Directorate Of Municipal Administration Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 25,000Document Cost
Refer DocumentsTender Fee
₹ 500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DMA/2024-25/BD/WORK_INDENT30505Tender No
DMA/2024-25/BD/WORK_INDENT30505Tender Authority
Directorate Of Municipal Administration ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
004 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) (Page No.09. Iitem no.5.1.1 of Vol-2-CSR-KPWD 2024-2025)
9.637
5779
55695.40321
... More
005 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.1 of Vol-1-CSR-KPWD 2024-2025)
1.29
6993
9021.8085
... More
006 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page No.16. Iitem no.2.5.1 of Vol-1-CSR-KPWD 2024-2025)
9.09
10243
93112.0515
... More
007 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and
technical specification Buildings (Page No.18. Iitem no.2.11a of Vol-1-CSR-KPWD 2024-2025)
0.93
92140
85690.8603
... More
008 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(Page No.14. Iitem no.6.8 of Vol-2-CSR-KPWD 2024-2025)
13.6
8208
111629.752
... More
009 - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off orners wherever required smooth rendering, providing and removing caffolding, including cost of materials, labour, curing complete as per pecifications and as per directions of Engineer-in-charge(In side Plastering) (Page No.41. Iitem no.8.4.1 of Vol-2-CSR-KPWD 2024-2025)
170.47
332
56713.6643
... More
010 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Page No.50. Iitem no.8.51 of Vol-2- -KPWD 2023-2024)
170.47
103
17558.41
... More
011 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.48. Iitem no.8.39 of Vol-2-CSR-KPWD 2024-2025)
170.47
130
22299.1807
... More
012 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Page No.42. Iitem no.8.2.1 of Vol-2-CSR-KPWD 2024-2025)
82.78
287
23788.4886
... More
013 - Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.46. Iitem no.8.29 of Vol-2- -KPWD2023-2024)
82.78
291
24129.5422
... More
014 - Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile
5.78
1283
7417.9364
... More
015 - Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm(Page No.60. Iitem no.9.12.2 of Vol-2-CSR-KPWD 2024-2025)
66.93
1179
78933.8955
... More
016 - Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.(Page No.65. Iitem no.9.38 of Vol-2-CSR-KPWD 2024-2025)
20.53
1433
29435.0928
... More
017 - Providing Mathi / Nandi wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications.(Page No.99. Iitem no.12.3 of Vol-2-CSR-KPWD 2024-2025)
0.178
126070
22440.63266
... More
018 - Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures).(Page No.100. Iitem no.12.17 of Vol-2-CSR-KPWD 2024-2025)
2.14
7297
15616.757
... More
019 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick Both side teak(Page No.106. Iitem no.12.57.1 of Vol-2-CSR-KPWD 2024-2025)
3.12
4164
12992.5848
... More
020 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (Page No.104. Iitem no.12.51 of Vol-2-CSR-KPWD 2024-2025)
3
1046
3139.44
... More
021 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.(Page No.85. Iitem no.11.34A of Vol-2-CSR-KPWD 2024-2025)
395.01
173
68352.5304
... More
022 - Providing & fixing of 3 track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made)(Page No.110. Iitem no.12.90 of Vol-2KPWD 2023-2024)
7.87
6421
50533.4274
... More
023 - Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.46. Iitem no.8.33.2 of Vol-2-CSR-KPWD 2024-2025)
9.79
142
1391.5506
... More
024 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes (Page No.125. Iitem no.13.50.2 of Vol-2-CSR-KPWD 2024-2025)
36
177
6377.76
... More
025 - Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay (non modular) bricks of class designation 3.5(Page No.125. Iitem no.13.51 of Vol-2-CSR-KPWD 2024-2025)
1
1757
1757.18
... More
026 - Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :100x70x4 mm (ordinary type)(Page No.107. Iitem no.12.75.4 of Vol-2- -KPWD 2023-2024)
