Directorate Of Municipal Administration Tender

KSRB 14.6-2 :Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per sqm over 50mm thick sand bed (average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and HOM of machineries complete as per specifications. Specification No. KBS ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

Providing and fixing Pre cast solid concrete kerb stones made out of CC 1:2:4 and finished with CM 1:3 plastering and finishing cutting etc., complete. - of size 450 x 150 x 500 mm ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

KSRRB M800- Painting Letters KSRRB M800-6. Painting two coats on New Concrete Surface : Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces complete as per specifications. MORTH Specification No. 803 ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

KSRB 15-18.2 : Providing and applying enamel metal paint two coats ( excluding priming coat ) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications. ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

KSRRB M300-19. Removal of unserviceable soil including excavation, loading and disposal but excluding replacement by suitable soil which shall be paid separately as per clause 300.5 complete as per specifications. MORTH Specification No. 301 ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

Providing and fixing RCC name board of size 1.35xk0.60x0.04 mtrs fixed in reinforced cement concrete poles of size 0.1OxO.1Ox2.60mtrs in cement concrete M 20 proportion using 20mm and down size graded metal machine mixed with 1Omm dia main steel bars and 8mm dia stirups. The board shall be provided with 12mm thick cement plaster in cement mortar 1 :3 on both the sides. The poles shall be embedded in the ground for a depth of0.5 mtrs with cement concrete M 10 proportion. The board shall be fixed as per the drawing and atthe place indicated by the Engineer incharge of the work. The cost includes excavation, bare cost of all materials, cost of steel, centering, transportation charges, fixing charges, labour, HOM etc., The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

Supply and fixing of Bicycle. Metal: All tubular steel of 2.5mm thickness are galvanized and zinc dipped. Joints are Robotic welded. All welded joints are scalloped as necessary and welded to an apprvoed MIG Process. All welds are dressed off removing all sharp edges and burrs. Zinc Primer paint is applied at all the welding points prior to dinishing. All metal parts are powder coated using AKZO nobel-Great Wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray macjine that uses a 5% NaCI solution in accordance to ISO7227 to speed up corrosion for 3000 Hrs. Rubber: High quality grip rubber is used for the hadles. Bearings: Maintenance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN 16630 and the maintenance guide. Safety: All products must be tested ans certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified internaltional certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS Mark EN16630 Cetificates must be in the name of tendering party and not any 3rd Party. Size_L x W x H: 1000 x 498 x 1290mm, Weight: 51.5 KG, Safety Area: 3400 x 3498 mm, Capacity_ 1 Person ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

Supply & Fixing of HD Sit Up Station. Metal: All tubular steel of 2.5MM thickness are glavanized and zinc dipped. Joints are Robotic welded. All welded joints are scalloped as necessary and welded to an apprvoed MIG Process. All welds are dressed off removing all sharp edges and burrs. Zinc Primer paint is applied at all the welding points prior to dinishing. All metal parts are powder coated using AKZO nobel-Great Wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray macjine that uses a 5% NaCI solution in accordance to ISO7227 to speed up corrosion for 3000 Hrs. Rubber: High quality grip rubber is used for the hadles. Bearings: Maintenance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN 16630 and the maintenance guide. Safety: All products must be tested ans certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified internaltional certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS Mark EN16630 Cetificates must be in the name of tendering party and not any 3rd Party. All products must clearly deplay the GS Mark as has been issued in the EN 16630 safety certificates. Size_LxWxH: 1412 x 1366 x 650 mm. Weight: 42.6 KG Safety Area: 4462 x 4078 mm, Capacity 2 Persons ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

Supply and fixing of Seated Chest Press. Metal: All tubular steel of 2.5MM thickness are glavanized and zinc dipped. Joints are Robotic welded. All welded joints are scalloped as necessary and welded to an apprvoed MIG Process. All welds are dressed off removing all sharp edges and burrs. Zinc Primer paint is applied at all the welding points prior to dinishing. All metal parts are powder coated using AKZO nobel-Great Wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray macjine that uses a 5% NaCI solution in accordance to ISO7227 to speed up corrosion for 3000 Hrs. Rubber: High quality grip rubber is used for the hadles. Bearings: Maintenance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN 16630 and the maintenance guide. Safety: All products must be tested ans certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified internaltional certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS Mark EN16630 Cetificates must be in the name of tendering party and not any 3rd Party. All products must clearly deplay the GS Mark as has been issued in the EN 16630 safety certificates. All poducts must carry a GS mark on it. Size_L x W x H: 1955 x 733 x 2058mm, Weight: 86.6 KG, Safety Area: 5545 x 4470mm, Capacity 2 Person ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

Supply & Fixing of HD Health Walker. Metal: All tubular steel of 2.5MM thickness are glavanized and zinc dipped. Joints are Robotic welded. All welded joints are scalloped as necessary and welded to an apprvoed MIG Process. All welds are dressed off removing all sharp edges and burrs. Zinc Primer paint is applied at all the welding points prior to dinishing. All metal parts are powder coated using AKZO nobel-Great Wall powder to the thickness of 80-120 microns. All metal parts are tested in our salt spray macjine that uses a 5% NaCI solution in accordance to ISO7227 to speed up corrosion for 3000 Hrs. Rubber: High quality grip rubber is used for the hadles. Bearings: Maintenance free ball bearings. Scope of Delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN 16630 and the maintenance guide. Safety: All products must be tested ans certified to meet EN16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified internaltional certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS Mark EN16630 Cetificates must be in the name of tendering party and not any 3rd Party. All products must clearly deplay the GS Mark as has been issued in the EN 16630 safety certificates. Size_LxWxH: 1065 x 615 x 1364 mm. Weight: 51 KG Safety Area: 4090 x 3555 mm, Capacity 1 Person ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

Supply and fixing of Bitter bins in FRP of height not more than 1100 mm high having openable shutter of various shapes in trees animals etc complete (Including KVAT)(vide Data Rate) ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

RainbowClimberLK-CL-81 All round and rectangular pipes GI or CR,ISImake Gauge 14 Gauge 2 Coating are red oxide and final paints of industrial paint, Nut bolt GI Bearing avy,(branded) FRP THICKNESS 4-5MMSwing assembly 6mm chain with rubber coating Length-12 Ft Widht-2 Ft Hight-5 Ft ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

SeaSawDouble-LK-SS-63 All round and rectangular pipes are GI or CR,ISI Make Gauge 14 Gauge 2 coating are red oxide and final paints of industrial paint Nut bolt GI Bearing heavy (brabded) FRP thickness 4-5mm Swing assembly 6mm chain with rubber coating Length-8 Ft Widht-5 Ft Hight- 2 Ft ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

Arch Swing Two seater LK -SW-51All round and rectagular pipes are GI or CR,ISIMAKEGauge 14 gauge2 coating are red oxide and final paints of industrial paintNut bolt GIBearing heavy (branded)FRP thickness 4-5mmswing assembly 6mm chain with rubber coatingLength-10 Ft Widht-5 Ft Hight- 9 Ft ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

Two way slideAll round and rectangular pipes are GI or CR,ISIMakeGauge 14 gauge2 coating are red oxide and final paints of industrial Paint nut bolt GIBearing heavy (branded)FRP thickness 4-5mmSwing assembly 6mm chain with rubber coatingLength-15Ft Widht-20 Ft ,Hight- 9 Ft ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

Standing Mary go roundAll round and rectangular pipes are GI or CR,ISI Make Gauge 14 gauge2 coating are red oxide and final paints of industrial paintm Nut bolt GI Bearing heavy (branded)FRP thickness 4-5mmSwing assembly 6 mm chain with rubber coating Diameter-4 Ft Hight- 4 Ft ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

FRB Dust bins of 3mm thickness.Made with UV Gel coast of reputed company. FRP made with 450 emulsion glass reinforced stunned mats of repute company.FRP doors of 3mm thickness for outlets. Holdfast of 3mm thickness of MS powder coat.Painted with UV-PU emulsion paints ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.

Two way slideAll round and rectangular pipes are GI or CR,ISIMakeGauge 14 gauge2 coating are red oxide and final paints of industrial Paint nut bolt GIBearing heavy (branded)FRP thickness 4-5mmSwing assembly 6mm chain with rubber coatingLength-15Ft Widht-20 Ft ,Hight- 9 Ft ---- The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work. The rates are inclusive of all lead and lift, hire chargers of machinery, labour, incidental charges all etc complete.