Directorate Of Municipal Administration Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 50,000Document Cost
Refer DocumentsTender Fee
₹ 630
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DMA/2024-25/PM/WORK_INDENT27154Bid Award Id
ViewTender No
DMA/2024-25/PM/WORK_INDENT27154Tender Authority
Directorate Of Municipal Administration ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
code04 - Spare Item for 240 HP Pump set:- Supply of Bearing Oil
12
311
3732
... More
code05 - Spare Item for 240 HP Pump set:- Supply of brand New Roller Bearing DE
1
12917
12917
... More
code06 - Spare Item for 240 HP Pump set:- Supply of brand New Ball Bearing NDE
1
126004
126004
... More
code07 - Supplying and fixing 400 Amp 690 Volts Bussmann make semiconductor fuse on existing switch fuse base for 180 HP Non clog submersible pump set with all lead and lift as directed by the Engineer in charge of work.
6
2850
17100
... More
code08 - Rewinding of 3Phase, AC, 415volts, 50Hz, 26.11KW/35HP Submerzed MODY pump for desludging. The work incudes dismantling the motor, discharge head, section side pipe, Sleeve pipe, carefully transport to work shop for repair/rewinding the motor by using suitable gauge enamelled copper wire, insulated with "F" class insulation materials, Replacing of End lead wire and bearings and other accessories. After completing the rewinding work with proper heat treatment,., After dismantling the pump cleaning pump components by Carbon tetrachloride & reconditioning by replacing the bearings, seal, SS.Bolts & nuts. complete repair work, then assembling the Motor- pump & control cables. Testing, commissioning and transporation charges, loading, unloading with all respect including of spare parts cost. (scrap winding copper Repairer/contractor custody) fixing to base frame with proper alignment, testing & commissioning in all respect.
1
115907
115907
... More
code09 - Digital soft starter: Supply, delivery, fixing and commissing at site brand new board approved make or equivalent floor mounting, free standing digital soft starter suitable for 90HP/100HP submersible pumpset. suitable for operation on 3 phase 50Hz, 400/440 volts AC supply fitted with the following specifications: 200 amps MCCB with fixed and moving contracts fitted with U/V release, shunt release and with suitable thermal release. The soft starter shall have adjustable torque control facilitty to start the pumpsets by reducing the starting current less than 1.5 to 2 times the full load current. bulit facilities such as SPP, Over Voltage, Under voltage, Kick start for pump jam conditions, overload, overcurrent etc., for protection of the pumpsets. The starting current shall be controlled by three phase thyristors. The starter shall be provided with minimum 100Amps or suitable capacity by pass contactor. Overload protection, Seal monitor relay for tripping the pumpset in case of failure of mechanical seal. Winding overheating protection for tripping the pumpsets in case of overheating of windings due to clogging of impeller or any other variation in voltage and frequency. Reverse rotation protection to cut off the supply in case of reverse rotation. The pumps shall be controlled by the automatic liquid level controller while the pumps run in auto mode. approved rate 2024-25 Bugudanahalli Raw water
1
172000
172000
... More
code10 - Supplying and fixing PRESSURE REDUCING CONTROL VALVE, F/E. PN.16, Body: Ductile Iron (ASTM A536), Stem: SS, Seat: Brass, Spring: SS 304 (PRV) to existing pipe line the work include removing existing valve complete work as direction of engineer in charge approved rates 2024-25
1
110000
110000
... More
code11 - Repair servicing and overhauling of defected Flocullator paddles by removing all paddles, bots and nuts and removing shaft bush and bearings and replacing the bots nuts and bushes with proper material the work including cutting, welding hoisting, repairing, fixing in position all lead & lift etc., complete. including cost of materials, labour, usage charges of machinery complete as per specifications and as directed by Engineer in charge
3
76900
230700
... More
code12 - Servicing and over hauling of 2/3HP capacity bush button starter unit: works including cleaning off corrosive parts repaint the starter box , replace burnt out/damaged single phase preventer, NO/NC contactor, over load trip coil, and provide Emergency stop button by using proper current rating equipment and provide phase indicator lamps. on starter unit
4
6250
25000
... More
code13 - Repair/Over hauling of Rewinding of 10 HP Capacity Horizontal induction motor The works includes dismantling of the motor from belt pully, inspection /testing with replacing the damaged spares and rewinding the motor by using suitable gauge enamelled copper wire, insulated with F' class insulation materials. Finally re-assembling the motor & transporting to work location & fixing, testing & commissioning with all respect.(scrap copper retained by contractor only)
2
15850
31700
... More
code14 - Over hauling /Servicing Sluice valve Actuators:- Decoupling the faulty Actuator from sluice valve, dismantling the induction motor & safely remove other components such as worm gear shaft, gear, limit switch, ,torque switch, bearing kit& bearing, servicing and overhauling motor , recondition the worn-out gear shaft ,gear with cleaning the corrosive parts by kerosene oil and replacement of Seal Kits, Lock nuts & galvanised bolts and nuts &washers etc,. after complete the repair replacement of components assembling and fixing same with all respect.
1
35350
35350
... More
code15 - Over hauling /Servicing 400 mm Sluice valve:- Dismantling the components from faulty sluice valves , cleaning the corrosive parts by kerosene oil and reconditioning the worn out shaft and spindle with necessary lathe work and replacement of Gasket ,Bolts ,nuts & washers etc after complete the repair replacement of components assembling and fixing same with all respect. Including
i) Releasing & Replacing of worn out/damaged Check nuts in 400mm sluice valves
ii) Releasing & Replacing of work out check plates and adjoining gear wheel.
1
17800
17800
... More
code16 - Attending minor repairs to Sluice Control Valve of 350mm dia placed at filter media for water flow control, removing in complete, washing, providing new rubber bush and gaskets, bolts and Nuts, plug up the leakages, do the welding wherever necessary, overhauling and renovation as directed by the Engineer in-charge rate approved 2020 item no 8
2
5412
10824
... More
code17 - Re-conditioning/re-threading, brazing of Spindle rod and Gun Metal Check nut for 300 mm dia Sluice Valves including cost of materials & Labour work, transportation,alla taxes and duties. The Spindle and Check nut to be supplied shall be suitable for existing sluice Valve fixed in the pipe line. Metal Type Stainless Steel. rate approved 2020 item no 82
1
3900
3900
... More
code18 - Supplying, erection and commisioning of new reduction gear box ( ROTOFLEX with suitable Hp 50 RPM o/p model 23.1 kH, Flange vi type, gear oil filled, hollow input 71 frame, Flange B5 with coupling fitted to O/P shaft) and Electrical AC motor ( Bharat Bijlee of suitable Hp, 4 pole, Flange B5 type motor, 3phase, 415 VAC, 50 Hz, Suitable for above gear box, with required 25 mm Stainless steel shaft and mixing paddles with bottom pivot and as directed by Engineer in charge with all lead & lift etc., complete
1
102980
102980
... More
code19 - Releasing & Rewinding of 3Phase, AC, 415volts, 50Hz, 50HP Horizantal mounting type, Squirrel cage induction Motor. The works includes decoupling of the motor from pump. loading, unloading, Transporting to workshop for repair/rewinding the motor by using suitable gauge enamelled copper wire, insulated with 'F' class insulation materials Replacing of End lead wire and bearings. After completing the rewinding work with proper heat treatment, assembling the motor & transporting to Water Pump House, fixing to base frame with proper alignment, testing & commissioning in all respect. at vidyanagara and kunigal road pump house
1
61500
61500
... More
code20 - Overhauling & Servicing the faulty 40Hp/50 HP 1No's HSC Pump set :- The work includes dismantling the pump from motor coupling includes decoupling, removing upper half casing of the pump, removing DE and NDE, bearings, shaft sleeves implleer after completing service assemble the complet ratoating elements, Re-fixing DE & NDE bearing, impller shaft sleves, bearing housing fixing upper half casing ets complet. Testing & commissioning the pump with all respect(Excluding of spare parts cost) at vidyanagara and kunigal road pump house
1
41500
41500
... More
code21 - Over hauling of LT incommer panel if FCMA/ SOFT starter at PUMP HOUSEL The work includes i) cleaning of corrosive.burnt out bus bar parts and providing 11kv grade insulation on aluminium bus bars ii) Repair of burnt out trip coil, under voltage over voltage relaycomponents, electronic timer. iii) servicing of EARTH LEAKAGE RELAY iv) Replace Burnt out/defunct infunct indication lamps, V) Repalce damaged panel locking system. Testing commissioning as per the instruction of engineer in charges. Item No 29 rate approved Date16-06-2020
2
18962
37924
... More
code22 - Providing water proof electric Welding joint:The Work Includes transporting, loading un loading placing required capacity welding machin to work spot with generator set and providing, welding rods, open the damaged ms pipe portion jointing, testing and commissioning of MS water pipe of minimum 4 mm thick, perfect linking and welding of joints to correct position including cost and conveyance of materials with all lead and lifts.rate approved 2019 item no 50 at Bugudanahalli WTP
2
14130
28260
... More
code23 - Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1no with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCCB 1 No. S/D Starter suitable for respective 50 HP 1 No. Aux contactor 2no+ 2 NC,current transformer CTR 200/5 voltamp, control fuses, bus bar for suitable capacitor bank, control MCB. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the 50HP pump Indoor type, MS frame and painting Complete work NOTE:S-FCMA/Star Delta Starter etc. complete
1
120000
120000
... More
code24 - Supplying, installing & commissioning of 3-pole/suitable, OTM 400E3CM230C/equalent model, base mounted switch-disconnector(change over) with handle for manual operation, terminal bolt kit, handle and spare fuse storage clip and male connector for control circuit. data rate 2021-22 p04 item 45
1
88265
88265
... More
code25 - Work of replacement of faulty control components and modification and rewiring of soft starter panel upto 1250KW/6.6KV motor as specified below: a. Disconnecting the power cables and control cables. b. Removal of faulty control components and cable disconnections. c. Supply and fixing Auxiliary contractors, upto 110Volt DC coil Supply with 2 NO, 2NC. d. Supply and fixing of Electronic Timers, 24 Volt AC Range 0 to 30 seconds. e. Supply and fixing of MCBs, 2 pole, 10A. f. Supply and fixing of suitable color LED indication Bulbs and reset Push Buttons Red in color. g. Supply and fixing of temperature Scanner. Along with RTDs 3.5 Mtr each. h. The necessary tapping/drilling work has to be done for fixing the above components and rewiring to be done etc., i. Testing the soft starter with above supplied components. j. Commissioning the soft starter and handing over the system to department. item no19.13 P-228 V-5 CSR 2023-24 narasapura pump house and kuppuru jackwell
1
72483
72483
... More
code26 - Supply and fixing of 4pole 40A power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. item no 5.14.3 P-16 PWD Elec SR 2023-24
2
6425
12850
... More
code27 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. I 5.48 p-21 PWD Elec SR 2023-24
2
5085
10170.4
... More
code28 - Providing and fixing Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. for chanell i 11.25.2 p-84 V-II CSR 2023-24
370
142
52836
... More
code29 - Removing the old paint from steel and / or other metal surface with hand scraping and making surface even including cost of labour, complete as per specifications i 20.59 p-203 V-II CSR 2023-24
125
127
15881.25
... More
code30 - Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Enginer-in-charge. i 8.36.1 p-47 V-II CSR 2023-24
130
184
24024
... More
code31 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 63mm dia., 6 kg/sqcm & class 3 i 10.1.4 Page - 113 V-5 CSR
40
169
6762
... More
code32 - Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete. Heavy Duty GI pipe of 25mm dia i 11.3.3 Page - 127
80
376
30156
... More
code33 - Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months V-T PUMP IMPELLER AND NECK RING. IMPELLER AND NECK RING for 50 HP to 60 HP i 13.55.2
2
5460
10920
... More
code34 - Repairs to Vertical turbine pumps as per ISI specifiction with guarantee period of not less than 12 months HORIZANTAL PUMP. A) Phosphorous bronze bushes for 40HP to 80HP monoblock motor i 13.56.3 p-161 V-5 CSR 2023-24
2
6090
12180
... More
code35 - BEARING FOR HORIZONTAL PUMP a) For 40 to 80 HP pump bearing i 13.57.3 p-161 V-5 CSR 2023-24
2
4725
9450
... More
code36 - Providing terminal plate as per ISI specifiction with guarantee period of not less than 12 months i 13.52.3 p-160
1
1102
1102.5
... More
code37 - Control Cables and UG Cables: Supplying & Laying cable trays including welding, fixing of supports. Cable tray of 300 mm width (suitable for cable duct of D type) I ii p-120 KPTCL SR 2023-24
8
791
6333.6
... More
code38 - Supply and delivery at site best indigenous brand new power capacitor as
per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location
of respective pump sets I 13.25 P-155 CSR 2023-24 V-5
85
577
49087.5
... More
code39 - Supply and delivery at site Brand new best make PVC insulated cable of
Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990
with ISI Mark and as per its latest amendments. A) 1x3x4 Sqm i 13.22.3 p-154
20
141
2835
... More
code40 - B) 1x3x2.5 Sqm i 13.22.2
20
89
1785
... More
code41 - Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. I 13.26 p-155 per 3 poles=Each
10
1207
12075
... More
code42 - Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump upto 10HP confirming with ISI mark and its latest amendments. I 13.47
1
1837
1837.5
... More
code43 - Providing Ball bearing as per ISI specifiction with guarantee period of
not less than 12 months Bearing cost for 50 HP i 13.50.8
1
6562
6562.5
... More
code44 - Providing thrust bearing as per ISI specifiction with guarantee period
of not less than 12 months Bearing cost for 50 HP i13.51.3
1
8925
8925
... More
code45 - Manufacturing, providing, trasporting, rolling, lowering, laying,
jointing and commissioning of ERW (Electric Resistance Welded)/
SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade)
conforming to IS 3589-2001 with latest amendments, including perfect
linking and welding of joints to correct position, cost of the pipes,
conveyance, lead, lift charges, cost of all labour and giving satisfactory
hydraulic test as per IS 3589-2001 with latest amendments for test
pressure and working pressure both at factory and site etc. complete
as per detailed specifications inside with CM 1:1.5 lining of minimum
10mm thick for pipes upto 610mm OD and with minimum 12mm thick
beyond 610mm OD and out side with minimum 25mm thick coating in
CM 1:3 over 50 x 50mm weld mesh of 13 gauge, including loading and
unloading of pipes for the following diameters and specified thickness of
plate as noted below, including bailing out of water wherever necessary.
