Directorate Of Municipal Administration Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 2,52,000Document Cost
Refer DocumentsTender Fee
₹ 5,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DMA/2024-25/EL/WORK_INDENT31675Tender No
DMA/2024-25/EL/WORK_INDENT31675Tender Authority
Directorate Of Municipal Administration ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
code19 - Fabrication, Supplying, Erection, Testing and Commissioning of . ms long Polygon high mast with Single/ Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thickness as per BSEN 10025 grades 355 JO/ASTM A572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/s as per IS 875 part 3(as per GA Drawing). Base plate as per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hotdip as per BSEN ISO 1461/ASTM A123 with an average 70 microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint The mast shall have 2 Way head frame with die cast LM-6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5 mm dia, stainless steel wire rope of AISI 304grade 7/19-core, (Factor of Safety as per TR no-7). 2.5 mm2 EPR insulated PCP sheathed trailing power cable housedinside the bottom shaft of mast with door having locking arrangement The mast shall have manual/power tool (Suitable reversible geared motor operating on 230/415V, 50Hz, shall be provide above 15 Mtr mast) The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS 1239. The mast shall be erected on existing RCC footing. The mast shall be supplied with 3 mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin l A fitting with wiring complete. (excluding foundation) as per technical data12 m/12.5 m - Top 100 mm and Bottom 310 mm dia
4
137550
550200
code20 - Supplying and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1500 mm Standard 40/50 mm dia
32
2205
70560
code21 - upply of LED streetlight luminaire with pressure die-cast aluminum housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with injection-molded polycarbonate material, delivering superior light output Rated life Burning Hrs. 50000 hr Lumen Maintenance of 70 maximum light intensity should be between 60 degrees and 70 degrees. CCT 5500K, IP66 optical and electrical compartment and impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, surge protection (min 5KV), along with overvoltage overload and short circuitormiss-wiring protection. Compatible for pole mounting with outer diameter of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50or60Hz application. Compliance to IS 10322orIEC 60598, LM 79 and LM 80 Adherence with RoHS. UL-approved MCPCB. Top-access street light with single screw to ensure ease of maintenance at the sight site location with minimal minimal tools. LED Light fixture with W system System Power consumption. LED Efficiency: 1301 morw, nominal CRI 75. A luminaire manufacturer should have an in-house facility accredited by NABLorCPRI and any government-certified agency a design and development facility certified by ISO 9001:2008. Housings with a supplier's wordmark or name shall be engraved or embossed on the die-cast housing or body part. Warranty of 2 years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by the LED manufacturer, and Cree, Nichia, Lum LED, or Osram make LED sources. LED Streetlight 70W
60
6291
377496
code22 - Supply of LED floodlight luminaire with pressure die cast aluminum housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with injection-molded molded polycarbonate or clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70, CCT greater tahn 5500K, IP 66 optical and electrical compartment, and impact resistance of complete luminaire greater tahn IK08. Power Factor greater tahn0.9 with mains, Surge Protection: Min 5KV along with overvoltage or overload, short circuitor miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50or60Hz application. Compliance to IS 10322or IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with . W System Power consumption. LED Efficiencygreater tahn 1301morw, nominal CRI greater tahn75. Luminaire manufacturer should have in- house facility accredited by NABL or CPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008. Housing with supplier word mark or name shall be Engraved or Embossing on the die cast housing or Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree or Nichiaor Lumi leds or Osram
make LED source. LED Floodlight 120W
32
11294
361435.2
code23 - GI pipe 100 mm (nominal bore), medium class (including accessories)
50
1417
70875
code24 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonateorclear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen
Maintenance of 70, CCT greater tahn 5500K, IP 66 optical and electrical compartment and impact resistance of complete luminaire greater tahn IK08. Power Factor greater tahn0.9 with mains, Surge Protection- Min 5KV along with Over voltageor Overload, short circuitor miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50or60Hz application. Compliance to IS 10322or IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with . W System Power consumption. LED Efficiencygreater tahn 1301morw, nominal CRI greater tahn75. Luminaire manufacturer should have in- house facility accredited by NABL or CPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008. Housing with supplier word mark or name shall be Engraved or Embossing on the die cast housing or Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeorNichiaor LumiledsorOsram
make LED Source . LED Floodlight 70W
60
7106
426384
code25 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130-1984 and(Virgin)PVCinsulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 2C x 1.5 mm2
500
55
27825
code26 - Fixing halogen/metal halide/SVL/IL/LED floodlight fitting over existing pole/wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
152
170
25855.2
code01 - Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .......m Pole in single section and single joint welded as per IS 9595 IS10178AWS having dimensions bottom ..... mm , top.... mm with 3 mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended.7 m - Top 70 mm and Bottom 130 mm dia
60
14175
850500
code02 - Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable form out door luminaries and mounted on Octagonal pole using necessarym bolts, nuts etc., complete.Single Arm Bracket with 1000 mm Standard 40/50 mm dia
60
1785
107100
code03 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'Typecurve, indicatorON/OFF, energycross-3 with Short circuit breaking capacity of10K and complete wiring as required confirming to IEC60898. 6-32 A SP
60
435
26145
code04 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)
6
148934
893604.6
code05 - Compression type Aluminium Tubular in Line Connector for Aluminum Conductor16 Sqmm
250
4
1000
code06 - Optical Fibre Cable (OFC) and its Accessories HDPE/PLB Pipe 40/33 mm
5.8
65452
379626.24
code07 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm
6
21930
131581.8
code08 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, 50, 4 Core, (17 GI Strips - 4 x 0.8 mm)
2
217553
435107.4
code09 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm
2
32695
65391.9
code10 - Compression type Aluminium Tubular in Line Connector for Aluminum Conductor 50 Sqmm
30
7
220.5
code11 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 150 Sqmm, 3.5 Core, (25 GI Strips - 4 x 0.8 mm)
2
582387
1164775.5
code12 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable
2
32695
65391.9
code13 - Compression type Aluminium Tubular in Line Connector for Aluminum Conductor 150 Sqmm
20
27
546
code14 - Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft r9ock without blasting upto 1.5 m depth(L=11000 B=.75 D=.75)
5625
313
1765968.75
code15 - Refilling available earth around trenches/pipe lines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications
5500
168
924000
code16 - Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.14 SWG
1250000
-
650000
code17 - Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 400 A 4 x 50 x 10 mm Aluminium Strips
10
4667
46672.5
code18 - Supplying.........Arated3phasewithneutralbusbarusingrequiredcapacityelectrolyticaluminiumstripscoveredwithheatshrinkablecolouredPVCsleeve,mountedonphenolic/FRP/DMCinsulatorwhicharemountedonpowdercoated40x6mmM.S.flatframeworkinexistingpanelboard.ThebusbarshallhavesuitableholesforterminationofincomingandoutgoingcablesasperISspecification with necessary bolts, nuts and washers etc., complete 250 A 4 x 30 x 10 mm Aluminium Strips
10
2588
25882.5
code19 - Supplying ......... A rated 3phase with neutral bus bar using
required capacity electrolytic aluminium strips covered with heatshrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 100 A 4 x 30 x 6 mm Aluminium Strips
20
2588
51765
code20 - Supplying and fixing angle iron frame work fabricated out of M.S.angle iron and M.S.Flat......with bolts,washer setc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 100 x 50 x 6 mm C channel
30
793
23814
code21 - Supplying and fixing angle iron frame work fabricated out of M.S.angleiron..and M.S.Flat......with bolts,washer setc.,and painted with 2 coats of red oxide and then two coats of approved paint 40 x 40 x 6 mm
20
320
6405
code22 - Supplying 4mm thick plastic sheet with necessary nitches for fixings witches,regulator setc,and fixing on existing wooden or metal box using N.F. screws.
250000
-
107500
code23 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 .(Icu=100 lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism 250 A 25 kA
4
22460
89842.2
code24 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over theexisting wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection ofOverload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 .(Icu=100 lcs). In 4P MCCB, all Poles should have protection forShort-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism 320-400 A 50 kA
4
31616
126466.2
code25 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over theexisting wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100 lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open).Multi-pole breakers shall be designed to break all the polessimultaneously and they shall have a single mechanism100 A 25 kA FOUR Pole
15
8911
133670.25
code26 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Typecurve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 A TPN
25
3242
81060
code27 - SupplyingofmultifunctiondigitalmeterwiththreelinebacklightLCDtypedisplayforvoltage,Current,frequency,Power,powerfactor,kVA,kWH,kVARsuitablefor3phase,4wireLTnetworkwithIP54degreeofprotectionandcompletelywiredasrequiredwithcommunication Port and Class 0.5s accuracy
15
9780
146711.25
code28 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.
50
540
27037.5
code29 - Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS2834.3phase, 400/440Vgrade,for power factor improvement of rotating machineries like induction motor.
500
504
252000
code30 - Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive displays with large, three phase LED display, Long term memory for settings, protection for over voltage, power factor correction fault and no voltage, to connect/ disconnect banks, with automatic recognition or with standard programs
3
22722
68166
code31 - Supply and fixing of 3-pole Capacitor switching contactor with NO/NC contacts and inbuilt damping resistor to protect the contactor and capacitor from highest inrush current , fixed on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC 690V Rating operational voltage, 50HZ frequency and as per IS 60947-4-1.-1.50KVAR
12
15820
189844.2
code32 - Supply and fixing of Multifunctional three phase monitoring relays suitable to monitor three phase mains. It monitors all phase parameters such as over/undervoltage, phase unbalance, phase failure as well as an interrupted neutral. The corresponding threshold values are adjustable. Phase sequence monitoring as well as an ON or OFF tripping delay are selectable. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). voltage rating 180V - 280V AC
3
18128
54384.75
code33 - Supplying, fixing and wiring 50/5to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
36
590
21243.6
code34 - Supplying,fixing and wiring1000/5Ato1600/5A15VABurdenclass 1 Current Transformer
12
882
10584
code35 - Supplying, installing, testing and commissioning of Diesel Generator
set with following specifications. Power rating as per standard
reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS
1002/ISO 3046 Generator set specifications. 100 KVA/ 80 kw
2
946003
1892007.6
code36 - Supplying of on load change overs witches 4poles, AC-23A Duty, 415V, 50Hz,AC Supply.With all accessories.(SM Enclosure Sheet Metal Execution)250 A
2
22968
45937.5
code37 - Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 500 kVA, Aluminium Wdg, Star 2 (5 Star) CABLE ENTRY TYPE
1
959467
959467.95
code38 - LT Distribution Box for 100/250 kVA DTC with MCCB's (SMC)
1
25649
25649.4
code39 - LT Protection Kit(Dwg no. BESCOM/GM/QS&S/10 Dtd 24.11.2018)
1
2124
2124.15
code40 - 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 95 Sqmm, (54 GI Wires - 2.5 mm Dia)
0.15
934149
140122.395
code41 - 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 no of Meters for 3 Phase 4 Wire Metering without Load Break Switch (HT Metering Box Fabricated out of 3 mm MS Sheet duly epoxy powder coated) as per revised Specification(Dwg no. BESCOM/GM/QS&S/-- Dtd 24.11.2018)
1
255645
255645.6
code42 - Load Break Switch
1
76900
76900.95
code43 - Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm
4
4270
17081.4
code44 - Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule 3x95 Sqmm
4
7676
30706.2
code45 - LT 3 Phase, 4 Wire, CT Operated DLMS Complaint ETV Meter-5A, class 0.5s Accuracy (Used for 25 HP/18KW & Above Installations, DTC Metering)
1
3565
3565.8
code46 - For Distribution Transformer Centre (DTC) MS Box for housing the ETV Meter 3 Phase 4 Wire 5 Amps, with associated LT CT 0.5 Accuracy Class, ring type, with wiring Clamps, B&N and all other accessories required. (EXCLUDING ETV METER) With CT Ratio 800/5 for 500 kVA DTC
1
6416
6416.55
code47 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff HT Cable 3x95 to 150 Sqmm
0.14
64388
9014.334
code48 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 240 Sqmm, 3.5 Core, (30 GI Strips - 4 x 0.8 mm)
0.2
905799
181159.86
code49 - Compression type Aluminium Tubular in Line Connector for Aluminum Conductor240 Sqmm
20
55
1113
code50 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 120 to 240 Sqmm
0.14
33891
4744.866
code51 - GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg Each Good Quality Salt for grounding purposes packed in 50 Kg gunny bag
90
1815
163390.5
code52 - Digging of Pit for providing GI Pipe type Earthing
90
796
71725.5
code53 - Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
3.468
6948
24098.7852
code54 - Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
10.4
253
2631.72
code55 - 11.58 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineerin- charge. (Made of G.I. wire of dia 4 mm)
18
843
15176.7
code56 - Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge.
