Directorate Of Municipal Administration Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 21,625Document Cost
Refer DocumentsTender Fee
₹ 500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DMA/2024-25/EL/WORK_INDENT33738Tender No
DMA/2024-25/EL/WORK_INDENT33738Tender Authority
Directorate Of Municipal Administration ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
code04 - Supplying and fixing PVC or metal conduit Deep junction box 25 mm deep Junction box ---- Pwd Electrical licenace
20
57
1153.6
... More
code05 - Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 1100V Grade COPPER conductor flexible multistrand FRLS PVC insulated 2x1.5 Sqmm Cable confirming to the GTP without switch the other end of the wires shall be terminated with sufficient loose lenght in a wood or PVC round block complete for each outlet Short point up to 3Mtr from tapping point to out let via switch ---- Pwd Electrical licenace
26
277
7203.82
... More
code06 - Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 1100V Grade COPPER conductor flexible multistrand FRLS PVC insulated 2x1.5 Sqmm Cable confirming to the GTP without switch the other end of the wires shall be terminated with sufficient loose lenght in a wood or PVC round block complete for each outlet Medium point above 3mtr up to 6Mtr from tapping point to out let via switch ---- Pwd Electrical licenace
27
390
10539.99
... More
code07 - Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 1100V Grade COPPER conductor flexible multistrand FRLS PVC insulated 2x1.5 Sqmm Cable confirming to the GTP without switch the other end of the wires shall be terminated with sufficient loose lenght in a wood or PVC round block complete for each outlet Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box ---- Pwd Electrical licenace
27
571
15434.55
... More
code08 - Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 confirming to latest amendments 1 sqmm ---- Pwd Electrical licenace
495
26
13256.1
... More
code09 - Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 confirming to latest amendments 1.5 sqmm ---- Pwd Electrical licenace
1500
26
40170
... More
code10 - Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 confirming to latest amendments 2.5 sqmm ---- Pwd Electrical licenace
550
43
23793
... More
code11 - Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 confirming to latest amendments 4 sqmm ---- Pwd Electrical licenace
450
64
29200.5
... More
code12 - Supplying and flush mounting powder coated or galvanised metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick or Stone or CC wall 1 to 2Way ---- Pwd Electrical licenace
2
142
284.28
... More
code13 - 4 to 5Way ---- Pwd Electrical licenace
2
182
364.62
... More
code14 - 6Way ---- Pwd Electrical licenace
4
226
906.4
... More
code15 - 8Way ---- Pwd Electrical licenace
2
268
537.66
... More
code16 - 10 to 12Way ---- Pwd Electrical licenace
16
328
5257.12
... More
code17 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws bolts nuts etc complete on the existing metal or PVC box 1 to 2 Module ---- Pwd Electrical licenace
2
141
282.22
... More
code18 - 4Moudule ---- Pwd Electrical licenace
2
180
360.5
... More
code19 - 6Moudule ---- Pwd Electrical licenace
4
241
964.08
... More
code20 - 8Moudule ---- Pwd Electrical licenace
2
292
585.04
... More
code21 - 10 to 12Moudule ---- Pwd Electrical licenace
16
354
5669.12
... More
code22 - Supplying and fixing of modular switch and onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6Amps one way ---- Pwd Electrical licenace
225
105
23638.5
... More
code23 - Supplying and fixing of modular switch and onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6A Three Way socket ---- Pwd Electrical licenace
140
176
24658.2
... More
code24 - Supplying and fixing of modular switch and onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator Two Module ---- Pwd Electrical licenace
31
367
11399.01
... More
code25 - Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Bell Push ---- Pwd Electrical licenace
4
182
729.24
... More
code26 - Supplying and fixing of modular switch and onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293 32A DP Switch ---- Pwd Electrical licenace
4
335
1343.12
... More
code27 - Supplying and fixing of modular switch and onnected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6 or 16A Universal Socket ---- Pwd Electrical licenace
4
243
972.32
... More
code28 - Supplying And fixing or eplacing of 6 or 16 or 32A electrical accessories on existing switch board 6A Batten Holder ---- Pwd Electrical licenace
34
76
2591.48
... More
code29 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C cure indicator ON or OFF energy cross 3 with Short circuit breaking cappacity of 10K and complete wiring as required Confirming to IEC 60898 6 to 32 Amps DP ---- Pwd Electrical licenace
5
761
3805.85
... More
code30 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C cure indicator ON or OFF energy cross 3 with Short circuit breaking cappacity of 10K and complete wiring as required Confirming to IEC 60898 50 to 63 Amps TPN ---- Pwd Electrical licenace
1
3180
3180.64
... More
