sight rails & boning rods at every 100 mm whoever necessary removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench, including backfilling the excavated earth to the extent required and utilising the remaining available excavated earth locally for the work. in the following strata classifications by Mechanical Means with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work... Ordinary Rock (without Blasting)

Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing) Coils shall be used. PE100 (PN 6.0 / 6 Kg/cm2). with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work.. 63mm dia

Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing) Coils shall be used. PE100 (PN 6.0 / 6 Kg/cm2). with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work.. 75mm dia

Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing) Coils shall be used. PE100 (PN 6.0 / 6 Kg/cm2). with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work.. 90mm dia

Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing) Coils shall be used. PE100 (PN 6.0 / 6 Kg/cm2). with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work.. 110mm dia

Supply and delivery at site of brand new HDPE Specials (TEE) as per techincal specifications etc.., complete as per the direction of Engineer incharge of work. 63mm

Supply and delivery at site of brand new HDPE Specials (TEE) as per techincal specifications etc.., complete as per the direction of Engineer incharge of work. 75mm

Supply and delivery at site of brand new HDPE Specials (TEE) as per techincal specifications etc.., complete as per the direction of Engineer incharge of work. 90mm

Supply and delivery at site of brand new HDPE Specials (ELBOW) as per techincal specifications etc.., complete as per the direction of Engineer incharge of work. 63mm

Supply and delivery at site of brand new HDPE Specials (ELBOW) as per techincal specifications etc.., complete as per the direction of Engineer incharge of work. 75mm

Supply and delivery at site of brand new HDPE Specials (ELBOW) as per techincal specifications etc.., complete as per the direction of Engineer incharge of work. 90mm

Supply and delivery at site of brand new HDPE Specials (Reducer) as per techincal specifications etc.., complete as per the direction of Engineer incharge of work. 63mm

Supply and delivery at site of brand new HDPE Specials (Reducer) as per techincal specifications etc.., complete as per the direction of Engineer incharge of work. 75mm

Supply and delivery at site of brand new HDPE Specials (Reducer) as per techincal specifications etc.., complete as per the direction of Engineer incharge of work. 90mm

Supply and delivery at site of brand new HDPE Specials (Flange) as per techincal specifications etc.., complete as per the direction of Engineer incharge of work. 80mm MS. Flange

Supply and delivery at site of brand new HDPE Specials (Coupler) as per techincal specifications etc.., complete as per the direction of Engineer incharge of work. 63mm

Supply and delivery at site of brand new HDPE Specials (Coupler) as per techincal specifications etc.., complete as per the direction of Engineer incharge of work. 75mm

Supply and delivery at site of brand new HDPE Specials (Coupler) as per techincal specifications etc.., complete as per the direction of Engineer incharge of work. 90mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work. 50mm dia

Providing Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work. 80mm dia

Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABL accredited lab. The water meters shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointer of the meter shall be as per ISO 4064 class B specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work. 100mm dia

Providing and laying in position plain cement concrete of mix M15 with OPC cement @ 240kgs, with 40mm and down size graded granite metal coarse aggregates @0.878cum and fine aggregtes @0.453cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work.

Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller) with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work.

VALVE & BULK FLOW CHAMBER: Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. including breaking of clods complete as per specifications. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick,vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks,anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications.

Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications TMT bars Fe 500 with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

Providing 15mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost of materials, labour, curing complete as per specificationsh ISI mark with its latest amendments. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

New FHTCs Connections :: Supply and installation of water connections to individual houses up to water meter point (which shall be fixed about one meter from customer boundary) and includes civil works like Earthwork excavation for the pipeline trenches for laying of MDPE /GI pipes of following diameters for the house connection in all types of soils, disintegrated rock, soft rock, hard rock, including cutting of any road using machine cutter, crossing drains, compound, cutting any surfaces along the pipelines such as tiles /floor/concrete/or any other surfaces using machine cutter, boring the wall surfaces comprising of BBM or SSM for conveying the pipelines to customer property, restoring the damaged portions inside or outside the property premises, refilling etc. Complete supply and laying of MDPE PE80, PN 12.5 pipes with special such as Electro fusion tapping ferrule or saddles of pressure rating PN12.5/SDR 11 or higher grade of approved make conforming standard specifications with brass cutter, flow regulator, water tight cap-cutting edges for making hole/tapping suitable to HDPE distribution mains by electro fusion welding. Tapping ferrules(Mechanical type clamp saddle) with cost of GI pipes, all specials such as GI tee, GI elbow, GI coupler, stopper etc, and brass or SS tap for the following diameters with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work.. 15 mm dia.

Providing and fixing water meter with stop cock, jam, nut socket in G.I. pipe line including cutting and threading the pipe and making long screws including cost of materials, labour and HOM and testing complete with all leads complete as per specifications No. KBS 13.2.19/13.16 with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

Supply and fixing of HDPE water meter box to protect the water meter of class 'B: multijet type of size 15 to 32mm including HDPE box with base dia 300mmxlid dia 200mmxheight 250mm with openable lid and the cover is buried below GL with lid flush with GL including earthwork excavation for 600mmx600mm and base sand filling for 100mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12 to 20mm BG jelly for an height of 150mm and refilling with excavated earth for balance 100mm height,disposal of excess earth with all lead and lifts etc complete as per drawing enclosed. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

STAND POST : Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. including breaking of clods complete as per specifications. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

Providing and laying in position plain cement concrete of grade M 15 with OPC cement @240kgs, with 40mm and down size graded granite metal coarse aggregates @0.878cum and fine aggregtes @ 0.459cum machine mixed,concrete laid in layers not exceeding 15 cms.thick, well compacted,in foundation, including cost of all materials,labour, HOM of machinery,curing complete as per specifications. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick,vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks,anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications TMT bars Fe 500. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

Providing 15mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost of materials, labour, curing complete as per specificationsh ISI mark with its latest amendments. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

Providing and applying painting in two coats with plastic emulsion paint of approved brand and wall surface to give an enen approved shade after throughly brushing the surface, free from mortar drops and other forign matter including preparatin the surface even and sand paper smooth, cost of materials labour, complete as per specification with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work

KSRRB M800-10.Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications (ii) English and Roman-Hyphen and the like not to be measured and paid for MORTH Specification No 801. with all lead and lifts, loading and unloading etc., complete as per the direction of the Engineer-in-charge of work