Directorate Of Municipal Administration Tender

Providing and laying Reinforced cement concrete of mix design of M-25 Grade with cement @ 340 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.7 cum and fine aggregates @ 0.47 cum, super plasticiser @ 3lts confirming to IS-9103 1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating,curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges). KRDW&S SOR-2019-20 Pg. No.69, It.No.4.43

Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103 1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification for staging, columns and braces above ground level (exclusive of cost of steel and fabrication charges) KRDW&S SOR-2019-20 Pg. No.70, It.No.4.48

Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103 1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., completeas per design and specifications etc., complete for top rib and top dome or top slab (exclusive cost of steel and fabrication charges) KRDW&S SOR-2019-20 Pg. No.72, It.No.4.56

Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. KRDW&S SOR-2019-20 Pg. No.73, It.No.4.59

Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm 'C' section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete. KRDW&S SOR-2019-20, Pg. No.73, It.No.4.63.

Providing and constructing RCC hexagonal ventilator finial for RCC over head tank the finial to be constructed with CC (M-20) proportion using 20mm and down size jelly with reinforcement using 6mm dia., M.S. rods 4 nos., for each of the pillars both ways for full width of doom at 12cm c/c, the ventilator to be of 0.45 M x 0.5 M size provided with 25mm x 25mm x 5mm M.S. frame welded with diamond mesh to its full width and depth fully covered with aluminium mosquito mesh finished smooth with CM 1:3 proportion to required shape and size and ornamental finish including two coats of anti-corrosive paint for frame and mesh and two coats of cement paint matching to over head tank etc., complete. KRDW&S SOR-2019-20 Pg. No.73, It.No.4.65

Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out O of M.S.angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.) KRDW&S SOR-2019-20 Pg. No.73, It.No.4.66

Supplying, and Fixing Cl puddle flanges confirming to IS 7181-1986 with latest o amendments in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc complete. KRDW&S SOR-2019-20 Pg. No.97, It.No.10.18

Supplying, and Fixing Cl puddle flanges confirming to IS 7181-1986 with latest o amendments in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc complete. KRDW&S SOR - 2019-20 Pg. No.97, It.No.10.17

Providing 80 mm dia Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. KRDW&S SOR-2019-20 Pg. No.196, It.No.15.59

Providing 80 mm dia Duck foot bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. KRDW&S SOR-2019-20 Pg. No.195, It.No.15.58

Providing 2 coats of Snowcem/Water-proof cement paint of approved colour and shade over one coat of primer including curing etc., complete for RCC over head tank. KRDW&S SOR-2019-20 Pg. No.74, It.No.4.70

Providing and fixing 304 grade stainless steel hand rails of 14 gauge pipes for ramps staircase made out of stainless steel hallow pipes using 50mm dia for verticles @ 1.60m c/c fixed to the ramps or steps by drilling with bolts and 100mm dia MS base pates 10mm gauge for fixing of verticle pipes 04 Nos anchor bolts and 40mm dia pipes fixed horizantally 2 rows top, 1 pipes fixed with verticle pipes another one fixed with elbos and 25mm dia pipes are fixed horizantally 2 rows below top measure @ eual intervals including, welding, wherever with suitable caps @ tops, bottoms and corners finishing with matt/ Shinning etc compleate including cost and coveyance of all materials, labour for all items of work, HOM with all lead and lifts, loading and unloading, transportation charges and all other incidental charges etc, complete as per specification and direction of the Engineer in charge of the work. Page no 45, I.No7.39 PWD SR 2018-19

KSRB 2-2.2 : Earthwork excavation by manual means for foundation of buildings, water supply and and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in soil not exceeding 1.5m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m. including breaking of clods complete as per specifications.Specification No: KBS 2.1(b) / 2.3.5 In hard soil Item No.2.4, Page No: 6, PWD SR 2018-19

KSRB 4-1.3: Providing and laying in possition plain cement concrete of mix M10 with OPC cement @ 180Kgs, with 40mm and downsize graded granite metal coarse aggregates @ 0.85 cum and fine aggregates @ 0.57 cum machine mixed, concrete laid in layers not exceeding 15cm thick, well compacted in foundation, and plinth cost of all materials, labour, HOM of machinery curing complete as per specification.Specification No KBS 4.1,4.2 I.No.4.3 Page No.13

KSRB 5.3-3: Providing and constructing granite/ trap/ basalt size stone masonary in basement with cement mortor 1:6 edges of stones chistle dressed in courses not less than 15Cm high, bond stones at 2mt. Apart in each course including cost of materials, labour,scaffolding curing complete as per specification.KBS.5.1.13, I.No.5.9 Page No.25

KSRB 6-3.2: Providng and constructing burnt brick masonary with approved quality non-modular bricks of standard size of class designation 7.5 newton per sqmm with cement mortor 1:6 for basement and superstructure including cost of materials,labour charges scffolding,curing as per specifications. Specification No.KBS 6.2, I.No.6.9, Page No.29

KSRB 4-1.6 : Providing and laying in position plain cement concrete of nominal mix 1:2:4using 20mm and down size graded granite metal, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2 .PWD SR 2018-19 Page No.12/ 4.6

KSRB 15-3.4: Providing 15mm thick cement plaster in single coat with cement mortar 1:3 to brick mansonry including rouding off corners wherever required smooth rendering,providing&removing scaffolding,incloding cost of materils labour,curing complete. I.No.15.12, Page No.115

Supplying and fixing M.S. Rectangular poles made out of 2 euql angles of 65X65X6mm weldeed together fixed in CC (1:2:4) with 2 nos 16mm dia M.S. Hold fast rods each of length 25cms. Including cost of all materials cutting, bending scaffolding wherever necessary, necely finishing the welded joints with all leads lifts and as per the directions of the Engineer-in-charge of the work and including providing 2 coats of approved quality paint over one coat of shop painting ( excluding cost of earthwork and concrete) ncluding cost of materials, Labour, HOM complete as per specfifications. I.No.37.2, P.No.266

Providing Chain link fencing 50mm size of 8guage properly stretched between rectangular poles and fixed with suitable bolts and nuts, the free end shell be welded to the pole and block pipe and at top and bottom as required including cost of all materials, labopur, lead and lifts and as per the direction of the Engineer -in-Charge of ork including two coats of approved quality paint over one coat of Shop paint, including cost of all materials, labvour, HOM complete as per specifications. I.No.37.30 P.No.266

Providing and fixing M.S.gate as per chief Architect Drawing using 50mmx 50mm 14 guage M.S Hallow pipe frame work bent to ornamental shape as shown in the drawing and 35mmx6mm and 16mm square rods for vertical alternativelly spaced at 4cms c/c in two halves and 40mmx6mm M.S flats for horizantal member and at the top cast iron spikes are provided at alternate vertical members as shown in the drawing etc., complete . All the steel surface should be thoroughly cleaned free of rust and painted with anti corrosive paint (shop paint) etc., complete. The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, with lead and lift, loading and unloading charges, etc., complete as per specification. I.No:7.37, P.No: 45, PWD SR 2018-19