Directorate Of Municipal Administration Tender

code06 - Providing and constructing of Machinehole chambers conical in shape at top with CC 136 foundation using 40mm and down size graded metal of approved quality and with an offset of 015m alround the chamber and brick masonry in CM 14 plaster with bricks of approved quality and CM plaster 13 proportion 12mm thick inside and outside except for the conical surface outside where the thickness of plaster shall be 20 mm thick with 1 to 6 slope in the concrete towards the central drain finished smooth and fixing of pipes in CC 124 with graded metal of 20 mm and down size including Providing and fixing SFRC Machinehole frame and cover confoming to IS 12592 Part I 1988 IS 12592 Part II 1991 with latest amendments in CC 1:2:4, Providing and fixing of plastic foot steps staggered at 30cms apart as directed, watering, curing,barricading, danger lighting, pouring tar over M H frame and cover cost of tar shoring strutting dewatering engraving Machinehole No on the inner and outer conical surface etc as per the drawing with all lead and lift for various diameters and depths noted below With Table Moulded Bricks Medium Duty cover and frame For 12m dia Constructing Table Moulded Bricks Machinehole 12 m internal dia 20 m depth Medium duty SFRC cover

code09 - Earth work in surface excavation by manual means for lowering levelling the ground by chiselling and wedging in Hard rock for all works other than foundation depth not exceeding 100 mm as per drawing and technical specifications including setting out barricading caution lights dressing of excavated surfaces disposing off the excavated spalls stuff stacking the selected spall stuff for reuse in a radius of 50 m and lift upto 15 m including cost of labour tools usage other appurtenances required to complete the work

code03 - Loading and Unloading of Stone Boulder Stone aggregates Sand Kankar Moorum Tipper 55 m3