Directorate Of Municipal Administration Tender

HMASK04 - Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure /Superstructure complete as per Drawing and Technical specifications. (9.3) bars Fe 500 (p w d sr2021-22 volno01p.no15 ,i.no2.1.2 )

HMASK05 - KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses cost of all materials, labor complete as per specifications. Specification No. KBS 4.6.2 (P.No-15, I.No-4.31)

HMASK06 - Fabricating, supplying and erection of . m s long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom . mm , top. mm with 3 mm thick, suitable base plate and 4Nos of . long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended.P.No11,IT.No4.2.7 SR2023-24

HMASK07 - Supplying, fixing and wiring earth electrode for grounding of lifts, transformers, DG sets e t c using 40mm di a 2.9mm thick 2.5 m t r long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm di a and the electrode should be covered 150mm around with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.( Item no 6.2 of page no 40 2023-24)

HMASK08 - UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruded Inner Sheath Armored LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armoring strip thickness and resistivity as per IS-3975 25 S q mm, 4 Core, (15 GI Strips - 4 x 0.8 mm (BESCOM SR - Part-III . I No 32.08 2023-24)

HMASK09 - Labor charges for laying25 s q mm to 75 s q mm of 1.1. KV class UG cable in existing trench GI pipe / stoneware pipe / on wall /on pole as required.(P.No.41,Sl No 6.5.2of p w d SR 2019/20

HMASK10 - Earth Earth work excavation for cable trench of 0.5 to 0.75 M t r Width and Depth up to 1 M t r including trial pits, depositing on bank up to a lead of 50 M t r Supplying and Displaying necessary Danger Boards and Lighting Using sight Rails and Sign Boards at every 100 M t r wherever necessary as directed. (BESCOM SR Part-IV I No 29.03 2022-23

HMASK11 - Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm around the cable Item no 6.7 of page no 41 of p w d SR 2019/20

HMASK12 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 S q mm (BESCOM SR - Part-IV . I No 31.05 2022-23)

HMASK13 - Fabricating ,supplying and mounting MS box made out of 16 SWG steel sheet enclosure suitable for wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with suitable approved color powder coated paint. (P.NO 19 Item. NO 5.42.2 CSR 2022-23.)

HMASK14 - Supply and fixing of 4pole power contactor of 40 amps with NO/NC contacts on existing wood/panel board using necessary screws, bolts, nuts, washers and wiring e t c complete with AC-3 Rating and as per IS-13947. (P. No. 14, S l no .5.13.2 CSR 2022-23)

HMASK15 - Supplying and fixing Microprocessor based timer (with out contactor) using necessary screws, bolts, nuts, washers and wiring e t c complete. (P. No. 32, S l no .5.48 CSR 2022-23

HMASK16 - Supplying and fixing of MODULAR MCB Devices (tripper) with breaking capacity of 6KA TP 63 Amps ( P. no. 31 S l no 5.46.5 CSR 2022-23)

HMASK17 - Supplying, fixing and wiring Electronic Trisector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.( P. no.18 S l no 5.35 CSR 2022-23)

HMASK18 - Supplying and fixing 32 amps porcelain fuse channel with cut out on existing wooden / panel using necessary nuts, bolts and washers(.Item no 5.7.2 of page no 13 CSR 2022-23)

HMASK19 - Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each (BESCOM SR - Part-III. I No 54.02

HMASK20 - Good Quality Salt for grounding purposes packed in 50 Kg gunny bag (BESCOM SR - Part-III. I No 54.03)

HMASK21 - Digging of Pit for providing GI Pipe type Earthing Hard Soil (BESCOM SR - Part-IV . I No1.6.2

HMASk22 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.The following additional tests are compulsory either to be conducted at works or independent lab with witness by inspecting authority.Additional Tests for FRLS-Applicable Standard Oxygen Index -IS 694-1990, Clause 16.8 Temperature Index -IS 694-1990, Clause 16.13 Smoke Density -IS 694-1990, Clause 16.14 Test for Halogen Acid Gas evaluation -IS 694-1990, Clause 16.12 6 s q mm I NO 2.3.5 SR 2022-23

HMASK23 - supplying of LED floodlight luminaire with pressure die cast aluminum housing body for optimal thermal dissipation lamp compartment comprising of anti glare clear diffuser with injection molded polycarbonate/clear glass material delivering superior light output rated life burning Hrs50000hr @ Lumen maintenance of 70% CCT550ok IP66optical and electrical compartment & impact resistance of complete luminaireIK08 power factor 0.9 with main surge protection min5kv along with over voltage overloaded short circuit miss wiring protection compatible for pole mauling with outer d a of40mm to 50mm universal voltage driver to operate wide voltage range from100v to270v 50hz 60Hz application complaisance to is 10322/IEC60598 LM 79&LM80 adherence with Rosh. u l approved MCPCB top accede street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tool LED light fixture with 150w system power consumptions. LED Efficiency 1301mw nominal CRI 75Luminaire manufacturer should have in house facility accredited by NABL CPRI & any government certified agency & Design & Development facility certified by ISO9001-2008 housing with supplier word mark name shall be Engraved Embossing on the die cast hosing body part warranty of2years against any manufacturing defect working under standard electrical condition as mentioned above should be given by LED manufacturer & Cree/NICIA/LED Floodlight 240w Item no 11.9.7 of P.No43 CSR2022-23