Directorate Of Municipal Administration Tender

14.13 - Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.r 160mm(weight of pipe -3.923 kg) (As per PWD common SR2023-24 Volume-V, Page No.120, I.No.10.14.13 )

13.6.1 - Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc, Complete (1.00 HP/0.75KW)7 STG) (As per PWD SR2023-24 Volume-V, Page No.149, I.No.13.6.1)

13.23.1 - Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter etc. complete Upto 3 HP pumps (As per PWD SR 2023-24 Volume-V, Page No.155, I.No.13.23.1)for outdoor:

12.83.2 - Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance Plus or Minus 1mm), with wall thickness 2.0 mm (Plus or Minus 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1mm (Plus or Minus 0.1 mm) wall thickness and 3 nos.stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section PWD CSR 2023-24, Vol-II, P. No. 108, I. No. 12.83.2

12.92 - Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm X 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) PWD CSR 2023-24, Vol-II, P. No. 111, I. No. 12.92

13.34 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. PWD CSR 2023-24, Vol-II, P. No. 123, I. No. 13.34

10.1.1 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc, Complete For, PVC pipes 25mm dia, 10 kg/sqcm & class 5 (DSR Volume-V I.No.10.1.1 P.No.

14.55a - Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete Economy Class PWD CSR 2023-24, Vol-II, P. No. 139, I. No. 14.55a

14.32.4 - Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm (PWD CSR 2023-24, Vol-II, P. No. 136, I. No. 14.32.4)

2.3.4 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.4 Sqmm (P.no.5.it.no.2.3.4) (PWD CSR for Electrical Works for the Year 2023-24)

3.6.1 - Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way (P.no.9.it.no.3.6.1) (PWD CSR for Electrical Works for the Year 2023-24)

11.15.5 - Supplying&fixingof retrofit type-LEDbulb WwithOPALacrylic diffusercomprising of LEDsourcewithCCT6500degree K,CRI Greater than70 Percentage. efficacy Grater Than 80 lumen per W,life Grater Than 25000 burninghoursandCompliance toIS 10322/IEC60598,LM79&LM80. The LED are drivenbyHFelectronic driver integratedinthesystem,withPF rater Than0.95,power lossshould Less Than5 Percentage of lampWage., short circuit&opencircuitprotectiontobe integrated inthe circuit, THDless than 20 Percentge, Life as per LM79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. (12W, 6500K) (Volume-VI I.no-11.11.5 P.No.47)

1.14.1 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. ( In all kinds of soils Depth upto 3 m (COMMON SCHEDULE OF RATES FOR ENGINEERING DEPARTMENTS 2023 - 2024 GOVERNMENT OF KARNATAKA VOLUME - 1 I.No.1.14.1 P.No.08)

2.1.2 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. (Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates) (COMMON SCHEDULE OF RATES FOR ENGINEERING DEPARTMENTS 2023 - 2024GOVERNMENT OF KARNATAKA VOLUME - 1 I.No.2.1.2 P.No.15)

5.3 - Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 2 Item No 5.3, P.No.09)

2.3.1 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates VOL-1 PWD DSR 2023-24 I.NO 2.3.1 P NO:16

2.3.1 - Formwork shall be added on percentage basis to the finished concrete item rate for Drain formwork shall be considerd as 50% DSR 2023-24 Volume-II Page No. A(7)

2.5.1 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. VOL-1 PWD DSR 2023-24 I.NO 2.5.1 P NO:16 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

2.5.1 - Formwork shall be added on percentage basis to the finished concrete item rate for Drain formwork shall be considerd as 70% DSR 2023-24 Volume-II Page No. A(7)

2.11h - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (All other type of structures)(COMMON SCHEDULE OF RATES FOR ENGINEERING DEPARTMENTS 2023 - 2024 GOVERNMENT OF KARNATAKAVOLUME - 1, P.No.71, I.No.2.11 h)

6.8 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ( public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 2 I.No.6.8 P.No.14)

8.8 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 2 I.No.8.8 P.No.42)

8.27 - Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 2 I.No.8.27 P.No.45)

8.39 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (public works department SCHEDULE OF RATES for BUILDINGS 2023 - 2024 VOLUME - 2 I.No.8.39 P.No.48)

940 - Structural steel such as tees, angles channels and R.S. joists (public works department SCHEDULE OF RATES for BUILDINGS 2021 - 2022 VOLUME - 2 Item No 940, P.No.A-40

1.12 - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. (In all kinds of soils upto 300 mm depth) (COMMON SCHEDULE OF RATES FOR ENGINEERING DEPARTMENTS 2023 - 2024 GOVERNMENT OF KARNATAKAVOLUME - 1 P.No.8, I.No.1.12)

3.6 - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (SCHEDULE OF RATES FOR ROAD AND BRIDGE WORKS 2023 - 2024 PUBLIC WORKS DEPARTMENT GOVERNMENT OF KARNATAKA VOLUME - 3 P.No.17, I.No.3.6(305))

4.17 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (SCHEDULE OF RATES FOR ROAD AND BRIDGE WORKS 2023 - 2024 PUBLIC WORKS DEPARTMENT GOVERNMENT OF KARNATAKA VOLUME - 3 P.No.26, I.No.4.17 (406))

6.8.1 - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in charge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification) (WMM/WBM Base to be paid separately as per relevant technical specification. (SCHEDULE OF RATES FOR ROAD AND BRIDGE WORKS2023 - 2024 PUBLIC WORKS DEPARTMENT GOVERNMENT OF KARNATAKA VOLUME - 3 I.No.6.8.1 P.no51)

2.1.4 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. 2.1.4 Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates KPWD SR 2023-24 VOL-1 I NO 2.1.4 P No 15

1.14.1 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. ( In all kinds of soils Depth upto 3 m) (COMMON SCHEDULE OF RATES FOR ENGINEERING DEPARTMENTS 2023 - 2024 GOVERNMENT OF KARNATAKAVOLUME - 1 P.No.8, I.No.1.14.1)

2.1.3 - Providing and laying in position Cement Concrete for levelling course for all works in foundation.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Volume-I (DSR 2023-24, I.No.2.1.3, P.No.15)

2.11h - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (All other type of structures)(COMMON SCHEDULE OF RATES FOR ENGINEERING DEPARTMENTS 2023 - 2024 GOVERNMENT OF KARNATAKAVOLUME - 1, P.No.71, I.No.2.11 h)

2.4.2 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Substructure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal sizegraded crushed coarse aggregates VOL-1 PWD DSR 2023-24 I.NO 2.4.2 P NO:16

A-7 - Formwork shall be added on percentage basis to the finished concrete item rate for Drain formwork shall be considerd as 35% DSR 2023-24 Volume-II Page No. A(7) Item No.22-2

10.14.1 - Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc.complete (Volume-V P.No.120 I.No.10.14.10 160mm(weight of pipe -3.923 kg)

10.14.1 - Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc.complete (Volume-V P.No.120 I.No.10.14.10 110mm(weight of pipe -1.894 kg)

4.5.1 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 7 percent, maximum light intensity should be between 60 degrees to 70 degrees. CCT Greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire Greater than IK08. Power Factor Greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency Greater than1301m/w, nominal CRI Greater than75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.(LED Streetlight 150 W) (PWD Ele SR 2-23-24 Volume-6 I.No.4.5.1 P.No.13)

11.8.2 - Supply of LED Street light luminaire with pressure diecastaluminium housing body for optimalthermaldissipation. Lampcompartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light out put Rated life Burning Hrs50000hr at Lumen Maintenance of 70 Percent, maximumlightintensityshouldbebetween60degreesto70degrees.CCT Grater Than 5500K,IP66opticalandelectricalcompartment&impactresistanceofcompleteluminaireGrater than IK08.PowerFactorGrated Than 0.9withmains,SurgeProtection-Min5KValongwithOvervoltage/Overload,shortcircuit/miss-wiringprotection.Compatibleforpolemountingwithouterdiaof40mmto50mm.UniversalVoltagedrivertooperatewidevoltagerangefrom100Vto270V50/60Hzapplication.CompliancetoIS10322/IEC60598,LM79&LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimizedminimaltools.LEDLightfixturewith WSystemPowerconsumption.LEDEfficiencyGrater Than1301m/w,nominalCRIGrater Than75.Luminairemanufacturershouldhavein-house facilityaccreditedby NABL/CPRI&anyGovernmentcertifiedagency&Design&DevelopmentfacilitycertifiedbyISO9001:2008.Housingwithsupplierwordmark/nameshallbeEngraved/Embossingonthediecasthousing/Bodypart.Warrantyof2YearsagainstanymanufacturingdefectworkingunderstandardelectricalconditionsasmentionedaboveshouldbegivenbyLEDmanufacturer&Cree/Nichia/Lumileds/Osram make LED Source.(LED Streetlight 40W) (PWD Ele SR 2-23-24 Volume-6 I.No.11.8.2 P.No.45,46)

1.1 - For KEB Meter