Directorate Of Municipal Administration Tender

code04 - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead (iii) Dismantling Brick / Tile work : By Manual Means ; b) In cement mortar

code05 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge

code06 - Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each components For 125 LPH : Cabin Type

code07 - Supply of Bag Filter Set

code08 - Repair of Boiler, Refrigarator, Grinder and Stove

code09 - Old Terrace tile surface repair with UV Resistant hybrid waterproofing coating Providing and Applying Polyurethane hybrid liquid applied GRIHA certified Waterproofing coating with flutyne protection technology, single component, cold applied, water based acrylic and UV resistant water proofing treatment to the Existing Roof having Tile or any non-porous surface applied 1.5 lm2 in 2 coats to achieve 1mm DFT, having tensile strength with 45 gsm glass fibre mesh 4N/mm2 confirming to ASTM D 412; Elongation at break 300% and Crack bridging ability up to 3mm, SRI Index 106 as per ASTM E 1980-01, Water permeability 5 bar Nil as per EN12390 - 8:2019, including surface preparation, priming the surface with single component high-performance waterborne tile primer which is suitable for non - porous surface at a rate of 0.083 Lm2 and spreading 45 gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwiched between the first and second coat completely as per specification. The finished cost to include surface preparation, making coving at Junction, treatment of cracks completely as per specification

code10 - Supplying and Fixing of 8 Nos of CC Camera & Monitoring System Including All Accessories & wiring, recharge and maintenance for 1 year

code11 - Supply of LED flood light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate /clear glass material, delivering superior light output Rated life Burning Hrs 50000hr Lumen Maintenance of 70,CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection Min 5KV along with Overvoltage Overload shortcircuit miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to50mm. Universal Voltage driver to operate wide voltage range from100V to 270V50/60 Hz application. Compliance to IS10322/IEC60598,LM79&LM80 Adherence with RoHS.UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with.70 W System Powerconsumption. LEDE fficiency 1301m/ w,nominalCRI 75. Luminaire manufacturer should have in- house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier wordmark/name shall be Engraved/Embossing on the diecasthousing/ Bodypart Warranty of 2 Years against any manufacturing defect working understandardele ctrical condition sasmentione da bove should begiven by LED manufacturer & Cree/Nichia/Lumileds/Osrammake LED Source.

code12 - Supply and Fixing of Exhaust Fan Including All Accessories

code13 - Supply and Fixing of 1 HP Mono block Motor Including All Accessories

code14 - Supplying and drawing Flexible Multi core Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 4C x 1.5 mm2

code15 - Supply and installation of 2Kg Stored Pressure Type, Pressure Gauge, Gross Weight 3.70kg. empty weight1.7 kg Can Height 344MM, Diameter 108 MM, Discharge Time minimum 8Sees, Controlable discharge mechanism, Range minimum 2 Meters, applicable on Class A, 8, C and electrically started Fire 8, Rating 88, Can Construction; Deep drawn & CO, Migwelded,Valve Construction: Forging & Machining, Internal Coating of Can: Epoxy Powder coating, External Coating of Can: Epoxy Polyster Powder coating, Sheet metal thickness: 1.60MM,E1195 Years Warranty within stalert system with Superior quality EPDM Rubber Hosepipeetc., including cost cost of supporting materials like MS stand & accessories if it is fixing n floor/ MS brackets & accessories if it is fixing on wall,, labour, usage charges of machinery complete as per specification s.Complete CE Approved And IS 1568 3

code16 - Supply of Cylindrical Water Tank double layered, Minimum Net Capacity up to effective height - 2000 litre tank, Minimum Wall & Bottom Thickness - 5.4 millimeter, Conforming to IS: 12701 (latest), Testing and Marking - As per clause 10 of IS 12701 (latest).