code31 - Supplying fixing and wiring Residual current circuit breaker RCCB 240 or 450V upto 300mA sensitivity on existing wood or panel board 32 40A 2 pole ---- Pwd Electrical licenace
1
4695
4695.77
... More
code32 - Supplying and fixing regular MCCB distribution Panel confirming to IS or IEC 61439 3 and IK09 tested as per IS or IEC 62262 with minimum IP43 protection provided with Polyurethane PUR gasket with suitable earthing system on wall or wood board or flush mounting using required cl A bolts nuts etc with provision for fixing of suitable type capacity MCCBs as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc complete with a provision for fixing of single or three phase suitable capacity MCB s as outgoings confirming to IS or IEC 60898 2 12 Way ---- Pwd Electrical licenace
1
15994
15994.87
... More
code33 - Fabricating supplying and mounting MS box made out SWG suitable for floor or wall mounting, fully weather proof with provision for better heat dissipation provided with hinged front cover equipped with tamper proof locking arrangements with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc complete 16SWG ---- Pwd Electrical licenace
35000
-
15400
... More
code34 - Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve mounted on phenolic or FRP or DMC insulator which are mounted on powder coated 40x6mm MS flat frame work in existing panel board The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts nuts and washers etc complete 100Amps 4x30x6mm Aluminium Strips ---- Pwd Electrical licenace
1
2538
2538.95
... More
code35 - Supplying and fixing angle iron frame work fabricated out of MS angle iron and M.S. Flat with bolts washers etc and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- Pwd Electrical licenace
4
314
1256.6
... More
code36 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood or panel board using necessary screws bolts nuts necessary phase separators handle and wiring complete Protection of Overload and Short circuit in Thermal Magnetic Release Micro processor release shall have Earth Fault as per IS 13947Icu equal to100 percent lcs In 4P MCCB all Poles should have protection for Short icrcuit or Over Load ForMicroprocessor MCCBS Facility for segregating Priority andNon Priority loads must be available in the MCCB MCCB shall be provided with double insulation insulation between frontcover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open Multipole breakers shall be designed to break all thepoles simultaneously and they shall have a single mechanism FOUR POLE 100Amps 25kA ---- Pwd Electrical licenace
1
9050
9050.61
... More
code37 - Supplying and fixing of Shunt trip suitable for MCCB CBCT ---- Pwd Electrical licenace
1
1754
1754.09
... More
code38 - Supplying fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based digital readout of percentage leakage current programmable delay or auto or manual reset facility suitable to mount on DIN rail or flush mounting on panel board ---- Pwd Electrical licenace
1
9532
9532.65
... More
code39 - Supplying of multi function digital meter with three line back light LCD type display for voltage Current frequency Power power factor kVA kWH kVAR suitable for 3 phase 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- Pwd Electrical licenace
1
9594
9594.45
... More
code40 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230 or 440VAC 50 Hz 12 or 24V DC ---- Pwd Electrical licenace
3
530
1591.35
... More
code41 - 1.1 kV XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 Part 1 or IS 7098 Part 1 Armouring strip thickness and resistivity as per IS 3975 25 Sqmm 4 Core 15 GI Strips 4 x 0.8 mm ---- Pwd Electrical licenace
0.05
185239
9261.966
... More
code42 - Laying of cable in Existing Trench or GI pipe or Stone Ware or RCC Hume pipe using Wooden or Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm ---- Pwd Electrical licenace
0.05
21512
1075.629
... More
code43 - Earth work excavation by manual means for drains canals waste weir draft approach channels key trench foundation of Bridges and such similar works as per drawing and technical specifications including setting out shoring strutting barricading caution lights excavated surface leveled and sides neatlydressed disposing off or leveling the excavated stuff or sorting and stacking theselected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour tools usage and other appurtenances required to complete the work In ordinary or soft rock without blasting upto 1.5 m depth ---- Pwd Electrical licenace
19
307
5851.43
... More
code44 - Providing Laying and Fixing of GI pipes conforming to IS 1239 is to 1990 with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testing for water tightness with all lead and commissioning contractor will make his own arrangements for procuring water for testing For Heavy Duty GI Pipe etc. complete Medium Duty GI pipe of 40mm dia ---- Pwd Electrical licenace
6
502
3015.84
... More
code45 - Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz AC Supply complete 12 inch Sweep 300mm ---- Pwd Electrical licenace
4
3058
12232.28
... More
code46 - Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with ufficient length of 23 or 0.0076 inch PVC insulated twin core wire ---- Pwd Electrical licenace
4
506
2027.04
... More