10
144
1442
... More
027 - Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm(Page No.107. Iitem no.12.76.2 of Vol-2- -KPWD2023-2024)
7
360
2523.5
... More
028 - Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(Page No.105. Iitem no.12.61 of Vol-2- -KPWD 2023-2024)
1
1019
1019.7
... More
029 - Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(Page No.105. Iitem no.12.60 of Vol-2- -KPWD 2023-2024)
1
1083
1083.56
... More
030 - Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete(Page No.105. Iitem no.12.62 of Vol-2- -KPWD2023-2024)
4
244
976.44
... More
031 - Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(Page No.107. Iitem no.12.58 of Vol-2-CSR-KPWD 2023-2024)
2
123
247.2
... More
032 - Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :(PWD SR 2023-2024, V-II, Pg No-131, It No-14.3.1)
1
6156
6156.31
... More
033 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (PWD SR 2023-2024, V-II, Pg No-132, It No-14.7.1)
2
3174
6348.92
... More
034 - Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm(PWD SR 2023-2024, V-II, Pg No-136, It No-14.32.2)
2
1048
2097.08
... More
035 - Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g. (PWD SR 2023-2024, V-II, Pg No-137, It No-14.40.1)
2
492
984.68
... More
036 - Providing and fixing brass bib cock of approved quality 15 mm nominal bore: (PWD SR2023-2024, V-II, Pg No-117, It No-13.2.1)
4
294
1178.32
... More
037 - Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g (PWD SR 2023-2024, V-II, Pg No-121, It No-13.24)
4
170
683.92
... More
038 - Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete (PWD SR 2023-2024, V-II, Pg No-127, It No-13.58)
3
356
1069.14
... More
039 - Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60(Page No.25. Iitem no.7.32.4 of Vol-2-CSR-KPWD 2024-2025)
49.02
1360
66698.0826
... More
040 - Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823marked, including priming coat on unexposed arrangement and screws etc. complete :12 mm thick (Page No.70. Iitem no.10.10.1 of Vol-2-CSR-KPWD 2024-2025)
131.715
1142
150454.09305
... More
041 - Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture(Page No.70. Iitem no.10.11 of Vol-2-CSR-KPWD 2024-2025)
131.715
1524
200786.346
... More
042 - Providing & fixing Vertical Blinds of reputed make of shape 100mm regular fabric with powder coated aluminium channel, telting with PVC Chain system with all necessary fittings and fixtures as per direction of Engineer in charge (Page No.219. Iitem no.22.23 of Vol-2-CSR-KPWD 2024-2025)
7.19
875
6294.845
... More
043 - Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in charge(Page No.219. Iitem no.22.16 of Vol-2-CSR-KPWD 2024-2025)
1
38625
38625
... More
044 - Providing and fixing Single seater Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in charge(Page No.219. Iitem no.22.18 of Vol-2-CSR-KPWD 2024-2025)
1
17510
17510
... More
045 - Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate (Page No.219. Iitem no.22.20 of Vol-2-CSR-KPWD 2024-2025)
1
7725
7725
... More
046 - Providing & supplying hands free squeeze Micro fibre Flat spin Mop with 360 degree flexible head and super absorbent fibre of good quality as per direction of Engineer in charge.(Page No.220. Iitem no.22.27 of Vol-2-CSR-KPWD 2024-2025)
5
1442
7210
... More
047 - Meeting table -wooden Providing and fixing meeting table consisting of 25 mm thick PLPB table topedge bounded, 25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Modesty, Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge(Page No.335. Iitem no.39.22 of CSR-PWD 2018-2019)
1
21600
21600
... More
048 - Meeting table -wooden Providing and fixing meeting table consisting of 25 mm thick PLPB table topedge bounded, 25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Modesty, Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge(Page No.335. Iitem no.39.21.1 of CSR-PWD 2018-2019)
1
13014
13014
... More
049 - Supplyingof .. TRInvertor type splitAir conditioners suitable for operation onA/Csupply singlephase50Hz230Vwithhermetically sealedinvertercompressor withaircooledcondenser, latestR410A/ R-32refrigerant fanmotor,start&runcapacitors, relay&overload protector internal unit, with one indoor&one outdoor unit The condenser unitwillbeplacedoutsidetheroomavoidnoiseincluding standardlength of suitable size copper tubing coveredwith nitrile rubber insulation tube. suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit.(Page No.31. Iitem no.6.8.5 of Vol-6-CSR-KPWD 2024-2025)
2
60863
121726.8
... More
050 - Installation charges for 1 to 2Ton capacity window typeAir Conditionerwith50x75mmthickteakwoodframeof suitablesize and allied works complete(Page No.32. Iitem no.6.11 of Vol-6-CSR-KPWD 2024-2025)
2
2895
5790.96
... More
051 - Supplying heavy gauge PVC Conduit Pipe .... dia .......mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary 19/20 mm dia 2 mm thick( -KPWD - Elec Vol-VI, 2023-2024: Page No.02, Item No. 1.3.1)
32
70
2241.28
... More
052 - Supplying heavy gauge PVC Conduit Pipe 25 mm dia 2mm mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary.( -KPWD - Elec Vol-VI, 2023-2024: Page No.02, Item No. 1.3.2)
32
81
2603.84
... More
053 - Concealed Conduit System Supplying heavy gauge PVC conduit pipe 32 mm dia.2.5 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., andrunning before concreting the slab. The conduit should be tiedto the reinforcement rods by using binding wires and unusedways of junction boxes and pipe ends should be coveredusing PVC end enclosures, run with 18SWG GI fish wire wherever necessary( -KPWD - Elec Vol-VI, 2023-2024: Page No.02, Item No. 1.2.3)
18
106
1909.62
... More
054 - Supplying heavy gauge PVC Conduit Pipe 32 dia 2.5 mm thick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduit wherever necessary( -KPWD - Elec Vol-VI,2023-2024: Page No.02, Item No. 1.3.3)
32
101
3263.04
... More
055 - Supplying 250 A 4 x 30 x 10 mm Aluminium Strips rated 3 phase with neutral bus bar usingrequired capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted onphenolic/FRP/DMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete - 250 A 4 x 30 x 10 mm Aluminium Strips( -KPWD - Elec Vol-VI, 2023-2024: Page No.20, Item No. 5.40.2)
3
3538
10614.15
... More
056 - WIRES & CABLES
Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Short point upto 3m from tapping point to out let via switch( -KPWD - Elec Vol-VI, 2023-2024: Page No.05, Item No. 2.1.1)
20
293
5871
... More
057 - Supplying 6A flush type socket and 6Amps flush type SP switch either surface / flush mounting in existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. as per IS 1293 and IS 3654 A) 6 Amps 3/5 way( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.1.2)
10
151
1514.1
... More
058 - Supplying and mounting 2 Nos of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as required. IS 3854 ( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.2)
10
175
1751
... More
059 - Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 2.5 mm2 ( -KPWD - Elec Vol-VI,2023-2024: Page No.05, Item No. 2.3.3)
270
43
11680.2
... More
060 - Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 4.00 mm2 ( -KPWD - Elec Vol-VI, 2023-2024: Page No.05, Item No. 2.3.4)
60
64
3893.4
... More
061 - Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 10.00 mm2 ( -KPWD - Elec Vol-VI, 2023-2024: Page No.05, Item No. 2.3.6)
30
172
5160.3
... More
062 - Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc, for operation on 230 V, 50 cycles.Single phase AC supply conforming to ISS-374- 1979 and withdouble ball bearing system.- 48" Sweep (1200 mm) Regular model ( -KPWD - Elec Vol-VI, 2023-2024: Page No.30, Item No. 6.3.1)
3
3073
9220.56
... More
063 - Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to theexistingboard together with supplying and fixing 5 A. ceiling rose,necessary length of 23 / 0.0076 inch PVC insulated twintwisted copper wire and wiring( -KPWD - Elec Vol-VI, 2023-2024: Page No.57, Item No. 13.10)
3
176
528.39
... More
064 - Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board.- 6A Lamp Holder( -KPWD - Elec Vol-VI, 2023-2024: Page No.10, Item No. 3.14.6)
4
73
292.52
... More
065 - pplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board.- 6A Bakelite Ceiling Rose( -KPWD - Elec Vol-VI, 2023-2024: Page No.06, Item No. 3.14.5)
4
80
321.36
... More
066 - Fixing one exhaust fan after making a suitable notch in the
wall and finishing with cement mortar and colouring to matchthe existing wall or brackets, with bolts and nuts and a 5 A,ceiling rose with sufficient length of 23 / 0.0076 inch PVCinsulated twin core wire of approved make with wire meshand wooden frame.( -KPWD - Elec Vol-VI, 2022-23: Page No.57, Item No. 13.13)
1
728
728.21
... More
067 - Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 Amps( -KPWD - Elec Vol-VI,2023-2024: Page No.14, Item No. 5.7.3)
4
413
1652.12
... More
068 - Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 100 Amps( -KPWD - Elec Vol-VI, 2023-2024: Page No.14, Item No. 5.7.4)
4
711
2846.92
... More
069 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps DP( -KPWD - Elec Vol-VI, 2023-2024: Page No.17, Item No. 5.18.4)
4
761
3044.68
... More
070 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps DP( -KPWD - Elec Vol-VI, 2023-2024: Page No.17, Item No. 5.18.6)
4
1135
4540.24
... More
071 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps TPN( -KPWD - Elec Vol-VI, 2023-2024: Page No.17, Item No. 5.18.7)
4
1768
7074.04
... More
072 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps TPN( -KPWD - Elec Vol-VI, 2023-2024: Page No.18, Item No. 5.18.9)
4
3180
12722.56
... More
073 - Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coatedpainting Made out of 14 SWG MS enclosure.II - Double Door-12 Way SP & N( -KPWD - Elec Vol-VI, 2023-2024: Page No.18, Item No. 5.19.9)
4
2398
9595.48
... More
074 - Supplying, fixing and wiring Residual current circuit breaker (RCCB)
240/450V upto 300mA sensitivity on existing wood/ panel board.-16A-25A 2 pole (KPWD - Elec Vol-VI, 2023-2024: Page No.18, Item No. 5.20.1)
1
4405
4405.31
... More
075 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall1-3 Way( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.4.2)
3
163
491.31
... More
076 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box1 to 3 Module( -KPWD - Elec Vol-VI, 2023-2024: Page No.08, Item No. 3.5.2)
3
165
497.49
... More
077 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch ( -KPWD - Elec Vol-VI, 2023-2024: Page No.09, Item No. 3.6.1)
6
105
630.36
... More
078 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch( -KPWD - Elec Vol-VI, 2023-2024: Page No.09, Item No. 3.6.2)
6
170
1025.88
... More
079 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket( -KPWD - Elec Vol-VI,2023-2024 Page No.09, Item No. 3.6.10)
6
243
1458.48
... More
080 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch( -KPWD - Elec Vol-VI, 2023-2024: Page No.09, Item No. 3.6.9)
6
335
2014.68
... More
081 - Supplying of .feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70prc lumen maintenance with CRI 80. PowerInput: 220-240V at 5060Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 2' - 9/10 W( KPWD Elec Vol-VI, 2023-2024: Page No.43, Item No. 11.3.1)
6
567
3405.18
... More
082 - Supply of roundsquare recesssurface mounted rolling
type LED Down light withW GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70 prc lumen maintenance with CRI 80 Power Input 220-240V at 50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10 12W( KPWD Elec Vol-VI,2023-2024: Page No.44, Item No. 11.5.2)
16
911
14584.8
... More
083 - Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board.-6A SP Switch-(KPWD - Elect,2023-2024: Page No.10, Item No. 3.14.1)
4
56
226.6
... More
084 - Supplying, fixingandwiringElectronicTrivectorMeter (ETV) 5 to 20A single phase Class-1 Accuracy withTemper Proof Energy Meter.
1
1421
1421.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements