Directorate Of Municipal Administration Tender

6.8 - Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking theselected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.( public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 2 I.No.6.8 P.No.5)In all kinds of soils Depth upto 1.5 m

2.1.3 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.( public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - I I.No.2.1.3 P.No.15)

2.11h - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification( public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - I I.No.2.11 h P.No.18)

2.2.1 - Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications ( public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - I I.No.2.2.1 P.No.15) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

A-22 - Formwork shall be added on percentage basis to the finished concrete item rate for Drain formwork shall be considerd as 8% DSR 2023-24 Volume-II Page No. A(7)

4.5.2 - Fabrication,Supplying,Erection,Testingand Commissioning of.m s long Polygonhigh mast with Single/Multiple telescopic sections having, (minimum over lap distance of1.5 times of top section) thickness as per BSEN10025 grades 355JO/ASTMA572-50 steel sheet plate for shaft suitable to with stand a wind velocity of 47m/sas per IS875 part3 (as per GAD rawing).Base plate as per IS2062/ASTMA572-50.The mast shall be Galvanized in single Hot-dip as per BSENISO1461/ASTMA123with an average 70 microns as per IS2629, and welded as per BS5135Single L-Seamjoint The mast shall have 2 Way head frame with die cast LM-6 pulleys,stainless steel axle,Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5mmdia,stainless steel wirerope of AISI304 grade7/19-core, (Factor of Safety as per TRno 7) .2.5mm 2EPRinsulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement The mast shall have manual/ powertool (Suitable reversible geared motor operating on 230/415V,50Hz,shall be provide above 15Mtr mast) The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS1239.The mast shall beerectedon existing RCC footing.The mast shall be supplied with 3mm thick template,lightning arrester of 1.2m length galvanized pipe with to parrow fitted on top of the head frame cover and GL Stype aviation twin lA fitting with wiring complete.(excludingfoundation)asper technical data. ( public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 6 I.No.4.5.2 P.No.13)12 m/12.5 m - Top 100 mm and Bottom 310 mm dia

11.9.6 - Supply of LED flood light luminaire withpressurediecastaluminiumhousingbodyforoptimalthermaldissipation.LampcompartmentcomprisingofantiglarecleardiffuserwithInjectionmouldedpolycarbonate/clearglassmaterial,deliveringsuperiorlightoutputRatedlifeBurningHrs50000hr@LumenMaintenanceof70%,CCT5500K,IP66opticalandelectricalcompartment&impactresistanceofcompleteluminaireIK08.PowerFactor0.9withmains,SurgeProtectionMin5KValongwithOvervoltage/Overload,shortcircuit/misswiringprotection.Compatibleforpolemaulingwithouterdiaof40mmto50mm.UniversalVoltagedrivertooperatewidevoltagerangefrom100Vto270V50/60Hzapplication.CompliancetoIS10322/IEC60598,LM79&LM80AdherencewithRoHS.ULapprovedMCPCB.Topaccessstreetlightwithsinglescrewtoensureeaseofmaintenanceatthesightsitelocationwithminimizedminimaltools.LEDLightfixturewith.WSystemPowerconsumption.LEDEfficiency1301m/w,nominalCRI75.LuminairemanufacturershouldhaveinhousefacilityaccreditedbyNABL/CPRI&anyGovernmentcertifiedagency&Design&DevelopmentfacilitycertifiedbyISO90012008.Housingwithsupplierwordmark/nameshallbeEngraved/Embossingonthediecasthousing/BodypartWarrantyof2YearsagainstanymanufacturingdefectworkingunderstandardelectricalconditionsasmentionedaboveshouldbegivenbyLEDanufacturer&Cree/Nichia/Lumileds/Osrammake LED Source.( public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 6 I.No.11.9.6 P.No.46 of 105)LED Floodlight 180W

32.05 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) ESCOM Common SR 2023-24(P.No- 13 I no-32.05]

5.43.1 - Supply and Installation /Fixing /Provision of Pole box with HRC Fuse/ MCB provision and suitable connector /terminalfor 3Ph/1Ph connections with Loop-In & Loop-Outter minals for 10mm2/25mm 2 3.5 C AI/Ar/Cu/Ar Cable and branch out 2.5 mm2 2 core AI/Cu PVC Insulated cable, enclosed in a Thermo plastic, Polystyrene enclosure, which should be shock proof, safe, IP65 (Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasket with provision for cable entry through IP65 Thermoplastic, polyamide glands and/or grommets.( public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 6 I.No.5.43.1 P.No.20) 200 mm x 200 mm x 98 mm

2.5.9 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130-1984and(Virgin)PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990( public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 6 I.No.2.5.9 P.No.6) 4C x 2.5 mm2

11.4 - Supplying heavy gauge PVC conduit pipe …….dia.mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using NF screws (P.No- 2 I.no, 1.1.4] 40 mm dia 2.5mm thick

21.05 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm [ p, no-09 I no-31.05] ESCOM Common SR 2023-24 part-4 (P.No- 52 I no-21.05] 16 Sqmm, 4 Core

13.39 - Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. [P.No-157 Item no-13.39]

5.41.3 - Supplying and fixing angle iron frame work fabricated out of M.S.angle iron. and M.S.Flat. with bolts,washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint.( public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 6 I.No.5.41.3 P.No.20) 75 x 75 x 6 mm

5.48 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.( public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 6 I.No.5.48 P.No.21)

5.17.1 - Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC61439-3 and IK09 tested as per IS/IEC62262with minimum IP43 protection provided with Polyurethane (PUR) gasket,with suitable earthing system, on wall/woodboard/ flush mounting using required clA,bolts,nuts,etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3phase Doubled oor with necessary bus barcompletely wired to use on 440V3 phase 4 wire powder coated painting etc.,complete witha provision for fixing of single/three phase suitable capacity MCB's as outgoings confirmingtoIS/IEC 60898 - 2. 4 way ( public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 6 I.No.5.17.1 P.No.17)

13.18.1 - Fixing of. ATPST/change over switch/ Contactor along with neutral link with screws, bolts,nut sand wiring using required capacity wires and circuit labelling ( public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 6 I.No.13.18.1 P.No.17) 15A to 63A TPST

5.7.3 - Supplying & fixing of Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers.( public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 6 I.No.5.7.3 P.No.14) 63A

46.01 - Pole Mounted Fibre Glass Reinforced Aerial Fuse Board 60 Amps - 3 Way(Dwg No. BESCOM/GM/QS&S/24 Dtd 24.11.2018) ESCOM SR Ele Vol -6 SR-2023-24 [P-21 I NO-46.01]

13.07 - Labour- fixing of Pole Mounted Fibre Glass Reinforced Aerial Fuse Board 60 Amps - 3 Way(Dwg No. BESCOM/GM/QS&S/24 Dtd 24.11.2018) ESCOM SR Ele Vol -6 SR-2023-24 [P-48 I NO- 13.07]

5.30 - Supplying, fixing and wiring Electronic Trivector Meter(ETV) 5to20A single phase Class-1 Accuracy with Temper Proof EnergyMeter. (P.No- 19 I.no-5.30] ESCOM Common SR 2023-24