(Contractor will make his own arrangements for procuring water for
testing). For MS Pipes of 219mm dia
Note: a) No Negative tolerance in respect of thickness is pemissible.
b) Basic Cost of MS Plate is considered as Rs.71,700/- per MT
c) The pipe costs are FOR destination anywhere in Karnataka. Pipe of 323.9mm dia -6.0mm thick i 5.3.2 Page - 60
3
6590
19772.7
... More
code46 - Providing, fabricaing and fixing at site various diameters of MS Flanges
as per IS standards to fix sluice valves as per sketch. The rate to include
cost of all materials, labour, consumables, hire charges for tools and
tackles, weldiing equipments etc. complete as per instructions of the
Engineer in charge for: Flanges of 300mm dia and 16mm thick. i 5.30.10 Page - 66
4
3640
14561.6
... More
code47 - Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of
variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865
with the latest amendments and of grade GGG 40/50, shaft of stainless
steel, wedge fully rubber lined with EDPM seals of NBR and the valves
should be vacum tight and 100% leak proof with face to face dimensions
as per IS 14846-2000 with the latest amendments only. The stem sealing
should be with toroidal sealing rings (minimum 2 " O " rings). Body and
bonnet should be coated with Electrostatically applied Epoxy Powder
Coating with minimum coating thickness of 250 micron both inside and
outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts
& nuts and rubber insertions etc. but excluding earth work. For PN-10:
(Note: TP set should be considered only for DI pipes estimate. For MS
pipes estimates, TP sets cost of corresponding dia shall be deducted from
the SR rates of valves and provision for corresponding dia MS flanges
should be made in the estimate.) etc. complete For sluice Valve of PN 16.0 and 300mm i 2.24.7 Page - 23
1
73966
73966
... More
code48 - Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual
plate check valve Conforming to API 594 with latest amendments Shaft
material shall be SS420/431 and spring shall be spring steel superior
grade quality as detailed below of following diameters and types and
conveying to work site, loading, unloading, stacking with appurtenances.,
complete with all lead and lift. The rates are inclusive of cost of Galvanised
Bolts and Nuts: For class 300 etc. complete 300mm i 2.27.6 Page - 25
1
32045
32045
... More
code49 - The lifting of submersible pumpset from well. I 13.3.20 Page - 149
2
1575
3150
... More
code50 - The Labour charges only for overhauling i 13.3.21 Page - 149
2
3150
6300
... More
code51 - Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch)
suitable for bore well confirming to IS 8034-2000 specifications, to work
site with testing of as per instructions of engineer incharge of work and
latest amendments etc. complete. 1.00 HP/0.75KW 7 STG i 13.6.1 Page - 149
1
13984
13984
... More
code52 - Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE:
2) S-D- Star Delta Starter etc. complete. 6 to 15 HP pumps i 13.24.3 Page - 155
1
18375
18375
... More
code53 - Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 70 Sqmm, 3.5 Core, (18 GI Strips - 4 x 0.8 mm) i 32.13 p-13 ESCOMs SR 2023-24
0.01
333808
3338.08
... More
code54 - Labour charges for laying of 1.1 KV class UG cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. A) 35 to 95 Sqmm i 21.06
0.01
32696
326.96
... More
code55 - Supplying Heavy Duty Copper Terminal Long Barrel 70 Sqmm Copper Terminal, Apprx Wt: 38 Gm i 59.04 p-26
12
93
1121.4
... More
code56 - Removing silt and slush from dewatering pit, draft tube, tail race pond, cooling towers etc., by mechanical means/manually including multiple handling wherever necessary and stacking etc., complete with all leads and lifts. (For Power House and Allied works) i 18 Page - 197 WRD V-IV CSR 2023-24 V=pir2h=3.141x2x2x2
38
582
22144.5
... More
code57 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50 m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately). M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates item no.2.4.2 p-17
2
6568
13137.6
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements