Directorate Of Municipal Administration Tender

code04 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates

code05 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

code06 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

code07 - Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code08 - Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

code09 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code10 - Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.

code11 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

code12 - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

code13 - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge.600 x 300 x 150 mm size

code14 - SCRAPPING AND REMOVING TOP SOIL:-Scrapping the area by removing 0.15m soil and removing of unwanted plants,grass along with roots. 25km initial transport,including lead, lift loading and unloading charges. (1x1x0.15mt)

code15 - 1ST DIGGING:-for developing lawn including removing weeds,debris if any and breaking of clumps, watering etc. (1x1x0.45mt)

code16 - 2ND DIGGING:-Digging of soil by removing grass etc if any and levelling of the soiletc .. (1x1x0.45mt)

code17 - procurement of quality red earth/soil and heap around pit (1x1x0.15mt)

code18 - Supply of inputs such as sand, FYM, Red earth in 1:3:6 ratio. mixing and spreading the mixture to 7.50cm thickness wherever requiredRed soil =0.0075x144

code19 - Farm Yard manure = 0.0225 x 144

code20 - Lawn development cost:mixing Inputs as per prescribed proportion and quantity and spreading, applying fertilizers, digging, levelling, and dibbling with lawn grass at a spacing of 5cmx5cm & as per the direction of the Officer in charge of the work.

code21 - Planting Border and Decorative plants

code22 - Palm

code23 - crotons plants

code24 - Rose

code25 - Hebiscus Plants

code26 - Labour Cost

code27 - Supplying heavy gauge PVC conduit pipe 20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.

code28 - Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let via switch box

code29 - Long point above 6m upto 10m from tapping point to out let via switch box

code30 - Wiring for lighting/power circuit using one 1 mm2 of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments

code31 - 1.1 kV Class Armoured Aluminium Cable with glands/lugs/ferrules :4C x 6 Sq mm

code32 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP

code33 - Fabricating supplying and mounting MS box made out 14SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.

code34 - Supply of LED Post Top Lantern with 15/20 W pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs50000hr at Lumen Maintenance of 70 percentCCT more than 5500K, IP66optical and electrical compartment & impact resistance of complete luminaire more than IK08. PowerFactor more than 0.9 withmains, Surge Protection-Min5KValong withOvervoltage/Overload, shortcircuit/miss-wiring protection. Compatible for polemounting withouter diaof40mm to 50mm. Universal Voltage driver to operate wide voltage range from100V to 270V50/60Hz application. Compliance toIS10322/1EC60598, LM79 & LM80 Adherence with RoHS. UL approved MCPCB LED Efficiency more than 1301m/w, nominal CRI more than 75. Luminaire manufacturer should havein-house facility accredited by NABL/CPRI & anyGovernment certified agency & Design&Development facility certifiedby ISO9001:2008. Housing with supplier word mark/name shall be Engraved/Embossing on the diecasthousing/Body part Warranty of 2Years against any manufacturing defect working under standard electrical conditions as mentioned above shouldbegiven by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source.

code35 - Fixing halogen/metal halide/SVL/IL/LED floodlight fitting over exising pole/wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires PWD SR (2019-20) Page no 79 item no 14.5