code47 - Supplying capacitor type ceiling fan complete with down rod blades shackle canopies etc for operation on 230 V 50 cycles Single phase AC supply conforming to ISS 374 1979 and with double ball bearing system 48 inchs Sweep 1200 mm Regular model ---- Pwd Electrical licenace
31
3073
95279.12
... More
code48 - Fixing a Ceiling or Wall mounting fan of all capacities and all types to the existing S hook wisth fan regulator to the existing board together wisth wupplying and fixing 5amps Ceiling rose necessary length of 23 or 0.0076 inch PVC insulated twin twisted wire of approved quality mounted on a suitable size wooden board and wired ---- Pwd Electrical licenace
31
176
5460.03
... More
code49 - Extra length of GI pipe of class B 19mm dia for down rod ---- Pwd Electrical licenace
31
202
6290.21
... More
code50 - Supplying of feet LED PVC Square Batten W with high quality diffuser with Life of 25000 burning hours and 70 percent lumen maintenance with CRI greater than 80 Power Input 220 to 240V at 50Hz and Power factor greater than 0.9 along with CE approved 5 years Warranty against any manufacturing defect working under standard electrical condition LED light fitting 1 x 4 inch 36 or 40 W ---- Pwd Electrical licenace
43
1307
56204.01
... More
code51 - Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast or extruded aluminium housing with spring loaded false ceiling clA Power LEDs with CCT 6500 degree K CRI greater than 70 percent efficacy greater than 100 lumen per W 120degree beam spread life greater than 25000 burning hours and Compliance to IS 10322 or IEC 60598 LM 79 and LM 80 The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly with PF greater than 0.95 power loss should less than 5percent of lamp Wage short circuit and open circuit protection to be integrated in the circuit THD less than 20 percent Life as per LM 79. The operating input voltage should be between 130 to 275 V BIS Approved and Tested by NABL or CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition LED modular down light 2 inch x 2 inch 36 W ---- Pwd Electrical licenace
15
4689
70343.85
... More
code52 - Fixing all types and all capacities of fluorescent or False ceiling or spot light or CFL or LED fittings indoor on the wall or ceiling or rafters or girders using 23 or 0.0076 twin twisted PVC insulated wires required Nos of round blocks and clamps On wall or ceiling or Rafter or Girders ---- Pwd Electrical licenace
58
125
7288.28
... More
code53 - Supplying fixing and wiring earth electrode for grounding of lifts transformers DG sets etc using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all round with alternate layers of salt and charcoal from the bottom of the CC chamber The connection from the electrode is to be established through GI strip using GI bolts and nuts ---- Pwd Electrical licenace
4
4383
17534.72
... More
code54 - GI or Copper strips for grounding connections using necessary fixing materials as required.25 x 6 mm GI strip ---- Pwd Electrical licenace
40
131
5273.6
... More
code55 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 percent maximum light intensity should be between 60 degrees to 70 degrees CCT greater than 5500K IP66 optical and electrical compartment and impact resistance of complete luminaire greater than IK08 Power Factor greater than 0.9 with mains Surge Protection Min 5KV along with Over voltage or Overload short circuit miss wiring protection Compatible for pole mounting with outer dia of 40mm to 50mm Universal Voltage driver to operate wide voltage range from 100V to 270V 50 or 60Hz application Compliance to IS 10322 or IEC 60598 LM 79 and LM 80 Adherence with RoHS UL approved MCPCB Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools LED Light fixture with W System Power consumption LED Efficiency greater than 1301m per w nominal CRI greater than 75 Luminaire manufacturer should have in house facility accredited by NABL or CPRI and any Government certified agency and Design and Development facility certified by ISO 9001 2008 Housing with supplier word mark or name shall be Engraved or Embossing on the die cast housing or Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. ( Elec SR Vol-6 P.No.46/11.8.5) LED Streetlight 120 W ---- Pwd Electrical licenace
6
10361
62170.8
... More
code56 - Supplying and Fixing mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV or SV or MH or FTL street light fitting of all capacities on rail or RCC or wall or tubular pole using suitable clamps bolts nuts and wiring using suitable capacity wires Using 32mm dia GI Pipe ---- Pwd Electrical licenace
6
1333
8003.1
... More
code57 - RCC Pole 9 Mtr Long 145 Kg WL ---- Pwd Electrical licenace
1
7288
7288.28
... More
code58 - Erection of RCC or PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth ---- Pwd Electrical licenace
1
1146
1146.39
... More
code59 - LT 4 Pin Cross Arm GI ---- Pwd Electrical licenace
3
390
1171.11
... More
code60 - Labour for 4 Pin Cross Arm ---- Pwd Electrical licenace
3
164
494.4
... More
code61 - 11 kV Horizontal Cross Arm ---- Pwd Electrical licenace
3
501
1504.83
... More
code62 - Labour for Horizontal Cross Arm ---- Pwd Electrical licenace
3
164
494.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements