Directorate Of Municipal Administration Tender

code05 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD CSR 2023-24 item no.2.4.2, Pg.No 17)

code06 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Qty at 70Kg/cum of concrete Quantity 13x70=0.91Tonne Total Quantity 1.91 Tonne (PWD CSR 2023-24 vol1 item no. 2.11a, Pg.No 18)

code07 - Supply of 200W LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70percent, CCT more than 5500K, IP 66 optical and electrical compartment and impact resistance of complete luminaire more than IK08. Power Factor more than0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 150W System Power consumption. LED Efficiencymore than 130lm/w, nominal CRI more than75. Luminaire manufacturer should have inhouse facility accredited by NABL/CPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree/Nichia/Lumileds/Osram make LED Source. PWD SR Vol-6 (2023-24) Page no 46, item no 11.9.6

code08 - wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper conductor single core wire in open or concealed system of wiring as per IS-694:1990 and confirming to GTP 1.5 sqmm Quantity 2X200=400mtr, 5X180=900 mtr, Total Quantity 1300mtr, PWD SR (2023-24) Page no 5 item no 2.3.2

code09 - Fixing halogen/metal halide/SVL/IL/LED floodlight fitting over exising pole/wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires Quantity 3X8=24 Nos, PWD SR vOL-6 (2023-24) Page no 56 item no 13.5

code10 - Supplying and fixing angle iron frame work fabricated out of MS angle iron 50X50X6mm and MS flat with bolt washer etc., and painted with 2 coats of redoxide and then two coats of approved paint. Quantity 3X8=24mtr, PWD SR VOL-6 (2023-24) Page no 56 item no 5.41.2

code11 - Fabricating Supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locing arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint, etc complete., Quantity 3X7500=22500sqcm,PWD SR VOL-6 (2023-24) Page no 20, Item.No 5.42.2

code12 - Supplying and fixing miniature circuit breaker on existing MCB distributing boards using necessary fixing materials and ‘C’ type Curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898 a) 6-32 Amps SP Quantity 2X8=16 Nos, 5X6=30 Nos, Total Quantity 46 Nos, PWD SR VOL-6 (2023-24) Page No. 17, Item No 5.18.1

code13 - Supplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (Except 2CX10 sqmm wire armoured) confirming to IS 3975;1990 (No of strips indicated in GTP) and extruded PVC outer sheated armoured cable with specified IS-1554 part-1;1988 and confirming to GTP of GROUP-A 4 core 10sqmm, PWD SR (2019-20) P.No. 40, Item No 6.4.2

code14 - Supplying and fixing of class A(medium duty) GI Pipe of wall thickness not less than 3.25mm on Pole/Wall/Drain crossing with necessary clamping arrangement for UG cable of 1.1KV a)50mm, PWD SR (2019-20) Page. No. 42, Item No 6.9.2

code15 - Supplying and fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32 Amps, PWD SR VOL-6 (2023-24) Page.No.14,Item.No.5.7.2

code16 - Supplying and fixing of 4 pole power contractor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS -13947 25Amps PWDSR(2019-20) Page.No.26, Item.No.5.13.1

code17 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. PWD SR (2023-24) Page.No. 21,I.No.5.48

code18 - Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. In Ordinary Soil, PWD SR (2023-24) Page.No. 63,I.No.29.02

code19 - Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtr 29.07, PWD SR (2023-24) Page.No. 63,I.No.29.02

code20 - Labour charges for laying of 1.1KV class UG cable in existing trench GI pipe/stone ware pipe/on pole as required. In existing trench/duct 6 Sqmm to 16 Sqmm, PWD SR (2023-24) Page no 52 item no 21.05

code21 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20 Amps single phase Class-1 Accuracy with Temper Proof Energy Meter. PWD SR VOL-6(2023-24) Page no 19 item no5.30)

code22 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutout and other equipments on the meter board using 40 mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit…The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 122mm dia. PWD SR VOL-6(2023-24) Page. No.54, Item .No. 12.56

code23 - Supplying heavy guage PVC conduit pipe 32mm dia 2.5mm thick confirming to IS 2509 with suitable size bends, juntion boxes adhesive paste etc.. A nd fixing using inverted hood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cemement plastering the damaged portion using heavy guage saddles at an interval of 700mm using NF screws. PWD SR (2019-20) Page no 2 item no 1.1.3

code24 - Fabricating, supplying and erection of 10 m - Top 75 mm and Bottom 165 mm dia ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for 10m Pole in single section and single joint welded as per IS 9595/IS10178AWS with 3 mm thick, suitable base plate and 4Nos of.........long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc. ,(excluding foundation) as per drawing appended PWD SR Vol-6 (2023-24) Page no 12, item no 4.4.8

code25 - Fabrication, Supplying, Erection, Testing and Commissioning of 8.0 Mtrs long Decorative Pole MS with PU Paint Pole, Single Arm, Base Plate, Foundation Bolts , Inbuilt Junction Box, Connector etc (market rate)

code26 - Supply of 150W LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70percent, CCT more than 5500K, IP 66 optical and electrical compartment and impact resistance of complete luminaire more than IK08. Power Factor more than0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 150W System Power consumption. LED Efficiencymore than 130lm/w, nominal CRI more than75. Luminaire manufacturer should have inhouse facility accredited by NABL/CPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree/Nichia/Lumileds/Osram make LED Source. PWD SR Vol-6 (2023-24) Page no 46, item no 11.9.6

code27 - Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches.29.09 CC road