Directorate Of Municipal Administration Tender

code04 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(PWD SR 2023-24, V-02, Pg No:-50, Item Code:-8.51)

code05 - Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge.(PWD SR 2023-24, V-02, Pg No:-51, Item Code:-8.55.2)

code06 - Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.(PWD SR 2023-24, V-02, Pg No:-50, Item Code:-8.54.2)

code07 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24, V-02, Pg No:-46, Item Code:-8.30)

code08 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24, V-02, Pg No:-48, Item Code:-8.40)

code09 - Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.(PWD SR 2023-24, V-02, Pg No:-64, Item Code:-9.31)

code10 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(PWD SR 2023-24, V-02, Pg No:-26, Item Code:-7.38)

code11 - Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge.(PWD SR 2023-24, V-02, Pg No:-77, Item Code:-11.2) (Including Door, Grill Work)

code12 - Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each Components(KUWSSDB SR 2023-24, V-05, Pg No:-247, Item Code:-21.1.10)For 1000 LPH FRP :Skid Type

code13 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall(KUWSSDB SR 2023-24, V-05, Pg No:-122, Item Code:-13.31.3)25 mm nominal dia pipes

code14 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.(PWD SR 2023-24, V-02, Pg No:-87, Item Code:-11.35.1.2)

code15 - Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thickconfirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc , and fixing using inverted wood plugs in case ofRCC ceiling and RCC wall/ stone structure or rawl plugs in case ofbrick walls and cement plastering the damaged portion using heavygauge saddles at an interval of 700mm using NF screws.(PWD ELE SR 2023-24, V-06, Pg No:-02, Item Code:-1.1.1)19/20 mm dia 2 mm thick

code16 - Supplying and fixing PVC/metal conduit Deep junction box(PWD ELE SR 2023-24, V-06, Pg No:-02, Item Code:-1.5.1)

code17 - Supplying and fixing surface/flush mounting unbreakable PVCmodular box suitable for mounting modular switch plates with duegroove cutting in Brick/C.C wall, including necessary rawl plugs,Machine/NF screws etc., complete.(PWD ELE SR 2023-24, V-06, Pg No:-08, Item Code:-3.3.1)

code18 - Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board.(PWD ELE SR 2023-24, V-06, Pg No:-08, Item Code:-3.14.1, 3.14.3 )6A SP Switch

code19 - Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board.(PWD ELE SR 2023-24, V-06, Pg No:-08, Item Code:-3.14.1, 3.14.3 )6A Three Way 5 Pin Socket

code20 - Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral)& 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box,the other end of the wires shall be terminated with sufficient looselength in a wood/PVC round block. complete for each outlet(PWD ELE SR 2023-24, V-06, Pg No:-05, Item Code:-2.2.2)Medium point above 3Mtr upto 6Mtr from tapping point to out let viaswitch box

code21 - Supplying of .....feet PVC Batten with integrated LED tube .... Wwith high quality diffuser with Life of 25000 burning hours & 70%lumen maintenance with CRI Graterthan 80. Power Input: 220-240V@50/60Hz & Power factor Graterthan 0.9 along with CE approved. 2 yearsWarranty against any manufacturing defect working under standardelectrical condition(PWD ELE SR 2023-24, V-06, Pg No:-43, Item Code:-11.3.3)LED light fitting 1 x 4 - 36/40 W

code22 - Supplying & fixing miniature circuit breakers on existing MCBdistribution boards using necessary fixing materials and C Typecurve, indicator ON/OFF, energy cross-3 with Short circuit breakingcapacity of 10K and complete wiring as required confirming to IEC60898.(PWD ELE SR 2023-24, V-06, Pg No:-17, Item Code:-5.18.6)50-63 A DP

code23 - Supply and fixing polished wood board made of not less than15mm thick plank on both sides of not more than 2 pieces andfixing the same to the wall using tapered inverted wooden plugsscrews.(PWD ELE SR 2023-24, V-06, Pg No:-14, Item Code:-5.6.5)15 x 12 x 2

code24 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to32/63 A three phase 4 wire whole current class-1 Accuracy EnergyMeter(PWD ELE SR 2023-24, V-06, Pg No:-19, Item Code:-5.35)

code25 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. (PWD SR 2023-24, V-01, Pg No:-10, Item Code:-1.17.1)All kinds of soils. Depth upto 1.50 m

code26 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing)etc(KUWS&DB SR 2023-24, V- 5, Pg No:113, Item No: 10.1.5)PVC pipes 75mm dia., 6Kg/Sqcm & Class 3

code27 - Supply and delivery at site of brand new best make Gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments(KUWS&DB SR 2023-24, V- 5, Pg No:154, Item No: 13.24.2)Size 65 mm

code28 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications (PWD SR 2023-24, V- 01, Pg No:07, Item No:1.10)