Directorate Of Municipal Administration Tender

6.8.2 - Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification). Ref to MoRT&H : IRC - IRC SP 63:2018

2.3.1 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

8.64 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of Engineer in charge.

8.60 - Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. as per specifications and as per directions of Engineer in charge.

8.58 - Distempering with dry distemper of approved brand and manufacture (one coats) and of required shade on old work to give an even shade. as per specifications and as per directions of Engineer in charge.

M R - Platform M. G. R GPE 67 DIMENSION Product area 1500 mm dia Safe play area 2500 mm dia GENERIC Scope A popular fixture at fairs playground among children Design As per representative image attached at QR Spcn Product description It is large circular platform and rotates around a stationary pole Product structure Railings platform platform support frame triangular frame bearing assembly and center support pipes Colour As per Buyer choice Ideal for children Of age group 5 to 12 years Children allowed at a time 5 All open ends of pipe been closed for user Safety against entrapment By PVC caps Mode of supply Knocked down to be assembled at consignee site by consignee himself Approval of advance sample No advance sample RAILINGS Railings Which are designed for standard grip requirement Railing made up of 20 NB galvanized pipe conforming to IS 1239 latest with GI thickness of 60 Railing frame or safety against entrapment of head neck Three number frames are fixed to FRP platform reinforced structure PLATFORM AND SUPPORT FRAME Platform design and size Metal platform dia 1500 mm with aluminium chequered sheet for anti skid surface Sheet thickness 16 SWG 1.626 mm Platform support made up of ISA conforming to IS 808 latest 40 mm X 40 mm X 5mm and 25 mm X 25 mm X 5 mm including ISF conforming to IS 1730/latest 130 mm X 50 mm X 10 mm and 65 mm X 50 mm X 5 mm all welded together to a 25 NB bend pipe to form a structural frame TRIANGULAR FRAME Triangular frame made up of C channel 75 mm X 40 mm X 5 mm welded together to form a triangular frame with plates welded to the three vertices for mounting the FRP platform C Channel Conforming to IS 1173 latest and GI coated for rust free operation

M R - SKY WALKER DIMENSIONS: -1720mm (Length) x 630mm (Width) x 1750mm.(Height) SAFE AREA: 2.7Mtr x 1.6Mtr. Sky Walker Equipment made from Cclass G.I. Pipe of different NB. NB stands for Nominal Bore Sizes ie. Internal Diameter of pipe in millimeters The main frame pipe is of 80mm NB made from C Class G.I. Material which is bend at the radius of 250mm. The leg movement frame is of 50x50mm x 3mm thick CRC square pipe. Sleeves are made up of 100 mm OD M.S. pipe with thickness 5mm. This results in easy replacement of bearings, pins and handle. The handle frame is of 25mm NB made from "C" Class G.L. pipe. The foundation used for fixing is a structure and made from center pipe of G.1. of 80 NB "C" class. Welded with M.S. round plate of 250 mm & 10mm thick Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Two foundations are provided for rigid support. The footrests made from Aluminum casting material of size 130 X 310 X5mm. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of 25mm SAE8620 bright material. Pins are fixed at the outer end with M8 grub screws and Dia.8mm SS ball. The bearings used are "6205zz" are permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts bolts are used for assembly. The cerclips used for assembly are of A24 type. The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness

M R - THI-CHI SPINNER (4 WHEEL) Thi-chi spinner Equipment made from "C" Class G.I., pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The center pipe is of 100NB made up of "C" Class G.L. pipe The bottom welded with support of M.S. round plate of 250 mm & 10mm thickness. The handle movement frame is of 25mm NB made from "C" Class G.l. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class Welded with M.S. round plate of 250mm & 10mm thick. Main pipe supported with 25 mm x 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Foundation cover Closing Cap is made from FRP Material with 0.7 mm Thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of 25 mm of SAE 8620 bright material. The bearing used is "6201zz" & "6205zz" permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nut bolts are used for assembly. The cerclips used for assembly is of A 24. The nylon bush is used for handle knob. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

M R - CHEST PRESS CUM SEATED PULLER DIMENSIONS: - 2000mm (Length) x 710mm (Width) x 2200mm. (Height). SAFE AREA: 3.0Mtr x 1.7Mtr. Chest press cum seated puller equipment made up of "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters The center pipe is of 100NB made up of "C" Class G.I. pipe. The bottom welded with support of M.S. round plate of 250 mm & 10mm thickness. The connecting pipes are made up from 25NB "C" class G.I. pipe. The handle frame is made up from 32NB "C" class G.I. pipe. To build structure bushes are used which are made from seamless pipe of 50mm O.D. and 6mm thickness as well as 50mm diameter solid bar is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class welded with M.S. round plate of 250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. The bearings used are of "6205zz" & "6203zz" permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts are used for assembly. The cerclips used for locking is made up of A24 & A16 The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

M R - PARALLEL BAR DIMENSIONS:- 1870mm (Length) x 530mm (Width) x 2000mm. (Height). SAFE AREA: 5.0Mtr x 2.5Mtr. Parallel Bar equipment made from "C" class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The main frame made from 50NB "C" Class G.I. pipe. The handle frame is of 32NB made from "C" Class G.I. pipe. The foundation used for fixing is 25mm x25mm x3mm thickness L. Angle. Closing Caps are made up of high quality Fiber reinforced Plastic material. The powder coating done with Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

M R - DOUBLE TWISTER DIMENSIONS 1150mm (Length) x 1150mm (Width) x 1580mm. (Height). SAFE AREA: 2.1Mtr. Double Twister made from "C" Class Galvanized Iron (G.L.) Pipe of different NB NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The Center Pipe is of 100NB made from "C" Class G.I. Round Pipe. The bottom support welded is of M.S. round plate of 250 mm & 10mm thick. The standing frame is of 32NB made from "C" class G.I. pipe. The handle frame of triple twister is of 25 mm NB made from "C" class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80mm NB "C" class welded with M.S. round plate of 250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness The standing plate is fitted on the frame made up of 80 NB GI. pipe. M.S. Round Plate of size 300mm x 10mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The Pins used are made up of 35 mm SAE 8620 bright material. The bearings used are of 6205zz permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness

M R - AIR WALKER DIMENSIONS 1060mm (Length) x 810mm (Width) x 1600mm (Height). SAFE AREA 2.0 Meter x 1.8 Meter Air Walker Equipment made from c class G.1. Pipe of different NB. NB stands for Nominal Bore Sizes Internal Diameter of pipe in millimeters The main frame pipe is of 80mm NB made from cClass G.I. Material which is bend at the radius of 250mm. The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be easily disassembled from main frame The bottom support of M.S. round plate of 250 mm 10mm thick. The leg movement frame is of 32NB made from c Class G.I. pipe. This link is supported with MS flat of size 60X8mm. The handle frame is of 25NB made from cClass G.l. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB c class welded with M.S. round plate of 250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Foundation cover Closing Cap is made from FRP Material with 0.7 mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 25mm are made up from SAE 8620 bright material A24 circlips are used for assembly The bearings used are 6205zz permanent lubricated sealed bearing of reputed brand. High tensile steel galvanized nuts bolts are used for assembly. The powder coating is done by Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness. The footrests are made from casted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 250mm X 115mm X 3mm thick MS plate. To build structure bushes are used which are made from M.S.seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. Bolt M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust

M R - Rainbow Climber LK-CL-81:All round and rectangular pipes are GI or CR,ISI make,Gauge 14 gauge,two coating are red oxide and final paints of industrial paint,Nut boult GI,Bearing heavy,(Branded) FRP thickness 4-5 mm,Swing assembly 6 mm chain with rubber coating.(Size Length-12 Ft,Width-2Ft,Heigth-5Ft

