Directorate Of Municipal Administration Tender

Code 4 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead &lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurt enances required to complete the work as per technical specifications. Mix1:3:6(M10) Using 40mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement & formwork shall be paid separately) (V-1,/P.No.15, I-2.1.3) ---- ANY CIVIL WORK

Code 5 - Providing and laying in position cement concrete for all Basement & surface level works,return walls, retaining walls, sunken floors etc. The granite /trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laidinlayers ,well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts ,cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(The cost of steel reinforcement & formwork to be paid separately) (M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates) (V-1,/P.No.16, I-2.3.1) ---- ANY CIVIL WORK

Code 6 - Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges,Drainworks & other parallel works from 0.50m to 3.50m height.The granite /trap/ basalt crushed graded coarse aggregate sand fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers well compacted using needle vibrators, providing weep holes wherever necesary ,including all lead & lifts,cost of all materials of quality, confirming to the requirements of relevant IS codes, labour,Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) (M20 DesignMixUsing20mmnominalsizegradedcrushedcoarse aggregates) (V-1,/P.No.16/17, I-2.4.2) For Footing ---- ANY CIVIL WORK

Code 7 - For Plinth Beam ---- ANY CIVIL WORK

Code 8 - For Slab ---- ANY CIVIL WORK

Code 9 - For Lintel Beam ---- ANY CIVIL WORK

Code 10 - Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. ( .P.No.18/Vol-1/2.11) ---- ANY CIVIL WORK

Code 11 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand (V-2,/P.No.9 I-5.4) ---- ANY CIVIL WORK

Code 12 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ( P.No.17/Vol-2/6.32) ---- ANY CIVIL WORK

Code 13 - Extra for forming cavity 5 cm to 11.5 cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. ties 300 mm long of 25x3 mm section at not less than 3 ties per m2as per approved design. (V-2,/P.No.14, I-6.9) ---- ANY CIVIL WORK

Code 14 - Plastering .Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (V-2,/P.No.41, I-8.2.2) ---- ANY CIVIL WORK

Code 15 - Plastering Providing 18mm cement plaster in two coats under layer 12mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with atuoplayer 6mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (V-2,/P.No.42, I-8.8) ---- ANY CIVIL WORK

Code 16 - Plastering Providing 12mm cement plaster with Cement mortar 1:3(1 cement: 3coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering ,providing and removing scaffolding , including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (V-2,/P.No.42, I-8.6.1) ---- ANY CIVIL WORK

Code 17 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace /Chajjas /Sunken portion of WC: Bathroom, cold applied PU water proofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTMD 412. The water proofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT(dry film thick ness) of 1mm including prime coat of epoxy primer @ 150g per m2 and protection with 120 gs m Geo-textile over the water proofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (V-2,/P.No.149 I-15.1) ---- ANY CIVIL WORK

Code 18 - Painting Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even andsand paper smooth,costofmaterials,labourcompleteasperspecificationsandas per directions of Engineer-in-charge. (V-2,/P.No.45 I-8.25) ---- ANY CIVIL WORK

Code 19 - Finishing walls with textured exterior paint of required shade: Newwork (Two coats applied @3.28ltr/ 10m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops. (V-2,/P.No.45 I-8.29) ---- ANY CIVIL WORK

Code 20 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size ,including necessary filling up the gap sat junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling,C.P.brass / stain less steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (an odised transparent or dyedtore- quired shade according toIS:1868, Minimum anodic coating of grade AC15) including cost of materials, labour,usagechargesofmachinery complete as per specifications. (V-2,/P.No.87 I-11.35.2.1) ---- ANY CIVIL WORK

Code 21 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: ( V.5,Pg No 113, Item No.10.1.7) 1.7 M010GPVC pipes 110mm dia., 6 kg/sqcm & class 3m394 ---- ANY CIVIL WORK

Code 22 - Refilling available earth around trenches /pipe lines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications. (V-1,/P.No.7, I-1.10) ---- ANY CIVIL WORK