250
118
29662.5
code57 - GOS as per IS-9921, IS-1977 11 kV, 400 Amps Double Break GOS(Dwg no.BESCOM/GM/QS&S/22 Dtd 24.11.2018)
2
22323
44646
code58 - Fixing of GOS including wiring (11 kV Double Break 400 Amps)
2
1274
2549.4
code59 - Erection of 300 - 500 kVA Transformer
1
3239
3239.25
code60 - Erection of HT metering Cubicle on Platform.
1
1936
1936.2
code61 - Fixing Metering Box for housing the ETV Meter 3 Phase 4 Wire along with CT's, Meter & wiring for DTC 300/500 kVA TC
1
2043
2043.3
code62 - Fixing of 11 kV GOS Single Break or Double Break including wiring on old existing Structure (were only fixing of GOS work is involved)
1
2533
2533.65
code63 - Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring
3
248
746.55
code64 - 11 kV, DOLO Cutout Conventional to Erstwhile KEB Specification 3 noS
1
6168
6168.75
code65 - DP Set (2 Pole Strucrure Kit) as per IS-1977 For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9 Mtr Long, 300Kg WL - GI
1
9306
9306.15
code66 - 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR(Dwg no. BESCOM/GM/QS&S/26 Dtd 24.10.2007)
3
966
2898
code67 - Fixing of 3 nos Lightning Arrestor including wiring 3 noS
1
124
124.95
code68 - Insulation Tester (Megger) 500 V rating
2
12776
25552.8
code69 - Multimeter electronic type
2
8390
16781.1
code70 - 1000 A AC Clamp Meter (DCM 39 A)
2
12776
25552.8
code71 - Arc welding machine 9/10 Kva
2
29285
58571.1
code72 - Protective Goggle
4
945
3780
code73 - Rubber shoes knee height
8
2244
17959.2
code74 - Hand drilling machine
2
22441
44883.3
code75 - Safety helmet with rachet
8
289
2318.4
code76 - Rain coat with duck back
5
1180
5901
code77 - Gum Boots
6
2738
16430.4
code78 - Hydraulic Bolt Cutter / Wire Cutter upto Drake ACSR conductor with bits for cuttings
1
50687
50687.7
code79 - Allen keys
3
501
1505.7
code80 - Hammer 8 Lbs
2
521
1043.7
code81 - Hammer 2 Lbs
2
261
522.9
code82 - Rechargeable 5 W LED Hand Torch
4
1342
5371.8
code83 - Pipe wrench : 24 inches size
2
1312
2625
code84 - Ring spanners : 12 nos. per set
2
924
1848
code85 - Tube Spanners : 12 nos. per set
2
1506
3013.5
code86 - Rubber hand gloves 15 kV tested
2
307
615.3
code87 - Hack saw frames +B185
2
381
762.3
code88 - Insulated cutting pliers : 12 inches size
2
412
825.3
code89 - Box spanners : 12 nos. per set
2
4690
9380.7
code90 - ABC Powder Type Fire Extinguisher 9 Litre with necessary mounting stand)
5
7775
38876.25
code91 - ABC Powder Type Fire Extinguisher 6Litre with necessary mounting stand)
5
5221
26108.25
code92 - Sand Type G.I. Buckets 9 Litre
6
633
3798.9
code93 - Steel stands
2
2480
4960.2
code94 - Supplying, erecting, testing & commissioning of OFF-LINE UPS system suitable for operation on 230V,50Hz,A/C supply,with all accessories complete and Excluding batteries and wiring complete. 2 kVA OFF LINE UPS
1
22357
22357.65
code95 - Supplying, erecting, testing & commissioning of OFF-LINE UPS system suitable for operation on 230V,50Hz,A/Csupply,withallaccessories complete and Excluding batteries and wiring complete. 1kVA OFF LINE UPS
1
15841
15841.35
code96 - Supplying, installation,testing & commissioning of12VDC,AH batteries in polypropylene container for U.P.S.Sealed maintenance free batteries.. 100 AH capacity
3
13051
39154.5
code97 - Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box,elbows,screwsatan interval of 300 mm as required. 20mm
550
29
15950
code98 - Supplying And Fixing"S"Hook made out of 14mmdia M.S.Rod.
10
54
546
code99 - Supplying and wiring adopting loop system inexisting PVC Conduit/casing capping casing capping using2x1.5Sqmm(Phase&Neutral)&1x1.0sqmm(Earthwire)FRLS multistrand PVC insulated copper wire(confirmingtoIS-694:and latest amend ments) without controls witch shall be fixed on the existing plastic sheet/gangbox,the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for Each outlet. Short point upto 3Mtr from tapping point to out let via switch box
20
282
5649
code100 - Medium point above 3Mtr upto 6Mtr from tapping point to outletvia switch box
20
397
7959
code101 - Long point above 6Mtr upto 10Mtr from tapping point to outlet via switch box
10
582
5827.5
code102 - Wiring for lighting/power circuitusing one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring wit hspecified IS-694:2010 2.5 mm2
800
44
35280
code103 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100Vgrade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 4mm2
600
66
39690
code104 - Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS2509 with suitable size bends,junction boxes,adhesive pasteetc,and fixing using inverted wood plugs in case of RCC ceiling and RCCwall/stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.19/20 mm dia 2 mm thick
2000
72
144900
code105 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130-1984 and(Virgin)PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 3C x 4 mm2
2100
180
379260
code106 - Supplying and fixing surface/ flush mounting unbreakable PVC modular boxs Suitable for mounting modulars witch plates with due groove cutting in Brick/C.Cwall,including necessary raw lplugs,Machine/NF screws etc., complete. 4-5 Way
40
143
5754
code107 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos.of machine screws,bolts nutsetc.,complete on the existing metal/PVC box. 4 Module
12
183
2205
code108 - Supplying and fixing superior quality modulars witch mounting polycarbonate plate with necessary supporting back plate with required nos.of machine screws,bolts nutsetc.,complete on the existing metal/PVC box 8 Module
20
298
5964
code109 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos.of machine screws,bolts nutse tc.,completeontheexistingmetal/PVC box 10-12 Module
8
361
2889.6
code110 - Supplying and fixing of modular switch& connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch
150
107
16065
code111 - Supplying and fixing of modulars witch & connected accessories one xisting modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module
15
374
5622.75
code112 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch
5
342
1711.5
code113 - Supplying and fixing of modular switch &connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket
80
247
19824
code114 - Supplying capacitor type ceiling fan complete with down rod blades,shackle,can opiesetc,for operation on 230V,50cycles.Single phase A C supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200 mm) Regular model
10
3133
31332
code115 - Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing'S''hook with fan regulator to the existing board to get her with supplying and fixing 5A.ceilingrose,necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring.
10
179
1795.5
code116 - Fixing all types and all capacities offluorescent/falseceiling/spotlight/CFL/LED fittings indoor on the wall/ceiling/rafters/girdersusing23/0.0076"twin twisted PVC insulated wires,required nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders
50
128
6405
code117 - Supplying & fixing retrofit type-PL-LED Lamp W LED linear source with CCT6500 degree K, CRI greater than 70. efficacy greater than 80 lumen per W, life greater than 25000 burning hours, and CETOIS10322 or IEC60598,LM79&LM80.The LEDs are driven by an HF electronic driver integrated in the system, with a PF gain of 0.95; power loss should be less than the lamp wage. short circuit and open circuit protection to be integrated in the circuit, THD less than 20, life as per LM79.The operating input voltage should be between 130 and 275V. Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition 18-20w
50
737
36855
code118 - Supplying exhaust fan of 1440 RPM of 300mm (12) size with bracket blade complete for light duty suitable to operate on 230V 50Hz, AC Supply.
5
1566
7833
code119 - Supplying & Fixing of 230 V 20/40 W FluorescentLamp holder
20
34
693
code120 - Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets,with bolts and nuts and 5A,ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame.
5
742
3711.75
code121 - Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest
amendments. 2 HP, Size 50x40 Head 22M, Discharge 186 LPM
8
17842
142741.2
code122 - Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments. Upto 7.5 HP centrifugal pump
8
9975
79800
code123 - Supplying and drawing 3core flat PVC sheathed submersible pump cable manufactured with electrolytic grad copper with flexible copper with low resistance conductor confirming to 13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990. 3C x 4 mm2
200
176
35280
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements