Directorate Of Municipal Administration Tender

004 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (CSR Volume-I 2023-24, Item No 2.1.4 Pg No. 15)

005 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (CSR Volume-II 2023-24, Item No 11.34a Pg No. 86)

006 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge. (CSR Volume-II 2023-24, Item No 11.25.2 Pg No. 84)

007 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (CSR Volume-II 2023-24, Item No 8.33.3 Pg No. 47)

008 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the WORK In all kinds of soils Depth upto 3 m (CSR Volume-I 2023-24, Item No 1.14.1 Pg No. 8)

009 - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage all other appurtenaces required to complete the work. If the height of embankment construction is more than 1.50 m add 5percent per m3 for every 1.50 m height or part there of Deduct 5percent per m3 if rollers are not used and tamping is done manually Add 8% per m3 for works under foul & sullage situation (CSR Volume-I 2023-24, Item No1.8 Pg No. 7)

010 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (CSR Volume-I 2023-24, Item No2.1.4 Pg No. 15)

011 - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 600 x 300 x 150 mm size (CSR Volume-III 2023-24, Item No8.42.3 Pg No. 74)

012 - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification) (CSR Volume-III 2023-24, Item No 6.8.1 Pg No. 51)

013 - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces (CSR Volume-III 2023-24, Item No8.10 Pg No. 66)

014 - ProcurementofIngredients:Procurementoffarmyardmanure/compost,sandandred-earth(ingredients)requiredforraisingseedlingsinclusiveoftransportation,breakingofclods,sievingandheapingeachingredientseparatelyatnurserysite(Ceiling rate) (CSR Volume-8, Item No 1.2B Pg No. 1)

015 - Standard swing 2 seater Main Frame 1 NB Top bar 2 NB Rubber Chain frp 4 MM Thickness (Area 9 X4)(Area: 2.8mX1.3m, Leg support 40mm NB pipe, Top Bar 50mm NB pipe, Seat FRP bucket seat, Bearing Heavy Duty Ball Bearing, Suspension 6mm electro galvanised chain including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries and all the other appurtenances required to complete the work as per technical specifications.(Rate approved by Deputy Commissioner (Development), Kalaburagi Mahanagara Palike, Kalaburagi Circle for the year 2022-23) (Rate approved by Deputy Commissioner (Development), Kalaburagi

016 - Monkey bar Area:3.2m, Height: 2.5m, Frame: 40mm NB GI pipe, Rings: 20mm NB GI pipe) including all lead & lifts, cost of all materials of quality, labour, Usage charges of achineries and all the other appurtenances required to complete the work as per technical specifications. (Rate approved by Deputy Commissiner (Development), Kalaburagi Mahanagara Palike, Kalaburagi Circle for the year 2022-23) (Rate approved by Deputy Commissioner (Development), Kalaburagi

017 - Dual pipe side by side see saw Main(Area: 1m*1.9m, Lever: 70mm NB pipe, Column: 25mm NB pipe, Seat: moulded FRP, Bearing: Heavy duty pipe bearing) including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries and all the other appurtenances required to complete the work as per technical specifications. (Rate approved by Deputy Commissiner (Development), Kalaburagi Mahanagara Palike, Kalaburagi Circle for the year 2022-23) (Rate approved by Deputy Commissioner (Development), Kalaburagi

018 - See saw 2 seater Main Pipe 2 NB Pipe Handle" NB Pipe grouting 1 NB Pipe FRP 4MM Thick Area 6 x2(Area: 1.9m*0.6m, Lever: 70mm NB pipe, Column: 40mm NB pipe, Seat: moulded FRP, Bearing: Heavy duty pipe bearing) including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries and all the other appurtenances required to complete the work as per technical specifications. (Rate approved by Deputy Commissiner (Development), Kalaburagi Mahanagara Palike, Kalaburagi Circle for the year 2022-23) (Rate approved by Deputy Commissioner (Development), Kalaburagi

019 - Platform merry go round with cross bars (Area: 1.2m/1.5m/1.8m dia, Height: 1m, Platform: non skid aluminum plate, Outer ring: 35mm NB pipe, Hand rail: 25mm NB pipe, Bearing: Triple Heavy Duty Bearing permanently lubricated and with water sealant) including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries and all the other appurtenances required to complete the work as per technical specifications. (Rate approved by Deputy Commissiner (Development), Kalaburagi Mahanagara Palike, Kalaburagi Circle for the year 2022-23) (Rate approved by Deputy Commissioner (Development), Kalabura

020 - Spring rider duck Spring Heavy Duty(20MM) Handle 3/4 N B Pipe, Grouting Pipe 2 1/2 N B, 6MM Plate 8 - 1 no, mm - 11 X 8 = 1 no (Area = 2 Feet X 2 Feet) including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries and all the other appurtenances required to complete the work as per technical specifications. (Rate approved by Deputy Commissiner (Development), Kalaburagi Mahanagara Palike, Kalaburagi Circle for the year 2022-23)

021 - Two way slide Gl pipe : 12 gauge FRP Slide 3 to 4MM Thickness, ladder; Gi sheet steps including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries and all the other appurtenances required to complete the work as per technical specifications. (Rate approved by Deputy Commissiner (Development), Kalaburagi Mahanagara Palike, Kalaburagi Circle for the year 2022-23) (Rate approved by Deputy Commissioner (Development), Kalaburagi

022 - GYM EQUIPMENT ( K00CTED Supply and Fixing of Arm and Pedal Bike: All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Horizontal Structural post of length 1.10 m supporting Upright structural posts of height 1.23 m and Dia 60mm is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Pedals of size 108 mm & Bars of size 197 mm. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery: 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. The rates are inclusive of transportation charges and installation. EQUIPMENT DIMENSIONS: 1.43 m x 0.65 m x 1.23 m, User capacity: 1 Person (Rate approved by Deputy Commissioner (Development), Kalaburagi

023 - Supply and Fixing of Health Walker: All products must tested and certified to meet EN 16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Foot Rest of size 361 mm x 161 mm are attached to the Standing Bars 957mm x 60 mm fabricated from 60 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably. Bearings: Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery: 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. The rates are inclusive of transportation charges and installation.EQUIPMENT DIMENSIONS: 1.18 m x 0.553 m x 1.25 m User capacity: 1 Person. (Rate approved by Deputy Commissioner (Development), Kalaburagi

024 - supply and Fixing of Elliptical Cross Trainer: All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Foot rest of size 320 mm x 132 mm are attached to the Standing Bars 998 mm x 40 mm fabricated from 40 O.D. galvanized steel pipes. Lower part of Support Handrails of size 0.8 m high and Dia 47 mm and Upper part of Support Handrails of size 0.51 m high and Dia 32 mm fabricated from 47 mm O.D. and 32 mm O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery: 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. The rates are inclusive of transportation charges and installation. EQUIPMENT DIMENSIONS: 1.02 m x 0.53 m x 1.52 m, User capacity: 1 Person(Rate approved by Deputy Commissioner (Development), Kalaburagi

025 - RCC bench 5'' (Rate approved by Deputy Commissioner (Development), Kalaburagi