Directorate Of Municipal Administration Tender

code04 - KSRB5.2-3: Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of conforming to IS 2185 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(SR 2023-24 Item no. 6.34 of page no. 17 Part-II)

code05 - KSRB 4.6.1:Providing and removing centering, shuttering, struttiing propping etc.,and removal of formwork for sides and soffits of beams,beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour cmplete as per specifications.Specification no...(SR 2023-24 Item no. Addendum-1 of page no. 112)

code06 - KSRB 4.2.2:Providing & laying in position reinforced cement concrete of design mix M25 with OPC cement with 20mm and down size graded granite metal coarse aggregates and fine aggregates with superplastisizers confirming to IS9103-1999 Reaffirmed 2008, machine mixed ,concrete laid in layers not exceeding 15cm thick, vibrated for all works in foundation plinth and ground floor level for roof slabs ,staircase,lintels ,retaining walls ,return walls,walls (any thickness) including attached pilasters,columns,piers,abutments,pillars,posts,struts,buttresses,string or lacing courses,parapets,coping,bed blocks,anchor blocks,plain window cills,fillets etc. including cost of all materials, labour, HOM of machinary,curing, complete as per specifications.Specification no(SR 2023-2024 Item no. 2.1 of page no. 15&16)

code07 - KSRB4.9.2:Providing TMT steel reinforcement for RCC work including straightening, cutting, bending , hooking, placing in position, lapping and /or welding wherever required ,tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design.(laps and wastage shall not be measured and paid) cost of materials,labours ,HOM of machinery complete as per specifications.Specification no SR 2023-2024 Item no. 2.11 of page no. 18)

code08 - Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering, providing & removing scaffolding including cost of materials,labour ,curing complete as per specifications.- For Ground Floor Item No 8.1.1 of page no 41 of SR 2023-2024

code09 - KSRB 14.14-5: Providing Ceramic tiles of approved make,shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing with white cement using colour pigment , including cost of materials, labour, curing, complete as per specifications. - for Ceramic Tiles 400 x 400mm on a bed of 20mm thick P. no 60 I. No 9.10 of SR 2023-24

code10 - KSRB 14-17.2 : Providing skirting, dado, rises of steps with colour glazed tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface ( excluding cost of rough plastered surface which should be measured and paid separately) using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Specification No.KBS 14.16, 14.17 - Colour glazed tiles 30x60 cms 6mm thick with border of size 30 x 10 cms. P. no 65 I. No 9.39 of SR 2023-24 Part II

code11 - Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rub bing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent..-For Ground Floor item No 9.23 of page no 63 of SR 2023-24

code12 - Providing and applying two coats of wall putty to inside plastered walls and ceiling using white cement putty .Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers including cost of all materials cost of labour and scaffolding etc complete as per section Item No Item No:8.51 of Page No-43 SR 2023-24

code13 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Item No:8.51 of Page No-43 SR 2023-24 PART II

code14 - Providing and fixing 65mm X 90mm GRP doorframe fabricated using E-Glass chopped strand mat (CSM). U.V- stabilized isopthalic gel coat and isopthalic resin. The thickness of the GRP skin shall not be less than 2.0 mm. The doorframe consists of four segments, which are provided with plug - in - socket arrangement in - situ in the mould. The segments are plugged in and are joined together by means of screws.The GRP frame shall be provided with wooden reinforcement of 6 locations for igh screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam / plaster with fibre reinforcement.Six nos of 260mm X 25 mm X 5mm size S shapped M.S. flat hold fast shall be provided with the frame.-For Ground Floor Item No 12.96 of page no 112 of SR2023-24

code15 - Providing and fixing factory made single leaft rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V-stabilized Isopthalic Gelcoat and on layer of 450 gsm E-Glass Chopped strand Mat (CSM), impregnated with orthopthalic polyster resin. The thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam panel of 29mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc, shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to RV/TIFAC Composites Design centre Standards and specifications and the door shutters tested in confiramation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments. Exclusing cost of fixtures and inclusive of supply of shutters to respective work spot.- For Ground Floor Item No 12.97 of page no 112 of SR 2023-24

