Directorate Of Municipal Administration Tender

code05 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. Extra for excavating trenches for pipes, cables and similar works in all kinds of soil where excavation width is upto 600 mm for depth exceeding 1.5 m, but not exceeding 3 m. add 20 % extra (Rate is over corresponding basic item for depth upto 1.5 m)

code18 - Labourcharges forremoving the gear box from the body, damage parts & re-fixing the new parts to the gear box, re-fixing the gear box in the body in the spot & trial run.

code16 - Providing and Fixing of Spares to 500mm to 600 mm dia Valve Gear Box: Supply and Fixing of Thrust Bearing No. 511107

code10 - Providing, fabricaing and fixing at site various diameters of MS Flanges as per IS standards to fix sluice valves as per sketch. The rate to include cost of all materials, labour, consumables, hire charges for tools and tackles, weldiing equipments etc. complete as per instructions of the Engineer in charge for: Flanges of 700mm dia and 30mm thick.

code02 - Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately. By Manual Means. Granular course.

code08 - Providing, fabricaing and fixing at site various diameters of MS Flanges as per IS standards to fix sluice valves as per sketch. The rate to include cost of all materials, labour, consumables, hire charges for tools and tackles, weldiing equipments etc. complete as per instructions of the Engineer in charge for: Flanges of 600mm dia and 25mm thick.

code11 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications.

code01 - Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately. By Manual Means. Bituminous course.

code06 - Dewatering the sewage / storm water by using reqired HP submersible pump for the diversion of storm / sewage during the execution of work. Considering for one Pump. 10 hp pump

code14 - Reconditioning of existing shutter/ wedge and body of different valve in use by required tools and equipment including metalling and inner threading with suitable pitch and thickness, grinding and smoothening of the surface etc.. replacing the rubber covering with EPDM gasket, reconditioning of wedge lining and reflexing in place to the existing valves and ensure smooth operation. The charges include loading, unloading, lead, lift, transportation, HOM, labour, material etc complete. -Do- Spindle suitable for 500mm dia Sluice valves of PN 1.00/PN1.60

code15 - Providing and Fixing of Spares to 500mm to 600 mm dia Valve Gear Box: Supply and Fixing of Needle Bearing No. DL 2505.

code07 - Manufacturing, providing, transporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-7322:1985 with latest amendments and including perfect linking and welding of joints to correct position includng cost and conveyance of materials with all lead and lifts, cost all labour and giving satisfactory hydraulic test as per IS:3589:2001 with latest amendments for test pressure and working pressure both at factory and site etc. complete as per detailed specifications with inside lining two coat of food grade epoxy painting of pproved make with each coat of 250 micron thick (after dry) over one coat of food grade epoxy primer of approved make with minium of 50 micron thick (after dry) and outside 25mm thick coating in CM 1:3 by providing 50x50mm weld mesh including loading and unloading of the pipes for the following category to suit PSC / MS / CI / AC / DI / PVC pipes. The weight of MS shell only by considered before lining and coating for arriving at the rate. The thickness of plate will be specified by the engineer. (Contractor will make his own arrangements for procuring water for testing) for: Pipe bends,branches, tail pieces, reducers etc. for pto 500mm dia pipes

code09 - Providing, fabricaing and fixing at site various diameters of MS Flanges as per IS standards to fix sluice valves as per sketch. The rate to include cost of all materials, labour, consumables, hire charges for tools and tackles, weldiing equipments etc. complete as per instructions of the Engineer in charge for: Flanges of 250mm dia and 20mm thick.

code03 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. In all kinds of soils. Depth upto 1.50m

code13 - Manufacturing and supply of Gunmetal spindle and checknut for following dia sluice valves including cost of materials labour, transportation, Taxes and duties. The spindle and checknut to be supplied shall be suitable for existing sluice valves fixed in the pipeline. The pitch and thickness of the screw of spindle shall be suitable for the existing gate and body of the valve. The materials supplied shall be guaranteed for one year from the date of supply. Also removal of worn out valve spindle at spot from the valves using crane/Tripod and fixing of prepared new spindle checknut with new bolts and nuts, packing with transportation from work spot to site and back etc; complete. -Do- Spindle and checknut suitable for 500mm dia Sluice valve of PN 1.00/PN1.60