Directorate Of Municipal Administration Tender

cmccmy08 - Supply and Fixing of PARALLEL BARS :" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. Upright structural posts of height 2.16 m, 1.56 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing.Handrail AT height 2.0 m, 1.7 m, 1.4 m and Dia 32 mm shall be an all-robotic welded unit, fabricated from 32 O.D. galvanized steel pipes.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with All Joints are robotic welded. All components designed and manufactured to meet with EN 1176 safety standards. PLAY EQUIPMENT DIMENSIONS: 3.60 x 0.20 x 2.15 m

cmccmy05 - Supply and Fixing of MOONWALKER : " The product to match the colours, design, size, contours andaesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. Moonwalker is designed to be used seated, standing, or lying down. At wheelchair transfer height, the Moonwalker provides a supportive, dynamic experience. This is beneficial for those who may feel less confident or have less physical mobility. The textured Wetpour safety surfacing is impact absorbing for safer, more comfortable play. Each position challenges balance and coordination for all children, while encouraging social play.Galvanised powdercoated steel, Wetpour textured surface.Rotating, social, supportive movement.1300mm diameter disc, Wheelchair transfer height.All Joints are Robotic Welded. Dimensions Dia 1.25 x 1.20 M

cmcmcy23 - Supply and Fixing of SEATED PEDAL TRAINER MACHINE : " The product to match the colours, design, size, contours andaesthetics exactly as per the image attached. " Ideal for outdoor gyms, the seated pedal trainer is an excellent option for enhancing lower body strength. Specifically crafted to target the muscles in the gluteus maximus and the hamstrings, it aids in: * Strengthening the lower limbs. * Enhancing stability and agility in the three main joints. * Providing relief from aches, discomfort, and muscular atrophy associated with bending, stretching, and conditions like rheumatoid arthritis. Dimension:- 1.88 m x 1.16 m x 1.66 m Max User Weight:- 130 kgs

cmcmcy38 - Providing and fixing the tensile membrane made from Germany make, make Mahler, valmex FR 900 TYPE with 100% white color, PVDF- lacquer on both side, protected against microbial and fungal attack, UV-Protected with weight of 900GSM with 02 years warranty

cmcmcy20 - Supply and Fixng of Rider: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 0.5 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. A single seat of size 330 mm x 250 mm fixed to the top of the vertical post and two Pedals & Bars of size 145 mm x 50 mm and Dia 38 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 0.91 m x 0.65 m x 1.27 m

cmccmy13 - Supply and Fixng of Health Walker: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Foot Rest of size 361 mm x 161 mm are attached to the Standing Bars 957mm x 60 mm fabricated from 60 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.18 m x 0.553 m x 1.25 m

cmcmcy18 - Supply and Fixng of Squat Pushing: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Vertical bars height of 1.70 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm wall thickness of the tubing. L shaped bars of 960 mm x 600 mm carrying two seats of 0.34 m x 0.34 m fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.93 m x 0.56 m x 1.70 m

cmcmcy22 - Supply and Fixing of BENCH PRESS MACHINE : " The product to match the colours, design, size, contours andaesthetics exactly as per the image attached. " It is designed exclusively for outdoor gyms. The Bench Press offers the indoor gym experience in an outdoor setting. It's a key component of the distinctive 'plate-loaded' weight system, allowing users to adjust weights safely and securely. * Accessible to individuals at various fitness levels. * Facilitates safe and secure weight adjustment. * Boasts high-quality construction and finish. * Simple setup and safe usage. * Affordably priced. * Requires minimal maintenance. * Inspires users and fosters evolutionary progress in gym designs. Dimension:- 1.61 m x 1.89 m x 1.68 m Max User Weight:- 130 kgs

cmcmy28 - Supply & Installation of IP based H.264 Fixed colour C/Mount 2.0 mega pixels Day / Night camera, with high quality VGA CMOS sensor. with inbuilt IR filters and powered through POE (Power over Ethernet enabled). or 12V DC power supply unit with all fixing accessories.

cmccmy01 - Supply and Fixing of BIKE RIDER: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. All Joints are Robotic Welded. HDPE of size 0.83 x 0.35 x 0.87 m

cmccmy03 - Supply and Fixing of FIERO A SWING: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. Shaped structural posts of height 2.31 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing. Plastic Components such as swing seats [super thick plastic] shall be animated and shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6 - 8mm. All components designed and manufactured to meet with EN 1176 safety standards. PLAY EQUIPMENT DIMENSIONS: 3.21 x 1.54 x 2.50 m

cmccmy16 - Supply and Fixng of Tai Chi Spinners:" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.15 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail of Dia 477 mm made with the pipe Dia of 32 mm fabricated from 32 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.25 m x 1.09 m x 1.49 m

cmcmy07 - Supply and Fixing of Monkey BarVFM The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. Support posts of height 1.82 m are to be schedule Galvanized steel with a 60 mm OD Outer DiameterAll the posts are to be finished with a baked on powder coat finish. Handrail of size 1.3 m and Dia 48 mm shall be an welded unit, fabricated from 48 O.D. galvanized steel pipes with a baked on powder coating finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Electro - statically applied polyester powder must have a tough finish with maximum durability. The rates are inclusive of all taxes, transportation charges and installation. PLAY EQUIPMENT DIMENSIONS: 3.29 m x 1.48 m x 1.80 m

cmcmy19 - Supply and Fixng of Mini Ski: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.40 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. The Standing Bars 991 mm and Dia 60 mm fabricated from 40 O.D. galvanized steel pipes Upper part of Support Handrails of size 1.04 m high and Dia 38 mm fabricated from 40mm O.D. and 32 mm O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably.Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.07 m x 0.78 m x 1.40 m

cmcmcy29 - 32 channel NVR Make : HIKVISION/ CP Plus

cmcmy26 - CALESTHENICS Upright structural posts of height 3.25m is to be schedule HOTDIPPEDGalvanized steel with a114mm O.D. and 2.2mm(wall)thickness of the tubing.The Steel quality is BS1387-1985 technical standard BS1387-1985.All metal components are to be finished with a baked on powder coat finish. Powder coatings used is Akzo Nobel’s INTERPON POWDER COATING TECHNOLOGY PAINTS.Specializedconnectorssuchasclampsandcouplingscastedfromaluminumalloywhichispretreated,cured andsandblastedandfinishedwithabakedonpowdercoatfinishusingAkzoNobelINTERPONcoatingsareused to connect the various components of the playground The push up and dip station is made of galvanized steel consists of 7 shaped hand rails support of size 1060 mmX942mmX38mm.Theyareconnectedtothepoleswithaanall-roboticweldedunit,fabricatedfrom32 O.D. galvanized steel pipes with a baked on powder coating [using AkzoNobel INTERPON paints] finish. The Electro- statically applied polyester powder has a tough finish with maximum durability using AkzoNobel INTERPON paints application, and dual zone cure oven to a thickness of 0.5mm thickness, oven cured between 191oC and 220oC The Jumping Stair is a plyometric exercise that can enhance vertical jump, speed, and agility is made of rectangular platform of size 482 mm x 430 mmThe Chin-Up bar used for increasing grip strength, improve posture, and enhanced functional strength development. They are effective for building upper body strength, specifically in the back, shoulders, arms, and core. The Chin Up bars are made up of galvanized steel of dia 32mm Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with ultra violet stabilized plastic safety caps as per EN1176 standardsasasafetyfeatureagainstprotrudinghardware,aestheticpleasingagainstuglyexposedhardwareand prevention against vandalism as well ALL WELDING IS CARRIED OUTBYROBOTS [SIMMILIAR TO THE ONES USED IN THE AUTOMOBILE INDUSTRY], WHICH GUARANTEES STRONG AND SMOOTH WELDS ELIMINATING ANY RAG, WELD SCARS AND ENSURES THE INTEGRITY AND STRENGTH OF THE WELDED AREAS.

cmcmy30 - 4TB hard disc

cmccmy12 - Supply and Fixng of Waist Twsiter:" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.35 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail Dia 42 mm fabricated from 42 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably.Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Equipment Dimensions: 1.44 m x 1.29 m x 1.35 m

cmccmy14 - Supply and Fixng of Arm and Pedal Bike: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Horizontal Structural post of length 1.10 m supporting Upright structural posts of height 1.23 m and Dia 60mm is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Pedals of size 108 mm & Bars of size 197 mm. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.43 m x 0.65 m x 1.23 m

cmccmy10 - Supply and Fixing of KPSCP - 022 :"The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The large polygonal climbing unit consisting of two polyethylene body components and a metal fitting and can be differentiated by positioning multiple blocks on top of each other or side by side. It helps children socialize while having fun and play together. While the climbing experience, which gradually becomes difficult thanks to the different elevations created by the units, contributes to the development of their physical skills, it is aimed that children create and play their own games in the areas formed within the modules. Metal parts are comprised of ST 37 Steel with a 3- step metal finish.Sandblasting and solvent-free zinc primer coating and electrostatic powder paint application.UV resistant with high value of light fastness rotomolded polyethylene parts are used to form the structure.Make of ultra-durable epoxy technology and textured surface easy to grasp firmly. All joints are Robotic welded. A Dimensions LxWxH : 1.75 x 1.60 x 2.40 m

cmcmcy04 - Supply and Fixing of INFINITY BOWL : " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.The infinity bowl was designed to sit at an angle. This, paired with the dipped edge feature, allows ease of transfer. The deep bowl area provides supportive and comfortable seating for all users. The angle enables the bowl to self-propel. A child need only shift their weight slightly to get the bowl moving. The Infinity Bowl encourages both independence and cooperation when playing.Dipped access point, silver sparkle finish.Galvanised and Powder Coated steel bowl.Spinning, supportive movement, self propelled movement.All Joints are Robotic Welded. Dimensions Dia 0.72 M

cmccmy17 - Supply and Fixng of Pull Down Challenger: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.88 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two pair of U-Shaped Pull down Bars 806 mm x 700 mm and Dia 40 mm are spaced at 630 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 2.30 m x 0.70 m x 1.88 m

cmccmy02 - Supply and Fixing of SEE SAW FOUR SEATER-E: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 3110 mm length and Dia 114 mm. It consists of 4 seats which is made of LLDPE virgin plastic of size 305mm X 213 mm X 125 mm. All Joints are Robotic Welded. PLAY EQUIPMENT DIMENSIONS: 3.10 x 0.44 x 0.80 m

cmcmy31 - 21inch Colour SVGA TFT Monitor Make: Samsung/Equ

cmcmcy27 - Supply & Installation of IP based H.264 Fixed colour Indoor dome type 2.0 mega pixels Day / Night camera, with high quality VGA CMOS sensor. with inbuilt IR filters and powered through POE (Power over Ethernet enabled). or 12V DC power supply unit with all fixing accessories.

cmcmcy11 - Supply and Fixng of Self Weighted Rower: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Horizontal bars of length 1.26 m is to be schedule HOT DIP Galvanized steel with a 60mm O.D. and 2.2mm (wall) thickness of the tubing. Handle Bars of 0.74 m and Dia 38 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.26 m x 0.80 m x 1.59 m

cmcmcy15 - Supply and Fixng of Double Air Skier: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Foot rest of size 365 mm x 164 mm and Standing Bars of length 1640 mm x 40 mm fabricated from 40 O.D. galvanized steel pipes. Lower part of Support Handrails of size 0.8 m high and Dia 47 mm and Upper part of Support Handrails of size 0.51 m high and Dia 32 mm fabricated from 47 mm O.D. and 32 mm O.D. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably. Bearings : Maintenance-free sealed ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.61 m x 0.50 m x 1.50 m

cmcmcy25 - Supply and Fixing of LEG SQUAT MACHINE : Supply and Fixing of CHEST EXPANDER MACHINE : " The product to match the colours, design, size, contours andaesthetics exactly as per the image attached. " The leg squat machine is an excellent option for enhancing lower body strength in outdoor gyms. Specifically crafted to target the muscles in the gluteus maximus and the hamstrings, it aids in: * Strengthening the lower limbs. * Improving the stability and agility of the three main joints. * Providing relief from aches and discomfort associated with bending, stretching, muscular atrophy of the lower limbs, and conditions like rheumatoid arthritis. Dimension:- 1.89 m x 1.54 m x 1.77 m Max User Weight:- 130 kgs

cmcvcmy09 - Supply & fixing of children multi play equipment KAYA-E : " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. This equipment comprises of 8 curved poles of size Dia 114 mm and thickness of 2.5 mm which is made of galvanized steel. The poles are welded on to a base plate made from steel with 114mm inner diameter. It consists of a central circular money loop rings which are made of galvanized steel and of size Dia 1600 mm. The Top rail itself is of Dia 48mm. It has another inner circular ring which is also made of Galvanized steel and of Dia 510 mm.The Yellow plastic climber is made of Virgin LLDPE and of dimensions as 1015 mm x 181 mm x 2180 mm.The patterned cross bar climber is made of galvanized steel and of size 1023 mm x 266 mm x 2180 mm. The Balancing Rotator is made of galvanized steel and of size 716 mm x 500 mm x 2180 mm which in turn connected to the 2 poles through a connector of size 1290 mm and Dia 60 mm. The Steering wheel hanging climber is made of galvanized steel and has Dia 38 mm and of size 716 mm x 500mm Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as per EN1176 standards. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 4.05 m x 3.96 m x 2.58 m