Directorate Of Municipal Administration Tender

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, lapingwelding joints, tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures VOL I for the year 2023-24. I. No. 2.11h P.No.18

Supplying of four bucket stand alongwith buckets. Complete PWD Ele SR 2023-24 . I. No. 15.111 P.No 93

Supplying of Hand gloves. Complete PWD Ele SR 2023-24 . I. No. 15.113 P.No 93

Supplying of first aid box. complete PWD Ele SR 2023-24 . I. No. 15.114 P.No 93

Supplying of SAFETY MASK. complete PWD Ele SR 2023-24 . I. No. 15.115 P.No 93

Supply and installation of 9kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 14.90 Kg, empty weight 5.90 Kg, Can Height 615MM, Diameter 175M M, Discharge Time less than 13Secs, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,8, C and electrically started Fire, A Rating 4A, 8 Rating 348, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 2.00MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including including cost of supporting materials like MS stand & accessaries if it is fixing n floor MS brackets & accessories if it is fixing on wall,including cost of supporting materials like MS stand & accessaries if ited.with regards to general guidelines of fire safety rated doors, MRLL beams, pressure switch, manual change over for doors during emergency, ARD of 10 times with sufficie PWD Ele SR 2023-24 . I. No. 15.5 P.No 63

Supplying, installing, testing & commissioning approved make heavy duty Class C GI pipes and fittings confirming to IS 1239 PI & II, MalleableSpecials such as tees, long radius bends, check nuts, unions, flanges,nipples,etc including cutting, threading, welding/flanged joints with necessary GIwashers, nuts, bolts etc., for pipes running in pipe shafts, ceiling, over terrace etc., as per drawing and specifications. The quoted rate shall include for necessary chasing in walls, making bore in walls etc., and making good the chased surfaces and bores in cement mortar etc. complete. Price isinclusive of Fittings like couplings, reducers, bends, Tees, etc & all fittings. The scope of work included with One coat of yellow etching primer 2 coats of red enamel paint Providing and fabricating MS supports using channel, angle, plates pipes,etc., to take the load of number of pipes and the dia of the pipes as per specification and drawings. Rate quoted shall include for supply and providing necessary welding, cutting, G.I U clamps, bolt nuts, washers, anchors fastener etc., as per specification or pipe supports for horizontal vertical pipes running along wall column, slab trenches etc., to suit different dia pipes made of GI MS rods, flats, etc., consists of strap, nuts washers, threaded rod etc., The rate quoted shall also include for giving one coat of zinc chromate primer and two coats of approved enamel paint for pipe supports. The pipe support shall be U type support using 50x50x6mm requires for supporting 80mm, 100mm and 150mm dia single pipe.The bracket inside the fire shaft shall be 100mm x50x5mm 100 mm dia. PWD Ele SR 2023-24 2023-24. I. No. 15.97.3 P.No. 90

Supplying Installing, testing and commissioning of 100mm dia 2 way Fire brigade inlet connection of 2 nos. 63 mm dia. including cost of materials, labour, usage charges of machinery complete as per specifications.

Supplying, installing , testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete etc complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-incharge of the work 100mm dia CI butterfly valves

Supply, installation, testing & commissioning of diesel engine driven pump, horizontal mounted, Horizontal spiltcase centrifugal single stage pump, capable of delivering required flow at required head when running at 1800 RPM with adequate BHP automatic diesel engine driven pumpset having the residential silencer system and other accessories like fuel tank, necessary radiator cooling system, flanges, neoprene gaskets 16.0 kgsqcm 200 litres fuel storage tank with piping, valves as per detailed specification and two separate starting mechanisms automatic starting by battery power, electric starting motor as well as manual starting by electric start motor common bed plate with anti vibration pads, necessary foundation, foundation bolts etc., 2280 lpm at 120m head

Total Amount Rs.