M R - Sea Saw Double-Lk-SS-63:All round and rectangular pipes are GI or CR,ISI make,Gauge 14 gauge,two coating are red oxide and final paints of industrial paint,Nut boult GI,Bearing heavy,(Branded) FRP thickness 4-5 mm,Swing assembly 6 mm chain with rubber coating.(Size Length-8 Ft,Width-5Ft,Heigth-2Ft)

M R - Arch Swing two seater LK-SW-51:All round and rectangular pipes are GI or CR,ISI make,Gauge 14 gauge,two coating are red oxide and final paints of industrial paint,Nut boult GI,Bearing heavy,(Branded) FRP thickness 4-5 mm,Swing assembly 6 mm chain with rubber coating.(Size Length-10 Ft,Width-5Ft,Heigth-9Ft)

M R - FRP Dust bins:RABBITCODE NO LK-DB-123: Height1.28 mtr,Dia-1.55 mtr a)FRP Dust bins:of 3mm thickness b)Made with UV-Gel coat of reputed company c)FRP made with 450 emulsion glass reinforcedstunned mats of reputed company d)FRP doors of 3mm thikness for outlets. e)Holdfasts of 3mm thickness of MS Power coat. f)Painted with UV-PU emulsion paints.

M R - Two way slide:LK-SL-28:All round and rectangular pipes are GI or CR,ISI make,Gauge 14 gauge,two coating are red oxide and final paints of industrial paint,Nut boult GI,Bearing heavy,(Branded) FRP thickness 4-5 mm,Swing assembly 6 mm chain with rubber coating.(Size Length-15 Ft,Width-20Ft,Heigth-9Ft)

M R - Standing Mary go round LK-MGR-39 All round and rectangular pipes are GI or CR,ISI make,Gauge 14 gauge,two coating are red oxide and final paints of industrial paint,Nut boult GI,Bearing heavy,(Branded) FRP thickness 4-5 mm,Swing assembly 6 mm chain with rubber coating.(SizeDiametre 4Ft Heigth-4Ft)

M R - Duck Mary go round LK-MGR-46:All round and rectangular pipes are GI or CR,ISI make,Gauge 14 gauge,two coating are red oxide and final paints of industrial paint,Nut boult GI,Bearing heavy,(Branded) FRP thickness 4-5 mm,Swing assembly 6 mm chain with rubber coating.(SizeDiametre 5Ft Heigth-4Ft)

M R - Providing, Supplying and fixing of Benches including cost of materials, labour, Transport complete as per the direction of Engineer in charge.

M R - Supply Fixing of Double Ski Walker Metal All tubular steel of 2.5MM thickness are glavanized and zinc dipped. Joints are Robotic welded. All welded joints are scalloped as necessary and welded to an apprvoed MIG Process. All welds are dressed off removing all sharp edges and burrs. Zinc Primer paint is applied at all the welding points prior to dinishing. All metal parts are powder coated using AKZO nobel Great Wall powder to the thickness of 80 120 microns All metal parts are tested in our salt spray macjine that uses a 5 NaCI solution in accordance to ISO7227 to speed up corrosion for 3000 Hrs. Rubber High quality grip rubber is used for the hadles. Bearings Maintenance free ball bearings.Scope of Delivery 1 completely preassembled equipment modules.Maintenance Maintain according to EN 16630 and the maintenance guide. Safety All products must be tested ans certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified internaltional certifying agency such as IPEMA,TUV CPSC SGS only The GS Mark EN16630 Cetificates must be in the name of tendering party and not any 3rd Party All products must clearly deplay the GS Mark as has been issued in the EN 16630 safety certificates. SizeL W H: 1065 615 1364 mm. Weight: 51 KG Safety Area: 4090 x 3555 mm, Capacity 1 Person Model no KSWPO-205 T Including cost of materials tranportation labour with all taxes etc complete as per the direction of engineer-in-charge

M R - Suply of Coarse sand SR 2023-24, P.No.A-19, Sl.No.238