Rural Water Supply And Sanitation Department Tender
... More
The RWSS has issued a formal invitation for competitive bids for the Rural Water Supply And Sanitation Department project, for Providing Fhtc's To 543 Households In Diddagi Habitation Of Diddagi Village, Sindhanur Taluk Raichur District By Augmentation Of Svs To Diddagi Village In Raichur District (40 Lpcd): in Raichur, Karnataka, with an estimated contract value of Rs. 1,51,15,423. The bid opening date for this tender is 14-05-2021 and the last date for bid submission is 27-05-2021. Interested bidders for Rural Water Supply And Sanitation Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RWSSD/2021-22/WS/WORK_INDENT33712Bid Award Id
ViewTender No
RWSSD/2021-22/WS/WORK_INDENT33712Tender Authority
Rural Water Supply And Sanitation Department ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs,with 20mm and down size graded granite metal coarse aggregates @0.84cum and fine aggregtes@ 0.56cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick,well compacted,in foundation,plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1.32
-
7506.58
... More
Providing flush pointing to square rubble, course or uncoursed stone masonry with cement mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost of materials, labour, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
6.63
-
981.57
... More
PP Make Adopter suitable for a Pressure Rating PN16 20 x 20 mm dia Adopter (Both side adopter ) 20x15mm ( �inch) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
555
-
58941
... More
Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at2 m. apart in each course including cost of materials, labour, curing etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
5.48
-
33712.69
... More
Filling available excavated earth ( excluding rock ) in sides of foundations upto plinthin layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming afterwatering with lead upto 50 m. and lift upto 1.5 m. etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
4.6
-
970.83
... More
Providing pervious casing embankment with soil form approved dump areas in layers of 250mm 300mm before compaction including cost of all materials, machinery labour, all other operations such as Re- excavation sorting out transportation, spreading in layers of specified thickness, breaking clods, serectioning, watering to optimum moisture content compacting to density control of not less than 95 percent using vibratory pad foot roller with all lead and lift loading & umloading & labour charges etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2499.75
-
189981
... More
Providing 150 mm dia Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
10290
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1
-
10127.25
... More
Providing and laying Reinforced cement concrete of mix design of M-20 Grade with cement @ 320 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @ 0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 machine mixing,laid in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary as per design and specifications etc., complete for RCC roof slab,top dome,ring beam of all spans etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.98
-
9689.06
... More
Supplying,laying,jointing ,testing and commissioning of 32 mm dia G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excluding Cost of Specials) with Cuts and Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete (Contractor shall make his own arrangements for procuring water for testing) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
304.5
-
89842.72
... More
Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
8
-
1747.2
... More
Providing and fixing top covers made out of 20 guage M.S. sheet over pull and push rolling shutters bent to shape including cost of red lead primer coat of painting , materials, labour, HOM of machinery etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1.2
-
607.32
... More
Refilling the excavated stuff in layers of 15cms thick including watering and consolidation etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2.57
-
531.6
... More
Providing and laying in position reinforced cement concrete of Design mix M25 with OPC cement @ 340kgs, with 20mm and down size graded granite metal coarse aggregates@0.70 cum and fine aggregtes @ 0.47cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed- 2008 at machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks,anchor blocks & plinths,etc.. ., including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2.57
-
16093.34
... More
Supplying, and Fixing 150mm dia CI puddle flanges confirming to IS 7181-1986 with latest amendments in position for RCC walls including hoisting and conveying them to work spot etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
10277.4
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials , labour, HOM of machinery etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.1
-
7499.21
... More
Providing and laying in position reinforced cement concrete of Design mix M30 with OPC cement @ 360kgs, with 20mm and down size graded granite metal coarse aggregates @0.69 cum and fine aggregtes @ 0.46 cum, with super plasticisers @ 1% by wt. of cement, confirming to IS 9103-1999 reafirmed-2008 at machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works Bottom Raft, RCC Raft of Flash mixers, Floculator, RSF, Raft of Zonal balancing Tanks, Raft of Master Blancing Tank, Raft of IPS/IMP, Side wall and Top Dome for GLSR's, Pure water sump etc.. ., including cost of all materials, labour, HOM of machinery, curing, etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
20.64
-
130317.24
... More
Providing FHTC's to 543 households in Diddagi habitation of Diddagi Village, Sindhanur Taluk Raichur District by augmentation of SVS to Diddagi village in Raichur District (40 LPCD): DISTRIBUTION SYSTEM :- Earthwork excavation for pipe line tenches including depositing on banks upto a lead of 50 mts and depth up to 2.0 mts including shoring and strutting ,danger lighting and sight rails and boning rods at every 100 mts.Wherever necessary as directed in Ordinary Soil by Manual Means etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1138.31
-
313149.08
... More
-do- 110 mm dia PVC service saddles
30
-
5700
... More
Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at2 m. apart in each course including cost of materials, labour, curing etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
5.48
-
33712.69
... More
Providing and consutructing 300 mm thick dry size stone pitching using 200 to 300 mm size stone with pin headder @ 2 per sqm including cost of all materials , machinery, labour,laying to specified slope, wedging with chips,finishing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
3925
-
1118625
... More
Providing 150 mm dia Duck foot bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
1600
... More
Providing minimum or gravel bedding for the pipe line including watering and consolidation by punners etc.complete with all lead and lift (in black cotton soil and rock reaches ) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
16.02
-
4356.64
... More
PUMPHOUSE 3.00 mtr x 3.00 mtr :-Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. including breaking of clods etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
11.63
-
5470.75
... More
Supply and delivery at site of brand new 150mm dia best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
3150
... More
-do- 90 mm dia PVC service saddles
33
-
5280
