Directorate Of Municipal Administration Tender

code04 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates A For Mat Footings

code05 - B For Shear Retaining walls

code06 - C For Roof Slab

code07 - Supplying, fitting and placing TMT FE 550 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures VOL I for the year 2023 24. I. No. 2.11 h P.No.18

code08 - Providing 20 mm cement plaster with cement mortar 1 3 1 cement 3 coarse sand finished with a floating coat of neat cement to brick stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. Volume2. 2021 22 I. No.8.6.2 P.No.41

code09 - Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. length of mesh only be measured for payment Plaster mesh 150mm wide Volume2. 2021 22 I. No.8.16 P.No.43

code10 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 1 cement 5 coarse sand finished with a top layer 6 mm thick cement plaster with cement mortar 1 6 1 cement 6 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. Volume2. 2023 24 I. No.8.9 P.No.42

code11 - Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge. 2022 volume2 I. No. 8.63 P.No. 51

code12 - Providing and fixing SFRC frame and cover conforming to IS 12592 part I 1988 and IS 12592 part II 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1 2 4 and C.M. 1 3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances. complete.

code13 - Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034 2000 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. For 20.00 HP 135 LPM 350 m 25 STG Outlet Dia 2.00"

code14 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core sheathed of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1 3 2.5 Sqm

code15 - Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING 1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type Up to 3HP Pumps NOTE 1 DOL Direct Online Starter 2 S D Star Delta Starter etc. complete.

code16 - Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW Electric Resistance Welded SAW Submerged Arc Welded MS pipes of Outer dia Fe 410 grade conforming to IS 3589 2001 with latest amendments, including perfect linking and welding of joints to correct position, cost of the pipes, conveyance, lead, lift charges, cost of all labour and giving satisfactory hydraulic test as per IS 3589 2001 with latest amendments for test pressure and working pressure both at factory and site etc. complete as per detailed specifications inside with CM 1 1.5 lining of minimum 10mm thick for pipes upto 610mm OD and with minimum 12mm thick beyond 610mm OD and out side with minimum 25mm thick coating in CM 1 3 over 50 50mm weld mesh of 13 gauge, including loading and unloading of pipes for the following diameters and specified thickness of plate as noted below, including bailing out of water wherever necessary. Contractor will make his own arrangements for procuring water for testing. For MS Pipes of 219mm dia 6.0mm thick Note a No Negative tolerance in respect of thickness is pemissible. b Basic Cost of MS Plate is considered as Rs.71,700 per MT

code17 - Supplying installing, testing and commissioning of PN16 CI Non Return Valve confirming to IS 13039 with necessary bolts and nuts etc complete includes cost of all materials labour charges with all lead lift loading and unloading transportation etc complete. etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work 150 mm Dia CI Non Return Valve