Directorate Of Municipal Administration Tender

code04 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.PAGE NO - 3 ,I -NO-2.3 SR 202-22,PART - 1-4 mm2

code05 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.PAGE NO - 3 ,I -NO-2.3 SR 202-22,PART - 1- 6 mm2

code06 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto1100V as per IS- 694:2010 ,PAGE NO-4,I-NO-2.5.3. SR 202-22,PART - 1 -3C x 2.5 mm2

code07 - Fabricating supplying and erection of 7MTRS long hot dip Galvanized Octagonal hot dip Pole with BSEN10025 grade S 355 JO steel plate for shaft,IS 2062 for base plate with door opening arrangements including suitable boards,Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for 7MTRS Pole in single section and single joint welded as per IS 9595/ IS10178AWS having dimension bottom130mm top.70mm with 3 mm thick, suitable base plate and 4Nos of 90long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended.PAGE NO - 7 ,I -NO-4.2.5 SR 202-22,PART - 1- 7 m - Top 70 mm and Bottom 130 mm dia

code08 - Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.,PAGE NO -9 ,I -NO-.4.7 SR 202-22,PART - 1- Single Arm Bracket with 1500 mm Standard 40/50 mm dia

code09 - Supplying &fixingof Porcelai fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.PAGE NO-10 ,I -NO-.5.7 SR 202-22,PART - 1- 63 A

code10 - Supplyand fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts,nut boult washers and wiring etc. complete with AC-3 Rating and as per IS-13947.- 40 A

code11 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C'Type curve indicator ON/OFF energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.Page No-13 ,Part -I 6-32 A SP

code12 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C'Type curve indicator ON/OFF energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.Page No-13 ,Part -I- 40 A TPN

code13 - Supplying, fixing and wiring rotary selector switch suitable for Ammeter Page No-14,Part -I

code14 - Supplying ....A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/ FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board The busbar shall suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc.complete Page No-15,Part -I- 100 A 4 x 30 x 6 mm Aluminium Strips

code15 - Supplying and fixing angle iron frame work fabricated out of MS.angle iron. and M.S Flat.....with bolts, washers etc.and painted with 2 coats of red oxide and then two coats of approved paint. Page No-15,Part -I- 50 x 50 x 6 mm

code16 - Fabricating supplying and mounting MS box made out....SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.Page No-15,Part -I- 14 SWG

code17 - Supplying and fixing Microprocessor based Electronit timer (without contactor Din Mounting using necessary bolts, nuts and washers etc.) 3-120sec setting.Page No-16,Part -I- LED Street light.

code18 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare cleardiffuser with Injection moulded polycarbonate material delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 percent, maximum light intensityshould be between 60 degrees to70 degrees CCT 5500K,IP66 optical and electrical compartment & impact resistance of complete luminaire IK08 PowerFacto 0.9 with mains Surge Protection- Min 5KV along with Over voltage Overload, short circuit or miss-wiring protection Compatible for pole mounting with outer dia of 40m to 50mm.Universal Voltage driver to operate wide voltage range from 100V to 270 V 50 or 60Hz application. Compliance to IS 10322 or IEC 60598 LM 79 and LM 80 Adherence with RoHS.UL approved MCPCB Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with.W System Power consumption. LED Efficiency 1301mw, nominal CRI 75 Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency and Design & Development facility certified by ISO 9001 2008 Housing with supplier word mark or name shall be Engraved or Embossin on the die cast housing or Body part. Warranty of 2 Years against any manufacturing defect Page No 36 Part I LED Streetlight 70W

code19 - Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.Page No- 45,Part -I

code20 - Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws Part - I chapter -2,Page No -6.

code21 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. CIVIL SR 2022-23 OF V-I PAGE NO-8, I-1.13 -2.0 X .9 X .90 = 1.62 x30 = 320x5%=336- Depth exceeding 1.5 m, but not exceeding 3 m

code22 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap /basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as petechnical specifications. (The cost of steel reinforcement & formwork shall be paid separately) CIVIL SR 2022-23 OF V-I PAGE NO-15, I-2.1,2.1.2 - 0.032 X 40 = 1.28 -Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates 5364 x 5% =268.2 +5364 =5632.2

code23 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) ) CIVIL SR 2022-23 OF V-I PAGE NO-13, I-2.1,2..21.1

code24 - Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation/Substructure/Super structure complete as per Drawing and Technical Specifications.CIVIL SR 2022-23 OF V-III, PAGE NO-108 CHAPTER - 9,,l.No-9.3

code25 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 PART - III PAGE NO -9 LED Streetlight 70W

code26 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 PART - III PAGE NO -9 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)

code27 - Laying of cable in Existing Trench/GI pipe/ Stone Ware /RCC Hume pipe using Wooden /Aluminum Rollers as directed by the departmental staff PART-IV, PAGE NO-9 LT Cable 2.5 to 25 Sqmm

code28 - Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed.PART IV , PAGE NO-8

code29 - Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtr PAGE NO -8 PART -IV

code30 - GI Pipe B - Class as per IS-1239 PAGE NO -16 PART NO- III- GI Pipe - 50 mm Dia

code31 - Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete. PAGE NO -8 PART -IV

code32 - HDPE/PLB Pipe 40/33 mm PAGE NO -26 RART - III

code33 - GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg PAGE NO - 9 PART III

code34 - Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

code35 - Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

code36 - Digging of Pit for providing GI Pipe type Earthing LABOUR RATE- Ordinary Soil PART -IV PAGE NO-2

code37 - 8 SWG GI Wire MT PER KG (4.064 mm Dia), Std Wt: 125 Kg/KM PAGE NO - 9 PART -III

code38 - Brass Cable Gland PAGE NO -25- 25 mm

code39 - Aluminium End Terminal (Lug) PAGR NO - 21 PART-II10 Sqmm

code40 - Aluminium End Terminal (Lug) PAGR NO - 21 PART-II 16 Sqmm