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., completeas per design and specifications etc., complete for top rib and top dome or top slab etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
3.96
-
56981.91
... More
Providing and fabricating MS / HYSD (Tor steel )reinforcement confirming to IS 226/1786 of 1966 with latest amendments including cleaning, straightening, cutting, bending, hooking, lapping or welding wherever required, hoisting and placing in position and tying with binding wire of approved quality & 16 gauge as per design & drawing with all leads and lifts for all staging including cost of materials & labour etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.31
-
23247.54
... More
-do- 90mm dia PE100 PN 6.0 / 6 Kg/cm2
504
-
111132
... More
-do- 75 mm dia PVC service saddles
89
-
10680
... More
-do- 80mm dia
22
-
45460.8
... More
-do- 110 mm dia PVC service saddles
41
-
7790
... More
Providing 150 mm dia Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
9800
... More
Labour charges for Erection, Electrification and commissioning works of Pump sets including aligning and balancing with all necessary erection of materials and labour including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges, tools and equipments etc., involved in the job. as per specifications, with testing of as per instructions etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
11300
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
4.91
-
368210.97
... More
Providing and laying in position reinforced cement concrete of Design mix M25 with OPC cement @ 340kgs, with 20mm and down size graded granite metal coarse aggregates@0.70 cum and fine aggregtes @ 0.47cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed2008 at machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks,anchor blocks & plinths, etc.. ., including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1.37
-
8580.17
... More
DISINFECTION :- Generation and dosing of 35 liter of hypochlorite per batch of 8 hours Providing of Batch type Disinfectant system (Electro – Chlorinators / Chlorine Generators) with required accessories for dosing the Sodium Hypochlorite solution suitable to control feed rate and the Electro-chlorinator and dosing system confirming to the following specification. The system should generate the sodium hypochlorite solution on site utilizing only food grade salt, water and electric power and dose the produced sodium hypochlorite solution at the rate of 2.0 - 1.8 ppm and as per enclosed drawing. a)The unit shall include the following accessories(i)Generator Module (Electrolyser)-Will be floor standing and will consist of one single common tank with stand for brine preparation and hypochlorite production fitted with a bipolar electrode for converting the brine into hypochlorite solution by the process of electrolysis in the same tank. Shall have arrangement for acid cleaning and draining of electrolytic cell (ii) FRP Storage Tank-Will be of 40 Liters capacity (iii)Power Cables The D.C. Power cables for interconnection between the generator and D.C. control module will be supplied for wiring at site (iv) D.C. control module-Will be floor standing type and shall be suitable to provide D.C. current of 25 amps for the required production capacity of the plant to work on 230V, 50Hz single phase A.C. supply. It will be of full wave type with facility to vary the current from 0 to full value. The rectifier shall have indication for power on process-on, overload, over voltage with intelligent timer and reverse polarity system etc.(v)Metering-cum-Dosing Pump-Dosing pump shall be suitable to control feed rate. Generation capacity : 800 grams / Batch (8 hours), Generator Module : 500 mm x800 mm, Nacl storage chamber : 1 litres, MOC of Generator : Fiber glass, Naocl storage : 500 mm x 500 mm, MOC of Naocl storage : Fiber glass, Digital flow meter : 1 No (to monitor the flow), Generation modules : Cylindrical, Length of Electrode : 200 mm mesh, Dia of Electrode : 50 mm, Separator : 200 mmX38 mm, Cathode : 200 mmX25mm, Electrical cable : Dosing system : Mechanically actuated diaphragm type to dose sodium hypochlorite mounted on storage tank, Water supply plumbing : i. Connection to salt chamber : 20 mm with required valves, ii. Outlet for Naocl : 20 mm with ball valve
1
-
127155
... More
Providing 150 mm dia Duck foot bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
1680
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials , labour, HOM of machinery etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.1
-
7499.21
... More
CONSTRUCTION OF RCC VALVE CHAMBER 1.0 m x1.0 m 2 Nos: Earthwork in surface excavation in ordinary soil for levelling and lowering the ground manually (other than foundation of buildings, culverts, road drains and trenches of pipe lines and cables) and removing the excavated stuff to a distance not exceeding 50m and lift upto 1.5m, excavated surface levelled and neatly dressed, disposed earth to be levelled after breaking of clods and neatly dressed etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
10.58
-
2766.14
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs,with 20mm and down size graded granite metal coarse aggregates @0.84cum and fine aggregtes@ 0.56cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick,well compacted, in foundation,plinth and cills etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
3.2
-
18308.86
... More
Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs,with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes@ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted,in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.16
-
916.8
... More
-do- Ordinary Rock (without blasting)
17.76
-
1249.42
... More
Providing Murrum or gravel bedding for the pipe line including watering and consolidation by punners etc.complete with all lead and lift (in black cotton soil and rock reaches ) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
13.66
-
3714.84
... More
-do- Cutting in Macadam road surface
23.63
-
8584.78
... More
INTAKE STRUCTURE FOR CANAL:- Earth work is excavation for foundation of structures by mechnical means as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing, removal of slumps and other deleterious matter, dressing of the sides and leveling the bottum of trench to the extent required, utilising the available excavated earth locally for the work etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
4.5
-
391.5
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing) 140mm dia PE80 (PN 10.0 / 10 Kg/cm2) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
100
-
73500
... More
-do- 140mm dia PE100 PN 6.0 / 6 Kg/cm2
538
-
254769.9
... More
Earth work excavatoin for water Supply & Sanitary lines, Electrical conduits either in pits or pipe line trenches (upto 600mm Trench width) as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing, using sight rails & boning rods at every 100 mm whevere necessary removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench, including backfilling the excavated earth to the extent required and utilising the remaining available excavated earth locally for the work. in the following strata classifications by Mechanical Means In Ordinary soil etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
491.4
-
67076.1
... More
Providing and fixing to wall, ceiling and floor, 20mm dia medium density polyethylene pipes 6.00 kgs/sq.cm working pressure of outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM and testing complete as per specifications.
