Directorate Of Municipal Administration Tender

code04 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates P.No.16, I.No.2.51 (PWD SR 2023-24 Vol-3)

code05 - Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge P.No.44, I.No.8.19.1 (PWD SR 2023-24 Vol-2)

code06 - Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. P.No.7, I.No.1.11 (PWD SR 2023-24 Vol-1)

code07 - Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work P.No.13, I.No.6.4 (PWD SR 2023-24 Vol-2)

code08 - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. P.No.41, I.No.8.4.1 (PWD SR 2023-24 Vol-2)

code09 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge P.No.50, I.No.8.51 (PWD SR 2023-24 Vol-2)

code10 - Distempering with dry distemper of approved brand and manufacture (two coats) of required shade on new work, over and including water thinnable priming coat to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge P.No.45, I.No.8.24 (PWD SR 2023-24 Vol-2)

code11 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge P.No.47, I.No.8.33.3 (PWD SR 2023-24 Vol-2)

code12 - Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished with floating coat of neat cement mixed with red oxide ( mix of same proportion ) , including cost of materials, labour, curing, complete as per specifications. P.No.64, I.No.9.37 (PWD SR 2023-24 Vol-2)

code13 - Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS2509 with suitable size bends, junction boxes, adhesive pasteetc, and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/stone structure orrawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25 mm dia 2 mm thick P.No.2, I.No.1.1.2 (PWD ELE SR 2023-24 Vol-6)

code14 - Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes forcable/conduit entry as required with one coat of primer of approved make etc P.No.2, I.No.1.4.2 (PWD ELE SR 2023-24 Vol-6)

code15 - Wiring for lighting/powercircuitus in gone of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in openor concealed system of wiring with specifiedIS-694:2010 2.5 mm2 P.No.5, I.No.2.3.3 (PWD ELE SR 2023-24 Vol-6)

code16 - Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switchplates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5 Way P.No.8, I.No.3.4.3 (PWD ELE SR 2023-24 Vol-6)

code17 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos.of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module P.No.8, I.No.3.5.4 (PWD ELE SR 2023-24 Vol-6)

code18 - Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230V, 50Hz AC supply & completely wired on existing box. P.No.9, I.No.3.7 (PWD ELE SR 2023-24 Vol-6)

code19 - Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A SP Switch P.No.10, I.No.3.14.1 (PWD ELE SR 2023-24 Vol-6)

code20 - Supplying & fixing of retro fit type-LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT6500 degree K,CRI GREATER THAN 70%. efficacy GREATER THAN 80 lumenper W, life GREATER THAN 25000 burning hour sand Compliance to IS 10322/IEC60598, LM79&LM80. The LED are driven by HF electronic driver integrated in the system, with PF GREATAR THAN 0.95, power loss should LESS THAN 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD lessthan 20%, Life as per LM79. The operating input voltage should be between 130 to 275V. BIS Approved and Tested by NABL/CPRI ac credited laboratory with 2years Warranty against any manufacturing defect working under standard electrical condition. 18W 6500K

code21 - Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. P.No.77, I.No.11.2 (PWD ELE SR 2023-24 Vol-2)

code22 - Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. P.No.78, I.No.11.6.1 (PWD ELE SR 2023-24 Vol-2)

code23 - Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. P.No.79, I.No.11.11.1 (PWD ELE SR 2023-24 Vol-2)

code24 - Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification P.No.18, I.No.2.11(h) (PWD ELE SR 2023-24 Vol-1)

code25 - Providing & fixing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m² P.No.21, I.No.7.1.1 (PWD ELE SR 2023-24 Vol-2)