Directorate Of Municipal Administration Tender

code04 - Providing and fixing Casing Pipe. 160mm dia PVC kuWS DSR 2023-24 i.no.10.14.6 p.no.120

code05 - Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge ofwork and latest amendments.

code06 - Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no out door typ e NOTE: 1) DOLDirect Online Starter 2

code07 - Supply and delivery at site 25mm(1”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring, vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments.

code08 - Supply and delivery at site 25mm(1”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets

code09 - supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990with ISI Mark and as per its latest amendments.

code10 - Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit

code11 - Fixing of MeterBoard &Gescom charges.

code12 - Fixing of MeterBoard &Gescom charges.

code13 - Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges andsuch simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. PWD DSR 2023-24I.NO.1.4.1 P.NO.5 VOLUME NO.1

code14 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately).Mix 1:4:8(M5) Using 40mm nominal size graded crushed coarse aggregates. PWD DSR 2023-24 I.NO.2.1.2 P.NO.15

code15 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specificatio PWD DSR 2023-24 I.NO.12.11h P.NO.18 VOLUMENO.1

code16 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works ofbridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, costof all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) PWD DSR2023-24 I.NO. 2.4.2 P.NO.16 VOLUME NO.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse

code17 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates

code18 - Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto1.5mtr PWD DSR2023-24 I.NO.1.11 P.NO.7

code19 - Supplying and errection of cisterm tank 1200mm dia 2.5mts.ht (PRE gulb DSR 2012-13, I.NO.12,P.NO163.

code20 - Supplying, laying, joining, testing and commissioning og GI P ipes conforming to IS 1239:1990 with latest amendment, including fixing Collars, Elbows, Tees, Bends, Glad Cocks and other Fittings (Excluding cost of specials) with cuts and threads whereever necessary including conveying the materials to workspot, including testing for water tightness wirth all lead and lifts etc complete (contractors shall make his own arrangements for procuring water for testing).(kuws SR 2023-24.INO 11.1.3 P.NO.127

code21 - Distempering oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two coats) over and including water thinnable priming coat with cement primer after throughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specification and as per direction of engineer in charge.(DSR 2023-24 VOLUME NO 2, PAGE NO.45 I.NO.8.25.

code22 - Re-drilling of filled-up borewell, including yield test at final depth.