3441
-
386596.35
... More
Supplying and fixing of HDPE Water meter box to protect the water meter of class "B" Multijet type of size 15 to 32 mm including HDPE box with base dia.300 mm x lid dia 200 mm x height 250 mm with openable lid and the cover is buried below GL with GI including earth work excavation for 600 mm x 600 mm and base sand filling for 100 mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12-20mm BG jelly for an height of 150 mm thick and refilling with excavated earth for balance 100 mm height, disposal of excess earth with all lead and lifts etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
406
-
213150
... More
Supplying,,laying of 150mm dia CI flanged pipe true to line/hoisting of CI flanged pipe confirming to IS 7181-1986 with latest amendments in position and aligning to correct plumb including cost of jointingmaterial,conveying to work spot with all lead and lifts etc complete
8
-
30710.4
... More
-do-100 mm dia
5
-
56899.5
... More
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
900
... More
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1
-
3814.65
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2.58
-
193479.49
... More
Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of following size and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as directed including hand railing on both sides with 25mm dia G.I. pipes with angle iron props at 2 mtrs, interval and 0.5 mtr, height including fixing in ground with C.C. 1:2:4 and two coats of nonpoisonous anticorrosive bituminous paint with all lead and lift etc., complete. 65x65x8mm angle iron frame etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
22.5
-
43021.12
... More
Providing, supplying to work site, fixing of Submersible Pump Set suitable for floting Deck and confirming to IS 8034 3Phase, SS Bowl & Impeller with Low volt Motor and as per specifications, with testing, as per instructions of engineer incharge of work and latest amendmnents 5 HP, size 65x50 Head 46M, Discharge 360 LPM etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
38752
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs,with 20mm and down size graded granite metal coarse aggregates @0.84cum and fine aggregtes@ 0.56cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick,well compacted, in foundation,plinth and cills etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
3.31
-
18938.23
... More
-do- 200 mm dia Air valve
1
-
4725
... More
Providing and fixing pull and push type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel laths by means of alternate clips, suspension shaft with High tension coil type springs two numbers, mounted on specially designed pipe shaft, with bracket plates, guide channels, ball bearing arrangements, for inside & outside locking with push & pull operations complete including pulling hooks, 4Nos. handles with all fittings and accessories painted with a coat of red lead paint (without top cover) cost of materials, labour, HOM of machinery complete as per specifications. Shutter size 3mx2.8 m etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1.89
-
5173.59
... More
PROVIDING FUNCTIONAL HOUSE TAP CONNECTIONS (555 No's):- Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in Cutting Cement Road Surface etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
21.87
-
25397.63
... More
Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs,with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes@ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted,in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.16
-
912.41
... More
Supplying HDPE pipes 200mm dia PE 80 PN 6.0 / 6 Kg/cm2 conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
100
-
87780
... More
Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
149.85
-
16206.28
... More
Providing and laying Reinforced cement concrete of mix design of M-20 Grade with cement @ 320 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @ 0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 machine mixing,laid in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary as per design and specifications etc., complete for RCC roof slab,top dome,ring beam of all spans etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.98
-
9717.01
... More
CONSTRUCTION OF GLSR OF 100 KL CAPACITY :Earth work in excavation of foundation of structures upto 3 m depth as per drawing and technical specification, including setting out, providing shoring,strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising /transporting the remaining earth upto 1.00km lead etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
71.05
-
3879.33
... More
CONSTRUCTION OF RCC VALVE CHAMBER 1.0 m x1.0 m 2 Nos: Earthwork in surface excavation in ordinary soil for levelling and lowering the ground manually (other than foundation of buildings, culverts, road drains and trenches of pipe lines and cables) and removing the excavated stuff to a distance not exceeding 50m and lift upto 1.5m, excavated surface levelled and neatly dressed, disposed earth to be levelled after breaking of clods and neatly dressed etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
10.58
-
2766.14
... More
RETRO FIITTING FOR CONVERTING HHC TO FHTC (406 No's):- Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in Cutting Cement Road Surface etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
16.07
-
18662.09
... More
Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1138.31
-
123108.23
... More
Flow control Valve 10 LPM : Providing, & fixing Flow control valve using food grade materials SS 316 ball / 1/2 " [15mm] including cost of all materials, labour charges, HOM and testing complete as per of following specification. The FCV nominal design is for 10Ltr/Min. Discharges at 0.5 bar pressure loss and should not exceed the flow the range of 7 Lit /Min at 1 bar or more pressure. MOC of valve - Food grade stainless steel SS-316. MOC of Ball stainless steel-316. Flow direction arrow embossed on its outside surface. The Valve should act as flow control valve and non- return valve. Minimum operating pressure- 0.1 kgf( 10 cm head). Designed pressure: 1 meter to 50 meters. Accuracy of valves: + 20% of average flow rate. Orifice size: not be less than 12mm. Ball size: not less than 12 mm. Weight of FCV: not less than 125 gms .Length: not be less than 70 mm.The FCV is with internal arrangements of very simple passage in line such that the valve will pass the small floating particles if any entered in the valve to avoid choking. The FCV shall be got tested from FCRI by the manufacturer as per above standards, The quantum of checking to be done from FCRI is attached herewith. The FCV should be fitted on Saddle, which is fixed on distribution pipeline etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
555
-
183372
... More
-do- 75 mm dia PVC service saddles
76
-
9120
... More
Providing and constructing granite / trap / basalt size stone masonry in foundation with cement mortar 1:6, stone hammerd dressed in courses not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
83.59
-
424804.38
... More
Supplying,,laying of 150mm dia CI flanged pipe true to line/hoisting of CI flanged pipe confirming to IS 7181-1986 with latest amendments in position and aligning to correct plumb including cost of jointingmaterial,conveying to work spot with all lead and lifts etc complete
26
-
99808.8
... More
IMPOUNDING RESERVOIR:- Exacavation in all kind of soil including boulders up to 0.6 m diameter (0.133 cum) for canal,seating of embackment ,filter drains, catch water drains etc.,including dressing bed and sides to required levelk and profilecost of all materials, machienary, labour placing the excavated soil neatly in dump area or for formation of service road/ embankment as directed ect., complete with initial lead up to 1 km and depth or cut up to 18 m. etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2499.75
-
214978.5
... More
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1
-
1025
... More
Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete, using broken granite metal of 12.5mm nominal size and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide ( using 3.5 kg of red oxide per 50 kg of cement ) finished with floating coat of neat cement mixed with red oxide ( mix of same roportion), including cost of materials, labour, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
9
-
6189.75
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1
-
12264
... More
-do- 80mm dia
2
-
735
... More
Providing and Fixing Plastic Sintex tank of size 0.60 x 0.60 x 0.495 m for floting Platform etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
9
-
8013.6
... More
Providing and laying in position plain cement concrete of grade M 15 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @0.878cum and fine aggregtes @0.53cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.47
-
2756.06
... More
Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
142.83
-
818418.76
... More
-do-150 mm dia
3
-
59739.75
... More
Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 5.0Newton per sqmm (table moulded) with cement mortar 1:6 for basement and superstructure including cost of materials, labour charges, scaffolding, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
7.53
-
52538.69
... More
Fabrication supply, erection testing and commissioning of sliding type verticle gale consisting of skin plate,horizontal and vertical stiffeners seal seat sponge rubber seals lifting handels ect., with all accessories fur vented dam/ field channel including cost of all materials ,lobourcutting,aalying two coat of anti corrosive bituminous black paint cover a coat of zinc chromate red oxide primer paint seal fixing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
75
-
13072.5
... More
Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
43.52
-
249370.47
... More
Supplying HDPE pipes 63mm dia PE100 PN 6.0 / 6 Kg/cm2 conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2576
-
351624
... More
Supplying,laying,jointing ,testing and commissioning of 32 mm dia G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excluding Cost of Specials) with Cuts and Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete (Contractor shall make his own arrangements for procuring water for testing) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
416.25
-
122814.56
... More
Flow control Valve 10 LPM : Providing, & fixing Flow control valve using food grade materials SS 316 ball / 1/2 " [15mm] including cost of all materials, labour charges, HOM and testing complete as per of following specification. The FCV nominal design is for 10Ltr/Min. Discharges at 0.5 bar pressure loss and should not exceed the flow the range of 7 Lit /Min at 1 bar or more pressure. MOC of valve - Food grade stainless steel SS-316. MOC of Ball stainless steel-316. Flow direction arrow embossed on its outside surface. The Valve should act as flow control valve and non- return valve. Minimum operating pressure- 0.1 kgf( 10 cm head). Designed pressure: 1 meter to 50 meters. Accuracy of valves: + 20% of average flow rate. Orifice size: not be less than 12mm. Ball size: not less than 12 mm. Weight of FCV: not less than 125 gms .Length: not be less than 70 mm.The FCV is with internal arrangements of very simple passage in line such that the valve will pass the small floating particles if any entered in the valve to avoid choking. The FCV shall be got tested from FCRI by the manufacturer as per above standards, The quantum of checking to be done from FCRI is attached herewith. The FCV should be fitted on Saddle, which is fixed on distribution pipeline etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
406
-
134142.4
... More
FILTRATION :- Providing of Multi-grade Pressure Filter with required accessories for connecting the filter to rising main with a maximum / minimum operating pressure of 3.5 Kg/ cm2 to 2.0 Kg / cm2 respectively and confirming to the following specifications: to filter water containing 50 ppm of suspended solids to produce a filtrate with less than 5 ppm of suspended solids. a) The vertical cylindrical shell with dish ends made up of mild steel confirming to IS 2062 fabricated of plate thickness 5 mm and dish end thickness 5 mm the inner surface of M.S. Shell should be provided with epoxy paint , the raw material confirming to FDA standards. Protective coat of red oxide primer and enamel paint as per IS – 14209 for outer surface of the M.S. Shell should be provided. b) The following accessories should be provided with the pressure filter: i. One suitable set of laterals and header and bell mouth for water distribution and collection system.ii. One initial charge of , filter media and under bed material with one set of suitable frontal pipe work and valves and pressure gauges to monitor the pressure loss across the filter operated manually as per the specifications below c) The pressure filter unit is designed for the following specification: c) The pressure filter unit is designed for the following specification: : , Working pressure : 1.5 Kg / Cm2 to 3.5 Kg / cm2, Filter vessel dia : 1600 mm, HOS : 1875 mm, Frontal pipeline : 80 mm, Valves : Butterfly valves, SShell thickness : 6 mm, Dish end thickness : 8 mm, Filter media : Silex Silica sand, Pressure relief valve : 1 no 20 mm, Pressure gauge : 2 nos 150 mm dial, MOC of vessel : MS IS 2062 with Epoxy food grade inside,
1
-
301350
... More
Providing and fixing to wall, ceiling and floor, 20mm dia medium density polyethylene pipes 6.00 kgs/sq.cm working pressure of outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM and testing complete as per specifications.
2517.2
-
282807.42
... More
Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and boning rods at every 100 mtrs. Wherever necessary as directed in the following strata. (Manual Means) In Ordinary Soil etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
109.62
-
30156.46
... More
Providing, supplying to work site, fixing of Submersible Pump Set suitable for floting Deck and confirming to IS 8034 3Phase, SS Bowl & Impeller with Low volt Motor and as per specifications, with testing, as per instructions of engineer incharge of work and latest amendmnents 5 HP, size 65x50 Head 46M, Discharge 360 LPM etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
38752
... More
PP Make Female Threaded 20 mm dia Elbow with SS304/ Brass/Plastic inserts suitable for a Pressure Rating PN16 (FTE 90 deg ) 20x15mm etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1665
-
166999.5
... More
Supply and delivery at site special moulded variety 63 mm dia PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
392
-
35280
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
102.38
-
7677.48
... More
Providing and laying in position plain cement concrete of grade M 15 with OPC cement @ 240kgs, with 40mm and down size graded granite metal coarse aggregates@0.878cum and fine aggregates @ 0.459cum machine mixed, concrete laid in layers not exceeding 15 cms. thick,well compacted,in foundation, including cost of all materials,labour, HOM of machinery,curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1.45
-
8218.19
... More
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting in Cutting in Cement concrete road surface etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
137.57
-
159760.04
... More
WATER TREATMENT PLANT WITH LAMELLA CLARIFIER :- W ater treatment plant for the flow rate of 30000 LPH ( 0.48 M.L.D ) with 16 hour pumping Design parameter-Supply installation and commissioning of the water treatment plant capable to treat the water and make it potable at the flow rate of 30000 LPH with suspended solids level less than 2000 ppm, and PH value and biological impurities beyond permissible limits of potable water parameters. COAGULENT DOSING SYSTEM Supply, Delivery, Installation and Commissioning of Agitator & Coagulant Dosing System with required accessories etc. complete for connecting to rising main and including the cost of vessel, stirrer, storage tank and dosing system and also the cost of lead, lift and labour and maintenance of the equipments during the defect liability period of 12 months and confirming to the following specifications and as directed by Engineer - In- Charge: Agitator MOC of Flash mixer Vessel and Storage : FRP/Hdpe, Capacity of vessels : 1000 liters, Diameter of mixing vessel : 1080 mm, Height of mixing vessel : 1205 mm, Stirrer with motor : 1 No, MOC of stitter and shaft : SS 304, Coagulant dosing System Type of dosing pump : Mechanically actuated diaphragm type with drive motor, MOC of dosing pump head : P.P., MOC of diaphragm : P.T.F.E., MOC of gear housing for pump : C.I. (powder coated), MOC of pump and base : M.S. powder coated, MS Stand : 1 no (To mount the dosing system), Polymer dosing System Type of dosing pump : Differencial doasing system, Capacity of vessels : 300 liters, Stirrer with motor : 1 No, MOC of stitter and shaft : SS 304, MS Stand : 1 no (To mount the dosing system),
1
-
183750
... More
Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1.68
-
181.69
... More
-do- Ordinary Rock (without blasting)
12.82
-
901.89
... More
Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications.(“ii) English and Roman - Hyphen and the like not to be measured and paid etc., complete. 65x65x8mm angle iron frame etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
3000
-
2220
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.56
-
3106.28
... More
Providing and fixing in position brass bib cock of approved quality nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
555
-
105450
... More
Providing and constructing RCC hexagonal ventilator finial for RCC over head tank the finial to be constructed with CC (M-20) proportion using 20mm and down size jelly with reinforcement using 6mm dia., M.S. rods 4 nos., for each of the pillars both ways for full width of doom at 12cm c/c, the ventilator to be of 0.45 M x 0.5 M size provided with 25mm x 25mm x 5mm M.S. frame welded with diamond mesh to its full width and depth fully covered with aluminium mosquito mesh finished smooth with CM 1:3 proportion to required shape and size and ornamental finish including two coats of anti-corrosive paint for frame and mesh and two coats of cement paint matching to over head tank etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1
-
5989.2
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
8.34
-
46261.4
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification and giving satisfactory water proof test including construction joints wherever necessary as per the directions of the departmental Officers complete for ring beam, side walls, bottom dome or bottom slab, shell portion and bottom ribs etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
19.35
-
370431.95
... More
Supply and delivery at site special moulded variety 63 mm dia PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
251
-
22590
... More
FLOTING PLATFORM AND PUMPING MACHINERY :- Fabricating, supplying & erecting M.S. Angular Truss for all spans as per approved designs and drawing. The entire truss is anchored suitably by using 4 Nos. of M.S. anchor bolts at each support, with base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S angle and welding wherever necessary, and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, & hire charges of machineries for cutting, welding, grinding & erection equipments etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
541.47
-
72773.57
... More
Labour charges for Erection, Electrification and commissioning works of Pump sets including aligning and balancing with all necessary erection of materials and labour including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges, tools and equipments etc., involved in the job. as per specifications, with testing of as per instructions etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
