Directorate Of Municipal Administration Tender

code01 - Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE 1 Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 Mfor fixing Casing pipes only, a, Above 20 M and upto 30 M 15, b, Above 30 M - 3 Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level. 2, A sum of Rs. 100 is to be deducted for Dry Borewell towards yield test. etc. complete

code02 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rigof capacity 300 PSIG & above 1100 CMF & above in all strata includingover burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc.,complete including yield testing at the final depth with a minimum working of compressor for one hour , Excluding cost of casing pipes,collars, cap etc., complete , Above 450m of drilling add 10 for every50m depth. Borewell depth of 0 to 50 Mtrs

code03 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rigof capacity 300 PSIG and above 1100 CMF and above in all strata includingover burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc.,complete including yield testing at the final depth with a minimum working of compressor for one hour , Excluding cost of casing pipes,collars, cap etc., complete , Above 450m of drilling add 10 for every50m depth. 50 100Mtr