Directorate Of Municipal Administration Tender

PWD CSR 2023-24, VOL-1, Page -16, Item No 2.3.1 - Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-1, Appendix-I Page 115) - Formwork As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate. Consider 8% of item concrete rate for Isolated Foundation upto Plinth ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-2, Page -09, Item No 5.4 - Providing Size Stone masonry with hard stone in foundation & plinth withCement mortar 1:6 (1 cement : 6 coarse sand)ons. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-1, Page -16, Item No 2.3.1 - Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-1, Appendix-I Page 115) - Formwork As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate. Consider 70% of item concrete rate for Columns of Building ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-1, Page -16, Item No 2.3.1 - Formwork As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate. Consider 50% of item concrete rate for Plinth/Beam of Building ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-1, Page -16, Item No 2.3.1 - Formwork As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate. Consider 50% of item concrete rate for Roof Slab ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-2, Page -13, Item No 6.2 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD SRRB 2023-24, VOL-1, Page -18, Item No 2.11(a) - Supplying, Fitting and Placing Thermo-Mechanically Treated bars of grade Fe-500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-2, Page -41, Item No 8.1.1 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-2, Page -41, Item No 8.1.1 - Providing 15 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-2, Page -46, Item No 8.33.1 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-2, Page -46, Item No 8.33.2 - Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-2, Page -82, Item No 11.16.1 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD CSR 2023-24, VOL-2, Page -47, Item No 8.33.1 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD Electrical 2023-24, VOL-6, Page -4, Item No1.1 - Supplying heavy gauge PVC conduit pipe 32 dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws..(Item No. 1.1.3, Page No.4,PWD Electrical SR Vol-06) ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD Electrical 2023-24, VOL-6, Page -6, Item No2.5 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 .(Item No. 2.5.1, Page No.6,PWD Electrical SR Vol-06)3C X 4 mm2 ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD Electrical 2023-24, VOL-6, Page -8, Item No3.4 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way (Item No. 3.4.5, Page No.8,PWD Electrical SR Vol-06) ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD Electrical 2023-24, VOL-6, Page -8, Item No .5 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module (Item No. 3.5.5, Page No.8,PWD Electrical SR Vol-06) ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD Electrical 2023-24, VOL-6, Page -9, ItemNo3.1 - Supplying and fixing of metal clad industrial plugs and sockets. ,(Item No. 3.13.1, Page No.9,PWD Electrical SR Vol-06) 2pole+earth 250V PLUG 16A ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD Electrical 2023-24, VOL-6, Page -10, ItemNo3.1 - Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board,(Item No. 3.14.1, Page No.10,PWD Electrical SR Vol-06) 6A SP Switch ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD Electrical 2023-24, VOL-6, Page -10, ItemNo3.1 - Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board,(Item No. 3.14.3, Page No.10,PWD Electrical SR Vol-06) 6A Three Way 5 Pin Socket ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD Electrical 2023-24, VOL-6, Page -16, ItemNo5.1 - Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2. 4 Way (Item No. 5.17.1, Page No.16,PWD Electrical SR Vol-06) ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.

PWD Electrical 2023-24, VOL-6, Page -21, ItemNo5.4 - Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA 16 - 32 A SP (Item No. 5.46.1, Page No.21,PWD Electrical SR Vol-06) ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work.