code16 - KSRB 7.14 : Providing, fabricating, assembling and fixing in position aluminium partitions using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 101.6mm x 44.45mm, 3.18mm.thick having section weight, plain sections 2.40kg/m single grove section 2.541kg/m. and double grovesection 2.683 kg/m and bottom 46 kg/m; aluminium louvres of size 77.6mmx27.6mm 1.7mm. thick section weight 0.483kg/m; bottom portions provided with 12mm. thick prelaminated sheet both side of approved colour lamination exterior grade; aluminium sections of mat finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c; sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and rivetted to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns or masonry on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chistling and making good with cement mortar to match the surface, providing and fixing bottom panel filled with the materials to a height of 0.9m. from floor level; and 5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top panel with lower sections, the glass and panels fitted with glazing clips of 19mmx17.3mm. with thickness of 0.9mm. weight 0.124kg/m; aluminium sections pre-treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars or any other sticky materials; vertical members embedded in the flooring by making suitable size holes and fixing with cement mortar, with necessary opening for fixing of doors of standard size (excluding cost of door opening) All the frame should be throughly cleaned free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality. ((P.No.35/I.No. 7.14.2 of CSR 2018-19)

code17 - KSRB 7.17 : Providing, fabricating, assembling and fixing in position aluminium doors using following aluminium mat finish or glossy finish, outer frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg/m, top section 47.62x44.45mm thickness 3.00mm, section weight 1.426kg/m bottom section 114.3x44.45 thickness 3.18mm, section weight 2.646kg/m, door central section 49.91x44.45mm thickness 3.00mm, section weight 1.495 kg/m glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections cut to length joint metred cornersgrinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m. thick plain glass for top and bottom panel; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherance of mortars or any other sticky materials; the assembled frame fitted with the corner angles, strips and fitted with screws, rawl plugs or teakwood gutties to R.C.C. columns or masonry on sides. beams and flooring in bottom. including cutting, chistling and making good with cement mortar to match the surface; all the frames throughly cleaned free from rust, scale, or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. using aluminium section anodized to 12 - 15 microns.

code18 - KSRB11-5:Providing and fixing White Vitreous China Clay ,water closet European type (Pedestal type-P-trap) with black soild plastic seat and lid,C.P brass hinges ,rubber buffers.10 litre low level ,p.v.c flushing cistern(all are approved make) with fittings,C.I/M.S brackets,40mm diameter flush bend with fittings and clamps ,overflow arrangements with special and 25mm mosquito proof coupling of approved design ,painting of fiitings and brackets,cutting and making good the wall and floor wherever required ,including cost of materials,labour complete as per specificatios.Specification No.KBS11(Item No 14.3 of Page No 131 of SR2023-24)

code19 - KSRB11-11.2:Providing and fixing White Vitreous China Clay flat black wash basin size 630X450 mm with a single 15mm C.P brass pillar tap withC.I/M.S brackets ,32mm C.P brass waste of standard pattern,painting of fittings and brackets,cutting and making good the wall and floor wherever required ,including cost of materials,labour complete as per specificatios.Specification No.KBS11(Item No 14.7.8 of Page No 133 of SR 2023-24)

code20 - Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including paintingof fittings and cutting and making good the walls and floors wherever required : (P.No. 132, I.No. 14.5 of PWD SR 2023-24)

code21 - KSRB13-6.1-1:Providing and fixing in position brass bib cock of approved quality 20mm nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specifications.Specifications No.KBS 13.2.2/13.3(Item No.13.24 of Page No 96 of SR2018-19)

code22 - KSRB13-6.2-1:Providing and fixing in position brass stop cock of approved quality 20mm nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specifications.Specifications No.KBS 13.2.2/13.3(Item No.13.24 of Page No 96 of SR2023-24)

code23 - KSRB13-6.3-6:Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end )32mm nominal bore including cost of all materials ,labour and HOM of equipments with all leads complete as per specifications.Specification No.KBS 13.2.6/13.3(Item No 13.35 of page No 98 of Sr 2018-19)

code24 - KSRB13-6.3-6:Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end )20mm nominal bore including cost of all materials ,labour and HOM of equipments with all leads complete as per specifications.Specification No.KBS 13.2.6/13.3(Item No 13.33of page No 91 of Sr 2018-19)

code25 - KSRB13-10.1Providing and fixing to wall ceiling and floor unplasticised PVC pipes 6.00kgs/sq.cm working pressure with pipe fittings,wallclips making good the wall ceiling and floor including cost of all materials ,labour charges,HOM of equipment and testing complete as per specification Item No 13.49 of SR 2023-24 page no 125 12.116.1-110mm

code26 - KSRB13-10.1Providing and fixing to wall ceiling and floor unplasticised PVC pipes 6.00kgs/sq.cm working pressure with pipe fittings,wallclips making good the wall ceiling and floor including cost of all materials ,labour charges,HOM of equipment and testing complete as per specification Item No 13.49 of SR 2023-24 page no 12512.116.3 160mm

code27 - KSRB 12-8.1 : Constructing brick masonry inspection chamber 600x600mm, and 450mm depth. (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty) 455x610mm internal dimensions. total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement concrete 1:2:4 mix 20mm and downsize granite metal, foundation concrete 1:5:10 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. item no 13.55.2 of page no 127 of SR 2023-24 600X600 -450mm depth

code28 - KSRB 12-8.1 : Constructing brick masonry inspection chamber 600x600mm, and 450mm depth. (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty) 455x610mm internal dimensions. total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement concrete 1:2:4 mix 20mm and downsize granite metal, foundation concrete 1:5:10 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. item no 13.55.2 of page no 127 of SR 2023-24 450X300 -450mm depth

code29 - Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00mtr spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chasing and making googd the same including testing of joints complete.(Concealed work incluidng cutting chases and good the vwall etc)item no 13.31.2 of page no 122 of SR 2023-24 13.86.2 20 mm dia

code30 - Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00mtr spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chasing and making googd the same including testing of joints complete.(Concealed work incluidng cutting chases and good the vwall etc)item no 13.31.2 of page no 122 of SR 2023-2413.86.3 25mm

code31 - Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00mtr spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of trenching,refilling and testing of joints complete(External Work) item no 13.31.2 of page no 122 of SR 2023-2413.87.3-25mm

code32 - Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00mtr spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of trenching,refilling and testing of joints complete(External Work) item no 13.31.2 of page no 122 of SR 2023-2413.87.4 32 mm dia

code33 - Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00mtr spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of trenching,refilling and testing of joints complete(External Work) item no 13.31.2 of page no 122 of SR 2023-24 13.87.6 50mm

code34 - Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00mtr spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of trenching,refilling and testing of joints complete(External Work) item no 13.31.2 of page no 122 of SR 2023-24 13.87.7 62.50mm

code35 - Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00mtr spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of trenching,refilling and testing of joints complete(External Work) item no 13.31.2 of page no 122 of SR 2023-2413.87.8 75mm

code36 - Providing and fixing CI Nahani Trap of approved make confirming to ISI speciifications and construction of cistern in M-15 as per directions (Rate is inclusive of cost of materilas and fixtures and conveyance of materials to work spot.) Item no 12.113.1 of SR2023-24 page no 88

code37 - Point wiring using copper wire without switch : Supplying and wiring adopting loop system in existing PVC Conduit / casing caping using copper PVC insulated multi strand copper wire with a 6Amps flush type SP control switch shall be fixed on the exisisting plastic sheet/ gang box, the othe ind of the wires shall be terminated with sufficient loose length in a wood/ PVC round block. complete for each outlet. Short point upto 3mtr form tapping point to out let via switch (Refer KPWD SR 2023/24 Page 5 Sl. No. 2.2.1)

code38 - Point wiring using copper wire without switch : Supplying and wiring adopting loop system in existing PVC Conduit / casing caping using copper PVC insulated multi strand copper wire with a 6Amps flush type SP control switch shall be fixed on the exisisting plastic sheet/ gang box, the othe ind of the wires shall be terminated with sufficient loose length in a wood/ PVC round block. complete for each outlet. Medium point above 3Mtr upto 6mtr from tapping point to outlet via switch (Refer KPWD SR 2023/24 Page 5 Sl. No. 2.2.2)

code39 - Point wiring using copper wire without switch : Supplying and wiring adopting loop system in existing PVC Conduit / casing caping using copper PVC insulated multi strand 2*1.5Sqmm copper wire with a 6Amps flush type SP control switch shall be fixed on the exisisting plastic sheet/ gang box, the othe ind of the wires shall be terminated with sufficient loose length in a wood/ PVC round block. complete for each outlet. Two outlet in a row, above 3mtr upto 6mtr from tapping point to out let via switches . (Refer KPWD SR 2023/24 Page 5 Sl. No. 2.2.4)

code40 - Concealed Conduit System : Supplying….mm dia 2mm 2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, metal/ PVC junction boxes adhesive paste etc., and running before concreting the salb. The conduit should be tied to the reinforecement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with18 SWG GI fish wire wherever necessary. 19/20mm dia 2mm thick (Refer KPWD SR 2023/24 Page 2 Sl. No. 1.2.1)

code41 - Groove cutting : Supplying...dia 2mm/2.5mm thick heavy gauge PVC Conduit pope with bends, metal junction boxes adhesive paste etc., and bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever neccessary.19/20mm dia 2mm thick (Refer KPWD SR 2023/24 Page 2 Sl. No. 1.3.1)

code42 - Groove cutting : Supplying...dia 2mm/2.5mm thick heavy gauge PVC Conduit pope with bends, metal junction boxes adhesive paste etc., and bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever neccessary. 25mm dia 2m thick (Refer KPWD SR 2023/24 Page 2 Sl. No. 1.3.1)

code43 - Wiring for lighting/ power circuit using one of PVC insulated 1100v grade, multis and Copper conductor single core cable in open or concealed system of wiring.1.5 sqmm (Refer KPWD SR 2023/24 Page 5 Sl. No. 2.3.2)

code44 - Wiring for lighting/ power circuit using one of PVC insulated 1100v grade, multis and Copper conductor single core cable in open or concealed system of wiring.2.5 sqmm (Refer KPWD SR 2023/24 Page 6 Sl. No. 2.3.3)

code45 - SWITCHES, SOCKETS & ACCESSORIES. Supplying and flush mounting powder coated / galvanised metal box suitable for mountting modular switch plates. The box should be firmly mounted after due groove cutting in Brick/Stone/C.C. wall 1 - 3 Way (Refer KPWD SR 2023/24 Page 9 Sl. No.3.4.1)

code46 - SWITCHES, SOCKETS & ACCESSORIES. Supplying and flush mounting powder coated / galvanised metal box suitable for mountting modular switch plates. The box should be firmly mounted after due groove cutting in Brick/Stone/C.C. wall 6 Way (Refer KPWD SR 2023/24 Page 9 Sl. No.3.4.3)

code47 - SWITCHES, SOCKETS & ACCESSORIES. Supplying and flush mounting powder coated / galvanised metal box suitable for mountting modular switch plates. The box should be firmly mounted after due groove cutting in Brick/Stone/C.C. wall 8 Way (Refer KPWD SR 2023/24 Page 9 Sl. No.3.4.4)

code48 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 1 to 3 Module (Refer KPWD SR 2023/24 Page 9 Sl. No.3.5.1)

code49 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 6 Module ( Refer KPWD SR 2023/24 Page 9 Sl. No.3.5.3)

code50 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 8 Module (Refer KPWD SR 2023/24 Page 9 Sl. No.3.5.4)

code51 - Supplying and fixing of Modular Switch / Socket / Stepped type electronic fan regulator / dimmer / telephone socket etc on existing modular Switch Plate. IS 3854 & IS 1293. 6A one way (Refer KPWD SR 2023/24 Page 10 Sl. No.3.6.1)

code52 - Supplying and fixing of Modular Switch / Socket / Stepped type electronic fan regulator / dimmer / telephone socket etc on existing modular Switch Plate. IS 3854 & IS 1293. 6A three way socket. (Refer KPWD SR 2023/24 Page 10 Sl. No.3.6.3)

code53 - Supplying and fixing of Modular Switch / Socket / Stepped type electronic fan regulator / dimmer / telephone socket etc on existing modular Switch Plate. IS 3854 & IS 1293. Stepped Fan Regulator. (Refer KPWD SR 2023/24 Page 10 Sl. No.3.6.4)

code54 - Supplying and fixing of Modular Switch / Socket / Stepped type electronic fan regulator / dimmer / telephone socket etc on existing modular Switch Plate. IS 3854 & IS 1293. 16A one way switch.(Refer KPWD SR 2023/24 Page 10 Sl. No.3.6.8)

code55 - Supplying and fixing of Modular Switch / Socket / Stepped type electronic fan regulator / dimmer / telephone socket etc on existing modular Switch Plate. IS 3854 & IS 1293. 6/16A Universal Socket.(Refer KPWD SR 2023/24 Page 10 Sl. No.3.6.11)

code56 - Supplying and fixing of Modular Switch / Socket / Stepped type electronic fan regulator / dimmer / telephone socket etc on existing modular Switch Plate. IS 3854 & IS 1293. RJ 45/IO Outlet Cat 6(Refer KPWD SR 2023/24 Page 10 Sl. No.3.6.13)

code57 - CONTROL SWITCH GEARS & ACCESSORIES. Supplying and fixing miniature circuit breaker on existing MCB distribution board using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring confirming to IEC 60898. 5 - 32 Amps SP (Refer KPWD SR 2023/24 Page 27 Sl. No. 5.17.1)

code58 - CONTROL SWITCH GEARS & ACCESSORIES. Supplying and fixing miniature circuit breaker on existing MCB distribution board using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring confirming to IEC 60898. 6-32A 2 pole MCB (Refer KPWD SR 2023/24 Page 28 Sl. No.5.17.4)

code59 - Supplying and fixing regular MCB distribution board on wall/ flush mounting using required clamps, bolts, nuts, etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase/ single door with powder coated painting etc., complete. Made out of 14 SWG MS enclosure. 8 way TP & N (Refer KPWD SR 2023-2024 Page 28 Sl. No. 5.18.11) 4 way SPN (Refer KPWD SR 2023-2024 Page 28 Sl. No. 5.18.1)

code60 - Fixing Charges. Fixing all types and all capacities of flouroscent / false ceiling / spot light / CFL / LED fittings on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos. of round blocks & clamps. On wall / ceiling / rafter / girders. (Refer KPWD SR 2023/24 Page 79 Sl. No.14.7.1)

code61 - Fixing Charges. Fixing all types and all capacities of flouroscent / false ceiling / spot light / CFL / LED fittings on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos. of round blocks & clamps. Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps ceiling rose, necessary length of 23/0.0076 inch PVC insulated twin twisted copper wire and wiring. (Refer KPWD SR 2023/24 Page 80 Sl. No.14.8)

code62 - Fixing Charges. Fixing all types and all capacities of flouroscent / false ceiling / spot light / CFL / LED fittings on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos. of round blocks & clamps. Fixing all types and Fixing halegen/LED/MH/svl/il/led FLOOD LIGHT FITTING on existing Pole /wall ceiling including lamps ,blts,nuts and wiring usiing suitable capacity wires (Refer KPWD SR 2023/24 Page 79 Sl. No.14.5)

code63 - Fixing Charges. Fixing all types and all capacities of flouroscent / false ceiling / spot light / CFL / LED fittings on the wall / ceiling / rafters / girders using 23/0.0076 twin twisted PVC insulated wires, required nos. of round blocks & clamps. Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and coloring to match the existing wall or brackets with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame if required.(Refer KPWD SR 2023/24 Page 79 Sl. No.14.12)

code64 - Supplying and fixing of Metal Fan Box with Round Hook. (Refer KPWD SR 2023/24 Page 3 Sl. No. 1.12)

code65 - Supplying and drawing UTP-Cat 6E Lan Cable Refer KPWD SR 2023/24 Page 54 Sl. No. 9.1)

code66 - Supply of Fixture/ Fans Supplying ---- feet --- PVC batten with integrated LED tube ---- watt with high quality deffuser with life of 25000 burning hours & lumen maintenence with CRI .2 year warranty againest any manufacturing defect LED light fitting 1 x4' -20/22watt - (Refer KPWD SR 2023/24 Page 64 Sl. No.12.2.2)

code67 - Supply of Fixture/ Fans Supplying ---- feet --- PVC batten with integrated LED tube ---- watt with high quality deffuser with life of 25000 burning hours & lumen maintenence with CRI .2 year warranty againest any manufacturing defect Supply and fixing of LED Bulb - 12 watt (Refer KPWD SR 2023/24 Page 68 Sl. No. 12.11.5)

code68 - Supply of Fixture/ Fans Supplyingfeet PVC batten with integrated LED tube watt with high quality deffuser with life of 25000 burning hours & lumen maintenence with CRI .2 year warranty againest any manufacturing defect Supplying exhaust fan of 1440 RPM of 300mm size with bracket blades complete suitable light duty for operate on 230V 50Hz, AC supply. (Refer KPWD SR 2023/24 Page 46 Sl. No.7..1)

code69 - Supply of Fixture/ Fans Supplying feet PVC batten with integrated LED tubewatt with high quality deffuser with life of 25000 burning hours & lumen maintenence with CRI .2 year warranty againest any manufacturing defect SupplyingSweep (1200mm)capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles, Single phase AC supply conforming ot ISS-374-1979 and with double ball bearing system. (Refer KPWD SR 2023/24 Page 46 Sl. No.7.3.1)