11865
... More
-do- 80mm dia
2
-
5558.7
... More
Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1.68
-
181.69
... More
Providing and fixing 60x60cms M.S inspection door with necessary M.Sframe made out ofM.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.) etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
3817.8
... More
Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
210.6
-
22776.39
... More
RISING MAIN:- Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and boning rods at every 100 mtrs. Wherever necessary as directed in the following strata. (Manual Means) In Ordinary Soil etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
210.6
-
57936.06
... More
Providing and laying in position plain cement concrete of grade M15 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @ 0.53cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
25.42
-
149061.61
... More
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x10 Sqm etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
100
-
22000
... More
-do- 90 mm dia PVC service saddles
49
-
7840
... More
-do- 110mm dia PE100 PN 6.0 / 6 Kg/cm2
308
-
93139.2
... More
Providing 2 coats of Snowcem/Water-proof cement paint of approved colour and shade over one coat of primer including curing etc., complete for RCC over head tank. etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
270.55
-
60508.51
... More
Supplying and fixing of HDPE Water meter box to protect the water meter of class "B" Multijet type of size 15 to 32 mm including HDPE box with base dia.300 mm x lid dia 200 mm x height 250 mm with openable lid and the cover is buried below GL with GI including earth work excavation for 600 mm x 600 mm and base sand filling for 100 mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12-20mm BG jelly for an height of 150 mm thick and refilling with excavated earth for balance 100 mm height, disposal of excess earth with all lead and lifts etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
555
-
291375
... More
Providing 2 coats of Snowcem/Water-proof cement paint of approved colour and shade over one coat of primer including curing etc., complete for RCC over head tank. etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
165.31
-
36971.58
... More
Supply and delivery of Resilient seated soft sealing 80mm dia Sluice Valves with body, bonnet of Ductile Iron of grade GGG50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face dimensions as per BS 5163-89/IS 14846-2000/ DIN 3202 F4/F5. The stem sealing should be with Toroidal sealing rings (minimum 2 'O' rings). All the valves should be with electrostatic powder coating both inside and outside with pocket less body passage. The valves shall be supplied with suitable size galvanized bolts and nuts of required numbers as per relevant IS.
16
-
143673.6
... More
Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications.(“ii) English and Roman - Hyphen and the like not to be measured and paid etc., complete. 65x65x8mm angle iron frame etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
3000
-
2220
... More
Providing and constructing granite / trap / basalt size stone masonry in foundation cement mortar 1:6, stone hammerd dressed in courses not less than 20 cms high, bond stones at 2 m. apart in each course including cost of materials, labour, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
4.65
-
23631.3
... More
Providing and constructing RCC hexagonal ventilator finial for RCC over head tank the finial to be constructed with CC (M-20) proportion using 20mm and down size jelly with reinforcement using 6mm dia., M.S. rods 4 nos., for each of the pillars both ways for full width of doom at 12cm c/c, the ventilator to be of 0.45 M x 0.5 M size provided with 25mm x 25mm x 5mm M.S. frame welded with diamond mesh to its full width and depth fully covered with aluminium mosquito mesh finished smooth with CM 1:3 proportion to required shape and size and ornamental finish including two coats of anti-corrosive paint for frame and mesh and two coats of cement paint matching to over head tank etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1
-
5989.2
... More
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
4
-
13015.8
... More
Providing and fixing 60x60cms M.S inspection door with necessary M.Sframe made out ofM.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.) etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1
-
1908.9
... More
-do- Cutting in Aspalt road surface
20.66
-
11757.61
... More
-do- Cutting in Aspalt road surface
15.12
-
8604.79
... More
Providing and fixing 60x60cms M.S inspection door with necessary M.Sframe made out ofM.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.) etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1
-
1908.9
... More
Supply installing, testing and commissioning COMMON control panel consisting of the following INCOMING: 1 No. Set of phase indicating lamps with SFU of suitable rating 1No , Analog Ammeter, 1 No. Analog Voltmeter 1 no with phase selector switch, Isolating Switch OUTGOING for Main Electrical Pump: 1 No. MCB 1No. DOL or S/D starter suitable for respective HP 1 No. Electrical Protection like single phase preventor, Under voltage over volatge , under current over current protection suitable for the pump described above 1 No. Outdoor type
1
-
14500
... More
Labour charges for Erection of outdoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc., complete. as per specifications, with testing of as per instructions etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1
-
1198
... More
-do- 140mm dia PE 80 PN 6.0 / 6 Kg/cm2 HDPE Pipes
1200
-
568260
... More
-do- 50mm dia
2
-
700
... More
Supply and delivery of 100mm dia Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABL accredited lab. The water meters shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointer of the meter shall be as per ISO 4064 class B specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates. Note: the above rates are basic rates inclusive of transportation charges, earth work excavation, labour charges, cutting and threading, conveyance, welding and hire charges for tools and plants ets., complete.
2
-
51062
... More
-do- 125mm dia PE100 PN 6.0 / 6 Kg/cm2
306
-
115025.4
... More
-do- 80mm dia
2
-
5558.7
... More
-do- 80mm dia
1
-
2900
... More
Providing and applying two coats with oil bound washable distemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and paper smooth, cost of materials, labour etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
83.56
-
9651.18
... More
Providing 18mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
69.42
-
19680.57
... More
Provding and fixing water meter with Stop cock, jam nut socket in GI pipe line including cutting and threading the pipe and making long screws inluding cost of all materials labour,HOM of equipments and testing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
555
-
769230
... More
-do- 75mm dia PE100 PN 6.0 / 6 Kg/cm2
780
-
132678
... More
Providing T.M.T steel reinforcement for R.C.C Work including straightening ,cutting bending, hooking, placing in position, lapping, and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (lap,hooks, and wastage shall not be measured and paid) including for OHT &reservoier, cost of materials, lobour, HOM of machinery etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
818.1
-
61349.32
... More
-do- Cutting in Macadam road surface
32.4
-
11770.92
... More
Supplying, and Fixing 150mm dia CI puddle flanges confirming to IS 7181-1986 with latest amendments in position for RCC walls including hoisting and conveying them to work spot etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
10277.4
... More
-do- 80mm dia
9
-
18597.6
... More
Supply and delivery at site of brand new 80mm dia best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
3150
... More
CONSTRUCTION OF ELSR OF 50 KL CAPACITY AT 9.00 M STAGING :Earth work in excavation of foundation of structures upto 3 m depth as per drawing and technical specification, including setting out, providing shoring,strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising /transporting the remaining earth upto 1.00km lead etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
51.28
-
2799.89
... More
Supply and delivery at site of brand new 150mm dia best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1
-
490
... More
-do- Cutting in Asphalt road surface
5.27
-
2999.16
... More
20mm Steel wire rope etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
247
-
8793.2
... More
Providing, Supplying & Installation of Three Phase openwell submersible pump set (1+1 ) Set of Two Unit of approved make as filter feed pump with required accessories etc. complete: fuses and fuse box, starter and panel board, ELCB, MCB, electrical cables from board to motor, piping for suction and delivery and for connection to the filter unit and rubber sheet support for pump and confirming to the following specifications: Head : 20 m, Flow rate : 30,000 lph, Stater and Panel Board : 1 Set, ELCB, MCB : 1 set, Pipesize for inlet and outlet : 50 mm, MOC of Impeller : Cast Iron, MOC of Impeller : Cast Iron, MOC of Delivery Casing : Cast Iron, MOC of Motor body : Cast Iron, MOC of Motor shaft : Stainless Steel,
1
-
124950
... More
Providing 150 mm dia Air valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
8221.5
... More
Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of following size and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as directed including hand railing on both sides with 25mm dia G.I. pipes with angle iron props at 2 mtrs, interval and 0.5 mtr, height including fixing in ground with C.C. 1:2:4 and two coats of nonpoisonous anticorrosive bituminous paint with all lead and lift etc., complete. 65x65x8mm angle iron frame etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
18.23
-
34856.67
... More
Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
109.62
-
11855.4
... More
Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 27.20kgs, with 12mm and down size graded granite metal coarse aggregates well compacted for plain chajja of 8.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, finishing, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1.35
-
708.75
... More
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1
-
1025
... More
LAMELLA CLARIFIER:- Design, fabrication, supply, erection, testing and commissioning of Lamella Clarifier made of MOC -M.S as per IS-2062 and grade BR with all accessories cost of all materials, machinery, labour, cutting, aligning,anchoring, welding, finishing, cleaning required accessories and installation of Lamella using the crain on the pre constructed platform Etc., Complete with connecting the MS platform between SMFT tank and Lamella Clarifier and confirming to the following specifications. Angle of inclination ( Cos θ)= 55degree, with a Rise rate of 1.80 m / Hr/ Sqm. Painting Work: Surface preparation with grit blasting with 50 micron profile; For inside Two coats of epoxy primer and two coats of non reactive epoxy coat , for Out side one coat of red oxide primer and two coat of Enamel paint. Etc., Complete as directed by the Engineer in-Charge of work. MOC of Lamella Clarifier : Mild Steel (IS 2062) with food grade epoxy paint confirming IS 12643/1989., Type of settling : Inclined Plate type, MOC of inclined plates : FRP, Lengeth of lamellaplates : 2400 mm, Total no of lamellaplates : 23 No, Sludge storage : Hopper type with sludge drain and necessary valves, walkway for Operation and meintenance : 4" C section with chequgard plate of 4 mm thick Around the lamella, Ladder with raling to reach walkway on top of lamella : 3" L section with Round tube for raling,
1
-
854070
... More
Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 24kgs, with 12mm and down size graded granite metal coarse aggregates @0.05175cum and fine aggregtes @ 0.0345cum, with superplastisiser @0.225lts, machine mixed, well compacted for plain chajja of 7.5 cms. average thickness, upto ground floor level, including cost of all materials,labour, HOM of machinery, finishing, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2.16
-
1009.35
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification for staging, columns and braces above ground level etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
8
-
109990.96
... More
Earth work excavatoin for water Supply & Sanitary lines, Electrical conduits either in pits or pipe line trenches (upto 600mm Trench width) as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing, using sight rails & boning rods at every 100 mm whevere necessary removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench, including backfilling the excavated earth to the extent required and utilising the remaining available excavated earth locally for the work. in the following strata classifications by Mechanical Means In Ordinary soil etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
487.85
-
66591.53
... More
-do- 80mm dia
1
-
3045
... More
Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at 2 m. apart in each course including cost of materials, labour, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2.62
-
16118.11
... More
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
900
... More
CLARIFIED WATER STORAGE TANK:- Providing, Supplying & Installation of Storage System (Ground Level Storage Reservoir) using Prefabricated Corrosion resistant Zincalume steel structures made of as per IS- 15961 for intermediate balancing tank (filter feed tank) and confirming to the following specifications: Diameter of wall – 2770 mm and Height of wall (Excluding Doom roof) to be 2080 mm. The Material of construction of walls, liner and Doom roof to be Zincalume steel, Heavy Duty PVC Food grade and Zincalume sheets in knockdown form respectively to be assembled at site as per the drawings. Heavy duty hot dipped galvanized external ladder (1 no) to be provided along with heavy duty hot dipped galvanized access hatch. The rate is inclusive of the cost of installation of tank on sand bed with bold down clamps & 4 nos of Nozzles made of Galvanized steel to be provided for Inlet, Outlet, Drain and overflow. MOC of Storage System : Zincalume steel (IS 15961), Diameter of tank : 5530 mm, Height of tank (Excluding doom roof) : 2080 mm, MOC of wall panels : Zincalume alloy coated steel, MOC of Liner : Heavy Duty PVC Food grade, MOC of Doom roof : Zincalume alloy coated High tensile steel, External ladder : Heavy duty hot dipped galvanized (1 no), Access hatch : Heavy duty hot dipped galvanized (1 no), Bolts : Galvanized flanged head High tensile steel bolts, Nozzles : Galvanized steel ( 4 nos), Butterfly valves : 2 nos,
1
-
352800
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs,with 20mm and down size graded granite metal coarse aggregates @0.84cum and fine aggregtes@ 0.56cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick,well compacted,in foundation,plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1.32
-
7552.41
... More
Providing and laying Reinforced cement concrete of mix design of M-25 Grade with cement @ 340 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.7 cum and fine aggregates @ 0.47 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating,curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
7.95
-
61397.21
... More
Providing and fixing 60x60cms M.S inspection door with necessary M.Sframe made out ofM.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.) etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2
-
3817.8
... More
Providing & fixing G.I.pipe railing of 32mm dia.G.I. pipe B-class in two rows of roof dome flat slab of landing of elevated storage reservoir including cutting, welding, threading, painting, embedding in C.M. pillars etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
39.28
-
28293.38
... More
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1
-
3815
... More
FOUNDATION FOR WTP: Earthwork excavation by manual means for foundation of buildings, culverts, Water supply and sanitary lines and elactrical conduits etc,either in pits or in trenches 1.5m and above in width,in ordinary soil not exceeding 1.5m in depth including dressing the bottom and sides of pits and trenches,stacking the excavated soil clear from edges of excavation with lead upto 50 m.including breaking of clods etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
24.06
-
7553.64
... More
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
4.5
-
14642.78
... More
Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
8
-
1747.2
... More
Providing and fixing in position in cement concrete 1:3:6 steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings using Z angles of 25x33x3mm, weighing 1.419 Kg/m both for outer and inner frames and central mullion section of size 5x46x3mm.weighing 2.28Kg/m duly providing T section 19x19x3mm weighing 0.839 kg/m for glazing of windows not more than 34 cms. c to c including providing and fixing 4mm. thick reeded glass with teakwood beading of required size, all steel sections should confirm to I.S 7452:1990, 4nos. of holdfasts of approved size, section should be cut to length welded and electrically grinded subdividing frames of unit shall be tenonned and revetted into the frames electrically. All the steel surface shall be throughly cleaned free of rust and painted with one coat of anti-corosive paint and finishing with two coats of ready mix paint of approved colour and make including cost of materials, fixtures, labour and HOM of machinery etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1.08
-
4438.48
... More
Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
59.38
-
340248.59
... More
Providing & fixing G.I.pipe railing of 32mm dia.G.I. pipe B-class in two rows of roof dome flat slab of landing of elevated storage reservoir including cutting, welding, threading, painting, embedding in C.M. pillars etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
18.85
-
13439.11
... More
Supplying and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, design derived from DIN 4057, Should be supplied with support tile I (FSL, FSS, SI) should be able to recieve class AA traffic loads.r etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
24
-
65640
... More
Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and boning rods at every 100 mtrs. Wherever necessary as directed in the following strata. (Manual Means) In Ordinary Soil etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
149.85
-
41223.74
... More
Providing and laying in position plain cement concrete of grade M 15 with OPC cement @ 240kgs, with 40mm and down size graded granite metal coarse aggregates@0.878cum and fine aggregates @ 0.459cum machine mixed, concrete laid in layers not exceeding 15 cms. thick,well compacted,in foundation, including cost of all materials,labour, HOM of machinery,curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
27.27
-
154545.09
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Kolar, Karnataka