Directorate Of Municipal Administration Tender

2.11 PWD SR Civil Volume_I - 2.11 h. All other type of structures for TMT Steel Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification TMT Bar Dimensions 1) 12mm Bars.8Nos i.e =8NosX0.7MeterX0.89Kg=4.98Kg 2) 8mm Bars.8Nos i.e =6NosX1.6MeterX0.395Kg=3.79Kg

2.2.1 PWD SR Civil Volume_I - Concerete 2.2.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. RCC Dimension=0.35mX0.35mX0.7m=0.112Cum

2 PWD SR Civil_I - Centering Work 2. Foundation, Sub structure ( 5 Percentage on finished rate of concrete per m3 )

2.5.1 BESCOM Volume_VI - 2.5.1) 2C x 1.5 mm2 SupplyinganddrawingFlexibleMulticoreCablemanufacturedwithelectrolyticgradeflexiblecopperwithlowconductorconfirmingtoIS81301984and(Virgin)PVCinsulationsheathedsuitableforworking voltage upto 1100 Volts as per IS-694:1990

11.8.2 BESCOM Volume_VI - 118.2 LED Street Light 40W Supply & Fixing of LED Street Lightwith pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output. Rated life Burning Hrs 50000hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole muting with outer diameter of 40mm to 50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Lumina ire manufacturer should have in house facility credited by NABL CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source.

13.4.1 BESCOM Volume_VI - 13.4.1 Single bracket 1.5 m. Length Supplying and fixing telescopic M.S. bracket fabricated byusing 0.5m length 4" dia telescopic M. S. pipe, with 2" dia1.5mlong M.S.Bracket and are welded with suitable angle, using6mm thick M. S. sheet, grip bolts & nuts, as required, suitablefor 9 to 12 ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories.

5.18.1 BESCOM Volume_VI - 5.18.1) 6-32 A SP MCB Switch Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.

1.6.1 BESCOM Volume_VI - 1.6.1) Ordinary Soil Digging of Pit for providing GI Pipe type Earthing

5.41.1 BESCOM Volume_VI - Angle Iron Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5.41.1) 40x40x6mm

21.05 BESCOM Volume_VI - 21.05 Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 31.05 ) 2.5 to 25 Sq mm

1.17.1 PWD SR Civil Volume_I - 1.17.1 All kinds of soils. Depth upto 1.50 m Earth work excavation for Cables Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata.

32.03 BESCOM Volume_VI - 32.03) 10 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) UG Cable Basic Rate:141842 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975

32.04 BESCOM Volume_I - 32.04) 16 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm) UG Cable Basic Rate:88418 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975

66.05 BESCOM Volume_VI - 66.05) HDPE/PLB Pipe 40/33 mm

32.14 BESCOM Volume_VI - 32.14) 95 Sqmm, 3.5 Core, (21 GI Strips - 4 x 0.8 mm) UG Cable Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975

51.01 BESCOM Volume_VI - Pipe type earthing for each street light box 51.01) GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg

51.02 BESCOM Volume_VI - 51.02) Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

51.03 BESCOM Volume_VI - 51.03) Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

21.07 BESCOM Volume_VI - 21.07) 120 to 240 Sqmm Labour Charges Basic Rate:32278 Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 31.05 ) 2.5 to 25 Sqmm. .

9.04 BESCOM Volume_VI - 9.04) above 8 Ways Erection of LT Feeder piller box including necessary civil works like soil excavation & concreting etc. complete

11.8.2 BESCOM Volume_VI - 27.02 Fixing of Route Joint Indicating Slab

BESCOM Volume_VI - Releasing & Refixing of Over Head Service Mains (Single Phase/Three Phase) for consumer installation and street lighting and similar work

23.07 BESCOM Volume_VI - 23.07 Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc.,

BESCOM Volume_VI - Releasing of RCC/PSCC Poles 9 Mtr of 90% of the Pole erection charges.

7.04 BESCOM Volume_VI - Releasing of Conductor 7.04) Rabbit ACSR

5.02 BESCOM Volume_VI - 5.02 Releasing of 4 Pin cross arm with Insulator and Braces fixing

BESCOM Volume_VI - 6.04)Releasing of 1.1 kV GI Pin for 1.1 kV Ceramic Shell Insulator

30.01BESCOM Volume_VI - 30.01) 8 Way LT Feeder Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2(Refer Dwg No. BESCOM/GM/QS&S/41 Dtd 24.11.2018)

32.18 BESCOM Volume_VI - 32.18) 240 Sqmm, 3.5 Core, (30 GI Strips - 4 x 0.8 mm) UG Cable Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975

34.12 BESCOM Volume_VI - 34.12 240 Sqmm, 3.5/4 Core Straight Through Jointing Kit Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573

35.03 BESCOM Volume_VI - 35.02 3.5 x 70/95/120 Sqmm Epoxy Terminating Kit Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable

60.12 BESCOM Volume_VI - 60.12) 240 Sqmm Lug Aluminium End Terminal (Lug)

64.02 BESCOM Volume_VI - 64.02) 16 Sqmm Lug Aluminium End Terminal (Lug)

68.08 BESCOM Volume_VI - 68.08) Route & Joint indicating slab with MS Anchor rod

63.01 BESCOM Volume_VI - 63.01) 25 mm Brass Cable Gland

30.02 BESCOM Volume_VI - 30.02 )12 Way LT Feeder 12 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2 (Dwg No. BESCOM/GM/QS&S/41 Dtd 24.11.2018)

60.08 BESCOM Volume_VI - 60.08) 120 Sqmm Aluminium End Terminal (Lug)

60.07 BESCOM Volume_VI - 60.07) 95 Sqmm Aluminium End Terminal (Lug)

5.7.2 BESCOM Volume_VI - 5.7.2) 32Amps Fuses Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.

5.13.1 BESCOM Volume_VI - 5.13.1 ) 25 Amps Contactor Switch Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.

5.18.7 BESCOM_VI - 5.18.7) 6-32 A TPN MCB Switch Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.

5.47 BESCOM Volume_VI - 5.47) 3-120sec setting. Timer Switch Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,

5.42.3BESCOM Volume_VI - 5.42.3) 18 SWG MS Box Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 5.42.3) 18 SWG High mast Box Dimension- 1) 75x60x2 2) 75x23x2 3) 60x23x2 Total =15210 Sq.Cm

3.9 BESCOM Volume_VI - 3.9 Hylum plastic sheet Supplyingandfixinghylumplasticsheet3mmthickwithnecessarynitchesforfixingswitches,regulatorsetc.,andfixingonexistingwood or metal box using N. F. screws.

5.01 BESCOM Volume_VI - 5.01) Releasing of 2 Pin cross arm with Insulator and Braces fixing

21.06 BESCOM Volume_VI - 21.06) 35 to 95 Sqmm Sqmm Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 31.05 ) 2.5 to 25 Sqmm

32.15 BESCOM Volume_VI - 32.15) 120 Sqmm, 3.5 Core, (23 GI Strips - 4 x 0.8 mm) UG Cable Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975

6.07 BESCOM Volume_VI - 6.07) Releasing of No. 8 Strain Insulator

35.01 BESCOM Volume_VI - 35.01 Up to 4C x 50 Sqmm Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable