Directorate Of Municipal Administration Tender

code04 - Providing, laying, spreading and compacting graded stone aggregates to wetmix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density [PWD SR 2023-24 Vol:2 P.NO.65 I.No:9.40]

code05 - Precast Cement Concrete Interlocking Blocks Providing and laying 60mm thick factory made precast M-30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in [PWD SR 2023-24 Vol:3 P.NO.51 I.No:6.8.1]

code06 - Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. [PWD SR 2023-24 Vol:2 P.NO.48 I.No:8.36.2]

code07 - Providing Size Stone Masonry with Hard Stone in Foundation and Plinth with cement mortar 1:6 [PWD SR 2023-24 Vol:2 P.NO.9 I.No:5.4]

code08 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates [PWD SR 2023-24 Vol:1 P.NO.16 I.No:2.3.1]

code09 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures. [PWD SR 2023-24 Vol:1 P.NO.18 I.No: 2.11(h)]

code10 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge.[PWD SR 2023-24 Vol:2 P.NO.84 I.No:11.25.2]

code11 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. [PWD SR 2023-24 Vol:2 P.NO.47 I.No:8.33.3]

code12 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life)[PWD SR 2023-24 Vol:2 P.NO.46 I.No:8.33.1]

code13 - Supply and fixing of Tai Chi Spinners. Metal: All tubular steel of 2.5mm thickness are galvanized and zinc dipped. Joints are Robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG Process. All welds are dressed off removing all sharp edges and burrs. Zinc Primer paint is applied at all the welding points prior to finishing. All metal parts are powder coated using AKZO nobel-Great Wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine that uses a 5% NaCI solution in accordance to ISO7227 to speed up corrosion for 3000 Hrs. Rubber: High quality grip rubber is used for the handles. Bearings: Maintenance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN 16630 and the maintenance guide. Safety: All products must be tested and certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS Mark EN16630 Certificates must be in the name of tendering party and not any 3rd Party. All products must clearly display the GS Mark as has been issued in the EN 16630 safety certificates. Size L x W x H 1120 x 1150 x 1620mm, Weight: 39KG, Safety Area: 3520 x 3550mm, Capacity 3 Persons.

code14 - Supply & Fixing of HD Waist Twister. Metal: All tubular steel of 2.5MM thickness are galvanized and zinc dipped. Joints are Robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG Process. All welds are dressed off removing all sharp edges and burrs. Zinc Primer paint is applied at all the welding points prior to finishing. All metal parts are powder coated using AKZO nobel-Great Wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray machine that uses a 5% NaCI solution in accordance to ISO7227 to speed up corrosion for 3000 Hrs. Rubber: High quality grip rubber is used for the handles. Bearings: Maintenance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN 16630 and the maintenance guide. Safety: All products must be tested and certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS Mark EN16630 Certificates must be in the name of tendering party and not any 3rd Party. All products must clearly display the GS Mark as has been issued in the EN 16630 safety certificates. Size LxWxH: 1460 x 1310 x 1150 mm Weight: 39.1KG Safety Area: 4360 x 4510 mm, Capacity 3 Persons Inclusive of all Taxes and Freight Charges. "

code15 - Supply and fixing of Bicycle (Out door Fitness equipment): Metal:All tubular steel of 2.5mm1hicknos are galvanized and zinc dipped. Joints are Robotic welded. All welded joints are sca lloped as necessary: and welded to an approved MIG process. All welds are dressed off removing all sharp edges and burrs. Zinc Primer Paint is applied at all the welding points prior to finishing . All metal parts are powder coated using AKZO Nobel-Great Wall powder to the thickness of 80-120 microns. All metal parts are tested in our sa lt spray machine that uses a 5% NaCl solution in accordance to IS07227 to speed up corrosion for 3000 hrs. Rubber: High quality grip rubber is used for the handles 13 Bearings: Maintenance-free ball bearings.Scope of delivery: 1completely pre-assembled equipment modules.Maintenance: Maintain according to EN 16630 andthe maintenance guide. Safety: All products must be tested and certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC, or SGS only .The GS Mark- EN16630 Certificates must be in the name of tendering party and not any 3rd party.All products must clearly display the GS ma rk as has been issued in the EN16630 safety certificates.Size LxWxH: 1000x498x1290 mm Weight: 51.5 KG Safety Area:3400x34980 mm, Capacity 1 Person Inclusive of all Taxes and Freight Charges.

code16 - Standing Marry Go round.All round and Rectangular Pipes are GI or CR ISI Make Guage 14 Gauge 2 Coating are red Oxide and final paints of industrial paint nut bolt GI Bearing Heavy (Branded) FRP Thickness 4-5mm Swing assembly 6mm Chain with Rubber Coating inclusive of all Taxes and Freight Charges.[Approved Rates]