Directorate Of Municipal Administration Tender

code04 - Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GGBS@ 90 kg/m3 (75:25 proportion) as per approved mix design procedure and thickness as per design, over a prepared sub base. The superplastisiser confirming to IS 9103-1999 Reaffirmed-2008 Coarse aggregates and Fine aggregate confirming to IS:383-2016, transported to site, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work). Spreading the concrete with shovels, rackers and compacted using needle, suitable plate vibrator and finished in a continuous operation including provision of separation membrane and Hessian cloth finishing to lines and grades complete including cost of all materials, labour, all lead & lift, loading charges as per specification & direction of Engineer - incharge of the work. (Groove cutting shall be paid seperately) PWD Common DSR 2023-24 Volume 3 (P No: 51 I.No:.6.6 )

code05 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.. PWD Common DSR 2023-24 Volume 2 (P No: 63 I.No:9.25 )

code06 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. )Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates(Comman SR-2023-24,Vol-1)I.NO-2.1.6 Page No-15

code07 - Groove cutting Providing Groove Cutting for widht of 5 mm to 10 mm and depth 80 mm to 100 mm including cost of cutting machine, generator and HOM , including cost of blade, coolant , etc, including clearing of Groove, and providing sand, and hot bitumen fillers, and filler metal etc, including cost of conveyance, of all materials, labour, lead and lift charges, and all other incidental charges, adn as per drwwings and as per specificatioins. PWD CSR 2019-20 ITEM NO 22.8.1 PAGE NO 176